Send to Speedgrade and Export EDL problems

So I'm working on a small series. I've got a final cut on Premiere Pro, and having already tested out Speedgrade I would like to use that for my final color correction and export. However I'm running into problems I'd never run into before. First the "Send to Speedgrade" option. When I use Send to Speedgrade, having my sequence selected, for some reason it is only exporting the audio and not the video. Once Speedgrade opens all I have is the .wav in the timeline from my sequence, but nothing else, all on one track. I've tried making sure my video was all on one track in Premiere Pro, and exported the audio and re-imported to put that on a single track in Premiere Pro as well, but still no joy. Seems strange cause I've never had this issue.
So I tried the export as EDL function, which never seems to work cause certain "edits" are not supported (even though it's just simple cuts.) In another forum I found out the issue can also be with the audio, so I tried to cut the audio from my sequence in Premiere Pro, export as EDL, and then open up that within Speedgrade, and importing the aformentioned audio track separately on the speedgrade timeline. This lets me open the EDL no problem (no red error message) and then reconnect the reels using my desktop, but my issue then becomes the audio. I can bring the audio in fine, but I didn't count on the fact that when I rebuild the reels it uses the audio from the original files as well. (obviously I can mute the track, as I just realized that simple fix while writing this issue up, but I still feel like I might be doing something wrong - because when I try to consolidate all the audio/video onto two separate tracks in Premiere Pro, it'll let me open the EDL I export into speedgrade, but the audio is still not showing up unless I import that separately.)
Anyway this is just weird as I never ran into these problems before. They might be first version issues that have been resolved, but I refuse to update speedgrade because everytime I do it crashes on startup, and no one has helped me with that previous issue, and despite my best efforts at resolving it using the forums I haven't had any luck.

Regarding the problem when you "Send to Speedgrade" and only the audio shows up, I just worked through the same problem (Premiere Pro CC 7.01)
You need to make sure the "work area bar" is selected around your timeline that you want to send to Speedgrade. If it has disappeared mysteriously (as it did for me), simply double-click where it usually shows up and it will reappear, with in and out points set to the extents of your timeline. Then send to Speedgrade and the video is sent along with the audio. Seems like a bug, or at least something that can be better documented. Though I suspect this workflow has changed in 7.1 ...
Cheers
Andrew Kornylak
fourmilemeda.com

Similar Messages

CS3 - Import and Export Quality Problems with Canon S90 .mov files

Hi Folks,
I have spent several hours searching with no results in the forums, and I am a beginner with Premiere, so I apologize for any annoying questions I may post.
Here is the problem I am having. The very first step! Go figure.
I have videos taken with a Canon S90 point and and shoot camera, in .mov format, 640x480, 30 frames per second.
When I play these videos in Quick Time or Windows Media Player they look great. Very sharp and smooth video.
When I import these videos into Premiere Pro CS3 - and don't do anything to them besides play them in either the source window or or Program window, the quality is much lower. They are not sharp, and have an unusual texture, almost like there is a tiny bit of water on the lens distorting the view as it moves.
I imported the video under the DV-NTSC Standard 48kHZ preset. I have the most updated Quick Time.
I also attempted to improve the view settings to their maximum with no results. I also exported the video to see if it was just the viewing, but the exported video is even worse. Very low quality and not sharp.
Thanks for any suggestions on the correct settings to import these videos without loosing quality.

Well, I have read and understand the Codec aspect a bit. I have discovered that my
files are avc1 H.264 Codec. Doing more research it appears that CS3 Premiere Pro has some trouble editing H.264 files.
So from what I gather so far, it looks like my best bet would be to convert the file into another format that is easier to edit by Premiere.
Is that correct?
If so, I am still unsure what to convert it to.
What is the program that is best to use to convert with?
Thanks again for your help.

Maybe I just dont get it, but what is the use of sending my Premiere project via EDL to Speedgrade?

I get an error message open the EDL file in Speedgrade unless ALL effects and transitions are removed. I don't get how this is helpful... how can I do my color grading but then also have the effects and transitions I want? I am fairly new using Speedgrade (CS6), and love it, but when I can't color grade and make the edits I want, what good is it to me really? I am hoping there is an answer to this I am simply overlooking as a new user of the program...

I appreciate the response. I just wanted to be sure there wasn't an easy way around my problem that I was simply overlooking. I love Speedgrade and the power it has - it just seems like for it to be any good to me, I have double or even triple my work time on a video project.
For example - I am working on a simple 1 minute video, which includes an interview shot in front of a green screen. The footage is a little dark, but with SG I able to make it look amazing. So, if I am understanding correctly, my 2 options are:
1) edit the parts of the interview I want into my PP project, when I am done, send it to SG, then color grade it. Only problem with this is that I have many crossfades in the video, and when I use "Send to Speedgrade", any part of the timeline that is a crossfade becomes it's own "clip". Therefore if I grade clip A one way, and clip B another, the transitional AB section looks totally different.
2) Send the clips individually to SG before I ever begin editing them, color grade then export. Then bring those in PP and edit everything together. Only problem there is, lets say, the green screen interview I spoke of. This is a 5 minute interview, and exporting this at a lossless quality takes FOREVER. I started it this way, and once the est. time hit 12 hours and was still climbing, I cancelled it.
Maybe the computer I am attempting to do this on just isn't up for the challenge (it's a 2011 macbook pro), but I have always used it for Premiere and AE, without any problems.
Anyway, again, I really appreciate the advice - I am still trying to wrap my head around what exactly my options are with Speedgrade. Like I said, I absolutely love it - and I really want to be able to use it.

Windows live mail having problum after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

windows live mail having problem after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

This is not usually related to AD issues, but it may be more of a DNS issue. I posted a request in your other thread to post an unedited ipconfig /all of the DC and of the client.
This may help use diagnose this issue and your other thread's printer issues.
Thank you,
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

SWF Export, no font showing in Acrobat and zoom border problem (Acrobat & Reader) - Indesign CS6

Hi Everyone,
If anyone could help me on this that would be great, I've spent hours on the forums and manuals to no avail.
I'm making an interactive PDF brochure in Indesign for one of our new products and I'm having issues (actual or perceived??!!) with the SWF export and PDF creation. I'm placing animations and video in the INDD, exporting it as an SWF (with the text option as Flash Classic Text) and then opening the SWF (not importing to a word doc or anything, just opening the SWF) with Acrobat using the advanced options to import the video resources and to enable the content when the page is opened. I then save the file as a PDF. In the PDF everything works as it should, the animations, the buttons, the video plays and so on. Great.. hmm not quite.
The trouble I am having is that all the content of the SWF when viewed in Acrobat seems to be getting rasterised/flattened - is this correct? After the SWF is opened, Acrobat indicates no fonts in the fonts tab in the document properties so when the SWF is zoomed in Acrobat, or the saved PDF in Reader, the font gets pixelated and the document is not searchable/text can not be highlighted. The images are not selectable either - it is as if the entire page has been flattened to one image. Is there a way to stop this so that the SWF opened with Acrobat retains the font and individual images like a normal PDF? Do I have to open the SWF in Flash first to set some parameters or something? Is there something I am doing wrong when exprting the SWF from Indesign? I think I have tried about every possible export combination. When I open the .HMTL (exported at the same time as the SWF from Indesign) in a browser, the same happens. All the animations work but the text appears to be rasterised/flattened/not searchable. Sorry if I'm not using the correct terminology.
I have tried importing the SWF back into another new INDD and exporting that as an interactive PDF but then the video does not work. I suppose I could try exporting all the individual animations as SWFs, importing them all and trying to get them to work with the video but I can see that will take quite some time and does not seem to be a guaranteed solution from what I have read on the forums - video playback being the issue.
Another problem is that when the SWF, or saved PDF, is zoomed in Acrobat/Reader between approx 150% and 210% a thick white border appears in the document and the content is squashed into the middle creating a slightly pixelated and narrow page. When I zoom out from the page I get a small white line on the right hand border at around 70% zoom. Please see images. Does anyone have any idea why this is happening and what I can do to fix it?
On another, sort of related topic, my timing panel went blank yesterday and was not showing any animations in documents that it had been used to order and synch animations on page load as well as new documents. The panel was blank. I updated to V8.0.1 and the panel sprang back into life - hope that helps anyone else finding the same problem.
I am not very familiar with Indesign/Acrobat/Flash so I guess all the above could be what I'm doing or I could be asking really dumb questions - apologies from a newbie.
Best,
Emily

Hi All,
I have now pretty much solved all the issues by creating the SWF in Flash rather than Indesign. I would advise anyone looking to create an interative PDF with animation and interactivity to go with Flash from the start. While Flash is a little more involved to create the same effects as Indesign, the extra time taken will ensure a more controllable and better looking PDF in terms of text quality, scalability and so on. Plus you will not spend days trying to get video to work along side imported SWF etc in Indesign. One of the best controls in Flash is being able to set the stage.scaleMode for the document so the PDF still looks crisp when zooming, no white borders etc. So, create the .fla, export to .SWF, open the .SWF with Acrobat, modify the advanced settings to enable start on page load and save as a PDF. If you don't know Flash, I didn't a couple of days ago, watch a couple of tutorials on Youtube.. buttons, tweens, embedding video and you'll be ready. Don't be put off by ActionScript, there are really handy Code Snippets in CS6 that do all the heavy lifting for you.
Sorry Indesign!
Best,
Em

I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Indesign CS4/CS3 and Export to PDF problems

Hello,
I have been having problems with both Indesign CS3 and CS4 and exporting large documents to a PDF-file. Exporting halts with error messages like: "Failed to Export the PDF file" in CS4 or "Error encountered while reading JPEG image" in CS3.
Problem can be corrected by simply closing InDesign and restarting it and opening the same file again. It appears that problem occurs more often the file is large. Any suggestions how to fix this problem?
I'm using Vista 64-bit and have 8GB memory.

Handling of missing links HAS changed, and in my opinion for the worse, but at the request of users, so that missing links no longer open the Links panel automatically or ask you to update on opening as they used to, though you should still receive a warning that the links are missing UNLESS YOU HAVE TURNED IT OFF IN YOUR PREFERENCES. It's on by default and you will find the option under the file handling section.
The rationale is that many workflows do not require that links be intact to accomplish the current editing, and longer documents with hundreds of missing links used to take many minutes to open while ID searched, essentially costing those users lots of money.
IF you have stored the links in the same directory as the .indd file, and IF you have moved the entire directory and IF you have enabled finding missing links when opening files, InDesign will find and update the locations for the links when the file is opened. If ID is unable to locate a link, because it is not in the current directory or a subfolder, you will see a warning message (in the past you would have had the option to browse for the missing files), and you must open the links panel if you wish to fix them manually.
In my opinion this is a very acceptable situation, and a great benefit to all types of workflows. I need to know links are modified or missing, so I've left that enabled. Those who don't need to know are no longer bothered or delayed. I suggest you pay a visit to the preferences and make sure that missing/modified checks are enabled, and if you are still having problems then your links aren't stored in the same directory, and that has always been an issue in ID when things get moved.

Problem embedding video in Pages and exporting as epub

I'm using pages 09 ver 4.2 (1008). I' trying to embed video (.m4v and .mov) I can't find the checkbox 'Copy audio and movies into document'. The user guide says it's an advanced option on the 'save as' but my version of pages runnning on Lion 10.7.4 doesn't have a save as'- just a 'save a version. It apparently does auto save).
I'm using Book Proofer to send the epub generated by Pages to my iPad. The strange thing is that some times the videos work and then I add another and one that used to work don't even appear when viewed on my iPad.
Any one had experience adding video (eother m4v or mov files using pages and exporting as a epub?
Thanks for any insights!
Steve

As far as I know, the Keynote export does not support video, only images and text (and, new with version 3, mp3 audio!).

I m trying to send a email and sms alert using php and it works fine on all systems except on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india. plz help

I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
$headers = "MIME-Version: 1.0\n" ;
            $headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
            $headers .= "X-Priority: 1 (Highest)\n";
            $headers .= "X-MSMail-Priority: High\n";
            $headers .= "Importance: High\n";
            // Additional headers
            $headers .= 'From: Rakesh <[email protected]>' . "\r\n";
            foreach($disemail as $email)
                $to = $email;
                $subject = $succMessage['email_subject'];
                $message = $smsText;
                mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
        if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
        $smsText = utf8_encode($smsText);

i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
would like to have your thoughts though.
$headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n format=flowed Content-Transfer-Encoding: quoted-printable";

Export and import, same problem in 08 as in 07!

I am so fed up and frustrated with this problems in iPhoto, I had exactly the same thing in iPhoto´07, and on an other installation:
When I import pictures from a folder on my HD, it imports the pictures, but it NEVER finishes the import-process! It goes on and on forever. So I have to terminate iPhoto and restart. The pictures are then imported, but the "Last import" folder is not updated. And I don´t know what harm this does to the library. Anyone else with this problem?
I also cannot export. It exports up to ca 370 pictures, and then I get this message "cannot create folder .....".
I have no iPhoto plugins. A new fresh plain installation, plenty diskspace and 2 GB ram
I removed iPhoto and then reinstalled - didn´t help
I did repair disk/permissions, didn´t help
I rebuilded the database, didn´t help.
My guess is this is a bug in iPhoto, when will Apple fix this!

Sitara:
Boot into Safe Mode and try to import. If it works then there's something amiss with your primary account. It may be another preference that iPhoto interacts with. To see if that's the case do the following:
Trouble Shooting Preferences
Go to HD/Users/Your_name/Library. Move the Preferences folder (in its entirety) to the Desktop and make a second copy of it so you have Copy A and B. Now try the the process again and determine if problem is fixed.
If the problem IS fixed, then go to the new Prefs folder that the OS will have created and open it up.
Open Copy B on the Desktop and select all of the items inside. Drag them into the open new library folder. When the Copy window comes up check the Apply to All check box and then click on the Don't Replace button as seen here. That will keep the new files created and bring back all of the others.
If the problem is NOT fixed, trash the new Prefs folder and move the intact Copy A folder back to the Library folder .
If the import problem persists in the Safe Mode, I suggest you reinstall the 10.4.10 COMBO updater followed by a repair of disk permissions.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

TS3276 I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights.

I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

Exporting tiff and jpg together problems Lightroom 3.1 w/ Adobe Leopard

When both are exported w/ writing a CD: makes corrupt file some do not open and some no thumbnails...on Mac Powerbook and Macbook

Well known problem in Leopard. It trips up on some metadata that Lightroom writes to the files. This is a bug that Apple introduced late in the leopard development, but that they still have not fixed. You should only come across the bug if you write the originals, not if you export new versions of the file.

Data importing and exporting problem between BADI's

Hi Experts,
I am facing a problem in importing and exporting the data between badi's.
I am able to import and export the data between DOC CHANGE and DOC CHECK BADI's etc; but now i have a requirement to map a field from SRM to R/3.
Supplier order key field which is added to the basic data section of Shopping Cart should be mapped to the corresponding fields in R/3. I have added the field and when i am trying to map it to R/3 i am facing the probelm.
This Supplier order key field will be coming from ZBBP_CATALOG_TRANSFER badi and i am trying to map it in the Z_BBP_CREATE_PO_BACK Badi; i tried by using the below statement to export a single parameter to PO BACK badi from CATALOG TRANSFER Badi
EXPORT zsupp_ord_key FROM zsupp_ord_key TO MEMORY ID 'Z_SUPP_ORD_KEY'.
which is not working.
IMPORT zsupp_ord_key TO zsupp_ord_key FROM MEMORY ID 'Z_SUPP_ORD_KEY'. in PO BACK BADI.
Can any one please let me know why this is happening?
And i have strange problem in this ...
when a user copies a catalog which is already created then we can not map the field to R/3 PO
and again if he tries to create a cart by selecting "Old carts which are already created" we cant map field for the above two things to happen i think we need a custom coding .....
Thank you
Lokesh.

Hi Lokesh,
BADI implementations have classes for which an instance is created at runtime and hence the import and export memory logic will not work.
Please try to create a function module for these BADI and call them in these BADI's. Then go ahead with the import and export logic. This could help.
I would rather advice, to figure out an option to avoid this memory manipulations.
Regards
Kathirvel

How do i send an html file exported from muse as email blast with images and live links?

My question it:
How do i send an html file exported from muse as email blast with images and live links?
I have designed a "website" in adobe muse and exported it as an html file. I am not sure how to send my .html file in an email!
Best,
Nicole

Unfortunately, the answer is, you don't. The requirements for HTML displayed in an e-mail reader are very different than those for HTML displayed in a browser. The output of Muse won't work as an HTML e-mail. You could upload the Muse site as a website and provide a link to it in an e-mail, but the HTML generated by Muse is not suitable for direct display by an e-mail program.

Send to Speedgrade and Export EDL problems

Similar Messages

Maybe you are looking for