SendAs being overwritten on all mailboxes

We have had persistent problems getting SendAs to work; we set it up in EMC on a mailbox (delete old SendAs, add a few new ones), all seems OK, then an hour later the SendAs has been overwritten by the old SendAs setting. I've checked and all the mailboxes
have the same SendAs accounts attached: one domain user (non-admin) and a UUID presumably from a deleted account.
Any ideas?

Hi,
Please refer to the following article:
http://3cvguy.com/active-directorys-sdprop-process-vs-exchange-send-as-permissions/
Obviously the “right” way to solve this is to remove a user’s account for the protected groups and create them a supplemental admin account. It is important to note that even if you remove a users from the protected group the “AdminCount” value will
NOT change from “1” back to “Null” (which is why users who were removed months ago were still having the issue). You will have to manually go into ADSIedit and manually change the attribute back to “0”. So, if you can’t remove the user from the
protected group in a pinch the one solution I like is to modify the “adminSDHolder” object’s permissions in ADSIedit so the changes propagate to anyone in the protected group. This will prevent my “send-as” permissions from being overwritten.
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information. And the changes made in the above blog is not supported officially by
Microsoft.
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

Messages from sender being overwritten by another in my inbox- why?

I am missing messages from senders because they are being overwritten by messages from another sender when they get to my inbox. The original sender is listed in the header as "From", but the rest of the info in the header is for the other sender. Both senders are expected (both are newsletters). This happens randomly and has been happening for a couple months. Any ideas on what is happening?
Update: This is continuing to happen as of today ( 19-Nov-2014). One message was downloaded and filtered to one of my local folders correctly, but then it also overwrote another message currently downloaded in my inbox, but left the Thunderbird inbox 'from' and 'subject' fields intact indicating the sender of the message that it overwrote in my inbox. But when I open it, I get the same newsletter that was filtered to the folder (in the same download batch) as the newsletter that opens in my inbox with the sender/subject of the other newsletter. This is very frustrating... I'm considering alternative to Thunderbird.

Hi,
I'm with Russ. This sounds ugly and I've never seen it before. However, there is another interesting thing that happened to someone else in 9.0.4 version recently where the workbook was owned by one owner, shared to another, a modification made to the workbook by the shared to userid. The original workbook accepted the change. It sounds like this was caused by IDENTIFIER issues. Could it be possible, (improbable I think), that the IDENTIFIER on each worksheet is the same? I don't know how this could happen but I bet a million dollars once (that I don't have) that the workbook situation couldn't happen. To check this, right click on each worksheet name and checkout the IDENTIFIER. I also think you should log a SR. It would be nice if you would post the resolution here once one is found.
The workbook issue has been logged as bug 7565438 . (problem identified by stephen lee)
Thanks for sharing an interesting issue!
Nancy

I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. How do I resolve this issue?

I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. I did not have this issue in the older version. I use an iMAC running OS10.6.8. How do I resolve this issue?

Starting with this, you have errors in your CSS code.
body {
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 0px;
color: 151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: EFF5F8;
body {
margin:0;
color: #151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: #EFF5F8;
font-size: 100%;
Related links:
Windows Chrome, why do my fonts look so bad? - Lee Green
css3 - Bad font rendering Chrome - Stack Overflow
Nancy O.

Allow all mailbox users to send emails up to 100 recipients (Exchange 2010)

Greetings,
Could you please help on writing a Powershell script using Exchange Management Shell on how to realize the following:
I want to grant all recipients the ability to send emails up to 100 recipients, this rule will be applied by default to all mailboxes including the new created ones and the old ones.
FYI, i tried the following cmdlets from the organizational level:
Set-TransportConfig -MaxRecipientEnvelopeLimit 100
This cmdlet did not applied to all mailboxes, because i have found some ones have unlimited RecipientLimits, some others have more than 100, newly created
mailboxes are unlimited by default !
Here is the cmdlet i have used to verify the
RecipientLimits one some mailboxes:
Get-Mailbox -Identity
"username" | Select-Object RecipientLimits | fl
I want to force all users including the new and old ones to have RecipientLimits to 100, and if a user needs more than 100 i can grant him/her explicitly.
Thanks in advance.
Redouane
Redouane SARRA

Thanks a lot, it works with all existing mailboxes, But not with new mailboxes which are unlimited by default.
I want this to apply to all mailboxes including newly created mailboxes.
Redouane SARRA
Ask in Exchange forum to teach you how to create users from a template and set the template to the value you want.
The Transport limit superceded the user limit. If the transport is set to 100 then ALL users are limited to 100.
This is why I recommend posting in the Exchange forum. Don't ask how to write a script. Ask how to set the limit in Exchange 2010. They will give you a link to the appropriate documentation, The issue I snot a scripting issue but
is a "how do I use Exchange " issue. Asking the correct question will get you further. Of course training in Exchange would be most helpful.
¯\_(ツ)_/¯

Why do not Apple send a fix for all fail´s / slow mac`s afther upgrade to Yosemite

I have upgrade 2 of my Macbook air 11" models. Both have major slow functionality in allmost every programs. slow mail, safari, pages. Allmost nothing of the funksjonalitys can being uses in numbers. Slow functionality when jumping between programs. Allover i have BIG problems with mac for my first time. And why do not Apple send a fix for all fails there is after upgrading to Yosemite. When thousand of users have the same problem with major slow mac`s.
Here is a test for my mac.
EtreCheck version: 2.1 (101)
Report generated 4. desember 2014 kl. 22.48.33 CET
Hardware Information: ℹ️
MacBook Air (Verified)
MacBook Air - model: MacBookAir6,1
1 1.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1366 x 768
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:12:8
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500,28 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 496.30 GB (371.41 GB free)
Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[not loaded] com.parallels.virtualsound (1.0 18 - SDK 10.6) [Support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Support]
/Library/Application Support/Kaspersky Lab/KAV/Bases
[not loaded] com.kaspersky.kext.kimul.38 (38) [Support]
/Library/Extensions
[loaded] com.silex.driver.sxuptp (1.10.9 - SDK 10.8) [Support]
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.61 - SDK 10.6) [Support]
[not loaded] com.freecom.driver.BoulderScsi (1.0.0d1) [Support]
[not loaded] com.kaspersky.kext.klif (2.2.1d19) [Support]
[not loaded] com.zg.driver.ZGUSBCDCACMData (1.5) [Support]
[not loaded] com.zg.driver.ZGUSBMassStorageFilter (1.5) [Support]
[not loaded] com.zg.driver.cdc_ecm_qmi (1.9) [Support]
[not loaded] com.zg.driver.cdc_usb_bus (1.9) [Support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungACMData (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungMTP (1.2.61 - SDK 10.5) [Support]
[not loaded] com.devguru.driver.SamsungSerial (1.2.61 - SDK 10.6) [Support]
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[failed] com.kaspersky.kav.plist [Support] [Details]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.parallels.mobile.dispatcher.launchdaemon.plist [Support]
[failed] com.parallels.mobile.kextloader.launchdaemon.plist [Support] [Details]
User Launch Agents: ℹ️
[running] ca.indev.MailTagsHelper.agent.plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
[loaded] com.parallels.mobile.startgui.launchagent.plist [Support]
User Login Items: ℹ️
iTunesHelper ProgramHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
fuspredownloader ProgramHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
nplastpass: Version: 3.1.61 [Support]
JavaPlugin2_NPAPI: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
userinternetplugins ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
Facebook Cleaner
Pin It Button
LastPass
ResizeMe
OpenIE
3rd Party Preference Panes: ℹ️
Cineform [Support]
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 496.30 GB Disk used: 124.90 GB
Destinations:
Data [Network]
Total size: 3.00 TB
Total number of backups: 65
Oldest backup: 2013-08-15 20:20:51 +0000
Last backup: 2014-12-04 17:20:31 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 496.30 GB X 3)
Top Processes by CPU: ℹ️
     4% WindowServer
     1% fontd
     1% cloudd
     0% Safari
     0% launchd
Top Processes by Memory: ℹ️
369 MB com.apple.WebKit.WebContent
155 MB Safari
103 MB Feedback Assistant
86 MB Finder
69 MB mds_stores
Virtual Memory Information: ℹ️
4.52 GB Free RAM
2.60 GB Active RAM
652 MB Inactive RAM
820 MB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 4, 2014, 10:37:00 PM Self test - passed

[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
Your machine is slow because you loaded a bunch of third party junk on it.

Variable being overwritten in the Variable Substitution (File Adapter)

In the File adapter Receiver Communication Channel, I am using variable substitution.
The problem is that the first variable I use (userid) is being overwritten by the second variable (filenumber). How can I fix this problem?
File Name Scheme: %userid%_%filenumber%.xls
Target XML:
============
<?xml version="1.0" encoding="UTF-8"?>
<Workbook xmlns="urn:schemas-microsoft-com:office:spreadsheet" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:x="urn:schemas-microsoft-com:office:excel" xmlns:ss="urn:schemas-microsoft-com:office:spreadsheet" xmlns:html="http://www.w3.org/TR/REC-html40">
<Worksheet ss:Name="FileName">
<Table x:FullColumns="1" x:FullRows="1">
<Row>
    <Cell><Data ss:Type="String">0209519</Data></Cell>
    <Cell><Data ss:Type="String">32226v2 v1.1</Data></Cell>
</Row>
Variable Substitution:
=======================
userid          payload:Workbook,1,Worksheet,1,Table,1,Row,1,Cell,1,Data,1
filenumber    payload:Workbook,1,Worksheet,1,Table,1,Row,1,Cell,2,Data,1
Expected Output:
==============
0209519_32226v2 v1.1
Actual Output:
============
32226v2 v1.1_32226v2 v1.1
Thanks for your help.

Thank you for all your suggestions. I decided to modify my target XML and concantinate all the fields into one string so I don't have to worry about the variables being overwritten in the variable substitution.
Target XML:
============
<?xml version="1.0" encoding="UTF-8"?>
<Workbook xmlns="urn:schemas-microsoft-com:office:spreadsheet" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:x="urn:schemas-microsoft-com:office:excel" xmlns:ss="urn:schemas-microsoft-com:office:spreadsheet" xmlns:html="http://www.w3.org/TR/REC-html40">
<Worksheet ss:Name="FileName">
<Table x:FullColumns="1" x:FullRows="1">
<Row>
<Cell><Data ss:Type="String">0209519_32226v2 v1.1</Data></Cell>
</Row>
Variable Substitution:
=======================
filename payload:Workbook,1,Worksheet,1,Table,1,Row,1,Cell,1,Data,1
Expected Output:
==============
0209519_32226v2 v1.1
Actual Output:
============
0209519_32226v2 v1.1

SmartView 11.1.2 install being overwritten by previous uninstalled version

I am not sure how to explain this but my SmartView 11.1.2 install is being overwritten by the previous uninstalled version (11.1.1.3).
On our Windows 2008 server 32bit with all SPs installed, we had 11.1.1.3 installed and we uninstalled it. We then removed the c:\hyperion directory. We rebooted and then installed smartview 11.1.2.0 which appears to go to the c:\oracle\product\smartiew directory.
When the first new user logs in and opens Excel, a small program starts to run and SmartView 11.1.2.0 gets configured and Excel shows an "Smart View" tab.
Everything is fine until a user who previously was using Smartview 11.1.1.3 launches Excel... When they launch Excel it starts an installer which recreates the c:\hyperion directory and installs 11.1.1.3 and then Excel opens with a "Hyperion" tab.
The new users that previously had never used 11.1.1.3 are are still in 11.1.2.0 until they close Excel. The next time they open it they no longer have the 11.1.2.0 SmartView Tab but instead have the 11.1.1.3 Hyperion Tab.
Has anyone ever seen this before and/or have any ideas on how to stop it?

Note: I redid my steps one more time. The 11.1.2.0 version installs by default to c:\oracle\smartview not c:\oracle\product\smartview.
Also, I searched the entire server for .msi & .exe files and may have found the culprit. After running the following & selecting uninstall it appears I may have 11.1.2.0 working for all users:
c:\Windows\Installer\ab630db.msi dated 7/30/2010 3:59pm author: Oracle Size: 7.223KB.
Edited by: Mike W on Sep 7, 2010 4:42 AM to denote status...
Edited by: Mike W on Sep 8, 2010 8:48 AM This may be resolved as finding the ab630db.msi may have cleared it up.

How do I send SMS only at ALL TIMES with an iPhone to ALL contacts? My family shares iPads under my ID and now my teenager gets all my business texts!

How do I send SMS only at ALL TIMES with an iPhone to ALL contacts? iOS 8 now forces all Apple users to use iMessage all the time with all other iOS users. The option to send as SMS only is subordinate to iMessage in iOS 8 settings and CANNOT be turned off to send only SMS texts to another iOS device! This is a serious privacy issue for all households using iOS and doing family sharing, including over a number of iOS devices, under one member's Apple ID. Why should business conversations or financial conversations between parents be readable on an iPad in the hands of a teenager or a seven year old? The answer is not as simple as "Just don't enable iMessage on your other devices," because amy family that shares the Apple ID password is vulnerable to teenagers particularly hacking into iMessage to monitor, for example, what their parents are saying. If I were Samsung or Google I would hammer this issue immediately and continually until it is fixed by Apple (and I'm not sure why they haven't yet). iMessage is a convenience but it has this serious limitation given the architecture of the Apple universe. Apple simply cannot force all its users to conduct text messaging in arbitrarily limited way, any more than it was able to force all its users to switch from Google Maps. When will Apple fix this?

Trademann wrote:
Fox, that does not work, because then you are blocked from sending any form of message to another Apple user. iMessage MUST be activated to text any other iOS device. And then Apple defaults by ALWAYS using iMessage between iOS devices.There is simply no way, within iOS 8, to send SMS only to another Apple user. Apple has made that impossible.
The SMS-only choice used to be on the same menu level as iMessage, but now it is locked WITHIN iMessage, and is not available as a choice unless iMessage is activated. Then it is limited solely to being used if iMessage is not available.
I'm sure their argument is that they are saving their customers money because iMessage is free, but they are imposing an opportunity cost on 100 percent of their user base in the guise of saving that money. What they are really doing is entrapping faithful users such as myself further within the Apple ecosystem. If I hadn't already spent thousands of dollars on my iTunes library I might consider a Galaxy ... Samsung does not deserve to regain any momentum if they can't figure out how to exploit this.
Turning off iMessage does not prevent you from sending messages to other Apple users. You can send an SMS to any iPhone without your own iMessage turned on, even if it is turned on on their iPhone.
The SMS-only option is: Turn off iMessage. Literally. That's it.

Is there any way to prevent fields from being overwritten when importing data via xdp-file?

In an pdf-form designed with LCD everytime the form gets merged with an xdp-datafile content of all fields get overwritten, regardless which data-binding (normal, global, none) is assigned to the fields and regardless if the fields are exluded in the xdp-datafile. Is this normal behavior and is there any way to prevent fields from being overwritten?

The xdp-file is first exported from Acrobat Professional 8 (export data as *.xdp) to get the complete structure. Then in the xdp-file some fields are removed manually and other fields are filled with data. When the modified xdp-file is opened again with Acrobat Professional 8 it grabs the original pdf-form and merges the manually filled fields into the form. With the merge all other fields in the form are overwritten, even if they are not defined in the xdp-file. And that is what I want to avoid. I want to merge the xdp-file into the form and keep the data in fields not defined in the xdp-file.

Session Cookies Being Overwritten Browsing From SSL to Non SSL

I have created a bug report for this issue as well.
Please note I am using J2EE session variables so keep that in mind.
I am seeing session cookies being overwritten when browsing from an SSL connection to a non SSL connection.
For example:
Visiting https://www.domain.com/ results in a JSESSIONID cookie being set with details being send for "Encrypted connections only".
Visiting http://www.domain.com/ results in a JSESSIONID cookie being set with details being send for "Any type of connection".
Here's the problem:
Say for example, you're logging into an admin module located at https://www.domain.com/admin/. Once authenticated and some session variables are set, you browse to http://www.domain.com/. When that happens your session cookie (JSESSIONID) is overwritten with a new value and you instantly lose your authentication in the admin module.
Obviously this is causing massive problems for my clients that bounce back and forth from SSL to non SSL connections which is common for e-commerce websites.
Steps to Reproduce:
1. Clear your cookies.
2. Visit a web page such as https://www.domain.com/. Note the JSESSIONID cookie value.
3. Visit a web page such as http://www.domain.com/. Note the JSESSIONID cookie value and how it was overwritten.
This behavior changed in ColdFusion 10. ColdFusion 9 did not overwrite the session cookie.
Has anyone else experience this?

Deleting and re-adding my account seems to have fixed it. I think when I initially added my Google Talk account, it was by using the "Add Jabber Account" under 10.6 or something. Now, when I re-added my account, I notice both "Google Talk" and "Jabber" are options, so my thought here is that Jabber and Google Talk options are no longer quite the same thing.

Files being overwritten

I just upgraded to Dreamweaver CS3 from MX 2004. I have the
following enabled for my site definition: Maintain synchronization
information; Enable file check in and check out; and Check out
files when opening. The problem is, every time I open a file
locally, it automatically and instantaneously gets overwritten by
the remote file. This did not happen with MX 2004, and this has
caused many problems for me. Is this supposed to be happening, or
do I have a problem here? I've tried disabling Maintain
synchronization information, but this doesn't change anything. Any
and all help is greatly appreciated.

> Isn't that the point of the
> synchronization feature - to alert you when your files
are not synched and
> then
> let you choose what you want to do?
If you are using checkin/checkout, the remote site is the
gold standard for
all checked-in files. Thus, overwriting your local copy is of
no
consequence, since you cannot have made changes to the file
after it has
been checked in. It would be unnecessary for DW to ask if you
want to
overwrite it, because DW assumes that you know it will be
overwritten by
virtue of the fact that you have just initiated a checkout
operation. Get
it?
> If a co-worker checks
> out a file, makes a change to it and checks it back in.
I can then check
> out
> that file and make changes of my own and check it back
in, right? Am I
> misunderstanding you on that?
Your understanding as expressed in the first two sentences is
absolutely
correct.
If your co-worker checks out a file, you cannot check it out
until it's
properly checked in by your co-worker. Once the file is
checked in, you can
then check it out.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"akirell" <[email protected]> wrote in
message
news:[email protected]...
> If the automatic overwriting of files upon opening has
always been, I
> never
> noticed it. I have always had file check in/check out
enabled, yet never
> experienced my files being overwritten until CS3. The
specific problem
> with the
> file being automatically overwritten is simply the fact
that I feel I
> should be
> asked first if I want to overwrite the file. Isn't that
the point of the
> synchronization feature - to alert you when your files
are not synched and
> then
> let you choose what you want to do?
>
> Also, you said if a file is properly checked in, then I
will not be able
> to
> make any local changes. That doesn't make sense to me.
If a co-worker
> checks
> out a file, makes a change to it and checks it back in.
I can then check
> out
> that file and make changes of my own and check it back
in, right? Am I
> misunderstanding you on that?
>

How to block domains not for all mailboxes in our organization?

Hello everybody! Need some advice - I have a script to block some domains ("black domains list") - I am using this command: Set-SenderFilterConfig -BlockedDomains:$list But now I need to block these domains not for all mailboxes in our organization,
for example: somebody is sending a message from "black" domain company.com and there is a mailbox [email protected] - so only this user should receive message from "black" domain. Any others should receive nothing even their addresses
are in copy. Is it possible? Thanks.

Hi,
When we use Set-SenderFilterConfig –BlockedDomains to block domain, exchange will block any messages from that domain without any exception.
The only thing I can think of is transport rule, so please try to create this transport rule to have a test:
If this transport rule doesn't work, then there is no way to block domain not for all mailboxes in organization based on my knowledge.
Best Regards.

Providing administrator(s) full mailbox access to all mailboxes (database) not working

I'm setting up a new Exchange 2013 org. Everything is pretty fresh, only a few mailboxes have been added for testing.
I've added this permission, to provide full access to all the mailboxes in the database:
Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
I've verified the permission in ADSI Edit.
I have verified the permission in the recipient's mailbox delegation properties.
However, while logged into OWA using the admin account, if I try to open another user's mailbox from OWA, I just get a sad face that says "Something went wrong :( " .
Any ideas? I've tried resetting the owa virtual directory...reset IIS, rebooted several times, no luck.
Thanks

Hi
Is that ok when you set to single mailbox?
If ok, please try
Get-Mailbox -database “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
Cheers
Zi Feng
TechNet Community Support
Please see the original post, I've already tried "Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission
-user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As"
If I add the permission individually through ECP, it works just fine. What I'm trying to accomplish is full mailbox access to all mailboxes in the database now and in the future
(something that works just fine in Exchange 2010,) however in 2013 it is not working. I tried doing it via a security group instead, same result.

Some users are having access to all mailboxes when they configure thier outlook

for 7 users the get access to all mailboxes so when they configure their outlook profile they get about 700 mailbox so outlook hangs this happens with new created users the same 7 users will get access to them as will
i tired this
Get-Mailbox | Remove-MailboxPermission -User Administrator -AccessRights Fullaccess -InheritanceType all
nut then i got this
An inherited access control entry has been specified CreateChild ControlType Allow
then o tried removing from the DB level
Remove-Adpermission "DB" -user "jobs" -extendedrights Receive-As
Remove-Adpermission "DB" -user "jobs" -extendedrights send-as
Remove-Adpermission "DB" -user "jobs" -extendedright ms-Exch-Store-Admin
but stilll the same

hi thank you, looks i need some more detail on how to do this
i saved the lines on a .ps1 file tried to run it on exchange and i got the below , can you illustrate more how to do this
The operation couldn't be performed because object 'sharedmailbox' couldn't be found on 'DC.mydomain.com'.
    + CategoryInfo          : InvalidData: (:) [Get-MailboxPermission], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : E61E2EBE,Microsoft.Exchange.Management.RecipientTasks.GetMailboxPermission
Cannot bind argument to parameter 'Instance' because it is null.
    + CategoryInfo          : InvalidData: (:) [Remove-MailboxPermission], ParameterBindingValidationException
    + FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,Remove-MailboxPermission
Cannot bind argument to parameter 'Identity' because it is null.
    + CategoryInfo          : InvalidData: (:) [Add-MailboxPermission], ParameterBindingValidationException
    + FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,Add-MailboxPermission

Can't send on behalf of a mailbox, unless it is added as an account to Outlook

As the title states i can't send on behalf of one of our new IT Support mails. I've added myself to the delegate access in Exchange. We are running Exchange 2010. Here comes the weird part.　I can't send on behalf for some reason, but if i add the IT Support
account to my Outlook, I suddenly CAN send on behalf of it. This makes absolutely no sense to me whatsoever. And to make matters worse, i tried testing if this was the same for all mailboxes. I made a new test mailbox, and added myself as delegate (i.e. same
settings as the IT Support mailbox) and nothing else. This time it worked WITHOUT adding the account to my Outlook. I realize this is a workaround, but i want to be able to send on behalf of our IT Support mail without having to add it to Outlook for every
user that needs to use it. Anyone have any suggestions as to what is wrong? And how to fix it?

Hi,
If you want to send on behalf of the IT Support mailbox, please make sure the following settings have been configured in Exchange:
1. Open Exchange Management Console, expand Recipient Configuration > Mailbox.
2. Right-click IT Support user > Properties.
3. In Mail Flow Settings tab, click Delivery Options > Properties.
4. Make sure your account is listed in Send on behalf permission list. If not, please add it. If it does, please remove your account, Apply it. Then add it back to have a try.
Then check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

SendAs being overwritten on all mailboxes

Similar Messages

Maybe you are looking for