Send Email Form10gIDS through outlook but no smtp / mail server available.

how i can send email in oracle?
but i have no smtp server.
outlook configure with gmail/hotmail
oracle can send through oulook
because i will try directly gmail port 465 in gmail but not access

Junaid.
try this may it helps u.
Go to Control Panel->Add or Remove Programs->Click on
Add/Remove Wndows Components
Check IIS check box.
Select Internet Information Service (IIS) option and click on Details button
Check whether SMTP Service is checked or not.
If not selected then select SMTP check box.
This process should be done on server.
It will help out from ORA-29278: SMTP transient error: 421 Service not available problem.
Furthermore, Oracle MetaLink documents also offers information regarding ORA-29278 in conjunction with "attempting to utilize UTL_SMTP on Microsoft Windows 2003 Server utilizing Oracle Database."
It states that to aid in resolving ORA-29278, the document advises that the user, "Shutdown any applications that are blocking or preventing use of the port, 25, required by UTL_SMTP." because the cause of the error may be associated with other applications (like anti-virus utilities), "blocking access to the port required for UTL_SMTP."
sarah

Similar Messages

Dpm 2012 email notification using a non-exchange smtp mail server

Has anyone successfully been able to configure DPM 2012 to send email notifications to a standard SMTP mail server (NON-EXCHANGE)?

Hi Happy,
I try with IIS6 SMTP server with Anonymous Access.
From DPM side, settings for "Authentificated SMTP Server: Username/password" :
1- Leave blank =>ID 2013 : logon failure : unknow user name or bad password.
2- DPMServerName\UserAccount => Works :)
Network trace with Wireshark :
1- Nothing => Most likely blocked by DPM console : Authentificated SMTP Server must be fill.
2- See full SMTP connection, mail send.
Could you do network trace to see what's happen ?
Stephane
Please remember to click “Mark as Answer” on the post that helps you. This posting is provided "AS IS" with no warranties. knowledge is valid only if it is shared by All.
My DPM blog Yet Another DPM Blog

I run a gmail email address through Outlook 2013. How can I synch Contacts to my iPhone 4? iTunes doesn't do it. Verizon doesn't know how.

Greetings Experts
I run an email address through Outlook 2013 on my PC. I want to synch my Outlook Contacts and Calendar to my iPhone 4 but iTunes isn't doing it and 3 Verizon stores have failed. Advice? Suggestions? Solutions?
Thanks
JohnnieBGood

Hi randers4. Already have. I have two (2) gmail addresses - only one of which I run through Outlook. Both are set up in GMail on the iPhone under Settings but Contacts and Calendars are only set up to synch on the account that goes thru Outlook. My email from both merge OK on the iPhone but Contacts and Calendars from Outlook doesn't come over and its the only one i have the Settings turned on for Contacts,Calendars and Notes.

BO2069: failed to send email med.Microsoft outlook

HI ALL,
We have an erro to send a document by sapb1 using Outlook integration BO2069: failed to send email med.Microsoft outlook
If i open the outlook this erro occurs if i close the outllook the documents sends without problem. Is not funcional becase the user needs his outlook open. Icant found information about it.
Could you helple please?
regards.
NANCY HERNANDEZ.

HI GORDON,
I checkt your link and y I´ve aplied all suggestions but i have de same problem. the question is, Is normal that we have to close outlook to work ok with ms outlook integration in sap?. because this error doesnt appear when msoutllok is close. but this is not functional.
i hope your soon support.
Regards
NANCY HERNANDEZ.

Can no longer send email from my accounts but can receive

I have 5 email accounts set up on my imac. 3 are mine 2 are my partners. I can no longer send emails from my accounts but my partner still can. They all still receive mail but when I attempt to send mail I get:-
Cannot Send Message Using Server
Then i'm asked to select a different server from a list. I have tried all but to no avail.
I first of all deleted my partners sky.com account because it appeared to me that this was maybe overiding all other accounts and it was no longer needed on imac.
I then deleted one of my accounts - hotmail, to see if i added it again maybe it would work but now I cant even re add the mail account as everytime i go to mail, preferences account to set it up again the initial screen comes up with my partners details including the sky.com username and when i overwrite these and try to install hotmail acount I get told that logging in failed check user name and password is correct. Which they are.
All used to work fine but now I have these problems, they appeared to have started when my partner set up an icloud account and is synching with this - could this be the cause?
I can send email from my accounts from iphone still but no longer from imac.

First,
I'd run all availiable software updates. After that, I would try removing all of the accounts from "Mail", and then re-adding them. Be aware that if your folders and such are located on your mac, and not on the mail servers, you may risk lose some information (always have a back-up).
Sometimes, when you have a number of e-mail account there can be server issues abound. I would go into the server lists and make sure that they are set properly. If you see the "use only this server" box, check it for each of them.

I have not been able to send email for some time but now i have stopped being able to recieve email.

i have not been able to send emails for some time but in the last two days ive stopped being able to receive, the message says 'username or password incorrect' ive checked all the settings, ive deleated accout and set up again, ive rebooted phone. i tried to sync with pc but this also fails any ideas

That is correct, They don't seem to know about Mac, never got a single scrap of help from them. Try recreating your account from scratch, delete the account, (write down all your settings first) and add an account, see if that works, and if it does, delete the first account to prevent things doubling up on you. I think that's what I did, it was quite a while ago. Hope this helps, or gets you pointed in the right direction. Maybe go to At&t and try creating another account, and if ti works, delete the first.
One other tihing I did was to reset Safari, as AT&T uses the net, that's about all I can remember, like I said it was awhile ago.

How do I send email to a group but not have their address show?

Entourage has a function where you can create a group but check a box that says "do not show addresses when sending to group". I want to be able to send email to my HOA, but not have everyone show up and not use bcc if possible. Is there a way to do this?

Mail Prefs, Composing, uncheck the box, "When sending to a group, show all addresses."

We had a contaminated email and now we cannot send emails . our service provider thinks problem in 'mail' settings but did not want to get into that area. Can you advise how we look into this

we had a contaminated email and now we cannot send emails. Our service provider advises that 'Mail' settings may be compromised. but were not willing to get into resetting. How can this be fixed ?

jenfromwa wrote:
we had a contaminated email and now we cannot send emails.
Not exactly sure what you mean by contaminated, but there is currently no known e-mail that could impact the Apple Mail application as you have described.
Without knowing who your e-mail provider is and what type of account (IMAP or POP3) we can't advise you as to what those settings might be.
One way to fix it would be to delete the account from Apple Mail Preferences->Accounts and add it back.

I 2 mailbox - sending email from mailbox 1 but answers enter into mailbox 2. how to solve?

2 mailbox - sending email from mailbox 1 but answers enter into mailbox 2. how to solve?

Mush,
Thank you for your advice. I checked the outgoing server as suggested and found that my accounnt the gmail sever was marked offline. I changed that but the the problem was not solved. I am sending a message from [email protected] and the answer comes into [email protected] marked as Jacob Zak<[email protected] What is stange is that this happen only for certain emails not all of them.
Thanks

Can not send email from Mac, iPhone, or iPad using mail using iCloud.

I can send email from the icloud web page but I get error messages that the icloud outgoing server is not recongized when I send email from my iphone, ipad and Mac mail. I can receive icloud email okay on all devices. I have manully setup a icloud server per instructions on icloud support page for mail's outgoing server name. It still is not recongized.

I found a work around that works. Got to Settings...Icloud....account......advanced....outgoing mail server.....
Add an "other" server.
Host Name p01-smtp.mail.me.com
Put in your me.com email address as username and your Apple ID password
SSL is on
Authentication is password
Server port 587
This worked for me.....I will use this until the bug is fixed. Don't make this server your primary. Leave it in "on" status in the other category.
Good luck

TS3899 cannot receive or send email from my hotmail account, refuses to verify server. I have changed my password, deleted the account numerous times, any solutions? all on ios 6.

cannot receive or send email from my hotmail account, refuses to verify server. I have changed my password, deleted the account numerous times, any solutions? all on ios 6. it was working up until a few days ago and now refuses to load on both my ipad 2 and iphone 4S
in the process deleted all my contact, very annoying.
all help is much appreciated.
interesting that my gmail account does work perfectly.

this may or may not help - but give it a try. On a forum some were reporting that talk21 is now under the yahoo umbrella. below are the steps this use listed. (This was an android forum, but the email settings should be the same. In short it looks like their server names have changed. An existing account may have simply been forwarded - but if you are reinstalling, it may want a clean install to the right servers.) Pay particular attention to the server names and port settings. (this thread was started based on a discussion of Imap vs pop - you are already an Imap person - so ignore that part)
See if this helps.
why settle for pop3, when IMAP works with talk21 and not only does mail get pushed out faster with IMAP, but when you click refresh it will be received faster than pop3. The other advantage is subfolders are also supported with IMAP but cant be seen with POP3. This mail feature works with my android eclair & hero phone and the settings are exactly the same for win mobiles also (not tested). The mail setting up roadmap is the same from what i can remember once in the mail feature for win mobi.
This is what you need to do to setup Talk21 email with IMAP.
Incoming server settings
IMAP server - imap.mail.yahoo.com
Port - 143
Security type - none
Outgoing Server settings
SMTP server - smtp.mail.yahoo.com
Port - 25
Security type - none Also important note - Enable 'require sign-in'
and enter your talk21 username and password The End...works a treat for me p.s. Its only taken me 3 years to work it out with win mobile and recently with android. Finally got it to work...hope this helps all the talk21 users out there. if there are any other similar posts out there with no answer...dont forget to mention my name when passing this post around.

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email. What is happening?

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email to the same recepient. What is happening?

I talked with a tech today and he said I cloud is having problems which should be resolved shortly.
In the mean time I used the .me smtp server settings which allowed me to send mail.

Dealing with two email accounts that use the same SMTP (outgoing) server

Folks:
re:   mail.app 5.2 (MacOS 10.7.4) with respect to POP accounts only
I've read this thread multiple times, spent many hours experimenting, and my web searches haven't come up with any more useful help.
How do you persuade mail.app to accept settings for two similar, but distinct email accounts that use the same SMTP (outgoing) server?   Say, the accounts are "blue.example.com" and "[email protected]". These have different user names and passwords.   The SMTP server is "smtp.example.com".
I think this is the appearance of success: the SMTP Server List (as seen in edit-the SMTP-Server-List mode) shows:
Server Name                   In Use By Account
    smtp.example.com      [email protected], [email protected]
(Description column omitted for brevity. And of course, mail.app doesn't show the little envelope icons.)
But I cannot reliably achieve this result.   When I select the SMTP server from the list for the second account --as suggested in the above-referenced thread--- I see the credentials (user name and password) for the first. Should I overwrite them? No, I don't think so -- I think that will break the first account.   I feel mail.app should present me with empty credentials boxes instead. Maybe this happens -- sometimes. But I can't see how to make it happen. Am I simply overlooking something?
A slightly different way of asking about this issue:   Suppose I manage to do a proper setup for the two accounts and they work. Then I change the password for "[email protected]" on the server. What is a reliable way of reaching the SMTP credentials for that account to make the edit? Same question for "[email protected]"?    Even when I successfully attach two accounts to one SMTP server, I seem only able to reach the first listed one to make changes. (In this case, "blue.example.com").
It is possible I'm missing something incredibly obvious...    I know the credentials for each account are distinct, but maybe mail.app copies them from the POP (incoming) settings.   Nah, that can't be, can it?   Or what?
Maybe I'm seeing bizarre things due to scrambled mail.app preferences. I've seen it before on other apps: delete the current preference file, get an auto-generated fresh one, and sanity returns. But with mail.app, with the prospect of losing years of emails --yeah, I've done it-- I'm extremely reluctant to mess around.
Suggestions, please.
TIA
Message was edited by: Hen3ry to clean up the table a little and add a parenthetical explanation.

OK, I'm convinced.   The mail.app UI is BROKEN -- in my primary user account. Such that it cannot reliably select an outgoing server for editing.
I created a new user account and installed some relevant example accounts in mail.app in that account. No problem. Well, a bit obscure, but still fully logical and reliable selection of individual SMTP accounts for editing.
For the sake of clarity, I think it is best to mark this "answered" and repost, focusing on the symptoms and asking how one might go about repairing the problem. So I'll do that.

I keep trying to send emails and it says its rejected by the server because it doesn't allow relaying... Any ideas how to fix?

I keep trying to send emails and it says its rejected by the server because it doesn't allow relaying... Any ideas how to fix?

There is something else that can cause this issue. Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

BLS Send Mail Action Block Requires SMTP Mail Server Mail Account

My SMTP Mail Server does NOT require authentication. It appears as if MII Ver 12 requires a mail account to be filled in on the BLS Send Mail Action Block. If the mail account field is left empty the transaction fails (error - mail account cannot be blank). Transaction works without the mail account on Ver 11.5 but Ver 12 requires the field to filled in. Please advise whether this is a new requirement in Ver 12 or a bug that needs to be addressed.

Hi Sam,
What I think is, it requires one mail account to send the mail and one to receive it.
There is no restriction on receiver that can be anyone. But the sender needs to be known that some mail has been sent from his mail account. So may be because of this the added authentification is required. It will use that mail account to send the mails.

Send Email Form10gIDS through outlook but no smtp / mail server available.

Similar Messages

Maybe you are looking for