Sender File adpter --don't raise alerts when file does not exist in folder
Hi,
My Scenario is File --- >XI ---> SAP.
I must archieve the file after it got polled. and iam polling for every 60 mins, if the file does not exist,it is throwing an alert like "Could not process file '.file..xml: No such file or directory '
Is there any way i can avoid raising an alert if file does not exist in the source folder.
we are on XI 3.0 sp23?
Thanks
Srini
Hello,
Your Subject:
>Sender File adpter --don't raise alerts when file does not exist in folder
is contradictory to your question.
>if the file does not exist,it is throwing an alert like "Could not process file '.file..xml: No such file or directory '
> Is there any way i can avoid raising an alert if file does not exist in the source folder.
I know you want to say "Don't Raise alerts when file does not exist in folder". Correct me if I am wrong.
Some times it happens, when we write the right thing but it means something else and this is the reason many experts have replied, "how to raise an alert". So if you remove the word "Sender File adapter" from your subject then it will be easy to understand the exact meaning.
Regards,
Sarvesh
Similar Messages
-
Alert Category TestAlert1 Does not exist
Hi ,
I have BPM scenario where I am trying to send an Alert as email . But I am not able to receive that alert in my mail box .
I created a Custom alery Category . For testing I tried to send it through tranction SE38 , run "RSALERTTEST" and gave alery category and the alert got successfully triggered and i got email in my mail box .
But when I try to send the same Alert through BPM i am not able to receive any mail .
Then I check my alert in transaction "SLG1" where it shows me a error as Alert Category TestAlert1 Does not exist .
I am not able to understand exactly what is missing .
Thanks ,
SuvarnaHi Suvarna,
Just for additional info i am providing you the step by step procedure for alert configuration please go through it compare it what you have done and see if the problem still persist.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
The links below on Alert Management (ALM) will be of good help to you:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm">Forwarding Alerts to Alert Management</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm">Alert Management</a>
<a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Troubleshooting</a>
<a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Step by step</a>
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
Regards,
Abhy -
Hello Everyone,
How to update zero to a column value when record does not exist in table but should display the column value when it exists in table
Regards
Regards Gautam SAs per my understanding...
You Would like to see this
Code:
SELECT COALESCE(Salary,0) from Employee;
Regards
Shivaprasad S
Please mark as answer if helpful
Shiv -
I was trying to upload my written assignment for a class to attach it to an email. The document was in Microsoft work 2007 version. It would not attach it just kept saying that the file is invalid or does not exist. I downloaded explorer and that browser attached the file just fine.
Kaplan university online it is my assignment for school the url is kucampus/kaplan.edu it is for students of kaplan. I have never had this issue.
-
Substitute nulls for blank when row does not exist??
I am trying to put a query together to build a fixed width file. I am using rpad and using NVL to substitute for nulls. That seems to work fine until I have to do a multi table select. I run into a problem when the the id field in the customer table does not exist in the customer_addr table. The NVL works if the id exists and it does insert the blank for the null, but if the id is not there, then I get the null instead. How can I force the blank for the case where the row is not even in the second table without changing the data in the table?
select
rpad('MYDATABASE',20),
rpad(id,20),
to_char(updt_dttm,'yyyymmddHHMMSS'),
rpad(fname,40),
rpad(mname,35),
rpad(lname,40),
(select rpadNVL(a.addr1,' '),10) from customer_addr a where a.id = customer.id and a.addr_type = 100)
from customer
Thanks!Hi,
Welcome to the forum!
user1189388 wrote:
I am trying to put a query together to build a fixed width file. I am using rpad and using NVL to substitute for nulls. That seems to work fine until I have to do a multi table select. I run into a problem when the the id field in the customer table does not exist in the customer_addr table. The NVL works if the id exists and it does insert the blank for the null, but if the id is not there, then I get the null instead. How can I force the blank for the case where the row is not even in the second table without changing the data in the table?
select
rpad('MYDATABASE',20),
rpad(id,20),
to_char(updt_dttm,'yyyymmddHHMMSS'),
rpad(fname,40),
rpad(mname,35),
rpad(lname,40),
(select rpadNVL(a.addr1,' '),10) from customer_addr a where a.id = customer.id and a.addr_type = 100)
from customer
Thanks!Sorry, I'm not sure I understand the problem.
Is the problem with the last column in your SELECT clause?
(select rpadNVL(a.addr1,' '),10) from customer_addr a where a.id = customer.id and a.addr_type = 100)It looks like you're missing a left-parentheses between RPAD and NVL. If you're getting anything other than an error message, this is probably not what you're running.
At any rate, the scalar sub-query (the entire expression I quoted above) will be NULL if it doesn';t find any row. You need to apply RPAD and NVL to the results of the scalar sub-query, like this:
RPAD ( NVL ( ( SELECT a.addr1
FROM customer_addr a
WHERE a.id = customer_id
AND a.addr_type = 100
, 10
) I hope that answers your question.
If not, please explain more clearly, and be specific about where the problem is.
When you post output (or any formatted text) on this site, type these 6 characters:
(all small letters, inside curly brackets) before and after each section of formatted test. That's what I did above. -
BPMon Alert Reporting - Query does not exist on server
Hello,
I am stepping through the BPMon Alert Reporting Analysis SP05+ guide. I am creating a report and have maintained the details with the template 0SM_BPM_WT0001N. When I try to access or preview the report I am faced with the following error:
The requested query 0SM_BPM1/0SM_BPM_Q0005N does not exist on the current server
Error when generating dataProvider
Any ideas?
ThanksHi Christoper
Another thought is, re-activate BPMon BW object.
Go to T-CD SOLMAN_SETUP -> Choose business process monitoring in left menu -> step 1.1
configure automatically. And execute all steps.
If you face some error due to BW job is nto running or something.
Then recommend re-execute BW job in SOLMAN_SETUP.
(Left menu ->Basic Configuration ->Step 5 configure automatically -> under the task you might see "Setup BW" so choose this and activate. Result of this, CCMS_BI_SETUP will run again. So chek whether there is active job in Sm37. After finish this job, try BPMon SOLMAN_SETUP that I mentioned above).
Best Regards
Keiji -
File Adapter to iSeries IFS "Configured source directory does not exist"
Good day, All
We are using PI 7.1
I need the PI file adapter to pull a file off of an iSeries(AS400) IFS folder directory.
I'm able to configure the file adapter to pull off files from the PI server C and D drives.
I'm able to configure the file adapter to pull off files from other network drives.
But the iSeries IFS folder keeps coming back "does not exist".
I've configured the Source Directory with / and with \ and it doesn't help.
I am able to navigate to the folder while logged into the PI server as the server admin.
I've tried mapping a drive on the server to the IFS folder but that doesn't work either.
Please help!!!
I've wasted too much time trying different settings on this already.
Any assistance would be greatly appreciated.
Thanks,
ChadDear Chad,
Please go through the following SDN link :
- Configured source directory .... does not exist was suppressed
give the write permisson to the directory for everyone group and check if that helps.
Also, kindly go through the following links :
1) http://wiki.sdn.sap.com/wiki/display/XI/TroubleshootingtheFile+Adapter (point 2)
2) Not able to read files from Windows directory to Unix Server using NFS
which might give some hints in solving your issue.
Best Regards
Nishwanth -
Some web sites allow files and free mp3 tracks to be downloaded by right clicking on an icon and selecting "save target as ...". But Firefox does not have this option. How do others handle this? I have had to go back to Internet Explorer to use this privilege.
== This happened ==
Every time Firefox opened
== Always been so for me.no it isn't........this option saves as an HTML document link. it does not download the file.
-
I removed Bing from my computer as I did not like it much. Since Google has now become such a useless piece of junk I decided to re-install Bing but each time I try I get the following message.
Quiote:
Firefox could not install the search plugin from "https://addons.mozilla.org/firefox/downloads/file/54407/bing-20090601.xml?src=category" because an engine with the same name already exists.
This engine does no show up anywhere on my computer except for an XML file in Firefox/searchengines. I have deleted them but it makes no difference. The files do not show in Tools\addons nor in about:config. Please don't tell me that Firefox is become as useless as Google...............I don't want to have to use IE.Bing should be installed as one of the default search engines (bing.xml in the searchplugins folder in the Firefox program folder)
If the file is there and you do not see it in Manage Search engines then click the "Restore Defaults" button to restore the default search engines.
If that didn't help then delete the search.json file and a possible search.sqlite file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
It then goes on to say, check path and try again. I created the file path and soon realized that it changes the name of the path each time.
Example path:
c:\\Users\Karen\AppData\Local\Temp\7zSCAD.tmp\setup.exe
Running windows 7, 64 bit and was trying to download the new Firefox 7. When that didn't work I tried an older version and received the same message.
I loved Firefox on my old computer which was running XP. I hope that there is a fix for this.
Thanks!
KarenThanks for the help...worked like a charm! :D
-
Why is Apple sending an email to an address I can't find in my account??
Agro1 wrote:
Why is Apple sending an email to an address I can't find in my account??
Apple will not send you password reset requests in an email. It is likely a phishing email trying to get your personal or security information. Ignore the request and send the email to trash. Do not provide any personal or security information in response to the email. Do not click on any links in the email. -
Query rewrite complains about ragged hierarchy when it does not exist
Hi -
I have a customer dimension with only one level. The lowest level of detai.
When I enable the query rewrite I get an error (see below) about ragged or skipped level hierarchy in my customer dimension. I am trying to figure out what the issue is so I created a one level customer hierarchy (lowest level) and I still get the error.
I do not understand how I can have a skipped/ragged hierarchy when my dimension is at the lowest level.
I am using the lastest versions of AWM and 11G.
Thanks in advance for any help you can provide,
Frank
Invalid Metadata Objects:
Invalid Object "MYTEST.CUST_SALES": "XOQ-01957: The cube has REWRITE MVs and also contains either a ragged or skip-level hierarchy. The hierarchy is "MYTEST.CUST_DIM.STANDARD"."
Edited by: bmwrider on Oct 16, 2009 9:01 AMHi there,
See this:- Error when trying to enable cube MV query rewrite
Thanks,
Stuart Bunby
OLAP Blog: http://oracleOLAP.blogspot.com
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html -
Get performance when key does not exist
Hello,
I am using BDB version db-4.5.20. I try to get an object which is not present and the performance of this call is extremely slow. The newer versions have an exists call for the key. How can I get better performance in this case. I am using HASH as the underlining DB format.
Do let me know if you need any more information.
Thank you!Hi,
If your keys present a locality of reference (accessing a particular key in the Btree is likely to be followed by an access of keys located "near" that key as per the defined sort order) then you'll probably be better of using Btree. Here is information on how to select the underlying access method:
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am_conf/select.html
For the Hash access method there are several configuration options you can play with: the hash key comparison function (as of BDB 4.6), the hash function used to distribute keys, the hash database page fill factor and the estimated number of elements that will be stored in the database. Information on these can be found here:
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_h_compare.html
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_h_hash.html
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_h_ffactor.html
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_h_nelem.html
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am_conf/h_hash.html
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am_conf/h_ffactor.html
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am_conf/h_nelem.html
Regards,
Andrei -
"the path does not exist" error opening shared adobe files on XP machine
We recently upgraded a mac mini from Tiger (10.4.11) to Leopard (10.5.X) we updated to the most recent 10.5.
We have an office with 3 macs and 1 XP.
All users connect to the Mac Mini via SMB sharing.
Everyone Authenticates as the same admin user.
*The XP machine can open and save all file types EXCEPT Adobe Photoshop and Illustrator files.*
They are using CS3.
The mac and XP users could open save and share all files prior to the leopard update.
We used the "Archive and Install" option to upgrade to leopard.
The shared files had the "unknown Group" error which we solved by adding them to the ADMIN group. This step changed the error message the the XP user was receiving.
I have tried many networking fixes, including group policy on windows, turning off IPv6 on the Mini, but we cannot open or save files directly from Illustrator.
When the file
We can move files to the XP desktop then open and save. Files saved on the XP machine can be moved back to the mini and opened directly by all of the Mac users.
Any guesses why this might be occurring?There are actually two separate error messages received by the windows user when trying to open files off of the Mini.
"the path does not exist" and "this file cannot be found".
This happens when we navigate directly to the file with windows explorer. -
ChaRM class java.io.IOException:The file does not exist on the filesystem
Hi All,
We are implementing ChaRM with Portal. While deploying we are running into following issue.
Deployable-Id:/usr/sap/trans/data/GPSK90001B/sktp14_20100806_095633.epa
Returncode:'12'
class java.io.IOException:The file (/usr/sap/trans/data/GPSK90001B/sktp14_20100806_095633.epa) does not exist on the filesystem.
Any suggestion.
Regards,
SmitaWe resolved this issue by sharing the trans file across SolMan and Portal system.
Maybe you are looking for
-
Global Variable in Essbase unable to pull up dimension structure
Hi! I have created a global variable in Essbase using which I want to select a dimension member in a Business rule. While trying to create the global variable in Essbase though, I cannot pull up the dimension structure in the Limits or Default value
-
All, I have 2 dimension tables and 1 logical fact table a01_bi_agency_interest_dim a01_bi_dsk_central_file_dim tier2_facts 1 Complex Join in Physical Layer A01_BI_AGENCY_INTEREST_DIM.MASTER_AI_ID = A01_BI_DSK_CENTRAL_FILE_DIM.MASTER_AI_ID AND A01_BI_
-
Making ejbs in an ear file available in studio
I have an ear file which has some ejbs which I am deploying as an application along with WLI application on WLS. Is there a way to see all these ejbs in the BPM studio for Business Operations without moving the classes out of the ear file?
-
Hi, trying to watch Sky TV on laptop - installed Silverlight but error message says unable to watch Sky while in a private browser. Can I come out of this thru Firefox?
-
i reset my nokia e 72 by *#0000# after reset completetion its shown system error. keypad not working, no sim network, no usb cable connect. only 1 key (menu key) working prperly.