Send customer documents to different application

Hello all,
We have a need to send customer invoices to an external applocation via IDOCs. We need to send an invoice as soon as it is generated and also when a payment is recieved against a customer invoice for a particulat customer group. We genrate customer invoices through batch program. any idea how this can be done. I've ABAP experience but no IDOC experience whatsover. I would greatly appreciate if you can tell me how can this be acheived and what are the steps that are involved. Any pointers to online documentation will also be much appreciated.
Thanking you all in anticipation.
Regards,
Rajani

Hi All,
I was successfully able to send IDOCs to another system, but I would like to filter the IDOCs based on G/L account. Can anyone ple..............ase tell me how to create filter objects. We are on ECC6.
Prompt responses will be greatly appreciated.
Thanking you in anticipation.
Regards,
Rajani

Similar Messages

Sending a message to different application server

Hi all
I have a session bean that send message to a message driven bean in the same application server.
I wonder how to send the same message to a message driven bean in a different application server.
Is Context.PROVIDER_URL (jndi hard coding) important for that matter?

anyway if i do not want use jndi.properties file it's enough specifing the Context.PROVIDER_URL pointing to the new jboss server???
// hard coding configurazione jndi
          Properties properties = new Properties();
          properties.put(Context.INITIAL_CONTEXT_FACTORY,
          "org.jnp.interfaces.NamingContextFactory");
          properties.put(Context.URL_PKG_PREFIXES, "org.jnp.interfaces");
          properties.put(Context.PROVIDER_URL,
          "xxxxxxx");
          try {
               initialContext = new InitialContext(properties);
          } catch (Throwable ex) {
               throw new ExceptionInInitializerError(ex);
          }

Send Customer Payment document to external application.

Dear All,
I am working on one of our customer requirement to send Customer Payment data from SAP ECC 6.0 to their application using SAP PI 7.0
I have created a customer Invoice (in Transaction Code FB70) without any reference document .
Now I want to generate a Customer payment document on the top of Customer Invoice generated as mentioned above.
Can any one please suggest the following:
1) Can we generate Customer payment document in transaction FII0
2) What are the mandatory parameters to generate Customer payment document.
3) If I need to send this data to external application using IDOCs , so can i use Program RFFOEDI1 as suggested in other threads.
what are the parameters needs to given to run the program?
4) How to configure the our output type so whenever we generate a Customer payment document, an IDOC should be genarated.
Also please confirm if I can use IDOC PAYEXT with basic type PEXR2001 or should I go for some other IDOC.
Best Regards
Honey
Edited by: Honey Gyanani on Jun 29, 2009 7:19 AM

I have posted the same Question in ERP Financials and got the answer.
Honey...

"An error occurred sending the command to the application" When trying to open excel document from outlook 2007

Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

Apple does not offer custom colors. I'd suggest you get a skin for your iPod. Those are available in hundreds of colors and patterns and since they're not permanent, they don't affect the iPod's warranty and you can change if you ever get tired of the skin you chose.
Regards.

Since upgrading to 4.0 I've been receiving irritating messages every time I click through via a link embedded in a document or an email. The message says "An error occurred in sending the command to the application". How can I remove it?

Since upgrading to Firefox 4.0 I've been receiving irritating messages every time I click through via a link embedded in a document or an email. The message says "An error occurred in sending the command to the application". How can I remove it?

Certainly!
This is the module in our eMac 1.42:
1GB PC2700 DDR 333MHz CAS 2.5 184 Pin DIMM
The vendor, Other World Computing, ships to the UK but I suspect the shipping would make it pricy. I also trust this vendor:
Apple G4 eMac 1.42GHz (184 Pin PC2700 DDR DIMMs)
Between the two vendor's description, you should have a good idea of the Specs
PPC Macs do not like hi-density PC RAM. That's why I linked these two; they send the right stuff to Mac users.
Crucial UK is usually cited as good but, like their US counterpart, seldom go against Apple's outdated specs. See:
http://www.crucial.com/uk/store/listparts.aspx?model=eMac%20(1.42GHz)&Cat=RAM
They show the max RAM for your model as 1GB--yesterday's news. However, if you order their offering for a G5 iMac, you get the larger modules. Here is a listing for a 2GB kit (2 x 1GB modules) of the right config:
http://www.crucial.com/uk/store/listparts.aspx?model=iMac%20(G5-1.8GHz%2C%2020-i nch)&Cat=RAM
Hope this didn't muddy the water!
Allan

How to Customie Document Manager Service with a custom Java Application

Hi,
We have a requirement where we want to send customized emails to a group administrator whenever any document is uploaded using the Document Manager servie in Webcenter. For that we have written a java component for sending mails.
Could anyone tell me how do we make this java component work with the Document Manager upload action. how to modify it?
Any pointers would be appreciated.
Regards,
USha

The FieldPoint Ethernet modules (as well as LabVIEW - DSC and Lookout) utilize a propietary National Instruments Ethernet protocol. The protocol is not published and is currently restricted to Windows based platforms. There are several interfaces that allow one to communicate using the proprietary protocol; including NI FieldPoint (which has interfaces for LabVIEW, OPC, LabWindows/CVI), Lookout, LabVIEW - DSC, DataSocket, and (I think) a ComponentWorks module). Even though several of these interfaces are multiplatform, the ethernet support will only work on Windows based platforms.
Whereas the FieldPoint ethernet protocol is proprietary and closed, the protocol for the serial modules is open and published in the FP-1000/1001 Programmers Reference Manual. You can build your own multi-platform solution that way. Alternatively, you can use the FP-20XX series of RT Controllers and embed a LabVIEW RT program that publishes the channel data in your own format that you can write a non-platform specific interface to.
Regards,
Aaron

Custom Document & Custom Doc Legal Control Extraction into SAP BI

Dear All,
After all the business content for GTS was activated in GTS and SAP BI, the following configuration steps were taken in GTS to extract this data into BI for
reporting:
[1] Integration with Other mySAP.com Components > Data Transfer to the SAP Business Information Warehouse > General Settings > Maintain Control Parameters for Data Transfer [Used ECC as guide]
[2] Global Trade Services > General Settings > Organizational Structure > Control Settings at FTO Level for SAP NW Business Intelligence (BI)
Inserted new records missing when comparing to Assgmt of Feeder System Grouping Org.Units to LLS Org.Units table [/SAPSLL/TCOOGS]
Turned on BI Active flag for all records
[3] Global Trade Services > General Settings > Document Structure > Define Document Types for Application Areas
For each document type in all the folders, turned on ‘transfer to SAP Netweaver Business Intelligence Active’ flag where it was available to be turned on.
[4] Global Trade Services > General Settings > Document Structure > Define Item Categories for Application Areas
For each item category in all the folders, turned on ‘transfer to SAP Netweaver Business Intelligence Active’ flag where it was available to be turned on.
Focusing on custom document and custom document legal control extractors, the data comes from /SAPSLL/CUIT which contains 113K records in development, however, the amount of data extracted into BI is minimal. So I have a few questions:
Did I miss any additional configuration swithces to extract into BI?
SAP Documentation: You have entered a unit of weight in the table for GTS: Control Settings at Foreign Trade Organization Level. This unit of weight must be the common unit of weight that you want to be used in strategic reporting in BI . The values in the fields for gross weight (WEIGR), net weight (WEINE) and unit of weight (WEIDI)
depend on the unit of weight you maintain at FTO level in the IMG for converting weights for SAP BIDoes each FTO need to be insert with different unit of measure? ie FTO123 UoM = EA; FTO123 UoM = CS; FTO123 UoM = KG
Should all the data records from /SAPSLL/CUIT be extracted into Custom Document DSO [0SLL_DS01]? If no, why? If yes, refer to pt 1 and what am I missing?
SAP Documentation: Only data that belongs to the legal controls for the following legal regulations is transferred to BI:
German Foreign Trade Laws
Prohibitions and Restrictions
Other What is the significance of these legal controls that SAP has decided to only transfer this type into BI? If the client want additional legal controls, would it be possible to extract them into BI?
If anyone is currently using the std content for BI reporting, any assistance with my questions would be appreciated.
Sincerely,
Claire

Hi Claire,
Your customizing looks correct. But the amount of data extracted depends on your condition you have defined during extraction(e.g. Creation Date)
Also in the coding only /SAPSLL/CUIT~ITSTA = space (Standard Item) and A (Item is allocated) is considered in 0SLL_CD_1.
You could find out reason by debugging to find out exact reason.
T-code: RSA2 , Enter Data source : 0SLL_CD_1. Then click display.
Click Extract check ( Shift + F8 ) and put break point in coding FM : /SAPSLL/BW_GET_CD_1
Best regards,
Vincent

Content Server & cFolder Integration via Different Application

Hello,
We have cFolder 3.1 and content server. cFolder and Content Server is integrated. User can add file via cFolder & this file will be visible in cFolder.
But Customer has a different requirement.
They want to upload files to content Server Directly(ie not thru cFolders) using a web dynpro application, after uploading, a Document Link needs to be created in cFolder linking to Content Server. (Please note that this has to be document link and not a Bookmark/Hyper Link ). So that customier will still be able to use his API for reading the file content.
Can you plrease suggest the way forward?
Regards
Geogy

Hi Geogy,
I think you can try the following way for this:
You need to be able to call the API CFX_API_DOC_CREATE, while uploading the document in the webdynpro application. While creating the document, you can provide the URl instead of original file path and save it.
thanks,
rajesh.

Can BPM maintain flow across different applications

Hello,
I have a requirement where I have to maintain the business flow across different applications(Siebel CRM, Oracle Financials and third party applications) with out the end user knowing.
Is it possible with BPM to navigate users from one application to another application (CRM Application-> Third party Application -> Financials)? If there is a solution availabe with BPM or a different application please provide the same doc. Appreciate your help.
Regards,
Jay

Hi,
Yes. Oracle BPM can maintain a flow across multiple applications without the end user knowing. It is something it was built to do.
First, applications like the ones you mentioned have an API (typically web service today but older applications exposed their API as Java POJOs, EJBs, COM, etc.). For Oracle BPM to access the applications, you need to expose the API in Oracle BPM's catalog. Customers that have a service bus expose the application APIs in the service bus and then Oracle BPM catalogs the service bus proxy services. Customers that do not have a service bus can expose the application APIs directly in Oracle BPM's catalog. Either way will work.
Second, you'd design a process with a series of Interactive (human activities) and Automatic (activities that invoke the components that in turn invoke the APIs for your applications without human intervention). You'd add something called instance variables that carry the information throughout the life the process for each work item instance. Interactive activities are placed into roles with a name associated with them (e.g. CSR or Manager) so the work done in each activity is done by the right type of person. Interactive activities can be set up where the work item instance goes to a specific person instead of everyone in the role where the activity is located (e.g. send the instance to the CSR that talked to the customer last time).
Third, at runtime as each work item instance is created (e.g. "Order 227") in the process the work item instance flows to one of the process's Interactive or Automatic activities. If it flows into an Interactive (human) activity, the end user assigned to the role where the activity is located clicks on an item in their web based Oracle BPM WorkSpace's inbox for the specific work item instance that they are interested in working on (again - perhaps "Order 227"). Once clicked by the end user, a UI presentation (either built using Oracle BPM's WYSIWYG presentation editor or a JSP) shows the work that needs to be done specifically by that end user. The UI presentation is already populated with the information gathered from a database or a previous API call from an Automatic activity. All this is done without end users having to cut out of one application and then paste into another application's screen - the right contextual information is sent to the right person at the right time. Once the end user finishes their manual task, the work might flow to an Automatic task that invokes another applicaiton's API automatically from the logic and variable information gathered in earlier activities in the process.
All this is done without the end users knowing that they are flowing through multiple applications to get their work done.
Hope this helps,
Dan

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.

Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

Unable to display customs document in SAP GTS

Hello,
I am using SAP GTS 7.2 Compliance services. SPL and Embargo services are working well (I am not using License determination).
Indeed, when I save a sales order in ERP, it is effectively checked for compliance, as I receive a message when it is blocked by GTS..
In GTS, I can check that concerning business partners are effectively blocked, using:
"Display Blocked Business Partners" and "Display Business Partners with Embargo Situation".
But I cannot display any customs document in SAP GTS, using transaction /SAPSLL/CUHD_DISPLAY (Display all documents) or SAPSLL/CON_BLOCKED_DOCS_EXP (Display blocked documents).
I get the following error message "No data was found for the selection criteria specified".
As I understood, SAP GTS performs the compliance checks not on ERP documents but on corresponding GTS customs document. Thus I guess they are effectively created somewhere! If it was not the case, I guess the process should not work.
When I look in the audit trail of SPL for documents, I can see all the SPL checks that have been performed. Looking in the corresponding table "/SAPSLL/SPLAUD", I can even find the numbers of the different customs documents...
But there is nothing in table "/SAPSLL/CUHD", where they should be copied... The only entries I found concern biling documents that were transferred for customs purposes...
Could you please help me on this matter?
Many thanks,

Hi Sameer,
Thank you for your fast answer. I checked in the debug mode creating a breakpoint at statement RFC and it effectively stops at RFC /SAPSLL/API_6800_SYNCH.
But when I check the log in transaction SLG1, nothing appears concerning /SAPSLL/API_6800_SYNCH.
I think the customs document is effectively created in GTS as I can see it has a number assigned in the audit trail for SPL screening. And compliance services work.
Though when going through the transaction of displaying all documents in GTS there is nothing. Table "/SAPSLL/CUHD" is empty (except some billing documents that were transferred for customs purposes).
This is really weird... Anyway, thank you for your help.
Kind Regards,

B2B - Error While sending the document to GXS from Oracle B2B server.

When I am trying to send the document to GXS, getting the following error. This message is show in the window that pops up when you click on Reports->WireMessage->Details of the Message.
I am trying to find what is causing the issue.
State ERROR
Error Code B2B-50079
Error Description Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :sun.security.validator.ValidatorException: No trusted certificate found.
Error Text Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :sun.security.validator.ValidatorException: No trusted certificate found.
Here is the complete details from the Window.
Id 812E875712EA19A8EEC000005EF51ED3
Message Id 4e45f5dff566a29f:-ce624b0:12ea1982d56:-7ff3
Business Message 812E875712EA19A8E88000005EF51ED0
Packed Message Packed Message
Payload Payload
Protocol Message Id 4e45f5dff566a29f:-ce624b0:12ea1982d56:-7ff3
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding TO=Trader_Joes content-type=application/HTTPstream,actionrequest Content-Transfer-Encoding=binary FROM=AcmeSystems MESSAGE-ID=4e45f5dff566a29f:-ce624b0:12ea1982d56:-7ff3 DATE=Thu, 10 Mar 2011 21:09:43 GMT Connection=close Content-Type=text/plain; charset=us-ascii
Message Digest Message Digest
Digest Algorithm
Transport Protocol HTTP
Transport Protocol Version 1.1
Url https://web.tradinggrid.gxs.com/invoke/gxs.https/receive
security
Transport Headers TO=Trader_Joes content-type=application/HTTPstream,actionrequest Content-Transfer-Encoding=binary FROM=AcmeSystems MESSAGE-ID=4e45f5dff566a29f:-ce624b0:12ea1982d56:-7ff3 DATE=Thu, 10 Mar 2011 21:09:43 GMT Connection=close Content-Type=text/plain; charset=us-ascii
certificates certificates
State ERROR
Error Code B2B-50079
Error Description Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :sun.security.validator.ValidatorException: No trusted certificate found.
Error Text Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :sun.security.validator.ValidatorException: No trusted certificate found.
exchangeRetryInterval
exchangeRemainingRetry
Message Size 0
Here is the Setup We did sofar.
1) Created the Document Definition.
     PositionalFlatFile-VDA-1998-4913v4-4913v4_Definition
2) Created Trading Partner Profile
     Trader_Joes
3) Added Document Definition to the TP as receiver.
4) Configured a channel with Protocol "Generic HTTP-1.0". Is it showing only one entry, HTTP.
     Transport Protocol: Selected "HTTP" from the dropdown list.
     url: https://web.tradinggrid.gxs.com/invoke/gxs.https/receive
     username: xxxx
     password: xxxx
     Additional transport headers: content-type=application/HTTPstream,actionrequest=upload,receiverid=xxxxxxx,datatype=EDI,aprf=TEST,snrf=12345678
NOTE: I don't see tabs for "Exchange Protocol Parameters" and "Security". It only shows "Transport Protocol Parameters" and "Channel Attributes" tabs.
=====
5) Created Agreement with the document defition that was created.
6) Deployed the Agreement and it is showing "Active" state.
7) Created a Keystore on the server using the following command.
keytool -genkeypair -alias serverCert -keyalg RSA -keysize 1024 -validity 365 -dname "CN=soa.Acmesystems.com,OU=Support,O=Acmesystems,L=suntown,ST=MD,C=US" -keypass xxxxxxxxxx -keystore AcmeIdentity.jks -storepass xxxxxxxxxx
keytool -list -keystore AcmeIdentity.jks -storepass xxxxxxxxxx
8) Imported the certificate that we got from the GXS to the Key store using the following command.
keytool -importcert -v -noprompt -trustcacerts -alias ws-tradinggrid -file ws-tradinggrid.cer -keystore AcmeIdentity.jks -storepass xxxxxxxxxx
keytool -list -keystore AcmeIdentity.jks -storepass xxxxxxxxxx
9) After that When I run my composite bpel program to send B2B message, I am getting the above error.
Where is the issue?
Any help is appreciated.
Thank you
Krishna

We loaded the certificate chain into key store and that part is working now.
We are getting now the following error. Any Idea?
[2011-03-14T09:12:47.787-07:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.mediator.serviceEngine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@5fddbbc0] [userId: <anonymous>] [ecid: 0000Iup92C3CcpiF_7I7S61DUNHj000lw2,0] [APP: soa-infra] [composite_name: TestBusinessEventShipconfirmed] [component_name: TestBusinessEventMediator] [component_instance_id: E71EFFB04E5511E0BF70B592E6C64FAC] [dcid: 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ffd-0000000000000012] [composite_instance_id: 50004] MediatorServiceEngine received a request for operation = Read
[2011-03-14T09:12:47.996-07:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.mediator.serviceEngine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@5fddbbc0] [userId: <anonymous>] [ecid: 0000Iup92C3CcpiF_7I7S61DUNHj000lw2,0] [APP: soa-infra] [composite_name: TestBusinessEventShipconfirmed] [component_name: TestBusinessEventMediator] [component_instance_id: E71EFFB04E5511E0BF70B592E6C64FAC] [dcid: 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ffd-0000000000000012] [composite_instance_id: 50004] MediatorServiceEngine returning after processing the request for operation = Read
[2011-03-14T09:12:49.384-07:00] [soa_server1] [WARNING] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@c0ad9a3] [userId: <anonymous>] [ecid: 0000Iup92ObCcpiF_7I7S61DUNHj000lw3,0] [APP: soa-infra] [dcid: 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ffd-0000000000000021] [[
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-403
StackTrace oracle.tip.b2b.transport.TransportException: [IPT_HttpSendError] HTTP encounters send error :403
com.wm.app.tn.err.EXMLException: <EXMLException>
<ErrorCode>0003.4089</ErrorCode>
<Info>Could not get internal ID for partner (id=null, typeCode=null, typeDesc=ICS Mailbox ID).</Info>
<OriginalException>
<JavaClass>com.wm.app.b2b.server.ServiceException</JavaClass>
<Message>"extID" is required.</Message>
<StackTrace>com.wm.app.b2b.server.ServiceException: "extID" is required.
     at wm.tn.profileimpl.getInternalID(profileimpl.java:2577)
     at sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:403)
     at com.wm.app.b2b.server.invoke.InvokeManager.process(InvokeManager.java:631)
     at com.wm.app.b2b.server.util.tspace.ReservationProcessor.process(ReservationProcessor.java:40)
     at com.wm.app.b2b.server.invoke.StatisticsProcessor.process(StatisticsProcessor.java:44)
     at com.wm.app.b2b.server.invoke.ServiceCompletionImpl.process(ServiceCompletionImpl.java:241)
     at com.wm.app.b2b.server.invoke.ValidateProcessor.process(ValidateProcessor.java:51)
     at com.wm.app.b2b.server.ACLManager.process(ACLManager.java:228)
     at com.wm.app.b2b.server.invoke.DispatchProcessor.process(DispatchProcessor.java:30)
     at com.wm.app.b2b.server.AuditLogManager.process(AuditLogManager.java:628)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:536)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:381)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:237)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:189)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:324)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:581)
     at com.wm.lang.flow.FlowState.step(FlowState.java:441)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:406)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1040)
     at com.wm.app.b2b.server.invoke.InvokeManager.process(InvokeManager.java:631)
     at com.wm.app.b2b.server.util.tspace.ReservationProcessor.process(ReservationProcessor.java:40)
     at com.wm.app.b2b.server.invoke.StatisticsProcessor.process(StatisticsProcessor.java:44)
     at com.wm.app.b2b.server.invoke.ServiceCompletionImpl.process(ServiceCompletionImpl.java:241)
     at com.wm.app.b2b.server.invoke.ValidateProcessor.process(ValidateProcessor.java:51)
     at com.wm.app.b2b.server.ACLManager.process(ACLManager.java:228)
     at com.wm.app.b2b.server.invoke.DispatchProcessor.process(DispatchProcessor.java:30)
     at com.wm.app.b2b.server.AuditLogManager.process(AuditLogManager.java:628)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:536)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:381)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:237)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:189)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:324)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:581)
     at com.wm.lang.flow.FlowState.step(FlowState.java:441)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:406)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1040)
     at com.wm.app.b2b.server.invoke.InvokeManager.process(InvokeManager.java:631)
     at com.wm.app.b2b.server.util.tspace.ReservationProcessor.process(ReservationProcessor.java:40)
     at com.wm.app.b2b.server.invoke.StatisticsProcessor.process(StatisticsProcessor.java:44)
     at com.wm.app.b2b.server.invoke.ServiceCompletionImpl.process(ServiceCompletionImpl.java:241)
     at com.wm.app.b2b.server.invoke.ValidateProcessor.process(ValidateProcessor.java:51)
     at com.wm.app.b2b.server.ACLManager.process(ACLManager.java:228)
     at com.wm.app.b2b.server.invoke.DispatchProcessor.process(DispatchProcessor.java:30)
     at com.wm.app.b2b.server.AuditLogManager.process(AuditLogManager.java:628)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:536)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:381)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:237)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:119)
     at com.wm.app.b2b.server.HTTPInvokeHandler._process(HTTPInvokeHandler.java:141)
     at com.wm.app.b2b.server.InvokeHandler.process(InvokeHandler.java:110)
     at com.wm.app.b2b.server.HTTPDispatch.handleRequest(HTTPDispatch.java:185)
     at com.wm.app.b2b.server.Dispatch.run(Dispatch.java:333)
     at com.wm.util.pool.PooledThread.run(PooledThread.java:118)
     at java.lang.Thread.run(Thread.java:595)
</StackTrace>
</OriginalException>
<Action></Action>
<Level></Level>
</EXMLException>.
     at oracle.tip.b2b.transport.TransportException.create(TransportException.java:94)
     at oracle.tip.b2b.transport.basic.HTTPSender.createTransportResponse(HTTPSender.java:683)
     at oracle.tip.b2b.transport.basic.HTTPSender.send(HTTPSender.java:498)
     at oracle.tip.b2b.transport.b2b.B2BTransport.send(B2BTransport.java:317)
     at oracle.tip.b2b.transport.TransportInterface.send(TransportInterface.java:1492)
     at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1551)
     at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:837)
     at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1411)
     at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
     at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
     at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
[2011-03-14T09:12:49.390-07:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@c0ad9a3] [userId: <anonymous>] [ecid: 0000Iup92ObCcpiF_7I7S61DUNHj000lw3,0] [APP: soa-infra] [dcid: 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ffd-0000000000000021] Request: outgoingRequestPostColab: Request Message Transmission failed
[2011-03-14T09:12:49.431-07:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@c0ad9a3] [userId: <anonymous>] [ecid: 0000Iup92ObCcpiF_7I7S61DUNHj000lw3,0] [APP: soa-infra] [dcid: 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ffd-0000000000000021] Engine: processOutgoingMessageImpl: Message id = 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ff0 ToParty = Trader_Joes Doctype = 4913v4 version = VDA-1998

How to print custom documents through custom program

Hi,
I am printing custom documents like Commercial Invoice, Shipper's Letter of Instructions, Shipper's Export Declaration , using communication tab of custom declarations. SInce user wanted output with a changed layout( different from standard), so new Activity messages ( like ZP100 in place of standard P100) are created to call Z forms ( new PDF from created using SFP and called for this Message type). This part is done our fucntional team. This customize message type is calling my custom Z forms. But all these Z forms are not allowing printing of the document from Preview of PDF. Print Icon become disabled in the preview. Used wants to print from preview of PDF itself.
There is a parameter in BADI DOC_PERSONALIZE_BCS method parameter 'NOPRINT', which is passed with value 'X' in the function module to create PDF. SInce this is set to 'X' it is not letting us print from preview.
So, can anyone help me in finding what can I do to get this print enabled from preview. If I need to change this method, then what are the steps and how standard configurations will be changed to call Zprogram in place of standard.

Hi Swati,
The Badi you mentioned should help you, try changing the importing parameter in your local structure and pass this local variable, instead of the imported (IS_outputparams-noprint = 'X' ) to the function below. This is an example, you`ll need to declare data as well :
Method IF_EX_DOC_PERSONALIZE_BCS~PERSONALIZE_PDF_DOC_PDFIF
ls_output_options = is_outputparams.
IF NOT ls_output_options-preview IS INITIAL.
    ls_output_options-noprint = ' ' .    " Allow printing
   ENDIF.
call function '/SAPSLL/PRN_FORM_PROCESS_PDF'
    exporting
      iv_guid_cuhd       = lv_guid_cuhd
      iv_function_name   = ip_function_name
      iv_form_name       = ip_form_name
      iv_appl_log_handle = ip_application_log
      is_output_options = ls_outputparams " put your LOCAL structure here ....
    importing
      es_formoutput      = es_formoutput
      es_joboutput       = es_joboutput
    changing
      cs_docparams       = cs_docparams
    exceptions
      output_canceled    = 1
      others             = 2.
Hope this helps,
Regards,
Branislav Petricek

B2B Custom Document Type not getting identified

Hello,
I have installed Oracle Fusion Middleware 11g on my local machine and created a custom document type with proper .xsd definition and XPath Expression Identifier in Oracle B2B interface and configured its trading partners ( Host & Remote ) along with an agreement between the partners.
I have also configured the host listening channel of Generic-File type which picks xml files from my c:\orclsrvs_in folder.
My problem is that the moment I drop any sample file in the expected directory, it gets picked up from B2B , but there isn't any record of the same under Reports and Metrics links.
The Business message, Application message and Conversation message tabs are also not showing any information about the record picked, but in wire message tab, the record is shown in PROCESSING state.
I am not able to conclude whats wrong behind this.. where can i track the logs for the same ??
kindly help to resolve this issue.
Thanks & Regards
Hiteshkumar Chaudhary

Hi Hitesh,
i came to know that B2B extracts the TP name from the filename itselfYes, in case of Generic File, Generic SFTP and Generic FTP, file name provides the necessary values to Oracle B2B to identify the Trading Partner. You can define your own file name format in the Delivery Channel under Transport Protocol Parameters in field "Filename format" (It's an optional field but it is always good to define your own format, otherwise B2B will take it's default format - TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml ). Following Filename formats can be used -
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
These file name formats can be used in any combination; for example,
%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
Note - Any file extension is allowed.
what are the system parameters to be set in weblogic console and how?? This activity is part of the pre and post installation steps. If you have done those without getting any errors then nothing else is required.
how shall I reinstall XEngine properly ??XEngine is part of B2B installation. If B2B gets installed without flashing any errors then we assume that other components of this part has installed properly.
Regards,
Anuj
Edited by: Anuj Dwivedi, Infosys on Aug 28, 2009 5:51 PM

Send customer documents to different application

Similar Messages

Maybe you are looking for