Custom Document & Custom Doc Legal Control Extraction into SAP BI

Dear All,
After all the business content for GTS was activated in GTS and SAP BI, the following configuration steps were taken in GTS to extract this data into BI for
reporting:
[1] Integration with Other mySAP.com Components > Data Transfer to the SAP Business Information Warehouse > General Settings > Maintain Control Parameters for Data Transfer [Used ECC as guide]
[2] Global Trade Services > General Settings > Organizational Structure > Control Settings at FTO Level for SAP NW Business Intelligence (BI) 
Inserted new records missing when comparing to Assgmt of Feeder System Grouping Org.Units to LLS Org.Units table [/SAPSLL/TCOOGS]
Turned on BI Active flag for all records  
[3] Global Trade Services > General Settings > Document Structure > Define Document Types for Application Areas
For each document type in all the folders, turned on ‘transfer to SAP Netweaver Business Intelligence Active’ flag where it was available to be turned on.
[4] Global Trade Services > General Settings > Document Structure > Define Item Categories for Application Areas
For  each item category in all the folders, turned on ‘transfer to SAP  Netweaver Business Intelligence Active’ flag where it was available to be turned on.
Focusing on custom document and custom document legal control extractors, the data comes from /SAPSLL/CUIT which contains 113K records in development, however, the amount of data extracted into BI is minimal.  So I have a few questions:
Did I miss any additional configuration swithces to extract into BI?
SAP Documentation: You have entered a unit of weight in the table for GTS: Control Settings at Foreign Trade Organization Level. This unit of weight must be the common unit of weight that you want to be used in strategic reporting in BI . The values in the fields for gross weight (WEIGR), net weight (WEINE) and unit of weight (WEIDI)
depend on the unit of weight you maintain at FTO level in the IMG for converting weights for SAP BIDoes each FTO need to be insert with different unit of measure?  ie FTO123 UoM = EA; FTO123 UoM = CS; FTO123 UoM = KG
Should all the data records from /SAPSLL/CUIT be extracted into Custom Document DSO [0SLL_DS01]? If no, why? If yes, refer to pt 1 and what am I missing?
SAP Documentation: Only data that belongs to the legal controls for the following legal regulations is transferred to BI:
German Foreign Trade Laws
Prohibitions and Restrictions
Other What is the significance of these legal controls that SAP has decided to only transfer this type into BI? If the client want additional legal controls, would it be possible to extract them into BI?
If anyone is currently using the std content for BI reporting, any assistance with my questions would be appreciated.
Sincerely,
Claire

Hi Claire,
Your customizing looks correct. But the amount of data extracted depends on your condition you have defined during extraction(e.g. Creation Date)
Also in the coding only /SAPSLL/CUIT~ITSTA = space (Standard Item) and A (Item is allocated) is considered in 0SLL_CD_1.
You could find out reason by debugging to find out exact reason.
T-code: RSA2 , Enter Data source : 0SLL_CD_1. Then click display.
Click Extract check ( Shift + F8 ) and put break point in coding FM : /SAPSLL/BW_GET_CD_1
Best regards,
Vincent

Similar Messages

  • Data extraction into sap table  from legacy oracle database

    Hello All,
        I have a scenario where I have two different software systems (SAP and xyz systems), where a intermediate table will be created in between the two systems that is shared. Data will be updated by the xyz systems into this shared table. Now, my questions regarding this shared table.
       1) Can we write some program or something to get the data from shared table to update the SAP?
       2) If possible send me the suggestions
       3) Please also send me the sample code to get the data from the shared table
    Thanks in advance,
      SDN powered

    this shared table should be compatiable to sap fields...write code to fetch data from this table and assign data to appropriate fields in SAP and insert the data into sap.
    1. Push mechanism
    Write a RFC on SAP side to insert entries into the table.
    Call the RFC from xyz application passing the data you want to insert.
    2. Pull mechanism
    Write a ABAP Program, where you can somehow read the data of the xyz application and insert data into the table.
    3. Flat file
    Dump the data from xyz application into the file.
    Write a ABAP program to read the file and update the table.

  • Migration of documents from a http content server into sap kpro und sap dvs

    hello,
    I want to migrate documents from an http 4.5 content server into the sap knowledge provider (kpro) and in sap dvs with an abap program.
    I know I have to create a PHIO and a LOIO and write it in the tables DMS_PH_CD1 and (only the LOIO) in DMS_DOC2LOIO.
    Where I have to write my url for accessing the document on the content server?In which table?
    What fm´s do I need to create the PHIO´s and LOIO´s?
    Has anyone an idea and hints (like weblinks) to integrate documents from an content server into kpro and sap dvs?

    Hello,
    the private key, where the hash is signed with is stored
    in your AppServer directory $DIR_INSTANCE/sec and is
    called SAPSYS.PSE. Where the PSE is a secude (www.secude.de) specific format which contains the private and the publik key.
    But I guess you won't get the private key, because its private, unless you are the Administror
    Then signig is done via the normal industry standards. (http://www.rsasecurity.com/)
    regards,
    mumba.

  • Regarding Oil & Gas extraction into sap bi

    Hi friends
    We are above to do extraction  from Industry specific OIL & Gas    ,  and civil projects  \
    can anyone has done this kind of project , or atleast guide me how to work on this ( as it is differenct compare to LO & COPA extraction) please help me . i tried to search the relevant objects in Business content i didnt find
    thanks in advance
    thanks

    Hi,
    please check this link:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/405f09c8-ca95-2e10-bd81-8d79bd3afa04?QuickLink=index&overridelayout=true
    hope it will give some idea.
    and congrats for the good project...!

  • SSAS Cube Results needs to be extracted into SAP BW

    Hi Experts,
    I wanted to see the possibilty of extracting SSAS cube results in SAP BW. Has anybody done this before? If so can you please share your experience and and also how the connections are done between SSAS and SAP BW?
    Any help is appreciated.

    Any replies on this one.

  • Customs documents and customs declaration.

    Hi Experts,
    Can any one please briefly explain what is the difference between customs document and customs declaration. Is there any special process required to convert customs document as customs declaration?
    I will explain by taking one scenario.
    If we transfer any documents from ecc to gts those documents will called as customs documents. Please tell me am I Right or wrong if right,
    another scenario,
    when we send proforma invoice to gts those invoice will be converted as customs declaration. Is it right or wrong if it is right how it converts to customs declaration why cann't it convert as customs document.
    for converting customs document to as customs declaration is there require any process or configuration settings if yes please let me explain i am little bit confuse.
    Thanks in advance for help ful answer.

    Hi Hari,
    You are exactly bang on in explaining about what is a Customs document and What is a Customs declaration.
    Firstly, please take a look at the below thread where this had been discussed earlier also.
    Difference between customs document and customs declaration document
    But to further differentiate in real sense,
    A Custom document is something that is record in the SAP GTS system of the trade transactions occurring in the SAP logistics system and some time may a supporting document as well. An example of such a case is when we create a sales order , then a customs document is being generated in the GTS system. Here, SAP GTS Custom Documents are just a replica of the SAP feeder system's documents like Sales order etc. with Trade specific data like licenses embedded into them to further assist for future declarations and tracking.
    A Custom Declaration is something that contains data to be declared to the appropriate authorities in the specified format.  During this process ,data from the company's SAP business documents is copied into a declaration to further pass on to the authorities for approval for trade and related processes.
    I hope that now the things will be clear to you. If not, please open a discussion thread for an open discussion to get the required stuff.
    Regards,
    Aman

  • Number of custom documents

    Hi,
    I have some custom documents (xls, doc, ...) in my application.
    Now i would add a new document, but the following error message appears:
    "Load of document failed. Unable to add custom document. Your system administrator has limited the number of custom documents to %0. You currently have %1 documents saved for this application."
    Whats wrong or where can I modify this setting??
    Thanks!
    V11.1.2.1

    Hi,
    See if this works
    MaxCellTextSize
    8000
    MaxNumDocAttachments
    -1
    MaxDocAttachmentSize
    -1
    Regards,
    S

  • Deactivate "Legal Control" service

    Hello gurus,
    we would like to use the Sanctioned Party list Screening ONLY.
    Now, we had an export customer order that was blocked because of the Legal Control service. We checked the protocols and found out this was because of incomplete customizing for that service. We had not maintained all the setting because we did not want to use the service anyways.
    So, I went to IMG -> SAP Global Trade Services -> SAP Compliance Management -> u201CLegal Controlu201D Service -> Activate Legal Regulations and deactivated the active Legal Regulation for exports (i.e. set u201CLegCtrExp.u201D to u201CCheck: Not Activatedu201D).
    The result is that the export orders do not get blocked any more, but there is a warning saying u201CUnable to find any active legal regulations for determination proc. u201CLELDTu201Du201D.
    Although this is no real problem, all the yellow warning signs do not look good and I wonder if it is possible to deactivate the u201CLegal Controlu201D service all together.
    Any ideas on this?
    Thanks
    Alicia

    Hi,
    Depending on the version of GTS you are using and what part you still want to have activated there are several solutions.
    1. in General Settings / Legal Regulations / Define Legal Regulation, delete the country assignment to the Legal regulation
    or
    2. in the same customizing point you may delete the legal regulation totally, if you need it again you can then make an adjuster with the 000 client
    3. SAP Compliance Management / General Settings / Document Structure / Activate Document Types -> delete the document types for Legal Control.
    Regards.
    Marc

  • Problem in Data extraction into BI

    Hi Guys,
    I am having a strange problem and unable to idenitfy the root cause. I am hoping that some one can help me with this issue.
    System Details:
    BI 7.0
    SAP ECC 5.0
    Current Design:
    We have created a DSO in the BI system and created a custom extractor to pull the data from SAP ECC 5.0 into the DSO.
    The custom extractor is using the option "Extraction Frm SAP Query" and using a custom infoset. This is the transaction type data source.
    Problem Statement:
    When I run the RSA3 transaction for this extractor, the extractor brings 1870 records. However when i run the Infopackage in the BI system to bring the records into the DSO --> PSA then i am only getting 823 records.
    Question:
    Why am i seeing this difference in the number of records in RSA3 and in the BI system? I am NOT using any selection or filter conditions in the Infopackage. And i am only getting the data till PSA. So i was expecting that in PSA i can see 1870 records same as that i see in RSA3. Any idea what is missing?
    Thanks in advance !!

    Hi,
    The infopackage ran for full load and not for delta load.
    I looked at the rsmo and at first glance everything looks fine. But when i look at the details tab i can see that the overall status shows as RED and it says
    Overall Status: Errors occured: or : Missing Messages
    I am not clear what this means. I dont see any other nodes in RED. Every node is in green except the top most node which is in RED and shows the above message.
    Any idea what could be the problem?

  • Custom Dimension - Customer Field

    Dear All,
    Please help in following questions:
    1. Whether 'Custom Dimension' is interchangeably used for 'Customer Field' in ECC6.0 New GL?
    2. If no, where are the IMG activities for custom dimension?
    3. If yes, do I need to create a master record for individual item in a customer field? For eg. customer field is created for 'Vehicle No.', for each vehicle, do I need to create a master record for capturing the vehicle code (where vehicle code is defined in other system running parallel to SAP & through interface for creating an accounting document, we are taking the same into SAP)
    4. Whether creation of master record for customerr field is always an IMG activity?
    Your earlier reply will help me in closing certain issues faster.
    Thanks & regards,
    Amish.

    Hi Kan
    What kind of field do you need to add? Dimension or Measure?
    Based on your initial investigaton, I will asume that its a dimension (SPM also has multiple custom measures per object).
    I guess the confusion arises with the nomenclature (which will be cleared in the next release - they will be all named Custom Dimensions 1 - N).
    0XSARC001C1 to 0XSARC001C7 and 0ASAC001C1 to 0ASAC001C8 are available for customizations. They total to 15 custom dimensions. The ones 0XSAR* are defaulted into the data model and wired up from the inbound all the way to the cube. The remainder of the eight dimensions 0ASA* are also available for custom usage but might or might not be wired into the data model out of the box. For the cases where the custom fields are not part of the data model, feel free to bring them in as part of your customizations.
    What you need to be mindful of is that the way these dimensions are plugged in, as an example the field 0XSARC001C1 is set to be a "Line Item Dimension" in the 0ASA_C02 - Invoice cube.
    The other mis conception, especially for people new to analytics and BW, is that these are custom "fields" for the respective objects. Thats not really the case, since they are joined "at the hip", so to speak, in the reporting layer multiprovider. The custom dimensions would need to MEAN the same across objects. For example if you set the custom dimension 0XSARC001C5 to mean Procurement Sustainability Factor in invoice, then this field has to hold its meaning of being Procurement Sustainability Factor across all of the other objects (Contracts. POs, etc...).
    Hope that helps.
    Regards
    Rajesh

  • How can I insert a Pages, Doc, or PDF file into a Keynote presentation?

    I need to insert a document (.pages, .doc, or .pdf anyone) into a Keynote for a portfolio that I must present.  How can I do this?  It doesn't give me that option under hyperlink in inspector. 

    the best is to insert screenshot directly in keynote. If it's for a paper version save everything as pdf and compile with "combine pdf".

  • Which table Embargo legal regulation on customs document can be found?

    Hi,Expert:
      Do you know in which table the embargo legal regulation on customs document item can be found? In table:/SAPSLL/LEGCON, there is no embargo legal regulation information.
    Thanks

    In our company, we have defined two embargo legal regualations,for instance,EMB01 and EMB02 which are determined according to the departuring country of sales item.
    But I can not find a table in GTS which has the information regarding which embargo legal regulation is used on the sales item.In table:/SAPSLL/LEGCON, you can find the legal control related legal reguation but not embargo legal regulation.
    I am not wondering if the embargo checking result are not stored in table at all but generated as a view when you check it.

  • How to control authorization about terms of payment in customer document ?

    Dear,
       I need to control authorization about terms of payment in customer document. the terms of payment fields can only be maintance by some persons, others persons can not be maintance the terms of payment, although they have the FD01 or FD02 athourization.
       how can we archieve this programme?

    Hi,
    Like T.Nishanth says, use tcode SU21 to create your own auth.object. Mantain it with tcode PFCG.
    Only an additional point. Use the enhancement SAPMF02D. In the include zxf04u01 (EXIT_SAPMF02D_001), click on 'pattern' and in the pop-up dynpro, try the field authority-check and populate it with the auth.object created before.
    After, check it with FD02, XD02 and so on.
    I hope this helps you
    Regards,
    Eduardo

  • How to - Extract data from Cloud For Customer into SAP HANA system

    Hello Community,
    I have a requirement for extracting the existing data from Cloud for Customer into separate SAP HANA Box.
    Is it possible to achieve the same ? If yes, Please guide me for the same.
    Awaiting quick response.
    Regards
    Kumar

    Hi Kumar,
    In addition to what Thierry mentioned you could also use the C4C integration via standard Operational Data Provisioning (ODP) interfaces. This integration was acutally built for SAP BW and allows you to access any C4C data sources. From my perspective you can also build upon that for a native SAP HANA integration. Please also have a look at this guide: How To... load SAP Business Suite data into SAP... | SAP HANA.
    Besides that question let me also add the following: SAP Cloud for Customer already runs on SAP HANA since Nov. 2013. You may also use the powerful built-in analytics within C4C for analyzing data and any of your reporting demands. If your report should consider external data as well, you can combined the existing C4C data source with an external, so-called Cloud Data Source. More infomation is published in the C4C Analytics Guide: http://help.sap.com/saphelp_sapcloudforcustomer/en/PDF/EN-3.pdf.
    I hope this helps...
    Best regards,
    Sven

  • Custom Document Definition - XPath Tab

    Hello B2B Gurus
    I am trying to understand the value of the XPath Tab for Custom Document Defn.
    1.What functionality does it provide? Documentation refers to extracting value form the Payload.
    2. I have a requiremnt to extract PO number from the payload. Can I search Reports based on the PO Number?
    3. Why do we have a hard limit of 3 XPathNames?
    XPath Tab
    XPath Name1
    The XML XPath name for retrieving the value from the payload
    XPath Expression1
    The XML XPath expression for retrieving the value from the payload (see Note below table)
    XPath Name2
    The XML XPath name for retrieving the value from the payload
    XPath Expression2
    The XML XPath expression for retrieving the value from the payload (see Note below table)
    XPath Name3
    The XML XPath name for retrieving the value from the payload
    XPath Expression3
    The XML XPath expression for retrieving the value from the payload (see Note below table)
    Thanks

    1.What functionality does it provide? Documentation refers to extracting value form the Payload.Yes, XPath is used to extract the values from the payload and you can see the extracted values at runtime on Reports. Currently there is provision of providing three XPaths and you can see all three XPath's value in reports. Basically it should be used for tracking purpose.
    2. I have a requiremnt to extract PO number from the payload. Can I search Reports based on the PO Number?Yes, actually this is the basic reason of having this functionality in Oracle B2B. To search on the basis of PO number, extracted by one of XPath expression, go to Reports section, click on "Advanced" button on right side of search section. This will enable one more button "Add Fields" beside "search", "reset" & "save" in the search section. When you click on "Add Fields", it will show a drop-down where you may select any of the parameters. If you select a XPath expression (for e.g. Xpath Expression1) then a search field "Xpath Expression1" will get added in search section. Now you can provide a value and criterion for seraching i.e. "Equals"/"Starts With"/"Contains"/"Ends With". Once you click on search button after proving value and selecting criterion, respected reports will get displayed.
    If you are on 11gR1 PS3 (11.1.1.4) then you may also use InstanceMessage API to programmatically access the instance message data. Here also you can use the xPath expression value -
    http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/b2b_api_imsg.htm#BABFEFCD
    http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e18158/toc.htm
    3. Why do we have a hard limit of 3 XPathNames?Generally this feature should be used for extracting key values from payload for tracking & monitoring purpose and hence limited to three. If you have a strong use case where you need more than three XPaths, then raise an ER with support and after reviewing your use case, B2B development may come up with a solution (may be a patch for current release or enhanced feature in future release)
    Regards,
    Anuj

Maybe you are looking for