Send pdf (Adobe Form) as email attachment using BCS

Hello everybody!
I want to send a pdf, generated by Adobe Forms function module, as an email attachment to a certain external mail receiver. I have read that the methods of the Business Communication Services can render this, but I couldn't create a working solution. Can somebody give me a coding example for this scenario?
I would be very happy if somebody could help me!
Best regards,
Markus

Hello Alex!
your link to this document was very helpful. The scenario described in the pdf is almost what I was looking for. The only problem is, that the mail is sent to the Business Workplace Inbox. I want to send it to an external e-mail address. When I change the programm part where the recipient is defined like this:
Create recipient
DATA lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
DATA l_reci    TYPE adr6-smtp_addr VALUE 'somemailaddress'.
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_reci ).
Set sender
lo_send_request->add_recipient(
    EXPORTING
      i_recipient = lo_recipient ).
then no mail is sent to the recipients mailbox. I tried several variants but no mail is sent. Does somebody know how to set an external e-mail as recipient in this case?
Best regards!
Markus

Similar Messages

Send Adobe form as email attachment

Hello Experts,
Recently iu2019m facing a problem regarding Adobe form PDF attachment and sending an e-mail along with the PDF attachment to customer mail id.But when i execute the RFC Function module, in customer side no mail is comming. And when i check the transaction SBWP then i found that the PDF attachment hold only 1KB of data which is not right.For that iu2019m sending my code which i was declared in my program.Can anybody Please help me to overcome this problem?
FORM print_form USING p_disp       TYPE char1
                      drb_mail     TYPE char1
                     p_email LIKE itcpo-tdcovtitle
                     p_email1 LIKE itcpo-tdcovtitle.
DATA ds_recipient TYPE   swotobjid.
CLEAR: dg_funcnam, dg_outputparams.
*--Call generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name     = c_form
    IMPORTING
      e_funcname = dg_funcnam.
dg_outputparams-nodialog = 'X'.
dg_outputparams-getpdf   = 'X'.
Job Open for PDF
CALL FUNCTION 'FPCOMP_JOB_OPEN'
CHANGING
    ie_outpar      = dg_outputparams
EXCEPTIONS
    cancel         = 1
    usage_error    = 2
    system_error   = 3
    internal_error = 4
    OTHERS         = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
dg_docparams-langu = 'X'.
dg_docparams-country = 'US'.
dg_docparams-fillable = 'X'.
form CONVERT_PDF_BINARY .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER                = FP_FORMOUTPUT-PDF
APPEND_TO_TABLE         = ' '
IMPORTING
OUTPUT_LENGTH         =
    TABLES
      BINARY_TAB            = t_att_content_hex .
endform.                    " CONVERT_PDF_BINARY
*&      Form MAIL_ATTACHMENT
      text
--> p1        text
<-- p2        text
form MAIL_ATTACHMENT USING p_email LIKE itcpo-tdcovtitle
                    p_email1 LIKE itcpo-tdcovtitle.
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body. lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Personnel Information Form' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL. TRY.
      lo_document->add_attachment(
      EXPORTING
      i_attachment_type = 'PDF'
      i_attachment_subject = 'Personnel Information Form'
I_ATTACHMENT_SIZE =
I_ATTACHMENT_LANGUAGE = SPACE
I_ATT_CONTENT_TEXT =
I_ATTACHMENT_HEADER =
      i_att_content_hex = t_att_content_hex ).
    CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment
Pass the document to send request
lo_send_request->set_document( lo_document )."* Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value ' here mail id '.
l_send = P_email.
l_send = P_email1.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender )." Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).* Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'The Personnel Information form has been emailed to the Employee' type 'I'.
endform.                    " MAIL_ATTACHMENT
*--Call Function module
CALL FUNCTION dg_funcnam
EXPORTING
    /1bcdwb/docparams = dg_docparams
    im_logo         = dg_logo
    im_user_address = dt_user_address
    im_ship_to_addr = dt_imp_data
    im_text         = ds_text
    im_sales_text   = dt_sales_text
    im_item_data    = dt_item_data
IMPORTING
    /1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
EXCEPTIONS
    usage_error     = 1
    system_error    = 2
    internal_error = 3
    OTHERS          = 4.
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION 'FPCOMP_JOB_CLOSE'
IMPORTING
    e_jobresult    = l_result
EXCEPTIONS
    usage_error    = 1
    system_error   = 2
    internal_error = 3
    OTHERS         = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA : dl_msg TYPE string.
CONCATENATE 'Successfully mailed to' p_email p_email1 INTO dl_msg SEPARATED BY space.
IF drb_mail = 'X'.
   COMMIT WORK.
   MESSAGE dl_msg TYPE 'I' .
   MESSAGE i000 WITH 'Successfully mailed to' p_email1.
ENDIF.
ENDFORM.                    "print_form
Could you please any body help me, it's very uregent issue.
Regards
Sandeep

*& Report ZGB_ATTACHMENT
REPORT zgb_attachment.
DATA:
l_formname        TYPE fpname VALUE 'ZGB_ATTACHMENT',
l_fm_name         TYPE rs38l_fnam,
fp_outputparams   TYPE sfpoutputparams,
fp_docparams      TYPE sfpdocparams,
fp_formoutput     TYPE fpformoutput.
DATA:
t_att_content_hex TYPE solix_tab.
PARAMETERS: p_pernr TYPE persno.
START-OF-SELECTION.
PERFORM get_function_module.
PERFORM create_document.
PERFORM convert_pdf_to_binary.
PERFORM mail_attachment.
*&      Form GET_FUNCTION_MODULE
*       text
* --> p1        text
* <-- p2        text
FORM get_function_module .
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name              = l_formname
    IMPORTING
      e_funcname          = l_fm_name
*     E_INTERFACE_TYPE    =
*     EV_FUNCNAME_INBOUND =
ENDFORM.                    " GET_FUNCTION_MODULE
*&      Form CREATE_DOCUMENT
*       text
* --> p1        text
* <-- p2        text
FORM create_document .
*JOB OPEN
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = fp_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      OTHERS          = 5.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
fp_docparams-langu = 'X'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
CALL FUNCTION l_fm_name
    EXPORTING
     /1bcdwb/docparams        = fp_docparams
      pernr                    = p_pernr
   IMPORTING
     /1bcdwb/formoutput       = fp_formoutput
* EXCEPTIONS
*   USAGE_ERROR              = 1
*   SYSTEM_ERROR             = 2
*   INTERNAL_ERROR           = 3
*   OTHERS                   = 4
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
*JOB CLOSE
CALL FUNCTION 'FP_JOB_CLOSE'
*    IMPORTING
*      e_result       =
    EXCEPTIONS
      usage_error    = 1
      system_error   = 2
      internal_error = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDFORM.                    " CREATE_DOCUMENT
*&      Form CONVERT_PDF_TO_BINARY
*       text
* --> p1        text
* <-- p2        text
FORM convert_pdf_to_binary .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      buffer                = fp_formoutput-pdf
*   APPEND_TO_TABLE       = ' '
* IMPORTING
*   OUTPUT_LENGTH         =
    TABLES
      binary_tab            = t_att_content_hex
ENDFORM.                    " CONVERT_PDF_TO_BINARY
*&      Form MAIL_ATTACHMENT
FORM mail_attachment .
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
* Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Personnel Information Form' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
      lo_document->add_attachment(
      EXPORTING
      i_attachment_type = 'PDF'
      i_attachment_subject = 'Personnel Information Form'
* I_ATTACHMENT_SIZE =
* I_ATTACHMENT_LANGUAGE = SPACE
* I_ATT_CONTENT_TEXT =
* I_ATTACHMENT_HEADER =
      i_att_content_hex = t_att_content_hex ).
    CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
* Add attachment
* Pass the document to send request
lo_send_request->set_document( lo_document ).
* Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send TYPE adr6-smtp_addr VALUE '[email protected]'.
* lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).
* Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
* Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
* lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).
** Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
* lo_send_request->add_recipient(
* EXPORTING
* i_recipient = lo_recipient
* i_express = 'X' ).
* Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
MESSAGE 'The Personnel Information form has been emailed to the Employee' TYPE 'I'.
ENDFORM.                    " MAIL_ATTACHMENT

Send PO Adobe form as email using BBP_PO_ACTION_DEF

Hello SRM Guru's
I need to send my PO adobe form as an EMail....So please guid me ...how to setup the configuration using T-code BBP_PO_ACTION_DEF .
Thanks and Regards...
Priyank Dixit

Hi Priyank,
Within the Action Profile BUS2201 you need to configure a new processing type: 'External Communcation'. Within this processing type you can configure your adobe form settings and linkaging
Form name: 'BBP_PO_ADB_NL' (standard adobe form, view/create adobe forms via txn SFP)
Form type: 'PDF-Based Forms'
Format: BBP_PO_ADB_MAIL
Personalization type: Recipient-Specific Variable Replacement
We have configured output rules via txn BBP_PO_ACTION_CONF. Setting the 'external communication' processing type as the processing type for vendor output type 'mail' (changing the default 'Smart Forms Mail').
Note: You require SAP Archivelink for archiving purposes, without it you can/should not activate archiving.
Kind regards,
Tim

Adobe Form print/email - Attach IXOS .tif images via string table param?

I am attempting to create an Adobe Form print/e-mail output for Invoices, with zero, one or many attached pages from the IXOS archive. (TIFF files.) So far I have managed to attach exactly one IXOS image. Now I need to make the number of attached images dynamic.
This is in Netweaver 7.0 / ECC 6.0 ehp 3 / LiveCycle Designer 8.1.
My ABAP driver program is a copy of SD_INVOICE_PRINT01. In pseudocode, I've added:
Logic to identify correct IXOS image.
Logic to extract IXOS image to application server's file system.
OPEN DATASET image.tif FOR INPUT IN BINARY MODE.
READ DATASET image.tif INTO xstring.
CALL FUNCTION 'SSFC_BASE64_ENCODE' EXPORTING xstring IMPORTING string.
APPEND string TO string_table.
CALL FUNCTION form_name EXPORTING attachments = string_table.
The form interface is a copy of INVOICE_INTERFACE (ABAP dictionary-based.) I've added import param. ATTACHMENTS type STRING_TABLE.
In the form's context tab, interface import param. ATTACHMENTS was dragged & dropped onto the context pane, yielding:
- Table ATTACHMENTS
-- Structure DATA
--- Field ITEM.
In Adobe LiveCycle Designer 8.1, I *can* create an image field with binding ATTACHMENTS.DATA[1].ITEM - that prints the TIFF from IXOS just fine.
What *does not* work is placing ATTACHMENTS on the form as a table of image fields. I've tried several combinations - most look like this:
- Table or Subform ATTACHMENTS, binding ATTACHMENTS, repeat for each data item max = 1.
-- Row or Subform DATA, binding DATA[*], repeat for each data item min = 1.
--- Image field ITEM, binding ITEM.
The result is consistently one blank page. No more, no less.
Can anyone help?
Edited by: Eric Hopp on May 12, 2010 12:09 AM

Hello,
I have no experience regarding the table of pictures, but you could try a workaround if you don´t insist of displaying the images. You could attach the pictures as attachments (you know, the little attachments icon on the left in your Reader). The ABAP coding for this can be found in SE38 FP_* and when you check the descriptions you should be able to find the one working with the attachments.
Would be better than nothing I guess,
Otto

Sending Adobe forms through Email and Fax

Hi ,
I have created an Adobe Form i.e. PO Form,
whose print/driver program is customised / based on SAPFM06P and routine used is ADOBE_ENTRY_NEU.
So , now I use the transaction ME22N and use the External Send option i.e sending Email , but the Email is getting sent to Spool instead of SOST.
So what changes do I need to make .
Can anyone tell me how do we send an Adobe Form through email * in which routine is based on Adobe_entry_neu .
Thanks in advance,
Rohit

Hi,
Thanks for reply
The link u mentioned utilises Objects.. but can we send internet mail using this?
As we cannot change RECIPIENT TYPE in this case in the object.
I used this format in the program but the attachment is going to EXpress inbox. and goes to my SAP Inbox instead of Email .
So what changes we need to do for this.
Alternatively, can we use FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' for this purpose?
Edited by: Rohit Pareek on Feb 3, 2009 3:36 PM

Adobe form Through Email

Hello Gurus,
My requirement is to send the Adobe form via Email as attachment.
Am using FM "FP_JOB_OPEN", Generated Adobe Form FM and FP_JOB_CLOSE.
Here, am getting PDF format in "FPFORMOUTPUT-PDF".
As "FPFORMOUTPUT-PDF" is in format of xstring, We need to convert it to Binary and for this am using FM "SCMS_XSTRING_TO_BINARY".
Code:
data: li_att_content_hex type standard table of x.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
BUFFER = FPFORMOUTPUT-pdf
TABLES
BINARY_TAB = li_att_content_hex.
Later, am using the FM "SO_NEW_DOCUMENT_ATT_SEND_API1" to send a mail.
As a result am getting the mail with attachment as PDF but when I try to open the attachment it gives me an error as "It wasn't correctly decoded".
Please, Let me know about this issue.
Thanks in advance.
Regards,
Usha

hi,
Refer to this link..
Re: Attachment in ADOBE form

Adobe Form as an attachment

Hi,
We are having a requirement where I need to send the adobe form as an attachment in email. The existingform can be displayed by a URL in a browser. Now I have following queries:
Can we convert this URL based form into PDF document and send the same document as an attachment in a email? For email, we are using standard RFC.
Regards
Abhinav Sharma

if you create your pdf (in abap) you have to call function module FP_JOB_OPEN. There in the interface structure "outputparams" set parameter "getpdf" to 'X' (abap_true).
Then there will be the pdf data in the output structure of the generated funstion module "formoutput" in the variable "pdf".
Use class "cl_bcs" to send mails....
norbert

Send ADOBE FORM as email

hi all,
Does anybody knows what all parameters to be passed to FM 'FP_JOB_OPEN' to send the adobe form as an email .

Jay,
Have a look at this [thread|Re: Sending PDF forms (created using SFP) as Email Attachment;
Chintan

Offline Integration of Adobe Forms with CRM System using Web Service

Hi Experts,
I have a business requirement in which the end user us given an Application Form.
The user can save the form locally and fill the data.
Now the requirement is that when the end user clicks on Submit Button on the form, a web service is called and the entire data in the form is sent to CRM System.
I want to know is it possible to capture the entire data filled in the form in a web service???
Also the other major requirement is that i need to send the application form also to the CRM system.
I need to store the form as attachement for a Business Partner Record.
Is it possible to capture the data in the adobe form and still attach the form as attachement in an Offline Scenario????
Is it possible that a Web Service can be called on click of button in the form and still be able to attach the form itself as attachment???
Thanks and Regards
Gaurav Kumar Raghav

I have collected some links for WebServices for you:
https://cw.sdn.sap.com/cw/servlet/JiveServlet/download/38-51084/saptech_webservice.pdf
Re: Adobe forms with Web Service - nothing happens when clicking button.
/people/rudy.clement2/blog/2010/03/10/how-to-use-the-postexecute-event-in-sap-interactive-forms-to-retrieve-a-table-from-a-webservice
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/148ec26e-0c01-0010-e488-decaafae3b26
Usage of webservice in offline adobe scenarios
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0d0a250-ccd1-2c10-9e9f-b9d5cf259a6d?quicklink=index&overridelayout=true
cheers Otto

Is there a way to send a message with a photo attached using imessages. I am not able to send a photo to one of my contacts because I am sending the contact a message text messages. I don't want to send contacts text messages. I want to send them iMe

Is there a way to send a message with a photo attached using imessages. I am not able to send a photo to one of my contacts because I am sending the contact a message text messages. I don't want to send contacts text messages. I want to send them iMessages.

Kolyei, sorry for the late reply.
Have your brother create a contact in his phone for himself. Inside his own contact, have him add his phone number and his iCloud address.
Settings > Messages > Send & Receive Have your brother select both his phone number and email addresses where he would like to receive iMessages.

Sending km document as an email attachment

Hi all,
I am trying to send a KM document as email attachment with the following peice of code. But I am getting FileNotFoundExceptio. Can anyone guide me as to where its going wrong. Any help will be appreciated.
String filePath = "";
ResourceContext ctx = new ResourceContext(getEP5User());
RID rid = RID.getRID("/documents/LRForms/0000000054.pdf");
IResource pdfResource =ResourceFactory.getInstance().getResource(rid, ctx);
filePath =
"irj\servlet\prt\portal\prtroot\com.sap.km.cm.docs\"
+ pdfResource.getRID().toString();
Properties props = new Properties();
props.put("mail.smtp.host", host);
Session session = Session.getInstance(props, null);
MimeMessage message = new MimeMessage(session);
Address toAddress;
Address fromAddress;
Address ccAddress;
Address bccAddress = new InternetAddress();
MimeMultipart multipart = new MimeMultipart();
BodyPart messageBodyPart = new MimeBodyPart();
fromAddress = new InternetAddress("[email protected]");
message.setFrom(fromAddress);
toAddress = new InternetAddress("[email protected]");
message.setRecipient(Message.RecipientType.TO, toAddress);
message.setSubject("Subject");
messageBodyPart.setText("Please find attached the details.");
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource(filePath);
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName(source.getName());
messageBodyPart.setHeader("Content-Type", "application/pdf");
multipart.addBodyPart(messageBodyPart);
message.setContent(multipart);
Transport.send(message);
On executing this code I am getting following exception.
MessagingException javax.mail.SendFailedException: Sending failed; nested exception is: javax.mail.MessagingException: IOException while sending message; nested exception is: java.io.FileNotFoundException
Thanks and regards,
Jaydeep

Hi,
Did you check permissions/security zone settings on the folder/file?
Can you access the file directly from the browser?
Regards,
Omri

Cant open a pdf file as an email attachment

I need help. I can't open a pdf file as an email attachment. It's like my computer doesn't think reader is installed. I can open an existing file through reader. I have deinstalled and reinstalled reader and am getting the same results.

You can save the attachment and then open it.
We can try to help but you haven't mentioned what you are using for your email...

VERY URGENT - Adobe forms with email problems

I THERE - I AM A ADOBE FORMCENTRAL CLIENT I HAVE MY PAYEMENTS ON DAY BUT FOR SOME REASON THE ADOBE STOP RESENDING TO MY EMAUIL ACOUNT AND TO MY CLIENTS EMAIL ACCOUNT THE SUMARY OF THE FORM THAT IS SUBMITED. THIS IS VERY URGENT THAT BE FIXED FROM YOU SIDE PLS LET ME KNOW WHAT IS HAPENING.
PLS FIX THIS URGENT AS I HAVE MY CLIENTS SCREEMING ON ME
PLS ANSWER TO
[email protected]

Now is working
after 2 hours is working now. but this have never hapen before. now I am
woried with this ADOBE FORM system!!!! it can hapen and I never know.
br
henrique
2014-04-25 21:29 GMT+01:00 Josh_Corey <[email protected]>:
Re: VERY URGENT - Adobe forms with email problems
created by Josh_Corey <http://forums.adobe.com/people/Josh_Corey> in
FormsCentral - View the full discussion<http://forums.adobe.com/message/6331228#6331228

Unable send ADOBE form through email as attachment

Hello experts,
I was trying the [tutorial |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed] on ADOBE interactive form through GP.
I am not able to send a form as an attachment as specifies in the document.
I have checked for all the required settings mentioned in the document and all seems to be ok.
Can anyone please provide a ray of help on how do I enable a ADOBE form to be passed as an attachment through email.
Thank you.
Ashutosh

Hi,
just use a "Standard button", select it and go to the "Object" -> "Field" tab. Set the control type to "Submit". Go to the "Submit" tab. Set the submit format (e.g. PDF) and set the URL to "mailto:<receiver's email address>".
This will work fine without any JavaScript.
Take care,
Thomas

Problem in sending online interactive form in email as PDF attachment

Hi,
I am trying to send online intercative forms as PDF attachment once user fills it and click on send button. But this mail i am trying to send from SAP workflow. For this am using one function module which is accepting the pdfsource context attribute of binary type as Xstring. Once i run the webdynpro application i am getting mail in out look but when i open the attachment i am getting error file is damaged.
Can you pls help me in solving this, Or any other way for doing the same.
Here is the code i am using for triggering the RFC from WD
Zsend_Mail_Attachment_Sev_Input mail = new Zsend_Mail_Attachment_Sev_Input();
          //to capture the outplacement level entered in the form
          mail.setI_Out_Place_Level(wdContext.currentVn_severancedetailsElement().getVa_outplacement_level().getBytes());
     mail.setI_Bin_Data(wdContext.currentContextElement().getPdfSource());
     wdContext.nodeZsend_Mail_Attachment_Sev_Input().bind(mail);
     try
          wdContext.currentZsend_Mail_Attachment_Sev_InputElement().modelObject().execute();
          wdComponentAPI.getMessageManager().reportSuccess("Notification Sent Successfully.");
     catch (WDDynamicRFCExecuteException e)
          // TODO Auto-generated catch block
          wdComponentAPI.getMessageManager().reportSuccess(" This is inside the mail exception!!"+e);
          e.printStackTrace();
Here is the function module code
FUNCTION ZSEND_MAIL_ATTACHMENT_SEV.
""Local Interface:
*" IMPORTING
*"     VALUE(I_OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(I_BIN_DATA) TYPE XSTRING OPTIONAL
*" TABLES
*"      T_V_BIN_DATA STRUCTURE SOLISTI1
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
        gd_sent_all(1) TYPE c,
        gd_error TYPE sy-subrc,
        tab_lines LIKE sy-tabix,
        v_subject(255) VALUE 'HI'.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
DESCRIBE TABLE it_message LINES tab_lines.
READ TABLE it_message INDEX tab_lines.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLIX OCCURS 0 WITH HEADER LINE.
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
DATA :   gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
move i_bin_data to t_v_bin_data.
********Add By Anuj
APPEND t_v_bin_data.
********End Add By Anuj
LOOP AT t_v_bin_data.
    MOVE t_v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Appending The Internal Table it_receivers
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver to it_receiver.
append it_receiver.
Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
*Function Module To Post The Message To Externa Mail
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = gd_doc_data
        put_in_outbox              = 'X'
        commit_work                = 'X'
      TABLES
        packing_list               = it_packing_list
        contents_hex               = objbin
        receivers                  = it_receivers
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
    clear wa_receiver.
   endloop.
elseif i_OUT_PLACE_LEVEL eq 0.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = gd_doc_data
        put_in_outbox              = 'X'
        commit_work                = 'X'
      TABLES
        packing_list               = it_packing_list
        contents_hex               = objbin
        receivers                  = it_receiver
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
    clear wa_receiver.
endif.
ENDFUNCTION.
Regards
Ravindra

Hi,
I am trying to send online intercative forms as PDF attachment once user fills it and click on send button. But this mail i am trying to send from SAP workflow. For this am using one function module which is accepting the pdfsource context attribute of binary type as Xstring. Once i run the webdynpro application i am getting mail in out look but when i open the attachment i am getting error file is damaged.
Can you pls help me in solving this, Or any other way for doing the same.
Here is the code i am using for triggering the RFC from WD
Zsend_Mail_Attachment_Sev_Input mail = new Zsend_Mail_Attachment_Sev_Input();
          //to capture the outplacement level entered in the form
          mail.setI_Out_Place_Level(wdContext.currentVn_severancedetailsElement().getVa_outplacement_level().getBytes());
     mail.setI_Bin_Data(wdContext.currentContextElement().getPdfSource());
     wdContext.nodeZsend_Mail_Attachment_Sev_Input().bind(mail);
     try
          wdContext.currentZsend_Mail_Attachment_Sev_InputElement().modelObject().execute();
          wdComponentAPI.getMessageManager().reportSuccess("Notification Sent Successfully.");
     catch (WDDynamicRFCExecuteException e)
          // TODO Auto-generated catch block
          wdComponentAPI.getMessageManager().reportSuccess(" This is inside the mail exception!!"+e);
          e.printStackTrace();
Here is the function module code
FUNCTION ZSEND_MAIL_ATTACHMENT_SEV.
""Local Interface:
*" IMPORTING
*"     VALUE(I_OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(I_BIN_DATA) TYPE XSTRING OPTIONAL
*" TABLES
*"      T_V_BIN_DATA STRUCTURE SOLISTI1
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
        gd_sent_all(1) TYPE c,
        gd_error TYPE sy-subrc,
        tab_lines LIKE sy-tabix,
        v_subject(255) VALUE 'HI'.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
DESCRIBE TABLE it_message LINES tab_lines.
READ TABLE it_message INDEX tab_lines.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLIX OCCURS 0 WITH HEADER LINE.
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
DATA :   gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
move i_bin_data to t_v_bin_data.
********Add By Anuj
APPEND t_v_bin_data.
********End Add By Anuj
LOOP AT t_v_bin_data.
    MOVE t_v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Appending The Internal Table it_receivers
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
wa_receiver-receiver = '[email protected]'.
wa_receiver-rec_type = 'U'.
wa_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver to it_receiver.
append it_receiver.
Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
*Function Module To Post The Message To Externa Mail
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = gd_doc_data
        put_in_outbox              = 'X'
        commit_work                = 'X'
      TABLES
        packing_list               = it_packing_list
        contents_hex               = objbin
        receivers                  = it_receivers
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
    clear wa_receiver.
   endloop.
elseif i_OUT_PLACE_LEVEL eq 0.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = gd_doc_data
        put_in_outbox              = 'X'
        commit_work                = 'X'
      TABLES
        packing_list               = it_packing_list
        contents_hex               = objbin
        receivers                  = it_receiver
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
    clear wa_receiver.
endif.
ENDFUNCTION.
Regards
Ravindra

Send pdf (Adobe Form) as email attachment using BCS

Similar Messages

Maybe you are looking for