"Send to Color" Not appearing.

When I installed Final Cut Studio, I opted to not install Color to save space on my computer; I had no need for it at the time.
Since then, I have installed Color (I did not reinstall Final Cut Pro), but when I right click on a clip in my sequence, the option "Send to Color" does not appear. The option "Send to Motion" appears, and works. I installed Motion at the same time as Final Cut Pro.
Do I need to reinstall Final Cut Pro and Color at the same time to get this to work? Or is there another solution?

"Send to Color" appears in the browser when you have a sequence selected, not a clip in the timeline.

Similar Messages

"Send" button does not appear

When I compose a new message, the Send button does not appear in the header. It works normally when replying to another message. I can compose a new message, but all I can do is save it as a draft. The connection doctor shows everything is normal, and there have been no changes to account preferences. What is going on?
MacBook Pro Mac OS X (10.4.8)

Hello redcedar,
You must have resolved your no send button problem by now, or at least know what the problem was. I have the same problem and I can't find the answer anywhere. Any feedback would be greatly appreciated
jeydee

HT1529 how can I open the outbox for mail? That is, mail that i have finished and pressed 'send' but has not appeared in the 'sent' folder

how can I open the outbox for mail? That is, mail that i have finished and pressed 'send' but has not appeared in the 'sent' folder

The reason it will not be in the sent folder is, it failed to send.
If it failed to send, then you will see the Outbox icon. 'Pending' would be a more descriptive name.
When it eventually sends, the Outbox will not show in the Mail app interface.
Until it is sent it will stay stuck in the Outbox.
If it refuses to send, you can manually delete it in Finder, at the location ~/Library/Mail/Mailboxes/Outbox.mbox
Close Mail first, before you search for that email using the Finder.
Mail version 4.6. Mac OS version 10.6.8

Trouble with colors not appearing correctly.

This has been an ongoing problem. I have created links within my pages and assigned the links different colors to help the user determine which link it is. On some pages the colors appear correct and the next page the color links appear as black. Sometimes the entire page links are black and sometimes it is just a few. I have deleted all links and colors and started over, but no luck.
Has anyone had this issue and overcome it? What is the cause of this problem?

I believe you are referring to visited links , which by default changes on revisiting the page.
You can try the suggestion mentioned here to change back to default color on visit :
http://stackoverflow.com/questions/8188060/how-to-make-link-not-change-color-after-visited
If this is not you are referring to , then please provide page url and screenshots where you see a change in color.
Thanks,
Sanjit

Form sends but does not appear to send

Hello
I have a small problem with the online form I have. When the
site visitor sends the form (by clicking submit) the form is
received by the Webmaster, but it does not
appear to have been sent to the site visitor. That is, all
the details, name, email, etc remain in place in the online form
after the submit button has been clicked.
I am posting this here because I think the form processing
aspect of my query works fine, so I assumed this was a Flash
problem. I am using Flash MX 2004.
This the relevant part of my AS:
var serverLang:String = "asp";
var email_lv:LoadVars = new LoadVars();
email_lv.onLoad = function(success) {
if (success) {
if (email_lv.server_mes == "ok") {
status_txt.text = "Thank you, " + name_txt.text;
} else {
status_txt.text = "Sorry, your message was not sent";
submit_btn.onRelease = function() {
email_lv.sendAndLoad("fla.asp", email_lv, "POST");
Thanks.
Steve

At the moment your code is only set up to display a message
and not to blank out any input fields etc.
I presume some onChanged handlers for the input fields change
the values in email_lv or perhaps some enterFrame loop etc.
You would normally do things either in the submit_btn handler
or email_lv.onLoad handler to hide or remove the input fields.
So you would need code to do that part.
If you mean something else, for example that the
if (success) { (etc)
part of your code is not executing after the form has been
successfully processed on the server (And the message "Sorry your
message was not sent" is being shown instead)
In that case, perhaps your server script is not returning the
expected value. All you need do in that case is have the asp script
return "server_mes=ok" in the body of the response. That will give
the LoadVars a return value to work with instead of nothing and
then the (success) branch of your code should execute .

Problem while sending mail -Logo not appearing.

Hi,
The requirement is to send a message as a text and not as a PDF attachment to a recepient.
( I am converting the smartform code into HTML format - I referred to url
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp which contains the rough code ) and am sending the mail to the
recepient.
The mail is getting generated, the text of the message is getting properly formatted as desired.
But the company logo is not appearing .
I am able to see the logo when I send the mail to my employer's mail server outlook, but am unable to see
the logo when I send the mail to the customer's mail server in outlook.
Can anybody suggest what could be going wrong?
Regards,
Girish.

Hi Brad John,
Thank you for your reply.
I tried 2 methods :
1. I attached the logo to the smartform and sent the mail to my employer's mail id and
my customer's mail id.
I am able to get the logo and text in my employer's mail server but in my customer's mail server,
the text and logo are getting split into 2 attachments in the body of the mail
instead I require the text and logo in the body of the mail.
2. I removed the logo in the smartform and tried typing the url in the smartform window text as suggested in
    URL http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/2273. [original link is broken] [original link is broken] [original link is broken]
   The logo does not appear iin my employer's mail server but in my customer's mail server,
   all I get is a text of the URL.
Can you please suggest the possible reason for this problem
The url of the IMG tag is accessible externall.
What is meant by drop/reference MIME data in a location that is external to corporate firewall.
Please elaborate.
Many thanks for your time and patience.
Regards,
Girish.

"send to Color" not present

I just installed Final Cut 6. The "send to Color" is not an option from the send to section from the clip. Does anyone know why it is not present or how to fix the problem? Thank you!!

If you haven't found any bugs in it yet, you will. I just finished a two-day training session, and we all experienced instability on some level. Even the instructor had things happen that weren't supposed to. Color promises to be one of, if not the most important piece of the FCP Suite. But it's no more stable than Motion 1 was. In fact, it might even be less so. Give it time. It will come of age.
Why so many Apple users are so defensive is more of a riddle. Why the automatic "knee-capping" of anyone who uses the word "bug" or "glitch" in this forum continues to be one of life's eternal mysteries.
All software has bugs and glitches. I've never seen a perfect program. If you use an application long enough, sooner or later, something will happen that isn't supposed to.

"Send to Color" Not Working in managed clients with Open Directory

Hello,
Previously, i try to do this from a local user, with finished sequence, initiated the "send to color" command from the pop up menu, named the project, graded the footage and output the results.
However when i log with a network managed client when I click, "send to color", the dialog box comes up to name the Color project, which I do, but then when I click past that, nothing happens. Color does not open, nothing seems to be exported or "sent". Any ideas?

Same issue here. Trashed prefs, no effect

Why are my iCal custom colors not appearing on other divides

When I set custom iCal colors in the past they sync across all devices. But recently (3-4 months) any calendar I add or adjust the color on the cloud will not change on my iPad or my iPhone 5s. What is going on? I only have so many default options and I need many calendars to be differentiated from another.

It's just very hard to believe - 20+ networks! Especially the ones that are very strong that say HOME-XXXX. I am wondering a bit about those - there are 6 of them matching that naming pattern and the strength on all of them is quite good. Like I said houses are not close together in my neighborhood, at least not to me. It's not like we're talking farm country or a rural area, but the lots here are fairly large and widespread, for a suburb.
How can so many strong, similarly-named signals be appearing? I wish I could triangulate/locate the routers and know for sure where they are.

Send to Color not working

Ok guys, I have searched everywhere and I reckon I have tried everything. Basically I have a sequence that I sent to color, go to color, colour correct everything, render and then select Send to Final Cut Pro. FCP open, says importing XML, gets to about 50% and stops, no message or error. I don't get a new sequence from color, just nothing.
Tried importing just the XML with the came result.
I have tried trashing the prefs, went back through the time line and removed every effect and transition. Still does not work. I had it work once before and everything was fine. But now.....it is so frustrating. I just want it to work as I need to get this video finished.
I am running FCP 6.2 and color 1.2, the latest anyway. Does anyone have any ideas. I have wasted days on this and cannot get it to work.
Message was edited by: Jared Bell

Without access to the sequence, its impossible to say.
There is something in it that is corrupting the round trip. It might be illegal media (which would be otherwise perfectly fine in FCP) or it might be something nested that XML can't cope with, re-directing the links to the new media. Unfortunately, the KISS principle is king.
jPo

Send Date Does Not Appear for Email Notification

Hi All,
Email notifications to user's mailbox do not have a date of send thus user can't sort it by the date. Can anyone tell me how to make the date appear?
Thanks

Similar functionality is available in PO and Req Approval process. Can you take a look at the PO Approval Process workflow? I remember the email notification does show the link, which is a URL link and has parameters in it. This functonality provides where the approvers need to modify the document which is requested to be approved. So they can click on the link, modify and close and approve if necessary.
Are you expecting them to modify the same or you just want to show query only screen?
There is a webpage available to see order information called Order Information (user Order Information User resp). You can send parameters to that webpage and that should show login page opening up a seperate session with all the parameters in the URL. Once logged in that should show order information.
Thanks
Nagamohan

Tag colors not appearing

Hi there,
My colleagues and I use Thunderbird as our business email client. Our process is to tag incoming emails to one of the four members of our team, as each person is responsible for specific projects coming from different senders.
Our Team has four tags setup with the same naming convention and same color chosen for each of the four tags. However, we cannot see each other's tags.
Can you please help?!
Thank you,
Nina Joyce

To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Word Search not appear Problem

Hello Guy I need to help about Power Q & A word not appear
Example
Product name , Revenue in England it work
But
Product name , Revenue in America it not work and Wording "America" is white color (not appear)
But when i filter (filter function in the Right Hand i Choose America information is appear
Why this ..
Help me please Thank a lot all guy

Any suggestions for My?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

I have started to get this error message: 5.1.3 bad address syntax in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice?

I have started to get this error message: "5.1.3 bad address syntax" in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice? My email account is through Optimum online and I am using Airpost Express.
P.S. The error sound "bong" is driving us nuts!

Please post on the Office for Mac product forums that Microsoft hosts. It's their product and they can best troubleshoot the issue.

Custom Composed Look not appearing in Change the Look with custom color palette

Hi,
I created custom color palette, (which was a copy of one of the out of the box ones) and uploaded it to the Themes folder under a different name. I then went to the Composed Looks and created a new Composed Look(using the New
Items), which the seattle master page, and the new color palette that I created.
When I go to Change a Look, the new Composed Look does not appear as part of the options.
When I change the color palette of the Composed Look, to one of the out of the box ones, I see it I the Change a Look page.
What am I doing wrong?
Thanks

I would check two things. First, did you check in the spcolor file you created? Second, I would review all of the properties of your composed look found in "/_catalogs/design/AllItems.aspx". You might want to copy and paste all properties (except
title and name) and see if your new composed look shows up in "Change the look". Then link to your own custom spcolor file.
Eric Overfield - PixelMill -
blog.pixelmill.com/ericoverfield -
@EricOverfield

"Send to Color" Not appearing.

Similar Messages

Maybe you are looking for