Send E-Mail over two different Mail Server ?

I successfully configured E-Mail in HTML DB according to the How-To "Send E-Mail from HTML DB Applications".
There's one point in our environment that is a little bit special. The HTML DB application should work for two companies. So it works for company A because every message is sent to the corresponding Mail Server. Of course messages to company B are rejected because the Mail Server of company A is not configured to accept these messages ( relaying denied... ). Is this a Mail Server administration issue or is there a possibility to implement an if then else functionality for Mail Server in HTML DB ?
Thanks Tobias

htmldb_mail supports a single mail server per htmldb instance. if you want to call different mail servers, consider sending the emails via your own calls to utl_smtp. there's a pretty simple example of that code at...
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:1739411218448
...hope this helps,
raj

Similar Messages

  • Autodiscovery and coexistence of two different exchange server

    Hi all,
    I'm trying to understand how autodiscovery works during coexistence of two different exchange server.
    We have one AD server and two different Exchange server and two users (A and B). 
    The mailbox of user A is in Exchange server ONE
    The mailbox of user B is in Exchange server TWO
    They are creating for the first time their profile in outlook. How autodiscover works in this scenario?
    Maybe the information are too few but I want to understand if in a scenario like this, Autodiscover can work with appropriate configuration or there is now way to use autodiscovery.
    Thank you
    Best Regards
    Riccardo

    Hi
    Riccardo,
    You dont need to worry about autodiscover if both are in the same forest.
    You just point your autodiscover to one of the server. It will proxy to the right server.
    For example if your autodiscover pointed to ServerONE and when a request comes from UserB, ServerONE will
    proxy  the request to ServerTWO. 
    Normally all point autodiscover to the internet facing server.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Can we send the same message two different recievers with sequence

    Hi,
    i am sending the same message to two different receviers without using BPM.
    now i require to send with sequence.is it possible without BPM?

    Hey
    There are two options for this
    First one is to use Wait step in BPM as other experts suggested.
    Second one is a dirty way around,what you can do is send the second message to a dummy receiver first(may be a file on your XI server),then design one bypass scenario which will pick up the file after a specified time interval(give the poling interval you want).
    i would go for BPM coz its pretty straight forward,but in case you want to avoid BPM then u can use the second approach
    for bypass scenario,have a look at the following
    How to send any data (even binary) through XI, without using the Integration Repository

  • Sending log data to two different files using log4j

    Hi,
    Can some one please help me with my problem I have here?
    I want to send log data to two diffrent files depending on the logging level such as DEBUG and WARN.
    How can you configure this in log4j.properties.
    Please post sample code for log4j.properties to achieve this.
    Thanks in advance.
    rsreddych

    Hi,
    Finally, I found the solution to this problem my self.
    What you need to do is define two loggers in the application, and set two priority levels to these loggers and define two out put files to these loggers. Deploy the war file, restart application server and you are good to go.
    This seems to be working for me. Only glitch I found is, the out put in
    the second file is displaying one space character at the start of line starting from second line (First line don't have this problem). This is odd. It may be because of my faulty code. Any how thanks for you all.
    rsreddych

  • Cannot Send in Mail : server does not support authentication

    I can receive mail, but cannot send. The error message I'm getting is: The SMTP server "smtp-server.rochester.rr.com" doesn't support authentication." I have Time Warner Road Runner. The settings for the outgoing server are as follows:
    server: smtp-server.rochester.rr.com
    port: 25
    SSL: no
    Authentication : Password
    The username and password work fine with Webmail or mail2web
    Please help!

    I had a similar message from Road Runner and when I turned authentication off, I got the following message: "This message could not be delivered because your SMTP settings are not set." Suggestions?

  • Problem sending with mail server?

    Almost every time I send an email with my gmail account a pop-up screen tells me that it was unable to send the message using smtp.gmail.com
    I then click try again or use this server and it eventualy sends using the same email address but most of the time the pop-up screen comes up and I can't understand why.
    Other time however the message will send immediately.
    Any suggestions as to how I can stop the pop-up screen displaying every time I send a message?
    Thanks.
    Dorian

    Dorian,
    There are some citations from Gmail sources that also mention Port 465, first. The only difference would be if the ISP you were using at the time wanted to see you using Port 465 when using SSL (more standard, perhaps) than using Port 587 with SSL. I use 465 myself -- see:
    http://mail.google.com/support/bin/answer.py?hl=en&answer=13287
    for citing of both ports. Try 465 and SSL and let me know if there is any change.
    Ernie
    Message was edited by: Ernie Stamper

  • TS3899 Can't send emails, what are the different outgoing server numbers i can use ? 25 ? 587 ? 578 ? Thanks !

    Cna't send emails, to what to i change the outgoing server ? Thansks !

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • Sending Sync Request to two Different Receivers.

    Hi,
    I have a scenario where the synchronous request with single operation has to be sent to two receivers(different systems) with one being async and another one being sync. The response from the second receiver has to be mapped to sender.
    Though this can be acheived with BPM, I am looking for a better solution.
    PI SystemDetails: 7.1EhP1
    Regards,
    Manikandan R

    Hi,
    Can u please specify the sender and receiver communication channels u r using for this scenario??
    It depends upon the adapters u r gng to use in ur interface.... that whether u can also achieve without using the BPM or not
    will be decide..
    So specify the adapters in sender and receiver....
    Babu

  • Query : Send same data to two different systems

    Hi,
    We are getting data from BI to PI through proxy. And using soap adapter we are sending the data to non sap system.
    Now my query is : I want to send the data which came from BI to PI to two non sap (Prod and Quality) systems. How can we do that? Waiting for your help me on this.

    Hi,
    You have to add 2 receivers in receiver determination (one for quality & one for prod).
    After that, create 2 interface determinations separately one for each, also 2 receiver agreement & 2 receiver channels.
    -Supriya.

  • How can portal use two different LDAP Server in UME

    Hi,
    My question is Can UME in portal be configured for multiple LDAP sources.Currently i have a setting in portal
    as follows:
    Server Name : Abcd
    port : 1234
    user : CN=" ",Ou=" ",Ou=" ",Dc=AD,Dc=my company,Dc=com
    password :
    user path : DC=AD,Dc=My company,Dc=Com
    group Path : same as user path
    I want to configure one more LDAP server to my portal UME,how can give values for that in above sttings.I even want these current settings to be enabled.
    Do anyone have idea on this.
    Thanks and Regards
    Rani A

    Hi again ,
    I know it can be done. But how urgent is this for you.
    I can get back to you in couple of days, me lil busy today.
    cheers,
    Anu...

  • Mirror the same audio over two different outputs

    Hi,
    I've got a MacMini (late 2009, running Lion) set up in my living room and connected to my HDTV. The audio goes to my amp via the built in digitial audio out and toslink cable.
    I recently added a second TV in my bedroom and connected it via the mini display port and a HDMI cable. Unfortunately this version of Mini does not support audio over mini display port so i bought a separate USB audio card. This is connected via a Jack plug to my audio in on my bedoom TV (no amp here, non-digital stereo audio).
    I would like to be able to have video and audio in both rooms at the same time. Video is working very well, but the audio does'nt come along. I can only set the audio to one output. I tried to make an Aggregate device, but still the audio sounds over one output. I tried this with both stereo audio (music) and with 5.1 audio.
    Offcourse I googled and found that an aggregate device is used for creating multiple channels for audio, not for mirroring.
    What i'm looking for, is some kind of setting or software(i hope) that can mirror my audio to both outputs, and if nessecary, format into the right source (5.1 for the toslink and 2.0 for the USB device). Ofcourse, everything needs to be in sync with video and eachother.
    Is there such a thing?
    Thanks for any help offered.

    1) Don't know why this is happening. It may have something to do with
    I downloaded from iCloud the same library I was working with
    I'm not clear what procedure you're using here. Using a cloud for storage might change some file tags. Generally users I think keep the library on the same drive as the media, keeping the library backups on the system. There is no real benefit in keeping the media in a separate location. Often users will keep the library in the same folder as the media. It makes backing up using tools like Carbon Copy Cloner very efficient.
    1a) This can be difficult to find as there sometimes is no obvious indicator. It might be a missing element in a compound clip, a missing or altered layer in a graphics file, a missing font, a missing effect. These will show up inside the item involved, but may not be apparent in the browser. A missing transition for instance will not be seen until you skim over the project or try to export it.
    2) The 43 MB is a small amount of optimized media. This never prevents relinking. The library is always looking for original media, or proxy media if you're in proxy playback. It never looks for optimized media. If it has it, it uses it, if it doesn't, it uses the original media. If you are using original/optimized playback, you must have the original files. The optimized files are not enough.

  • Send PO to two different external adress

    Hi
    I need to send my PO to two different external mail adress, is that possible?
    now i can send the PO to a sap USE, and i need to add another message to the vendor.
    I've tried to set two message record ZMAIL(vendor) and ZUSE(user), but only sap user can receive the PO.
    Can you help please
    Thanks

    Hi,
    You may Please check the vendor address view at the field mailing address.Howmany mail ids are provided there?
    Take the Extensiom icon there and keep the two mail id's there and provide the sequence there.and fill all the fields there.
    Now pl check the ouput type for its driver programe wheather it can fetch the mail id's.
    If possible maintain the condition for this combination and select the time as save immediately and try saving the po and check the sost t code.
    Please try the same and let me know the comments.
    Regards,

  • [php+mysql] send e-mail with custom content

    Hi all
    <br />I'm trying to send an e-mail with custom content.
    <br />I've set the MX send e-mail server behaviour so that it sends an html
    <br />template.
    <br />
    <br />no problem here.
    <br />
    <br />The problem arises when I try to put some variables in the template file.
    <br />Transaction variables work as expected and they will be sent by email.
    <br />But I cannot figure out how to include other standard variable.
    <br />I use variables to translate the page on the fly.
    <br />I have an external file containing all translations and I include it on my
    <br />translated page.
    <br />Then I output the translation using the echo command:
    <br />example:
    <br />Here is the content of the include:
    <br /><?<br /?>
    $menu["AZIENDA"]="COMPANY";
    <br />?&gt;
    <br />
    <br />In the translated page I put the related variable in the body:
    <br /><?php echo $menu["AZIENDA"] ?>
    <br />
    <br />But when I put <?php echo $menu["AZIENDA"] ?> in the template file, nothing
    <br />will be output.
    <br />
    <br />What is the right way to do this?
    <br />
    <br />TIA
    <br />
    <br />tony

    Hi,
    look here:
    Re: How to email an attachment with more than 255 characters?
    Andreas

  • Use one agent for two different managment servers

    Hi ,
    Can one agent be connected to two different managment server in different domains ,
    or do i have to install two agents in the same server to connect to each managment server .
    thanks

    Can one agent be connected to two different managment server in different domains
    No
    do i have to install two agents in the same server to connect to each managment server Yes.

  • BPM scenario to send same file data two RFC function modules

    Hi,
    Scenario:same file  need to send the data to two different RFC functions.
    so in this case i need to use two receive steps or only one receive step? beause file should be places in the archive after second rfc triggered.
    but this scenario client need to go with BPM only .I am new to BPM.please suggest the steps and process need to follow for this scenario.

    Hi,
    You will have one async receive step to start the BPM from your file interface, 2 synchronous send steps for each RFC, and an async receive step to archive.
    Don't use the transformation steps in BPM, as it decreases performance. You can use the same abstract interface for your file format in the send steps, but specify different Send Contexts for the receive steps. In Configuration, use a condition on Context object ProcessStep = Send Context from your BPM, and route to the correct RFC interface, using a mapping from your file to the RFC.
    Hope this helps !
    kr,
    Peter Glas

Maybe you are looking for

  • When downloading a file from Safari, it goes to downloads and you can't re-name the file before it is saved

    I am new to MAC and have trouble when downloading files from Safari that I want to save to a particular folder with a new name.  Can you do that without first saving to downloads, then moving the file to the documents stack, then changing the name?

  • Skype shows that it is calling the wrong number

    (Skype version 7.2.0.103 running on a Windows 8.1 desktop computer.) As of this morning I been having an issue with skype where it shows that it is calling the first of three numbers I have set up for a contact, even when it is in fact calling one of

  • Problem in Integration of BI Reports with NWBC

    Hi all, I am facing a problem when integrating Bi reorts with NWBC (Netweaver Bussiness client).I Created a role for that and when i add the BW reports in it,after saving it's displaying it as ABAP report and automatically changed the selected option

  • Speed of a shape style

    This seems like it should be be easy but I have been racking my brain for awhile. I have created a straight line and change the shape style to one of the light streaks. The streak has it's own built in write on behavior. How can I adjust the speed of

  • Vector in java

    hi all i m having one vector and i need all elements of that vector except first element. can anyone help me? my vector is like [xyz,pqr,abc,mno] out of this vector i don't want vector element ' xyz'. how to do?