Alert Category TestAlert1 Does not exist

Hi ,
I have BPM scenario where I am trying to send an Alert as email . But I am not able to receive that alert in my mail box .
I created a Custom alery Category . For testing I tried to send it through tranction SE38 , run "RSALERTTEST" and gave alery category and the alert got successfully triggered and i got email in my mail box .
But when I try to send the same Alert through BPM i am not able to receive any mail .
Then I check my alert in transaction "SLG1" where it shows me a error as Alert Category TestAlert1 Does not exist .
I am not able to understand exactly what is missing .
Thanks ,
Suvarna

Hi Suvarna,
Just for additional info i am providing you the step by step procedure for alert configuration please go through it compare it what you have done and see if the problem still persist.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
The links below on Alert Management (ALM) will be of good help to you:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm">Forwarding Alerts to Alert Management</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm">Alert Management</a>
<a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Troubleshooting</a>
<a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Step by step</a>
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
Regards,
Abhy

Similar Messages

Category for service category S046 does not exist

Dear Experts,
This is regarding the Bdoc error "Category for service category S046 does not exist". ECC service materials are trying to replicate from ECC to CRM. In our scenario we doesn't required ECC service material in CRM. I have not downloaded service materials relevant data. Still i am facing the above error.
Please help to fix the above error.
Regards
Ashwini

Hi,
Thanks for your reply. I have maintained the filter on service_master object is not working.
I have not downloaded the service material from ECC to CRM.Then what could be the reason for the above bdoc error.
Please help me.
Regards
Ashwini

Sender File adpter --don't raise alerts when file does not exist in folder

Hi,
My Scenario is File --- >XI ---> SAP.
I must archieve the file after it got polled. and iam polling for every 60 mins, if the file does not exist,it is throwing an alert like "Could not process file '.file..xml: No such file or directory '
Is there any way i can avoid raising an alert if file does not exist in the source folder.
we are on XI 3.0 sp23?
Thanks
Srini

Hello,
Your Subject:
>Sender File adpter --don't raise alerts when file does not exist in folder
is contradictory to your question.
>if the file does not exist,it is throwing an alert like "Could not process file '.file..xml: No such file or directory '
> Is there any way i can avoid raising an alert if file does not exist in the source folder.
I know you want to say "Don't Raise alerts when file does not exist in folder". Correct me if I am wrong.
Some times it happens, when we write the right thing but it means something else and this is the reason many experts have replied, "how to raise an alert". So if you remove the word "Sender File adapter" from your subject then it will be easy to understand the exact meaning.
Regards,
Sarvesh

CR068 Work center category Z006 does not exist

In Customizing transaction 'OP40', I inserted the application 'N' (Networks) for setting the task list application of a work center category Z006 to be used in PS (Project System)
Three weks ago I used transaction CR01 to create some work centers with Z006 category to be used in networks of a Project with no problem; but now I want to create another work center with transaction CR01, and I get the error message CR068 Setting:`Work center category Z006 does not exist' although the work center category has been maintained.
This work center category was not deleted in customizing, I can see the last work centers created in table CRHD.
I followed the steps described in the SAP note 15657 - (Setting the work center category is not permitted) of course using the task list application N.
I would like to get some help.
Regards.
Rafael Di Giovann T

Hi,
Do you have authorization to see OP40 customization in that client, if yes, then kindly check and confirm whether configuration with respect to Z006 is still there in that client or its deleted/ overwritten with some valuable changes. The work center that had been created in past will definitely be there in CRHD table/ system irrespective of the configuration changes to their work center category.
Regards
Avisek Bhardwaj

BUPA BDoc Error "Tax Number Category IN0 Does Not Exist"

Hi,
I have a Bdoc error that I am working on.
The BUPA_MAIN BDoc has a error message "Tax Number Category IN0 Does Not Exist".
What object will be responsible in getting the Tax Number and Tax Type from R/3 to CRM?.
This Tax Type Category No 'IN0', does not exist in R/3 table TFKTAXNUMTYPE, But still it is coming in the Bdoc from R/3. Is there a possibility that this value exists in any other table. It looks like this 'IN0' is standard SAP delivered value.
There is also a note regarding this for you reference, Note no. 407719
Thanks in advance,
Reagrds,
Siva Vutukuri.

Hi Siva,
Go to transaction R3AM1 and check whether you have downloaded the object DNL_CUST_TAX or not.
Also you can maintain the Tax Number Category IN0 in transaction SPRO.
Follow the mentioned link below:-
SPRO->IMG->Cross application components-> SAP BP->BP-> basic settings-> Tax Number Categories->Maintain tax number categories.
Here you can maintain the category IN0.
After that reporcess the BDOCs.
<b>Reward points if it helps!!</b>
Best regards,
Vikash

BPMon Alert Reporting - Query does not exist on server

Hello,
I am stepping through the BPMon Alert Reporting Analysis SP05+ guide. I am creating a report and have maintained the details with the template 0SM_BPM_WT0001N. When I try to access or preview the report I am faced with the following error:
The requested query 0SM_BPM1/0SM_BPM_Q0005N does not exist on the current server
Error when generating dataProvider
Any ideas?
Thanks

Hi Christoper
Another thought is, re-activate BPMon BW object.
Go to T-CD SOLMAN_SETUP -> Choose business process monitoring in left menu -> step 1.1
configure automatically. And execute all steps.
If you face some error due to BW job is nto running or something.
Then recommend re-execute BW job in SOLMAN_SETUP.
(Left menu ->Basic Configuration ->Step 5 configure automatically -> under the task you might see "Setup BW" so choose this and activate. Result of this, CCMS_BI_SETUP will run again. So chek whether there is active job in Sm37. After finish this job, try BPMon SOLMAN_SETUP that I mentioned above).
Best Regards
Keiji

Work center category does not exist in CNR1

Hi,
While creating a work center through CNR1, I am getting the error 'Work center category 008 does not exist'. I checked OP40 and the work center category is maintained there. Also the category 0008 has application maintained as Recipes.
Let me know if I am missing anything here.
Thanks & Regards,
Soumya.

Hi,
I feel so. If your using the work centre category for project managment, then, application management will be assigned to N, then you can use CNR1, which is the T code to create work centre in Project management.
In the standard system, Work centre category for project management is 006.
Pl. try creating the work centre through CRC1 for process manufacturing.
Madhava

Subject Profile Category does not exist

Hi,
System: CRM2007
I have created a new subject profile Z* and assigned it to Subject Profile Category Y. When going to the next level (code group profile for Subject Profile), I get the ff. message:
"Subject profile category Y does not exist (system error)
Message no. CRM_SUBJECT_PROFILE001"
Why does it not work?
Thanks
Anke

Hi,
For which scenario are you using the subject profile??
If you are using it for service then please maintain the Subject Profile Category as "A-Service" while defining the subject profile.
Regards,
PePe

While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
Can you give an evidence that material 5 exists? e.g. screenshot from SE16 at table MARA, MARC and MAST

Alert Configuration : 404 Not Found The requested resource does not exist

Hi all ,
We are facing problem in Alert configuration and
Alert Inbox . We are on SP14 service patch
We are getting error as " 404 Not Found The requested
resource does not exist "
We have activated all the necessary services in
Tcode : SICF as mentioned in the config. guide
We have executed the program :
SXMB_ACTIVATE_ICF_SERVICES
We have referred the SAP note : 750287 and tried to
set the httpport as per the note but again we are
getting error as "The page cannot be displayed" .
We have checked the parameters in Exchange profile
for httpport as well as for host also .
Can someone please guide us on this .
Thanks
Shikha

Hi all ,
Thanks for the replies .
Shravan ,
I pinged my XI and is working . we have already added
the IP Address and the host name , but the same error
is coming .
Anirban,
Checked all the necessary services again as suggested
by you .
Andreas ,
> is to set the abap profile parameter
LOCALHOSTFULL to the fqhn.
Can you please let me know where to set the abap
profile parameter "LOCALHOSTFULL" as suggested by you .
Thanks
Shikha

Object Category CL_ABAP Class does not exist

Hi Experts,
When Iam creating a workflow tasks or template the object category CL_ABAP Class does not exist in drop down box. Only BOR Business object is appearing. Could anyone help me the problem and how to resolve it.

Jose,
Note: If you are in a 6.20 system and can't see the Object Category choice "ABAP Class", then you first need to execute report SWF_CATID to enable "ABAP Classes" as an available object category. It's already done for you in releases 6.40 and higher.
I am guessing you are in SAP_BASIS 620 version.
Courtesy:
This is from blog written by jocelyn dart of ABAP OO Workflow.
For more details pls check this:
/people/jocelyn.dart/blog/2006/12/19/using-functional-methods-in-workflows-and-tasks
Hope this will help.
Cheers
Jai
PS: Small correction report name is RSWF_CATID not SWF_CATID

Product category does not exist in logical system

Hello Experts,
Need help in understanding product category change behaviour.
Shopping cart created and approved.
PO created and approved.
Now PO change version created by changing product category.
Please enlighten me whether this change is really allowed on business perspective and SAP perspective.
So far we been told that there is business case to justify this change.
If allowed by SAP, then how do we solve the problem of error occuring in workflow "product category does not exist in logical system XXXX".
Please advise.
Thanks,
Gaurav

Hi
I dont have a system right now to check
1.are you ordering the item from external catalog? ( any mapping between catalog product category to SAP product category )?
2. after approved PO created.
3. Now BUYER could change the product category again?
4. why the BUYER takes push ups for REQUESTER . Let Buyer cancel the PO and ask requester to create a PO.
What is the business process existing in your business ?
Since product category determines purchase group and every thing like gl account etc..
Can you recreate the same issue in development box?
Note 1466155 - GL account not re-determined on change of product categorySymptom
You have an SRM PO with items having multiple account assignment. Go to the PO item overview OR to the item basic data tab and change the product category. However, this does not trigger a new GL account determination for the accounting lines.
Note 1407962 - Category is editable when contract is assigned in PO item
Symptom
When ever a Contract item (Free text or Product Category) is assigned to a Purchase order free text line item, The category modification is not allowed. This is because the product category is always copied from the contract item and overrides the Category for Purchase Order Item. It is confusing for the user as the category is editable and can't be modified.
SAP has different different behaviors . Kindly tell us what type you belongs too...

Country implementation 40 does not exist for category IT and type 2001

Dear Experts,
I am getting the following error
"Country implementation 40 does not exist for category IT and type 2001".
when I tried to create a leave request. I think the HR Ess configuration is complete.
Kindly, give your valuable inputs, hence I can try & resolve this issue, as I am stuck with this for quite sometime.
Your inputs will be really valuable.
Thanks
Bala

After suffering this same problem and not finding any help or information ANYWHERE, I debugged the process and found that the error is caused by a missing entry in view V_BLPTYPECOUNTRY.
I created a new entry in the view with a blank molga and the error goes away.
The entry I added was:
Category = IT
Data Typ = 2001
Ctry Grouping = (blank)
Class = CL_PT_BLP_IT2001
I hope that this can help anyone having the same problem in the future.

IW32 - Capacity category does not exist or cannot be selected

We are getting the bellow error upon exiting IW32, could you please tell us how to resolve
Capacity category does not exist or cannot be selected
Message no. CY374

Hello Ehsan,
This message also appeared for the first time after we applied EHP5, a note has been released regarding (Message CY374)see SAP note 1547467 for resolution and implement note 1504266 .
regards
Spencer

Subject profile category does not exist CRM_SUBJECT_PROFILE001

I have configured charm in our Dev system.
In transaction solution_manager ->change request management-> create
I get the following message:
Subject profile category does not exist (system error)
Message no. CRM_SUBJECT_PROFILE001
Did I miss something in the configuration?
I configured a test system some time ago and did not have this issue.
Thank you!

Answer found, note 898614

Alert Category TestAlert1 Does not exist

Similar Messages

Maybe you are looking for