Sending Adobe forms through Email and Fax
Hi ,
I have created an Adobe Form i.e. PO Form,
whose print/driver program is customised / based on SAPFM06P and routine used is ADOBE_ENTRY_NEU.
So , now I use the transaction ME22N and use the External Send option i.e sending Email , but the Email is getting sent to Spool instead of SOST.
So what changes do I need to make .
Can anyone tell me how do we send an Adobe Form through email * in which routine is based on Adobe_entry_neu .
Thanks in advance,
Rohit
Hi,
Thanks for reply
The link u mentioned utilises Objects.. but can we send internet mail using this?
As we cannot change RECIPIENT TYPE in this case in the object.
I used this format in the program but the attachment is going to EXpress inbox. and goes to my SAP Inbox instead of Email .
So what changes we need to do for this.
Alternatively, can we use FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' for this purpose?
Edited by: Rohit Pareek on Feb 3, 2009 3:36 PM
Similar Messages
-
To send smartform output through email and fax
Hi,
I need to send smartform output through email if the email address is present else if the email address is present then it has to be sent through fax.If both the email address and fax are present,then it has to send an email.
Now the issue is I am able to send the email and I am getting the message as 'Output was successfully issued'.But the entry corresponding to this is not shown in SOST transaction.
Can anyone tell me what would be the reason for this?HI,
Try to look in transaction SCOT
Regards,
Egle -
Unable send ADOBE form through email as attachment
Hello experts,
I was trying the [tutorial |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed] on ADOBE interactive form through GP.
I am not able to send a form as an attachment as specifies in the document.
I have checked for all the required settings mentioned in the document and all seems to be ok.
Can anyone please provide a ray of help on how do I enable a ADOBE form to be passed as an attachment through email.
Thank you.
AshutoshHi,
just use a "Standard button", select it and go to the "Object" -> "Field" tab. Set the control type to "Submit". Go to the "Submit" tab. Set the submit format (e.g. PDF) and set the URL to "mailto:<receiver's email address>".
This will work fine without any JavaScript.
Take care,
Thomas -
Hello Gurus,
My requirement is to send the Adobe form via Email as attachment.
Am using FM "FP_JOB_OPEN", Generated Adobe Form FM and FP_JOB_CLOSE.
Here, am getting PDF format in "FPFORMOUTPUT-PDF".
As "FPFORMOUTPUT-PDF" is in format of xstring, We need to convert it to Binary and for this am using FM "SCMS_XSTRING_TO_BINARY".
Code:
data: li_att_content_hex type standard table of x.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
BUFFER = FPFORMOUTPUT-pdf
TABLES
BINARY_TAB = li_att_content_hex.
Later, am using the FM "SO_NEW_DOCUMENT_ATT_SEND_API1" to send a mail.
As a result am getting the mail with attachment as PDF but when I try to open the attachment it gives me an error as "It wasn't correctly decoded".
Please, Let me know about this issue.
Thanks in advance.
Regards,
Ushahi,
Refer to this link..
Re: Attachment in ADOBE form -
Send Adobe form as email attachment
Hello Experts,
Recently iu2019m facing a problem regarding Adobe form PDF attachment and sending an e-mail along with the PDF attachment to customer mail id.But when i execute the RFC Function module, in customer side no mail is comming. And when i check the transaction SBWP then i found that the PDF attachment hold only 1KB of data which is not right.For that iu2019m sending my code which i was declared in my program.Can anybody Please help me to overcome this problem?
FORM print_form USING p_disp TYPE char1
drb_mail TYPE char1
p_email LIKE itcpo-tdcovtitle
p_email1 LIKE itcpo-tdcovtitle.
DATA ds_recipient TYPE swotobjid.
CLEAR: dg_funcnam, dg_outputparams.
*--Call generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = c_form
IMPORTING
e_funcname = dg_funcnam.
dg_outputparams-nodialog = 'X'.
dg_outputparams-getpdf = 'X'.
Job Open for PDF
CALL FUNCTION 'FPCOMP_JOB_OPEN'
CHANGING
ie_outpar = dg_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
dg_docparams-langu = 'X'.
dg_docparams-country = 'US'.
dg_docparams-fillable = 'X'.
form CONVERT_PDF_BINARY .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
BUFFER = FP_FORMOUTPUT-PDF
APPEND_TO_TABLE = ' '
IMPORTING
OUTPUT_LENGTH =
TABLES
BINARY_TAB = t_att_content_hex .
endform. " CONVERT_PDF_BINARY
*& Form MAIL_ATTACHMENT
text
--> p1 text
<-- p2 text
form MAIL_ATTACHMENT USING p_email LIKE itcpo-tdcovtitle
p_email1 LIKE itcpo-tdcovtitle.
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body. lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Personnel Information Form' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL. TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'Personnel Information Form'
I_ATTACHMENT_SIZE =
I_ATTACHMENT_LANGUAGE = SPACE
I_ATT_CONTENT_TEXT =
I_ATTACHMENT_HEADER =
i_att_content_hex = t_att_content_hex ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment
Pass the document to send request
lo_send_request->set_document( lo_document )."* Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value ' here mail id '.
l_send = P_email.
l_send = P_email1.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender )." Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).* Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'The Personnel Information form has been emailed to the Employee' type 'I'.
endform. " MAIL_ATTACHMENT
*--Call Function module
CALL FUNCTION dg_funcnam
EXPORTING
/1bcdwb/docparams = dg_docparams
im_logo = dg_logo
im_user_address = dt_user_address
im_ship_to_addr = dt_imp_data
im_text = ds_text
im_sales_text = dt_sales_text
im_item_data = dt_item_data
IMPORTING
/1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION 'FPCOMP_JOB_CLOSE'
IMPORTING
e_jobresult = l_result
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA : dl_msg TYPE string.
CONCATENATE 'Successfully mailed to' p_email p_email1 INTO dl_msg SEPARATED BY space.
IF drb_mail = 'X'.
COMMIT WORK.
MESSAGE dl_msg TYPE 'I' .
MESSAGE i000 WITH 'Successfully mailed to' p_email1.
ENDIF.
ENDFORM. "print_form
Could you please any body help me, it's very uregent issue.
Regards
Sandeep*& Report ZGB_ATTACHMENT
REPORT zgb_attachment.
DATA:
l_formname TYPE fpname VALUE 'ZGB_ATTACHMENT',
l_fm_name TYPE rs38l_fnam,
fp_outputparams TYPE sfpoutputparams,
fp_docparams TYPE sfpdocparams,
fp_formoutput TYPE fpformoutput.
DATA:
t_att_content_hex TYPE solix_tab.
PARAMETERS: p_pernr TYPE persno.
START-OF-SELECTION.
PERFORM get_function_module.
PERFORM create_document.
PERFORM convert_pdf_to_binary.
PERFORM mail_attachment.
*& Form GET_FUNCTION_MODULE
* text
* --> p1 text
* <-- p2 text
FORM get_function_module .
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = l_formname
IMPORTING
e_funcname = l_fm_name
* E_INTERFACE_TYPE =
* EV_FUNCNAME_INBOUND =
ENDFORM. " GET_FUNCTION_MODULE
*& Form CREATE_DOCUMENT
* text
* --> p1 text
* <-- p2 text
FORM create_document .
*JOB OPEN
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
fp_docparams-langu = 'X'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
CALL FUNCTION l_fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
pernr = p_pernr
IMPORTING
/1bcdwb/formoutput = fp_formoutput
* EXCEPTIONS
* USAGE_ERROR = 1
* SYSTEM_ERROR = 2
* INTERNAL_ERROR = 3
* OTHERS = 4
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
*JOB CLOSE
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* e_result =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDFORM. " CREATE_DOCUMENT
*& Form CONVERT_PDF_TO_BINARY
* text
* --> p1 text
* <-- p2 text
FORM convert_pdf_to_binary .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = fp_formoutput-pdf
* APPEND_TO_TABLE = ' '
* IMPORTING
* OUTPUT_LENGTH =
TABLES
binary_tab = t_att_content_hex
ENDFORM. " CONVERT_PDF_TO_BINARY
*& Form MAIL_ATTACHMENT
FORM mail_attachment .
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
* Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Personnel Information Form' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'Personnel Information Form'
* I_ATTACHMENT_SIZE =
* I_ATTACHMENT_LANGUAGE = SPACE
* I_ATT_CONTENT_TEXT =
* I_ATTACHMENT_HEADER =
i_att_content_hex = t_att_content_hex ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
* Add attachment
* Pass the document to send request
lo_send_request->set_document( lo_document ).
* Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send TYPE adr6-smtp_addr VALUE '[email protected]'.
* lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).
* Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
* Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
* lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).
** Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
* lo_send_request->add_recipient(
* EXPORTING
* i_recipient = lo_recipient
* i_express = 'X' ).
* Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
MESSAGE 'The Personnel Information form has been emailed to the Employee' TYPE 'I'.
ENDFORM. " MAIL_ATTACHMENT -
Sending sapscript form through Email
Hi,
I modifyed a std sapscript form for customer statement and that output i want to send to the customer through Email.So now i need a help for further what are the steps need to be do for sending that form by email.Pls be in details so that for me easy to solve this.
Thanks,
Rajendra.Hi ,
I am using the below code to send the form output by mail but it is not working for me.pls correct my code where i want to change so that i can solve my issues.
DATA: itcpo LIKE itcpo,
tab_lines LIKE sy-tabix.
Variables for EMAIL functionality
DATA: maildata LIKE sodocchgi1.
DATA: mailpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: mailhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: mailbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailrec LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: solisti1 LIKE solisti1 OCCURS 0 WITH HEADER LINE.
parameter: p_email1 like somlreci1-receiver .
PERFORM send_form_via_email.
FORM SEND_FORM_VIA_EMAIL *
FORM send_form_via_email.
CLEAR: maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
mailtxt-line = 'Here is your file'.
APPEND mailtxt.
Prepare Packing List
PERFORM prepare_packing_list.
Set recipient - email address here!!!
mailrec-receiver = p_email1.
mailrec-rec_type = 'U'.
APPEND mailrec.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = maildata
put_in_outbox = ' '
TABLES
packing_list = mailpack
object_header = mailhead
contents_bin = mailbin
contents_txt = mailtxt
receivers = mailrec
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
ENDFORM.
Form PREPARE_PACKING_LIST
FORM prepare_packing_list.
CLEAR: mailpack, mailbin, mailhead.
REFRESH: mailpack, mailbin, mailhead.
DESCRIBE TABLE mailtxt LINES tab_lines.
READ TABLE mailtxt INDEX tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
CLEAR mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
APPEND mailpack.
Creation of the document attachment
This form gets the OTF code from the SAPscript form.
If you already have your OTF code, I believe that you may
be able to skip this form. just do the following code, looping thru
your SOLISTI1 and updating MAILBIN.
PERFORM get_otf_code.
LOOP AT solisti1.
MOVE-CORRESPONDING solisti1 TO mailbin.
APPEND mailbin.
ENDLOOP.
DESCRIBE TABLE mailbin LINES tab_lines.
mailhead = 'TEST.OTF'.
APPEND mailhead.
Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-obj_name = 'TEST'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
ENDFORM.
Form GET_OTF_CODE
FORM get_otf_code.
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'Z2006FICSE'
language = sy-langu
options = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'START_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
window = 'MAIN'
EXCEPTIONS
error_message = 01
OTHERS = 02.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
MOVE-CORRESPONDING itcpo TO itcpp.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
result = itcpp
TABLES
otfdata = otf
EXCEPTIONS
OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR solisti1. REFRESH solisti1.
LOOP AT otf.
solisti1-line = otf.
APPEND solisti1.
ENDLOOP.
ENDFORM.
Hope i can expect the feedback soon from you guys.
Thanks,
Rajendra. -
Can't send Notes through email and it used to work. The same problem of sending picture from iPhone message. Did the reset twice but still not working
Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
Sending error msgs through email and sms
Hi,
does anyone done on sending error msg file through email and sms.
if so share some knowledge with me.
thanks in advanceHi
MAIL:
SORT t_receivers BY receiver.
DELETE ADJACENT DUPLICATES FROM t_receivers COMPARING receiver.
IF NOT t_receivers[] IS INITIAL.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wal_docdata
put_in_outbox = c_check
TABLES
packing_list = t_objpack
contents_txt = t_content_txt
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
SMS: refer to this Weblog in SDN.
<a href="/people/durairaj.athavanraja/blog/2005/07/12/send-sms-to-india-from-abap Post for SMS prog</a>
Hope This Helps
Anirban -
Send Bid invitation to Email and Fax
Hi,
I would like to know if is it possible to send the bid invitation to the vendors via Email and Fax.
I'm looking in the PPF administration (transaction SPPFCADM) at condition configuration but i'm kidda lost....
can someone help?
Thank you,
JosephHi,
Pls see the foll related threads:
email on bid invitation publication
Email on Bid Invitation publication
Re: Bid Invitation Email Subject
Re: Bid invitation email content text modification
Re: email on creation/change of bid invitation and auction
Re: Bid invitation email content text modification
BR,
Disha.
Pls reward points for useful answers. -
Send Adobe form by email on save of PO
Hi All
I want to send PO output as abode form to vendors as soon as the PO is created and saved. I have created new output message type, new adode form for PO output. Do I have to create new program as well? So that I can put in new output type along with new form (NACE). Can any one take me through the procedure?
Thanks in advance
SunnyHi
Thanks for your reply it was helpful.
I am now able to call Adobe form in PO print preview.
But unable to send email on SAVE action of PO in ME22N. In the same output message type NEU I have added Transaciton medium as External Send. On save it is showing status as successful in Message buttion but email is not send. Can you tell me where I am wrong?
Regards
Sunny -
hi all,
Does anybody knows what all parameters to be passed to FM 'FP_JOB_OPEN' to send the adobe form as an email .Jay,
Have a look at this [thread|Re: Sending PDF forms (created using SFP) as Email Attachment;
Chintan -
Hi,
Does anyone have any idea about how a adobe form(tcode-SFP) can be sent through email and fax?
I have created an interest form and have to send it accross to the customer maintained in the customer master when i run transaction code FINT.
Help will be highly appreciated.
Regards,
Rasika
Moderator Message: There is a seperate forum for Adobe Interactive Forms. Please post your question there.
Edited by: kishan P on Nov 2, 2010 11:26 AMHi,
Thanks for reply
The link u mentioned utilises Objects.. but can we send internet mail using this?
As we cannot change RECIPIENT TYPE in this case in the object.
I used this format in the program but the attachment is going to EXpress inbox. and goes to my SAP Inbox instead of Email .
So what changes we need to do for this.
Alternatively, can we use FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' for this purpose?
Edited by: Rohit Pareek on Feb 3, 2009 3:36 PM -
Sending email by attaching adobe form through BSP
Hi All,
I'm working on the e-recruitement project.
I have requirement that on the publication page there is table view where all the publication and there posting channels are displayed.
Now i have to create a button " Send Email". by selecting the the required posting channel when i click on the button send email.
It should pick the data overview form and this form should be attached to email and should be send to the respective posting channel.
Can you please guide me to solve this issue.
Your commnets will highly appreciated.
Regards,
Nikita.Look at this [document|https://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/e0bba346-cb84-2910-2aa9-ba1f8a1c8617&overridelayout=true] to create & send adobe form via email.
You can use the same code for BSP too.
Raja -
We are moving from optio to xml publisher.
We were able to send the pdf to printer using pasta. I have no clues how to send the output to Email and Fax server.
Any pointers in that direction would be appreciated.
Thanks in advance,
SumanWe are moving from optio to xml publisher.
We were able to send the pdf to printer using pasta. I have no clues how to send the output to Email and Fax server.
Any pointers in that direction would be appreciated.
Thanks in advance,
Suman -
Sending the adobe interactive form as non-interactive form through email
Hi ,
I am trying to send the interactive adobe form as non-interactive form through email.The interactive form size is very large because of the interactivity.
Can anybody suggest how to do this.
Regards,
DebasisDear Antony,
Thanks for the reply.
I got you but can you pls guide me how to go about it.
I need to send the email while submiting the form.So when and how i will be mapping each data node /attibutes of the main form with the intermediate form.My interactive form is of 30 pages and it may grow upto 40 pages.My response is with the to the main form where i am showing the success message.
Regards,
Debasis Nayak
Maybe you are looking for
-
[solved]xorgconf command no found
I just installed the base system and trying to set up a desktop. I installed xorg but there is no xorg.conf, so I've to generate one by myself. I want to use this command: xorgconf but error shows it not exist. how can I install xorgconf? TKS P.S: I'
-
Just bought a Flip Video camera. I'm trying to take the video from the camera and import it into iMovie, but I'm getting stuck converting from QuickTime. Flip creates AVI files, which won't go into iMovie (or at least I haven't figured out how to do
-
Hi, I have an Apple Mac OS 10.4.11, dual 1.8 GHz PowerPC G5, 2.25 GB DDR SDRAM. I have Itunes 7.4. For years it has run just fine. Now when I try to open up iTunes it says the following: "The file 'ITunes Library' cannot be read because it was create
-
Exporting Folders/Albums/Pictures Structure
I recently downloaded iPhoto Buddy to help me organize my 6000+ picture and 200+ video clip iPhoto Library (well over 10GB), that takes at least 2 minutes to load, and I of course have a very large and fairly complicated directory structure. I need t
-
AYUDA! mi escaner no aparece en Image Capture
Aquí les explico el contexto: 1. Tengo un Imac con mavericks recién instalado y un HP scanjet 3800 2. Solía funcionar perfecto con Leopard y un programa llamado HP ScanJet, pero desde la actualización no funciona, el escaner funciona pero cuando quie