Send email to a cell phone

I need help with my application. I am sending a regular mail using an SMTP server to a cell phone using a destination email like [email protected] for example.
My message gets to the cell phone successfully, but not formatted properly:
In my cell phone Inbox category I see some number:
502
and the message looks like this:
[email protected]/Subject line/Message body
What I want to see is:
[email protected] in the inbox folder
and the message should not contain the sender:
Subject line/Message body
I now this is possible to do because it works when I send the message from yahoo or gmail for example, but my code doesn't do it right.
Any help is apreciated.

You probably need to know more about how your phone software is
interpreting the messages for display. If you just want to send a message
without a Subject, that's easy to do. But if your phone software expects
the message to be formatted in a particular way, or the Subject to appear
in a particular way, you're going to have to ask the phone software vendor,
or figure it out by trial and error.

Similar Messages

  • Sending emails from my cell phone

    Is anyone experiencing issues sending emails through their cell?  Since I check my emails quite often on my cell phone, LG G2, I recently (about a month or two) have run into an issue that when I reply it sits in the Outbox and then eventually fails.  I keep resending and I can eventually get it to send.  I am having this problem from home and work, but I know I was always able to send from both locations in the past.  Has Verizon changed something?  It's very frustrating because as I said I do use my phone frequently for my email correspondence.  Any help or suggestions would be appreciated.

    Are you perhaps a Yahoo email users?  For such the userid now requires @verizon.net be added to it.  This is not true for those not using the Yahoo email interface.
    Othewise just check your email settings
    Server settings/ incoming settings
    Email address: [email protected]
    username: xxxxx (yahoo users use [email protected])
    password: yyyyy
    pop3 server: pop.verizon.net  (yahoo users use incoming.yahoo.verizon.net)
    security type: SSL
    port: 995
    delete email from server:  (your choice) i have mine set to when deleted from phone.
    Server setting/outgoing settings
    SMTP server: smtp.verizon.net (yahoo users use outgoing.yahoo.verizon.net)
    Security type: SSL
    Port: 465
    Require Signin checked
    username: xxxxx (yahoo users use [email protected])
    password: yyyyy

  • Is an iPad 1 able to send and revive from cell phone number?

    Is an iPad 1 able to send and revive from cell phone number?

    Hamm77 wrote:
    Ok thank you .....but....it only gives me a place to enter emails and not send and recieve from a phone number....I appreciate your help Jonathan .... Thanks
    Exactly.
    Jonathan wrote:
    You can only send and receive iMessages on iPads-they do not do SMS
    The messages you send to phone numbers are known as SMS. The iPad cannot send those. Only iMessages through email addresses.

  • Email to mobile cell phone addr- returned -WAP encoding error

    My email to a cell phone url is being returned by web master (I think) and says: WAP encoding error.
    I can't find anything about wap encoding error on Thunderbird support or on the Internet .
    Can somebody help me? Cell phone person uses Verizon for email and I use Vista Home. My email to this address always used to work properly. Would my settings be wrong or could something change them unbeknowns to me?
    Please help.
    Thank you.

    Christl and Matt,
    Thanks for your help. My Mobile user checked her settings and all were okay. However, I checked my own settings and found when I set them to send email in "plain text" that my messages were sent and worked without any returned email!
    I had tried that UTF-8 and it worked for one time only as I recall. I think that setting would not remain and went back to Western encoding. Not sure of this tech stuff though!
    In any event my email is working just fine now and I do appreciate you guys helping me out. Seems to me that such an important problem should be included in Verizon's Help or highlighted somewhere for an easier find for any future same thunderbird problems. Surely thunderbird support should hilight it and paste it all over their help pages!
    Thanks again to all.
    Jimee.

  • Sending photos to other cell phones?

    On previous cell phones, I was able to sent photos to other friends' cell phones simply by sending it to their cell phone number. Can I do this with the Iphone? Some of my friends do not have E-mail addresses, which is why I want the ability to send photos to their phone numbers. Thanks

    Simply send your picture from your iPhone via email to the destination phone's MMS address (ten digit phone number followed by the carrier's MMS internet address (suffix). If you don't know it, just do a search and you'll find it's been posted a number of times before (ex., AT&T/Cingular's is '[email protected]').

  • Cisco ASA5520 Blocks email to/from Cell Phones

    Hi,
      I have erecently installed a Meraki (Now Cisco) Wireless Access Solution for my company. I have configured 2 SSID's, one for Wiress access to our LAN and the other for Guest access to the Internet only. These appear to work quite well, however some users are complaining that the email clients on their cell phones do not work when using this Wireless System. Web Mail Apps work fine however.
    Internet Access is via our Cisco ASA5520 and I strongly suspect this is the culprit. I have opened all ports associated with cell phones but still it does not work. Has anyone seen this kind of thing before?
    Pete

    Hello Peter,
    In order to determine if the problem is related to the FW you will need to take captures of the traffic when a client attempts to send email
    Here is the link about how to use captures on the asa
    http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080a9edd6.shtml
    With that we will be able to determine if the packets are getting stucked somewhere else or if this is an ASA problem,
    Cheers,
    Julio Carvajal Segura

  • How Do I Send Pics to Friends Cell Phones?

    PLEASE! The iPhone takes really great pics for a cell phone, better than most i've seen. But I cant seem to figure out how to send the pics to a friend! And they are blasting me, its like a sock in the eye...phone!! Any ideas?

    You may send email to your friend's cellphone's email address.
    Every carrier makes an email address out of the phone number, such as [email protected] for Verizon.
    In most cases, the carrier will convert the message into MMS because it's a photo and text.
    Here are some sample email addresses for some carriers:
    Former AT&T Wireless [email protected]
    Cingular [email protected]
    Metrocall [email protected]
    Nextel [email protected]
    Sprint PCS [email protected]
    T-Mobile [email protected]
    Verizon [email protected]
    ALLTEL [email protected]
    Use Google to find more, and, the carriers update these from time to time.
    (a) G5 Quad; (b) Mac Pro; (c) iMac G4; (d) iMac 24"   Mac OS X (10.4.7)   (a) 6.5 GB, Apple 30" + Cintiq 21; (b) 4 GB, Dell 30" + Samsung 215TW

  • Using VI Example Basic Serial Write Read to send AT commands to Cell phone modem error 1073807360

    I am using the NI Example VI: Basic Serial Write and Read to send AT commands to a Cell phone acting as a Modem.  I can send AT commands to this phone using Hyperterm when I select the modem driver by name in the hypert port selection field but not as com 7 which it occupies according to device manager modem properties. The basic serial vi does not show the modem driver as a selection, only ports by comX are shown. I get error 1073807360.

    Have you tried to put the name you enter in Hyperterminal in the VISA resource control? If Com 7 doesn't show, you can simply type "COM 7" in the VISA resource control. Or use "ASRL::INSTR 7".
    Also, make sure the connection in hyperterminal is closed, before you open the port in LabVIEW.
    Hope it helps,
    Wiebe.

  • Can't Send SMS To A Cell Phone

    This is a strange one - I have a friend who uses Sprint, and I was able to send messages to her up until the other day. Now she shows as offline. I deleted and recreated her address card in Address Book. Ditto deleting her and adding her as a buddy in iChat.
    I have other buddies who cell phones are accessible. I can send an SMS to my cell phone.
    What gives?

    One of my friend also have Sprint and I cannot send SMS via iChat to her. But just last week, she got a second phone (Blackberry 8330) from Sprint via work and I can SMS to that one.

  • How to send a mail to Cell phone number

    Hi,
      Here we are running several jobs a day and we would like to send a mail or information to cell phone number or pager when the job is failed.
    Is any body have any idea how do we send a mail to Cell number or Pager. If any body knows please advice me ASAP..as it is kind of urgent requirement which is to be fixed immediately.
    Thanks alottt  in advance
    -Srisa

    Please refer to the post in the ABAP forum. Thanks.
    How to send  a mailt to cell pone number or pager
    Regards,
    RIch Heilman

  • How do I send photos from my cell phone to my macbook air?

    I have an LG Optimus F3 cell phone with bluetooth.  I thought I could wirelessly transfer photos from the phone to my Macbook Air. 
    I successfully paired these two devices, but when I go into the Bluetooth menu and select the Bluetooth for my Macbook Air, the phone shows "No nearby Bluetooth devices found"  and in System Preferences in the Air, it shows my phone as "Not Connected".  I can't figure out what I have missed!   Help please!

    Thanks for the info!  Yes, my phone supports Bluetooth transfers and I had previously successfully paired both the phone with the Air and vice versa.  I also checked out the Air manual and the phone manual and everything was correct.... but, I gave up after several attempts and ended up emailing the photos from my phone.  It took a while but, it worked.  Next time I see my son, I will go over it with him becuase he is much more Mac savvy than I am!  I appreciate the input.  Thanks again!

  • How do you change your iMessages from your email to your cell phone number?

    MY cell phone number shows up in the messages settings but it will not let me use my cell number it's not even highlighted like my email address

    Hi Freekblood,
    If you are having issues linking your telephone number and your Apple ID/email address for use in Messages, you may find the following article helpful:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Regards,
    - Brenden

  • How to get emails on your cell phone?

    Is it possible to have my emails automatically set-up to send to my phone as well? I've read you can do this with Outlook and thought maybe I could set up Apple Mail to do this?

    If you mean you want to receive your e-mail messages on your cellphone as text messages, it should be possible to do this, but remember that an SMS text message is limited to 160 characters.
    Each cellular carrier maintains its own "mail to SMS gateway" - for example, the ATT gateway address is [email protected]
    For other carriers, see
    http://en.wikipedia.org/wiki/Listof_carriers_providing_SMStransit
    So if your cell carrier is ATT Wireless and your cell number is 987-654-3210, you would set up the e-mail forwarding address as [email protected]
    With regard to automatic forwarding of incoming e-mails, I don't normally use Mail.app, but its help section contains the following:
    To automatically forward messages:
    Choose Mail > Preferences, and then click Rules.
    Click Add Rule and type a descriptive name for the rule.
    Set the conditions necessary for the rule to apply to a message.
    Choose Forward Message from the “Perform the following actions” pop-up menu.
    Enter the email address where you want the messages forwarded.
    Click Message and enter the text you want to appear, along with the text of the original message, in the forwarded message.
    ---------

  • HT3529 I am currently in India and am able to send imessage to a US number but not able to send imessage to India cell phone number

    Can soome one please help answer above question

    I have another user with me we both are in India and re able to send an imessage to a US number but not send imessage to each other. So the problem remains unsolved.

  • I am not able to send emails from my i phone

    - I can receive them  My servers are correct  any suggestions?

    I have the same configuration in my N73 and it works on Vodafone. I think this is a network problem.
    you might also want to check out Profmail- IMAP is much better. The built in application only alows you to see the header whereas Profmail allows you to get the first few lines at the same sync. This is very useful if you often get mail with attachements (like me) The built in applicaiton is rather limited- pity!
    Nokia 5800 v21.0.025 RM-356 (Orange profile- when will they update??)
    Nokia N73 (RM-133, OS v4.0735.3.0.2)
    Nokia N85- DONT BUY, front plate fell off day 3, back panel moves. VERY cheap construction.

Maybe you are looking for

  • NW 6.5 sp8 abends

    I have been experiencing the following abend the past several evenings. The server had been operating without problems for many, many months. Now all of a sudden I am getting these abends. Any help is appreciated. Novell Open Enterprise Server, NetWa

  • How To Enable a List Box To accept  Multiple Selection

    Dear all, How can I enable a List box to accept multiple selection.If any body can please help me. Thanks a bunch in advance Regards Rakesh

  • Videos stop playing one third through and will not restart.

    I have uninstalled and reinstalled to no avail. Computer is a Toshiba laptop running Windows Vista. Any help much appreciated.

  • Sun Enterprise Server 8 - Web application error

    If you can help, I can be satisfied. When I try to deploy a .war file I always get this error in the following. <-- A "com.sun.enterprise.tools.guiframework.exception.FrameworkException" was caught. The message from the exception: "java.lang.reflect.

  • 2 swfs "talking"

    hello. i searched around for an answer on the forum but i saw no answer quite as a i need... :( here's the idea: i have a normal html file with 2 swfs. one is the menu the other one is there to load other movies. all in one movie is easy... but here,