Send attachment (jpg) in scenario Mail to Mail

Hi all,
I have a scenario mail to mail (Mail Adapter) with attachments (jpg image). I receive an email that contains a jpg image and I would like to send it by mail too.
The scenario is working fine, but when the jpg image arrives is destroyed.
I'm using the logic of this blog:
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
but, it doesn't work in my scenario (mail adapter).
Plz help me !!!
Thanks,

Hi,
this document is about a jpg scenario file to mail:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
Hope it helps.
Regards
Patrick

Similar Messages

No longer able to attach .jpg images in Mail...

I'm having problems attaching .jpg images in Mail. This problem started two or three days ago. I can attach .zip files, but I'm unable to attach .pdf or .jpg files. I have not tried other formats, as these are the two most common formats used.
Has anyone else experienced this issue?
Cheers. -m

There was a discussion posted on this a while back:
http://discussions.apple.com/thread.jspa?threadID=1545970&start=0&tstart=0
I get this problem on my PPC, but not my Intel machine. Instead of using Server Admin, best to set this value (maxAttachmentSize) in the /etc/wikid/wikid.conf file. The value in Server Admin will still show '0', but I was still able to attach files up to the size I specified in the wikid.conf file.

Attaching jpg images in Mac Mail - sending to a PC

I've been looking for some current information on this problem. Most of the posts seem to be years old. Is there a working solution to attach images to an email and allow a PC user to download them like a regular attachment?

I am having the same problem with only a select few of clients. Sending pdf - fine, they arrive as attachments. Send a jpg and they are embedded within the email and they have to copy and paste the image out of their email into another program - thus risking the quality of their computers capacity to provide a good image. Then another client has no problem. Read everything, click on everything. I can buy a iconizer, but why do I need to buy a program to simple get the jpg to the client. And why do I need to read every post back to 2003 on why Outlook does this so I can use my simple - attach file within the mac mail. So now I have to go within my computer - control click and save the file into a zip - sometime adding another folder to group them all together. More clutter on my computer.
This is what is frustrating. Go on mac posts to find answers - they have you click on all these buttons and stuff. Go to pc outlook google searches and they have them clicking and doing all sorts of fixes. Can't these two computer software groups figure this out.
If it was happening on every client - then I would think it was me. If was happening on every outlook client - I mean everyone outlook receiver - then it is outlook, but it only happens with a few. What button within outlook does the client need to click on or off - it is that simple.
I might sound frustrated but I'm not. By the post out on the net that I read - this is happening a lot but no one specific answer seems to work. And it is all related to me with the client's outlook email service.

When I send a jpg to a PC in Mail. The image gets embedded and can no t be downloaded. How do I keep it as an attachement?

When I send a jpg to a PC in Mail. The image gets embedded and can no t be downloaded. How do I keep it as an attachement?

In you broswer? I'm using Mail App that came with My Mac. Do you know how to do it through there?

Need to send the zip file to mail as an attachment

i want to pick the zip file which consists some 2,3 files inside it. and send as it is to mail as an attachment.what i did is
i have taken one zip file,,, "testing.zip" inside it i have "test1.txt" & "test2.csv"
i created sender CC ,,in that i used module payloadzipbean and unzipped and called the file adapter.. created reciever CC as mail ..used same payload module now here i zipped all the payloads.
Result..i see the attachment coming as "test1.txt.zip" ..here i can see inside this zipfile my original file names as "test1.txt"&"test2.csv" as i enabled ASMA in both CC.
issues:i am unable to get the original file name like "testing.zip" ,,
can anyone help me in this.
Regards,
Loordh

Hi all,
as i posted last time my requirement ,i am going with java mapping for my scenario. i am using this code .
http://wiki.sdn.sap.com/wiki/display/XI/Dynamicfilenameforpass-through+scenario
this is working perfect for zip file (file to file) scenario. but my scenario is file to mail ..as i need to send this to mail package there it is throwing error.i am getting "zip file name as attachment properly but when i try to open it is giving error in zip file." this is what i modied code ..i am able to see my messge in sender CC and reciever CC..any java experts please help on this.
try {
// create XML structure of mail package
String output = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>"
+ "<ns:Mail xmlns:ns=\"http://sap.com/xi/XI/Mail/30\">"
+ "<Subject>" + mailSubject + "</Subject>"
+ "<From>" + mailSender + "</From>"
+ "<To>" + mailReceiver + "</To>"
+ "<Content_Type>multipart/mixed; boundary=\"" + boundary + "\"</Content_Type>"
+ "<Content>";
out.write(output.getBytes());
// create the declaration of the MIME parts
//First part
output = "--" + boundary + CRLF
+ "Content-Type: text/plain; charset=UTF-8" + CRLF
//+ "Content-Transfer-Encoding: 8bit" + CRLF
+ "Content-Disposition: inline" + CRLF + CRLF
+ mailContent + CRLF
//Second part
+ "--" + boundary + CRLF
+ "Content-Type: Application/zip; name=" + attachmentName + CRLF
//+ "Content-Transfer-Encoding: base64" + CRLF
+ "Content-Disposition: attachment; filename=" + attachmentName + CRLF + CRLF;
out.write(output.getBytes());
//Source is taken as attachment
copySource(in, out);
out.write("</Content></ns:Mail>".getBytes());
} catch (IOException e) {
throw new StreamTransformationException(e.getMessage());
protected static void copySource(InputStream in, OutputStream out)
throws IOException {
byte[] bbuf = new bytehttp://in.available();
int bblen = in.read(bbuf);
if (!(bblen < 0)) {
//String sbuf = new String(bbuf);
//String encoded = Base64.encode(sbuf);
// replace all control characters with escape sequences
//sbuf = sbuf.replaceAll("&", "&");
//sbuf = sbuf.replaceAll("\"", """);
//sbuf = sbuf.replaceAll("'", "'");
//sbuf = sbuf.replaceAll("<"<");
//sbuf = sbuf.replaceAll(">", ">");
out.write(bbuf);}}

Sending jpg attachments in Mail to Windows 8

When I send a jpg attachment from my iMac 10.9.4 to a Windows 8 laptop the recipient sees only a square with an X in it. Is there something I need to do that will make it possible for them to see the jpg?

Make sure you send Windows-friendly attachments. To do so for all messages, from the main Mail window choose Edit > Attachments, then make sure Always Send Windows-Friendly Attachments is selected. For a specific message, click the Attach button in the toolbar of the message window, then make sure Send Windows-Friendly Attachments is selected.
Also use filename extensions (such as document.jpg).
If the recipient sees two attachments (such as “MyFile” and “._MyFile”), the file with the underscore (such as “._MyFile”) can be ignored.

Send PDF form to e-mail as attachment with a PHP script on the server

Hi,
For several days I've been searching though the internet looking for a solution, a quite simple one in my opinion, but I got a little desperate not getting any result I want.
Okay. The Situation.
I have a PDF form to order sandwiches and drinks.
The PDF has serveral area's and columns where customers fill in the amount of the products they would like to order.
At a position of a field, the kitchen can almost blindly see what products a customer ordered.
Therefore, when someone fills in the form, I want to send the filled PDF by e-mail to the kitchen's e-mail adress. And important: the PDF in the kitchen's mailbox should be completely identical to the form the customer filled in.
So, I have an Order button in my form. I set the action as 'Submit a form'.
In the settings under 'Enter a URL for this link' I used just some PHP mailer script I also use on my website contact form.
IF I check 'HTML' under 'Export Format' the PHP mailer works fine. I receive an HTML e-mail listed the ordered products.
BUT
I do want the original filled PDF in my mailbox instead of an HTML e-mail.
So, for 'Export Format' I checked 'PDF The Complete Document'.
But then my PHP mailer script doesn't work anymore.
It gives errors like 'no valid e-mail adres' , etcetera etcetera.
Who has a solution?
Who has a working standard PHP script for me what just sends the kitchen an empty mail with the original PDF as attachment?!
There is no need to use any database or other more complex functionality. Just mail the filled PDF.

You can submit whole PDF format as long as you enable usage rights on the PDF.
Normally Adobe Reader users can only submit the data, XFDF, FDF, XDP, XML.
To enable usage rights on the PDF you will need to use Adobe Acrobat Std/Pro.
As for the PHP Script; it depends on your PHP web server capabilities.
The script will be slightly different, if the server uses PHP Mail or PHP PEAR.
Just attach the submission to an email and send.
If the client is submitting the form from a standalone pdf reader app, you can also respond with a success or failure FDF \status message; otherwise, you can redirect to a success / failure URL.
For more information and online examples:
http://www.pdfemail.net/examples/

Send attachment though mail using FM SO_NEW_DOCUMENT_ATT_SEND_API1

Hello Gurus,
Please help me with the mail sending attachment(excel file) using FM SO_NEW_DOCUMENT_ATT_SEND_API1.
Here is the actual problem.
I am using the FM SO_NEW_DOCUMENT_ATT_SEND_API1 in my prog.
My attachment(excel sheet which is taken from internal table) contains the 10 records with one header description and data related to that description.
I am able to send the attachment but the records in the attachment has more than 255 characters nearly 700 character length.
So I spilt up each internal table record(with structure type solisti1) into 3 internal table records and populated it.
It is showing the entire record in the attached file but I am not able to see some fields which are embeded deeply inside the cells.
And they are not having any proper allignment.
Please do help me.
Promise to reward points.
Mac

Here is the sample code....
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1   OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
Creating the document to be sent
DOC_CHNG-OBJ_NAME = 'OFFER'.
DOC_CHNG-OBJ_DESCR = 'Auction of a Picasso jr'.
OBJTXT = 'Reserve price : $250000'.
APPEND OBJTXT.
OBJTXT = 'A reproduction of the painting to be auctioned'.
APPEND OBJTXT.
OBJTXT = 'is enclosed as an attachment.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creating the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'RAW'.
APPEND OBJPACK.
Creating the document attachment
(Assume the data in OBJBIN are given in BMP format)
OBJBIN = ' \O/ '. APPEND OBJBIN.
OBJBIN = '     '. APPEND OBJBIN.
OBJBIN = ' / \ '. APPEND OBJBIN.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'picasso.bmp'. APPEND OBJHEAD.
Creating the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'BMP'.
OBJPACK-OBJ_NAME   = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Reproduction object 138'.
OBJPACK-DOC_SIZE   = TAB_LINES * 255.
APPEND OBJPACK..
Entering names in the distribution list
RECLIST-RECEIVER = '<name>@yahoo.com'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
RECLIST-RECEIVER = 'DLI-NEUREICH'.
RECLIST-REC_TYPE = 'P'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
         DOCUMENT_DATA = DOC_CHNG
         PUT_IN_OUTBOX = 'X'
         COMMIT_WORK   = 'X'
    TABLES
         PACKING_LIST = OBJPACK
         OBJECT_HEADER = OBJHEAD
         CONTENTS_BIN = OBJBIN
         CONTENTS_TXT = OBJTXT
         RECEIVERS     = RECLIST
    EXCEPTIONS
         TOO_MANY_RECEIVERS = 1
         DOCUMENT_NOT_SENT = 2
               OPERATION_NO_AUTHORIZATION = 4
               OTHERS = 99.
     CASE SY-SUBRC.
       WHEN 0.
         WRITE: / 'Result of the send process:'.
         LOOP AT RECLIST.
           WRITE: / RECLIST-RECEIVER(48), ':'.
           IF RECLIST-RETRN_CODE = 0.
             WRITE 'sent successfully'.
           ELSE.
             WRITE 'not sent'.
           ENDIF.
         ENDLOOP.
       WHEN 1.
     WRITE:
     / 'no authorization to send to the specified number recipients!'.
       WHEN 2.
         WRITE: / 'document could not be sent to any of the recipient'.
       WHEN 4.
         WRITE: / 'no authorization to send !'.
       WHEN OTHERS.
         WRITE: / 'error occurred during sending !'.
     ENDCASE.
Regards,
Pavan.

Whenever I send an e-mail with my yahoo account which is also my apple ID a small icon (personal) picture is attached to the e-mail. How do I remove this picture from being attached to all of my outgoing messages?

Everytime I send a message from my yahoo account (which is also my appleID account) a small icon picture (which is a pic of my ex-boyfriend) is attached to the e-mail heading. I'm able to notice I want to remove this from happening. The picture is displayed on my iphone when I open up the mail.
Steps I take:
1. I write an e-mail message from my yahoo account to my other .edu account on a desktop computer.
2. I send the e-mail message from my yahoo account to my other .edu account on a desktop computer.
3. When I open up my .edu account on my iPHONE, there is a new message from my yahoo account.
4. Upon opening the e-mail message on my iPHONE, in the title heading it has the title of the email along with a small (upper right) picture on the iPHONE.
Another thing that I tested was the same thing on my iPAD for text messages:
1. I set up my text messages to my yahoo account (which is also my apple ID account)
2. I send a text message to a person and the same small icon picture is shown on the ipad with each message that is sent
3. The person receiving the text message does not get the small icon picture; however, on the ipad it shows this picture (WHICH NEEDS TO BE REMOVED)
I need to determine how this icon picture is associated with both my yahoo and apple ID account. The funny thing is that I don't have this picture on any of my devices (mac, iphone, ipad). It has been completely removed from all of my technology sources. I'm thinking it has to be something to do with the origniation of my apple ID.
PLEASE HELP ME....this picture is hurting my professionalism when I send outgoing messages.
Thanks.

search google for "iphone remove picture from contact"

Sending an excel spreadsheet attachment on an E-Mail

Afternoon,
Based upon program BCS_EXAMPLE_5 I have created a program that generates an e-mail and creates a spreadsheet attachment. The problem I have is how do get the contents of an internal table into the spreadsheet attachment?
My attempt at resolving the problem has been as follows:-
I have declared a variable document which points to the class cl_document_bcs. I have then instantiated the variable using a static method. I then call the method add_attachment (document->add_attachment) and pass the text content which contains two lines of text.
This creates a spreadsheet will the two lines of text in the first cell.
Could I use the binary content instead? If so how do I declare a variable that has the same type as a work area of binary content because this has a data type of RAW.
Any assistance would be very much appreciated. A copy of my code can be seen below:-
Thanks and regards
John.
REPORT bcs_example_5.
This example shows how to send
- a simple text provided in an internal table of text lines
- and an attached MS word document provided in internal table
- to some internet email address.
All activities done via facade CL_BCS!
DATA: send_request       TYPE REF TO cl_bcs.
DATA: text               TYPE bcsy_text.
DATA: text_content       TYPE soli_tab.
DATA: wa_text_content    TYPE soli.
DATA: binary_content     TYPE solix_tab.
DATA: wa_binary_content TYPE solix.
DATA: document           TYPE REF TO cl_document_bcs.
DATA: sender             TYPE REF TO cl_sapuser_bcs.
DATA: recipient          TYPE REF TO if_recipient_bcs.
DATA: bcs_exception      TYPE REF TO cx_bcs.
DATA: sent_to_all        TYPE os_boolean.
Data to be included in the spreadsheet
DATA: text2(100) TYPE c VALUE 'ABC'.
DATA: int TYPE i VALUE 258.
DATA: buffer TYPE xstring.
DATA: conv TYPE REF TO cl_abap_conv_out_ce.
START-OF-SELECTION.
PERFORM main.
      FORM main                                                     *
FORM main.
TRY.
    -------- create persistent send request ------------------------
      send_request = cl_bcs=>create_persistent( ).
    -------- create and set document with attachment ---------------
    create document from internal table with text
      APPEND 'Hello world!' TO text.
      document = cl_document_bcs=>create_document(
                      i_type    = 'RAW'
                      i_text    = text
                      i_length = '12'
                      i_subject = 'test created by BCS_EXAMPLE_5' ).
    add attachment to document
    BCS expects document content here e.g. from document upload
    binary_content = ...
*TRY.
     conv = cl_abap_conv_out_ce=>create(
          encoding                      = 'UTF-8'
          endian                        = 'L'
   REPLACEMENT                   = '#'
   IGNORE_CERR                   = ABAP_FALSE
CATCH CX_PARAMETER_INVALID_RANGE .
CATCH CX_SY_CODEPAGE_CONVERTER_INIT .
**ENDTRY.
     CALL METHOD conv->write( data = text n = 4 ).
     CALL METHOD conv->write( data = int ).
     buffer = conv->get_buffer( ).
      wa_text_content = '1234567890ABCDE'.
      APPEND wa_text_content TO text_content.
      wa_text_content = '1234567890ABCDE'.
      APPEND wa_text_content TO text_content.
      wa_binary_content = buffer.
     APPEND wa_binary_content TO binary_content.
     wa_binary_content = '11111111'.
     APPEND wa_binary_content TO binary_content.
      CALL METHOD document->add_attachment
        EXPORTING
          i_attachment_type    = 'XLS'
          i_attachment_subject = 'c:\temp\book2'
          i_att_content_text   = text_content.
         i_att_content_hex    = binary_content
    add document to send request
      CALL METHOD send_request->set_document( document ).
    --------- set sender -------------------------------------------
    note: this is necessary only if you want to set the sender
          different from actual user (SY-UNAME). Otherwise sender is
          set automatically with actual user.
      sender = cl_sapuser_bcs=>create( sy-uname ).
      CALL METHOD send_request->set_sender
        EXPORTING
          i_sender = sender.
    --------- add recipient (e-mail address) -----------------------
    create recipient - please replace e-mail address !!!
      recipient = cl_cam_address_bcs=>create_internet_address(
                                        '[email protected]' ).
    add recipient with its respective attributes to send request
      CALL METHOD send_request->add_recipient
        EXPORTING
          i_recipient = recipient
          i_express   = 'X'.
    ---------- send document ---------------------------------------
set send immediately flag
      CALL METHOD send_request->set_send_immediately( 'X' ).
      CALL METHOD send_request->send(
        EXPORTING
          i_with_error_screen = 'X'
        RECEIVING
          result              = sent_to_all ).
      IF sent_to_all = 'X'.
        WRITE text-003.
      ENDIF.
      COMMIT WORK.
*                     exception handling
* replace this very rudimentary exception handling
* with your own one !!!
    CATCH cx_bcs INTO bcs_exception.
      WRITE: 'Fehler aufgetreten.'(001).
      WRITE: 'Fehlertyp:'(002), bcs_exception->error_type.
      EXIT.
ENDTRY.
ENDFORM.                    "main

Hi,
See the Blog..
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Here is the example program to send the EXCEL as a attachment in a email
http://www.erpgenie.com/sap/abap/code/abap58.htm
Regards
Sudheer

How to send concurrent program output file as an attachment in the notification mail

Hi All,
We are on Oracle apps version - 11.5.10.2
We have a requirement wherein we need to send the concurrent program output file as an attachment while sending the notification mail to the user.
Currently we have tried the approach wherein we are specifying the user id in the OPTIONS tab (Notifying the following people) while submitting the concurrent program.
But using this approach, the user gets only the URL of the output file in the notification mail and not the output file as an attachment.
Kindly let us know if anyone has incorporated the logic to send the output file as attachment in the notification mail.
Please Note - We do not want any custom code to be written to send the attachment.
Any pointers to this will be helpful.
Regards,
Shruti

Hi All,
We are on Oracle apps version - 11.5.10.2
We have a requirement wherein we need to send the concurrent program output file as an attachment while sending the notification mail to the user.
Currently we have tried the approach wherein we are specifying the user id in the OPTIONS tab (Notifying the following people) while submitting the concurrent program.
But using this approach, the user gets only the URL of the output file in the notification mail and not the output file as an attachment.
Kindly let us know if anyone has incorporated the logic to send the output file as attachment in the notification mail.
Please Note - We do not want any custom code to be written to send the attachment.
Any pointers to this will be helpful.
Regards,
Shruti

How to populate a table by sending a csv attachment to a particular mail id

Hi Experts,
I have to populate a table in the database by sending a csv attachment to a particular mail id.
Eg:
I have a table , test
with fields: name, designation, address
and i am sending a csv attachemnt with the values , name, designation, address to a generic email id say : [email protected]
my table -test should be populated automatically with the values from the attached csv.
Any idea how this can be achieved ?
Regards,
Archana

Hi,
Why cant you try uploading the data in your csv file to your table by using external table concepts? This would help you much i beleive.
CREATE TABLE "EXT_EMP_TEST"
   (     "EMPNO" NUMBER,
     "EMPNAME" VARCHAR2(20 BYTE),
     "JOB" VARCHAR2(20 BYTE)
   ORGANIZATION EXTERNAL
    ( TYPE ORACLE_LOADER
      DEFAULT DIRECTORY "DUMP_DIR"
      ACCESS PARAMETERS
      ( RECORDS DELIMITED BY NEWLINE
           BADFILE 'emp.bad'
                      LOGFILE 't.log_xt'
                      FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY ' " ' LDRTRIM
                      REJECT ROWS WITH ALL NULL FIELDS
          "EMPNO",
          "EMPNAME",
          "JOB"
      LOCATION
       ( 'emp_det.dat'
   REJECT LIMIT UNLIMITED;
{code}
In the above code, default directory is the place where the file resides in your server. So before creating an external table you need to follow the below steps,
1. Create a default directory.
2. Place your file into that directory.
3. Create an external table using the above script.
4. Just execute the simple select statement upon that external table, {code} select * from EXT_EMP_TEST {code}
*NOTE: In the above exaple i have used .dat file to load the data, you need to specify .csv over there*
Regards,
Sakthi.

Sending mail with attachment fails on MAC Mail and WRP400.

Sending mail with attachment fails on MAC Mail and WRP400.
We have hundreds of WRP400 connected with Mac (Machintosh) computers. No special configurations are applied (no virtual server or DMZ). Web navigation, P2P programs and sending mail without attachment work right.
The problem is the impossibility to send mails with medium or big size files attachment from MAC Mail.
If we use Windows PCs or a different linksys routers (eg. WRT54G) the problem not happens.
We have upgraded WRP400 firmware version from 1.00.06 to 2.00.05 but the result is the same. Sending mail with attachment using Mac fails.
We tried to configure WRP400 with DMZ to a particular MAC. We tried to configure Virtual server on tcp 25 port of a MAC. The result is always the same.
This is a WRP400 bug? Windows PCs work right. MAC and MAC mail works right with other linksys router.
We need help. Thanks.

The problem was fixed since beta firmware 2.00.11.
I think that this issue was caused from a bug that decrease upload bitrate of WRP400 after some days of activity.
See more details on Cisco forum under title "WRP400 stops responding after browsing certain websites".
Thanks.

How to send multiple attachment s with a mail??

Hi,
How to send multiple attachments with a mail??
Situation::
In my case i have 5 internal tables populated dynamically in the report.
I want to send them in .TXT format as attachment with 1 mail.
Can anybody tell me in 'SO_NEW_DOCUMENT_ATT_SEND_API1',
how we add multiple attachmants to table objin???
thanks,
deepak

Hi Deepak,
Please find the sample code for sending mail with multiple attachment.
Report ZPAN_02M                                        *
REPORT zpan_02m                                .
*-MAIN DECLARATION----
DATA: docdata    LIKE sodocchgi1,
      objpack    LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
      objhead    LIKE solisti1   OCCURS 1 WITH HEADER LINE,
      objtxt     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objbin     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objhex     LIKE solix      OCCURS 10 WITH HEADER LINE,
      reclist    LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
*-OTHER DECLARATIONS----
DATA : listobject   LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA : tab_lines(3) TYPE n.
DATA : att_type     LIKE soodk-objtp.
*OBJBIN = ' | '. APPEND OBJBIN.
*---For simple attachment -
DATA : BEGIN OF wi_data OCCURS 0,
         c1(10),
         c2(10),
       END OF wi_data.
wi_data-c1 = 'Line 1'.   wi_data-c2 = 'Line 1'. APPEND wi_data.
wi_data-c1 = 'Line 2'.   wi_data-c2 = 'Line 2'. APPEND wi_data.
wi_data-c1 = 'Line 3'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 4'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 5'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 6'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 7'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 8'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 9'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 10'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 11'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 12'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 13'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 14'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 15'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 16'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 17'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 18'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 19'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 20'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 21'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 22'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 23'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 24'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 25'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 26'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
class cl_abap_char_utilities definition load.
constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF,
    con_nwln type c value cl_abap_char_utilities=>NEWLINE.
LOOP AT wi_data.
CONCATENATE wi_data-c1 con_tab
              wi_data-c2
            INTO objbin.
condense objbin.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
ENDLOOP.
*---CREATE MESSAGE : DOCDATA -
Name
docdata-obj_name = 'TEST_ALI'.
Subject
docdata-obj_descr = 'Test including ALI/HTML Attachment'.
*---CREATE MESSAGE : BODY -
objtxt = 'Test Document.'.
APPEND objtxt.
objtxt = 'You will find an ALI/HTML attachment in this message.'.
APPEND objtxt.
objtxt = 'Have a nice day.'.
APPEND objtxt.
*-CREATE PACKING LIST-----TEXT--
objpack-head_start = 1.
DESCRIBE TABLE objtxt LINES tab_lines.
READ     TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'RAW'.
APPEND objpack.
*-CREATE PACKING LIST-----ATTACHMENT--
att_type = 'XLS'.
DESCRIBE TABLE objbin LINES tab_lines.
READ     TABLE objbin INDEX tab_lines.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 1'.
objpack-obj_descr = 'Attached Document 1'.
APPEND objpack.
att_type = 'XLS'.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 14.
objpack-head_num   = 14.
objpack-body_start = 14.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 2'.
objpack-obj_descr = 'Attached Document 2'.
APPEND objpack.
*-CREATE RECEIVER LIST----
reclist-receiver = '[email protected]'. reclist-rec_type = 'U'.
APPEND reclist.
reclist-receiver = sy-uname.               reclist-rec_type = 'B'.
APPEND reclist.
*-SEND MESSAGE----
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data                     = docdata
    put_in_outbox                     = 'X'
    commit_work                       = 'X'
IMPORTING
SENT_TO_ALL                       =
NEW_OBJECT_ID                     =
TABLES
    packing_list                      = objpack
    object_header                     = objhead
    contents_bin                      = objbin
    contents_txt                      = objtxt
CONTENTS_HEX                      = objhex
OBJECT_PARA                       =
OBJECT_PARB                       =
    receivers                         = reclist
   EXCEPTIONS
     too_many_receivers               = 1
     document_not_sent                = 2
     document_type_not_exist          = 3
     operation_no_authorization       = 4
     parameter_error                  = 5
     x_error                          = 6
     enqueue_error                    = 7
     OTHERS                           = 8.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
              WITH output = 'X'
              AND RETURN.
Hope this is enough for you...
Enjoy SAP.
Pankaj Singh.

How to send JPG images in MAIL?

I'm having a problem in sending JPG files in MAIL. Nobody can open de files i send. Need Help.
Tanks.

Makes sure extensions are fully apparent, checks the form of preview that may have been created on the Mac for its use. Two support documents are linked below, and the one for earlier version of Mail is still useful:
http://docs.info.apple.com/article.html?path=Mail/4.0/en/9965.html
and
http://docs.info.apple.com/article.html?path=Mail/3.0/en/9965.html
If you were sending to someone using a really old version Mac OS, it might be a hinderance, btw.
The issues that can arise from use of Rich Text Format are separate issues, and relate to MS and AOL not processing RTF from other systems.
Ernie
Message was edited by: Ernie Stamper

Send attachment (jpg) in scenario Mail to Mail

Similar Messages

Maybe you are looking for