Sender Agreements for HTTPS

Hi
I am aware that there that there is no Sender Agreement necessary for sender Http scenario, maybe a silly question but why in that case is there a Sender option on the HTTP communication channel ?. Also for HTTPS if there is no sender agreement (hence no Communication Channel) then where can HTTPS be assigned as the Security Level on the channel, i.e. the "Security Check for Incoming Messages option".
Thanks
Damien

Hi!
According to my knowledge in XI there the HTTP Sender service is in disable and eventhough u can create in XI. but now in Latest version like PI 7.1 the service is enable
In mostly in some real time projects there are some requirements like they need some security purposes in that cases mostly they need a Sender agreement mandatory for security purpose.
Inorder to satisfy these requirements they are configuring HTTP sender and hence Sender agreement and but they are selecting as HTTPS protocol and while selecting HTTPS protocol kindly note one point that your network Firewall settings needs to be in open and they needs to all the flow of messages.
I hope now you are free from confusion.
Regards:
Amar Srinivas Eli

Similar Messages

  • Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sender .

    Hi Buddy's,
                         Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sender .And why we create receiver agreements at receiver side bt not sender agreement at sender side.
    Wat Is GLOBAL Container ?, where it will Occur & wat is the functionality of that.

    Kumar,
    1) XI integrattion server - IS expects the messages in XML format. If you see the HTTP request you will see that we pass all the info contained in the Sender areement in the the HTTP request itself , namely - Message interface, message type and the namespace (along with login parameters). For IDOCs the the IDOC- XML are are sent to the IS (through IDOC port configuration at the source system.
    2) When send a message to XI the sender knows that XI system parameters, but when at the reciver end there could be any any system that is reciving the IDOc/HTTTp message. you specify those message through a commumication channel and this channel is associated to a receiver agreement.
    3) A Global container is like a place holder for variables. You can set a variable here and access it throughout your mapping and hence the name.
    A good example for a gloabal container is a counter to countthe number of records in te target side.
    Regards,
    Arvind ravindran

  • Why we do not need sender agreement for Mail and SOAP adapter

    Hi SDN,
    I know, we do not need sender agreement for IDOC ,HTTP,XI adapters. As these three adapters will run in Integration engine of the abap stack.
    <b>In our scenario if sender is other than  IDOC or HTTP or XI .</b>
    By Refering Sivamni's blog.
    <b>/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
    message will be pickedup by communication channel with the help of sender agreement and prepare XI message header by performing cpa cache lookup. then message will go to module processor etc.
    <b>In our scenario if sender is IDOC or HTTP or XI .</b>
    As these 3 adapters are run in Integration engine.
    Doubt 1:
    how the integration engine will create the xi message header like sender interface sender system name etc...
    Doubt 2:
    I believe SOAP and mail adapter will run in adapter engine.but i came to know that we do not need sender agreement and sender comm channel for these two adapters too...then how the XI message header will create...
    Please do correct me if i am wrong
    and throw some light on the same..
    Appreciate your help....
    Regards,
    Reehan.

    Reehan,
    Thanks for pointing me to that link. Guess I was wrong .,But,let me try to put to you why you need a sender agreement for a Sender SOAP Adapter,
    1. In the sender SOAP adapter , the Sender Interface and the Interface Namespace as provided in the fields Default Interface Name and InterfaceNamespace. The Name of the Sender Service is provided in the WSDL when you ceate the WSDL in the Integration Directory. So, as all details are available in either the Sender SOAP adapter or in the WSDL url you do not need a Sender Agreement. It is not obligatory but you can always create the Sender Agreement.
    2.  For the mail adapter , if you select the option XIPAYLOAD, you will have the option to mention the Interface Name and Interface Namespace under XI Parameters  and so in this case as once again the details provided in the sender agreement are available in the Sender Adapter itself the sender agreement is not needed for the mail adapter when you have select option XIPAYLOAD.
    If you have selected XIALL then you need a sender agreement.
    Regards
    Bhavesh

  • Problems using access control in sender agreement for SOAP adapter 7.1

    I am trying to use Access Control Lists to restrict user access to web services/interfaces which are exposed via PI. This can be configured via the Integration Builder Directory using the u201CAssigned Usersu201D tab of both Communication Components (Business System) and Sender Agreements.
    The configuration is via the above mentioned components. However, I understand that itu2019s the adapters which at runtime are responsible for actually applying these checks.
    I have been having problems getting the access control to work using a setup involving a SOAP adapter of type SAP BASIS 7.10.
    The symptom of the problem is that although the access control works as expected at the Business System level, any settings at the Sender Agreement level appear to have absolutely no effect whatsoever.
    I have confirmed that I have no problems if I use an adapter of type SAP BASIS 7.00. However, I really need to get this working on 7.1.
    I have looked on the SAP support portal but can not find any notes that relate to this.
    Has anyone else had a similar problem? And have you found a fix for it?
    Any suggestions would be welcome.
    Edited by: Malcolm Dingle on Jun 17, 2009 1:08 PM

    Hi Shai,
    Please have a look at the following link and see if it helps you .
    It deals with SOAP adapter installation and activation 
    Re: SOAP adapter installation and activation
    Best Regards
    Edited by: Prakash Bhatia on May 8, 2009 11:51 AM

  • Problem with Sender Agreement for EDI File to Idoc scenario

    I'm configuring PI for EDI with Seeburger Adapter (Calling as a Module) and I'm having an issue with the Sender Agreement using File Adapter.
    Process used is File to IDOC. EDI data will be picked up from VAN (Using existing FTP process rather than using Seeburger FTP) and stored in a folder which is being accessed by PI  to send to R/3 to create orders.
    All my inbound EDI will be stored in same folder which should be picked up by XI and distribute the same depending upon the respective scenario's in ID and respective mapping/config in IR.
    The whole process IR & ID works fine and also creates Idoc in R/3, if I configure for one customer for EDI 850, but when I try to configure for second customer for same EDI 850 having same ANSIX12 version (V4010) as previous customer, I get stuck at the Sender Agreement part for this second customer because I use the same CC for File read for both the customers (Scenarios) and since there is a limitation with File Adapter "sender channel must not be assigned to more than one sender agreement ".
    How can I create the Sender Agreement using the same CC for my other scenario?
    I tried creating multiple CC for different scenario but when I place a test file for customer A, I see that its being picked up by both CC's.
    Pl Advise.
    Thanks!
    PSR

    You need to configure splitter as module in sender file adapter (classifier->bic->splitter) as well as define a message splitter(with partner number and Seeburger mapping) in Seeburger workbench.
    Thank you for the reply Aamir,
    Do you have any document which can guide me through the process?
    Does Seeburger Workbench play any role here? because I'm not using See FTP adapter to connect to my VAN. We get the data from the VAN using FTP process but not using See FTP. I'm using BIC to generate an XSD and SDA file, rest everything is in XI using File to idoc and IDOC to file process.
    Thx
    PSR

  • Sender agreement & communication channel not needed in case of IDOC adapter

    Hello everyone ,
       I am new to xi , as far as i know a communication channel cannot be created in ID when using IDOC adapter , the answer for this question is like , the idoc adapter resides on the integration server & not part of j2ee AF .
    Can some one explain me in the terms of a laymen , its not clear to me.
    Thanks & Regards,
    Reena.

    Hi ! Reena
    IDOC adapter resides on Integration server, so Integration engine takes care of the conversion format from IDOC to XML, hence there is no need for sender Adapter .Also since its residing on Integration server you can directly post the message in the Integration engine.
    well lemme explain a little bit,the main reason for sender agreement is to associate namespace with the sender adapter,now when we shoot IDOC from R/3 it already contains its standard SAP namespace so no need of sender agreement.
    now comes the sender CC,main use of sender CC is to identify the sending system and the adapter.the IDOC header contains details of all the this,so again there is no need for sender CC
    loook at this thread discuss the same
    Re: Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sende
    Re: why HTTP & IDOC adapter do not require sender communication channel?
    Thanks!!
    Questions are welcome here!!
    Also mark helpful answers by rewarding points
    Regards
    Abhishek Agrahari

  • ** Sender Agreement is required for RFC but not IDoc, XI, & HTTP.. Why ?

    Hi Friends,
    All we know that since IDoc, XI adapters running on Integration Engine (SAP WAS 6.40), Sender Agreement is need not required.
    Since RFC is proprietary document for SAP like IDoc, why we are creating Sender Agreement for RFC adpater ? (We know that RFC adpater is running on Adapter Engine, so that ...). Some of our guys asking me this question.
    Why is this difference (IDoc adapter running on Integration Engine & RFC adapter is running on Adapter Engine) ? Anyboday can clarify the exact reason on this ...
    Kind regards,
    Jegathees P.

    Hi,
      RFC Adapter:
        RFC adapter can abe to  manage metadata while using the Jco call.This turns the RFC data to RFC xml message.
    IDOC Adapter:
       But Loading the metadata for IDOC we should create a port and rfc destination.IDOC adapter and metadata container placed in integration server before and after the pipeline step.metadata container converts the IDOC to IDOCxml.IDOC adapter converts the IDOC xml to native xml format.Using idx2 we uploaded the IDOC metadata with the help of RFC destination and port.
    Regards,
    Prakasu.M

  • ERROR in PI : No sender agreement found for , , , , ,

    Hello everybody,
    i'm working with SAP PI 7.1
    it's a new installation.
    I created the first easy interface JDBC-Pi-File.
    when i activate the CC i don't see any message in SXMB_MONI but in RWM i see the messages in Waiting status and when i look inside i see the follow error:
    SOAPFAULT received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BS_CSIS_DEV, http://xxxx.com/test, SI_DB2SP_DOCUMENTS_AA_02; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BS_CSIS_DEV, interface namespace http://xxx.com/test interface SI_DB2SP_DOCUMENTS_AA_02 No sender agreement found for , , , , ,
    1-Configuration is ok. I create all steps and sender Agreement exist
    2-end point http://yyyyy:50100/sap/xi/engine?type=entry is correct and the same in SLD and sxmb_adm -> Integration Engine Configuration
    3-i suppose 50100 port is correct because when i try to use 8010 port i have a different error.
    4- i alreadi used CPA cache refresh and SXI_CACHE.
    Any suggestion?
    thanks

    after 20 minuts i retry.
    Now the error message is changed:
    Transmitting the message to endpoint http://yyyyyy:8010/sap/xi/engine?type=entry using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection refused.
    Edited by: apederiva on Aug 25, 2010 11:35 AM

  • Issue with WSDL created for sender agreement

    Hi,
    Can you please help me why I am getting the erroe with WSDL that has been created from directory Sener agreement in PI 7.1 EHP1?
    My interface is a SOAP to file ASYNC scenario and we have been given 5 XSDs that are referencing one each other ,5 XSDs are imported successfully and referenced properly,no errors/issues found.
    Created all ESr and directory objects and I tried creating WSDL from sender agreement for my Source/outbound inteface that is created with XSDs in ESR.
    When I try to import WSDL into SOPA UI to validate ,the import process stuck for ever while trying to import "http://www.w3.org/2001/xml.xsd" and finally throws me error.
    After that I tried importing WSDL created in Directory into AltovaXML spy to created the webservice request,I am getting the following error""invalid XML Schema:"xml:lang" is already declared in the schema dcument C:|..my WSDL.
    Even our partner who wants to make Webservice calls using this WSDL,they are not able to develop their Webservices they are getting errors something related to schema not found /not defined etc.
    Please let me know,what might be the issue?I verified several times with my XSD imports and referencing properly and configuration objects.
    Thank you for your help in advance.
    Regards,
    Prem

    Hi Mark,
    I am not getting issue while displaying/Exporting  as WSDL in ESR.I am getting issue while trying import WSDL that is generated out of Service Interface into SOAP UI or Altova XML Spy.
    I don't think PI created the WSDl out of W3 standards.
    This is the error I am getting in XML Spy:
    File C:\Documents and Settings\Prem\Desktop\SI_XYZ_O.wsdl is not valid
         Invalid XML schema: ''xml:lang' is already declared.
              Error location: schema / attribute++
    and in SOAP UI:It is trying to import the WSDL and it stuck for ever while trying to import http://www.w3.org/2001/xml.xsd and never imprts the WSDL into SOAP UI project.
    Please let me know,if you have any ideas.
    Thank you,
    Prem.

  • Routing error for HTTP to JDBC scenarion

    Getting following error: please advise.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Technical Routing
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
      <SAP:P1>-BS_POC_TEMP_Sender</SAP:P1>
      <SAP:P2>-POC_DB_Temp_Receiver_Channel,http://xys.com/xi/projects/syn/n1.IM_POC_TEMP_DB</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>No receiver agreement found for sender -BS_POC_TEMP_Sender to receiver -POC_DB_Temp_Receiver_Channel,http://xys.com/xi/projects/syn/n1.IM_POC_TEMP_DB</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

    Hey
    Check the URL you have provided the sender system for HTTP.then check if you have configured receiver agreement/receiver determination for that combination of sender and receiver
    The messages which is coming in sxmb_moni is unable to find any receiver side configuration for the sender attributes( like sender party/service or sender interface name).
    Thanx
    Aamir

  • Concepts and Integration Directory ( Channels/Sender agreements)

    Hi All,
    I have one question on the concepts and Configuration for the Run time scenario in XI.
    I am new to XI.
    I am done with the designing interfaces, Communication channels (adapter types for outbound and inbound) and the integration scenario.
    For the <b>Interface mapping</b> Communication channels are assigned.
    In the Integration scenario, Mapping defined above is assigned.
    Now in configuration, I imported the scenario and generated the configuration Objects.
    Do I have to define communication channel again here for the collaboration profile?
    Why is the communication channel coming again here?
    Also what is the sender agreement for? When should I define it? If possible any example?
    Please help me.
    Regards,
    Meher

    Hi All,
    First of Let me thank all for your responses.
    I have defined File adapters for sender and receiver through <b>communication channel Template</b> in the Builder.
    Now when I import the <b>Integration scenario</b> and create the configuration objects, Communication channels are not getting created from the template. ( In the Connection phase)
    When I click on generate <b>Communication channel automatically</b> in the Connections Step a <b>Http connection Channel</b> is created instead.
    Should I have to create these manually or will the template server my purpose to import in the configuration?
    Regards,
    Meher

  • Is associating communication channel to sender agreement necessary

    Hi,
    Is it necessary to associate communication channel to sender agreement to pick the message from the specified source directory

    Hi Santhosh,
    To pick the message from sender side , sender agreement should be required, thre are some cases where we dont need the sender agreement for IDoc Adapter and HTTP adapter. bcz these two adapters are resides on Integration server.
    See the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/db/73e03fc2269615e10000000a155106/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/45/2c1640033ae569e10000000a155106/content.htm
    Regards
    Chilla

  • Sender agreement not updated in XI cache after commit

    Hi all,
    somehow none of my created sender agreements appears in the XI cache after commit. I also did a complete refresh of the XI chache.
    Any ideas?
    Thanks!
    Denis

    Hmm,
    I have created sender agreements for SOAP channels, this would explain why I could not see the agreements...
    Actually I am wondering why the 'test configuration' tool in the ID brings up an 'java.io.IOException' in the receiver determination. Prior to that the sender agreement lookup fails. So I thought it's the XI Cache...
    I restarted the J2EE engine but the problem remains.
    Any other ideas?
    Thanks so far!

  • No sender agreement configured in the XI Integration Directory

    Hi,
    I am using MPA(MML) message format in XI scenario. My scenarios are R3->XI->Marketplace and Marketplace->XI->R3. The first scenario works fine with no problems where as when i try to post MML message from marketplace to XI system, i am seeing the "No sender agreement configured in the XI Integration Directory for the given message header:SenderParty=xxxx; ReceiverParty=; SenderService=xxxxx; ReceiverSerivce=xxx; Interface=xxxx; InterfaceNamespace=xxx;". I have created sender agreement for this secenario, and moreover i haven't this sender agreement in the xi cache. Please let me know if i am missing anything in the configuration.
    Thanks & Regards
    Sruj

    Thanks a lot for replies, but i have tried all these options but no luck. Does it need any additional configurtion to resolve this issue, i dont think this is cache issue, if that is the case after all steps which i have done should have fixed it. Please post your comments.
    Once again thanks a lot for everyone.
    Thanks & Regards,
    Sruj
    Message was edited by: Srujan Gogineni

  • Sender agreement error

    hi,
    we have two XI systems connected using XI adapter. I am observing a strange behaviour in a case where a file was processed, mapping was done and finally one XI is trying to send it to other. The error being reported is about sender agreement but in the call adapter version of message, in the IE.
    Error in sender agreement for party , service XXXXX , interface namespace XXXXX , interface XXXX No sender agreement found for , , , , ,
    Any pointers?
    Rgds,
    Amol

    Hi Suraj,
    that is not the case. XI1 is aware of what is being done and the fact is actually this has been working fine for last 1.5 yrs but started giving this error all of a sudden.
    Do you know if SLD related changes could have such kinda weird impact?
    SOAPFault received from Integration Server. ErrorCode/Category: XIServer/IN
    here the thread owner mentions that the issue was because of some SLD issue.
    R/
    Amol

Maybe you are looking for

  • HOW to get Windows 7 installed on HP Pavilion 15 15-E028US 15-E1X73UA E1X73UA / E028US

    Im just posting this to save the agony i went through trying to find correct windows 7 64 Bit drivers. hopefully this will save many people time since alot of people downgrade from windows 8 to windows 7. This is how i got Windows 7 installed on the 

  • How to send a photo to a forum full quality

    HI: Pardon my lack of knowledge but I recently got back into photography and joined a few photo forums, I would like to post some pictures but I am told that I need a hosting service like pbase which has a fee. I have a .Mac acount and use the iWeb a

  • File association error

    I have just installed (and repaired twice with a reinstall to be certain) PC Suite on XP SP2. When I click "File Manager", "Contacts" or "Messages" I get the following error. "This file does not have a program associated with it for performing this a

  • PPT on SD process flow

    Hi guys am in need of help from u am not so clear about the SD process flow can anyone pls send me a PPT on SD process flow to my email id:- (<REMOVED BY MODERATOR>). thanking u in advance.. Regards Jino.

  • Can I merge an earlier backup profile with a current one?

    My PC had a big outage that required reinstallation of Windows 7. In the rush to get things restarted I re-entered email account details which started a new profile. I have a profile from before the outage and like to recover addresses and messages f