Sender RFC Adapter , Sender File Adapter - Payload Compression

Sender RFC Adapter or the Sender File Adapter compress the payload of any spaces in between the tags or remove any spaces at the start and end of the payload.
We need to pass the spaces as is in the message payload to the receiving system?
Is there a way to do it in PI 7.1.

Hi Vikrant,
Preserving white spaces while reading a file from FTP
NameA.fieldContentFormatting
- Enter trim to remove all the leading and subsequent blanks for a value found. This is the default.
- Specify nothing to ensure that the value remains unaltered.
For RFC you need to check your payload to see whether spaces are coming from R/3 itself or not.
Regards
joel

Similar Messages

The same filename from a sender to a receiver file adapter - SP14

Hi Expers,
I Have Gone through the link which is given bu Michal.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Here My Questions are.........
1.Should we give any file name in the receiver side Adapter in this scenario.?????
2.How wil be the Sender and Receiver Communication channel Parameters????
What Are they???????
Please Clarify me...
Regards
Khanna

Hi Rajesh,
Is your query related to sending the file name from the source xml document to the reciever file adapter. If so this can be achieved.
Pls. do the following.
1. In the mapping program that you are using populate the filename coming from the source into the target root element.
2.Sender adapters can write adapter-specific attributes to the message header; these can then be evaluated at configuration time
3. To change the adapter-specific attributes of the message header by using message mappings, you access the required classes of the mapping API by using a mapping runtime constant.
Note: You donot need to specify any filename in the receiver communication channel.
To access the classes DynamicConfiguration and DynamicConfigurationKey by using the mapping runtime constant DYNAMIC_CONFIGURATION, use the method getTransformationParameters() of the container object.
Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
You donot need to hard code the value of the filename in the file adapter for your interface.
In SXMB_MONI, when you see the pipeline services you would see that the value of the filename is populated in the message payload.
Thanks
Indranil

The same filename from a sender to a receiver file adapter

Michal has provided us with a brilliant <a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14. I guess a lot of people have been waiting to do this. However, I have a slightly different scenario. In this case, XI is used as a medium to transfer a PDF file from one directory to another directory. There is not transformation or mapping involved.
The message is send by File Sender Adapter and received by File Receiver Adapter. Message type is created as a simply type hexBinary. The file is supposed to be picked up as a PDF and received as a PDF, retaining the same file name. As such, the file name is neither stored in the source structure nor the target structure.
Once the PDF file is transfered into target directory, it should be able to be open by using Acrobat directly without further conversion.
We might add a file name file into the target structure but would that rendered the PDF non-readable upon being received by the File Receiver Adapter?
Any feedback is highly appreciated.

Hi
>>We might add a file name file into the target structure but would that rendered the PDF non-readable upon being received by the File Receiver Adapter?
No, adding file name would not hamper the properties. You can name *.pdf or something else.
For that matter any file pdf, word, .msg format etc can be transferred by this approach. We have tried it.
Earlier to SP14 you cannot give the same name to outgoing file without writing a Adapter module. But things are easy with SP14.
Cheers,
satish

Problem: The same filename from a sender to a receiver file adapter - SP14

Blog : /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
My Problem:
The thing works for me and i am able to get my input files name as my output file name. But one thing i noticed is that in my target message, the field where i have mapped the code it always returns the value "null" but finally when the file is created i get the required result.
My input file name is input.txt and i get the same name in my output file too.
In sxmb_moni if i check DynamicConfiguration link i see the following
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30">
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFTPHost">10.25.116.98:21</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">/input/test</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileTimestamp">20060228T112200Z</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">bin</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">input.txt</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileSize">770</sap:Record>
</sap:DynamicConfiguration>
But when i check my mapped field i see
<field3>BodyC</field3>
<keyfield>02</keyfield>
<field5>BodyE</field5>
<field6>BodyF</field6>
</Body>
- <Trailer>
<keyfield>03</keyfield>
<field2>null</field2> -> Null value instead of input.txt
</Trailer>
</ns0:MT_Putfile>
The code i have used to map the field2 of the trailer is the following ....
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileType");
String valueOld = conf.get(key);
return valueOld; 
Any clues ?

Gosh this is spooky
Anyway i tried with that line of code but it throws me an error during activation ...
Activation of the change list canceled Check result for Message Mapping mm_IS | http://t-systems.com/Shabarish: Starting compilation Source code has syntax error: /usr/sap/TXT/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map387c7300a9ac11da9d280011256afae8/source/com/sap/xi/tf/_mm_IS_.java:104: cannot resolve symbol symbol : method getTransformationParameters () location: interface com.sap.aii.mappingtool.tf3.rt.GlobalContainer DynamicConfiguration conf = (DynamicConfiguration) container.getGlobalContainer().getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION); ^ 1 error
The code is :
DynamicConfiguration conf = (DynamicConfiguration) container.getGlobalContainer().getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//String valueOld = conf.get(key);
String valueOld = conf.toString();
return valueOld;
Thanx Renjith so far .. but i hope this gets resolved (else i will loose my sleep thinkin abt the situation)

SRFC-adapter and file adapter with error: no adapter found

Hello,
we have two scenarios here in an XI 3.0 SP12:
First scenario connects two R/3 systems via RFC adapter (outbound / inbound) for an RFC in a standard R/3 function module SUSR_ZBV_GET_REMOTE_PROFILES.
The RFC is synchronous.
Second scenario uses file adapter to send file from A to B.
When starting the RFC call from the sender system the error message in area "call adapter" for XML message in the trace is "exception while reading from SLD:Property sap_xiadapterservice.adapterType does not exist".
Message in RWB:
"Transmitting the message using connection http://abc038.ceu.test.com:8077/sap/xi/engine?type=entry failed, due to: XIServer:AE_DETAILS_GET_ERROR:Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines."
Same problem for file adapter!
Here is the message from the file adapter error log entry in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.kx1.test038</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.kx1.test038</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Looks like an identical problem for both adapter.
What we have done (checked) so far:
- SLD connection is working
- Vis.Admin.: no problems found
(SAP RFC adapter active, file adapter active)
- Component monitoring: no errors, adapters are fine
- all rfc connections checked: ok
- have checked user and pwd and replaced to be sure
- cache refresh: ok
- reimport of SWCV to IR for RFC: done, no result
Does anybody have an idea, how to get rid of that?
Best regards
Dirk

Hello Udo,
in Adapter monitoring all adapters are listed and per adapter (here RFC and FILE) all adapter entries from the scenarios are available (sender / receiver comm. channel entries - in green)!
Pipeline URL in SLD Bus. Syst. is fine ( and an IDOC adapter scenario is running successfully) !
I think this is a really tricky one!
Best regards
Dirk

JCBC Adapter and File adapter not processing messages

Hi
I noticed that messages are being delivered to Adapter engine and the same are visible in Runtime Workbench with status "to be delivered". But, JDBC Adapter and File Adapter not processing these messages.
Any idea where I can find the problem?
I was able to re-deliver successfully via the JDBC Adapter using the MessagingSystem GUI using XISUPER user.
Regards
Chandu

Hi,
1.Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Regards
Agasthuri Doss

Small problem in sending chinese charaters using file adapter

Hi,
Actual scenario is,
Sender system -> file adapter -> XI -> ABAP Proxy -> Receiver system.
error is occured when the data reached the XI.
                                                                                1. The data file contains Chinese characters (Unicode).
2. When file adapter reads this file, the data in the payload no longer
    shows Chinese characters.
Can you please help in this regard...
Thanks,
Surya.

Hi,
Actually i am sending an EXCEL sheet which contains chinese charaters to XI using sender file adapter.
When file adapter reads this file, the data in the payload no longer shows Chinese characters.
what i need to do?
SUrya...

Sender communication channel with file adapter

Hi All,
 Here i am facing some error with the communication channel in which i have used FILE adapter. Here i am using PI 7.0. Here i have configured the communication channel. but i didn't checked the "operating system commands". and i checked the " adapter specific message attributes". i dont know whether i have to check these adapter specific message attributes or not. When i have gone to runtime work bench there i saw in adapter monitoring. there it is not showing any error. but in communication channel monitoring it is showing that it is having -
"processing errors" but i am not getting where will be the error.. Any new ideas will be appreciated.
Thanks in advance,
Ramana

Hi Bhavesh and Aaron,
 Here i viewed the XMl format of the sender file in the mapping. there i found the difference between the file i am trying to pick up by the adapter and the XML instance of the sender interface in mapping. The difference is there in the message type of the <ns0> tag the file i am trying to send is having one message type and name space, where as the XMl instance is having the other message type and same name space.
 i think that will the problem in processing my file. i am not sure about it.please any of you confirm that if it is th processing error i am facing or not.
 Thanks for your efforts.
Regards,
Ramana.

Abap Proxy to Send RFC data -- xi - File , how to do - pls help ?

Hi Friends ,
 Our scenario is once in day an RFC is to be triggered and create flat file .That RFC will return data .
 Using below likns i have configured the RFC Sender adapter
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
First Activate the ABAP Proxy?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
How to implement a Client Proxy?
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
My question is
 1. Is it possible to use ABAP Client proxy to achive this ?
 2. Then do we need to write RFC Call in side this proxy call ?
 3. If we go for proxy do we need RFC Sender Adpater ?
 I am little confused can you please explain , as how it works ?
 Is there is any other way to trigger RFC to send data ?
Regards.,
Shyam

Hi sabrish ,
 Tahnks for ur reply. I was waiting for ur response . i have doubt
the foloowing code i got from ur blog .
REPORT Z_TEST_RFC_XI_WEBSERVICE.data: lv_distance type char10.CALL FUNCTION 'Z_WEBSERVICE_TEST_SHABZ' destination 'Z_WEBSERVICE' EXPORTING FROMZIP = '12222' TOZIP = '22222' IMPORTING DISTANCE = lv_distance.write : 'Distance is : ' , lv_distance.
 1. i have to generate proxy from Out bound interface right ? inside that proxy class whare i have to in clude the code to call rfc ?
 2. Can u please tell what is the Destination in that report. What is z_webservice ?
 3 . Do we need to use RFC Sender adapter ? It is not related to proxy right ?
Regards.,
Shyam
null

SOAP adapter or file adapter

Hi Gurus,
Non-SAP system B ->PI->Non-SAP system A.
The request is sent from non-SAP application A to Pi and this is routed to another non SAP system sap example SYSTEM B.
Then B sends the response in the form of XML file to Application A via PI.
This is sysnchornous interface. Is it possible to use file adapter on both sender and reciever side in this snchrnous interface.
or do we need to use teh SOAP adapter on both sides to allow communication between the two system webservices or HTTP post method.
Please suggest all the possible options.
Any help appreciated.
Thanks,
Jay.

>Is it possible to use file adapter on both sender and reciever side in this snchrnous interface.
Since it is synchronous interface, I would recommend you to go SOAP adapter on both sides. That is one possible way.
The second possible way is one end file and other end soap(synch) and the response goes back to file adapter. This is file -> SOAP->file.
refer this [link|http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File(Without%20BPM)]
Replace SOAP with RFC.

What kind of data is taken from mail adapter to file adapter

hai
i am learning mail to file adapter can u tell me in real time where it is use,
well what data we will transfer from mail to file.

sandeep,
we are using the sender mail adapter to receive mails (IDOCS) from a Exchange server
when a sales person gets PO thrugh mail then he sends this Po to Mainframes then we use mail to file.
similarly we can have many situations to useit.
Message was edited by:
Sreeram Reddy

Adapter Framework File Adapter Message on hold

Hello,
we have a problem with the Adapter Framework and their the File Adapter / Messaging System.
We process one HR IDOC from R/3 through XI and send it to 7 file adapters. The SXMB_MONI tells us that all messages have been processed without errors and when you go to the RWB and use the Message-Monitoring many messages are on status HOLD. XI makes the message EOIO once you have multiple receivers and something blocks the messages in the AF. Is there a way to delete the AF queues like the XI queues with SMQ1 or SMQ2. It looks like SAP had duplicated the SMQ business in JAVA but I found no documentation how to clean up queues or what to do if the get stuck.
Thanks
Stefan

hi,
you can try question 3 adapters section
on the XI FAQ:
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
to see adapters in RWB
but if you see them when you do it then
it means that this XI's configuration was not complete
so you may expect further problems
Regards,
michal

Need help with a simple process with FTP Adapter and File Adapter

I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jay

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

Unzip attachment in Mail adapter or/ File Adapter

Hi everyone,
I need to get flat file from .zip attachment that comes with mail? Is it possible to get it with Mail adapter, unzip it and then make conversion? All steps in the Integration engine?
Another option can be get .zip with File adapter, but again how to unzip it?
Thanks,any help appriciated as I am doing my first XI project.
Nataliya

>
Buffy76 wrote:
> Thanks a lot, guys. Unzipping is clear now.
>
> Prateek, it would be great if you can you point to "how-to" file or example for MessageTransformBean.
>
> Regards,
>
> Nataliya
ref this https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05

False Error in the Adapter Monitor/File Adapter

I have a receiver file adapter that is showing a 553 Permissions error when the file is actually delivered. This shows up in the adapter monitor and the message monitor.
I've been looking around but I couldn't find anyone who had this problem.

Hi Mark,
I think this error is because of Spaces/or and Invalid Characters like -!"£$%^&*'#... in the file name.
Just check it. ARe you using FTP server ? or NFS ?
If it is FTP then also check that user has a file write permission in the FTP server
>>Also this may be because of you don't have righ to write the directory/file(file permissions) with the name already exists i.e overwrite rights..
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Diff between Seeburger Adapter and File Adapter

Hi All,
My company needs to interact with some banks and the banks are particular that they want SFTP, which is not supported by File Adapter, so we have decided to go with Seeburger adapter.
Now what are the differences between File adapter and seeburger adapter?
I believe that Seeburger adapter does not support File Content Conversion, Archiving etc.
Could you all pls put some light on the diff between file adapter and seeburger adapter when it comes to dealing with files?
Xier

Hi
You are aware with working of File Adapter.
The most direct way of using the Seeburger adaptors is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to
1. Define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. Using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. Create a one to one mapping between input en output.
4. Export the metadata in xsd or sda format for import in XI
5. Generate an SDA which can be deployed in XI and used as a module.
Have a look here,
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Some Seeburger related information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e2aeb02c-0601-0010-d680-c9be61ffa390
Go through this threads:
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Need Material on Seeburger Adapters.
Seeburger Adapter
Installing seeburger adapter
http://www.seeburger.com/xi-adapters/
Thanks

Sender RFC Adapter , Sender File Adapter - Payload Compression

Similar Messages

Maybe you are looking for