Sending 2 messages from SAP but get 1 message in PI

Hi all,
This is a bit of a strange one but I have the situation where we send two idocs at the same time from a SAP ECC system to PI. The first idoc is processed but the second one just dissapears. Things I have checked:
SMQ1/SMQ2 on both systems - nothing there
Runtime workbench - the successful one is there but no failed messages
Sending two messages from another ECC system - we do get both messages - but this is a different interface (however the one with the problem is just a copy of the one which works)
Any ideas what this could be or what else I should be checking?
Kind regards
Ben

Hi Mark,
Thanks for your quick reply. I have checked idx5 and there is only one message/TID from the sending system.
The other ECC system is owned by a different department so I will ask them to run SM58 to see if anything is stuck in there as well

Similar Messages

I am trying to download from iTunes, but getting message stating insufficient local storage. In usage screen says I have 19 GB left. Don't understand why I cannot download

I am trying to download from iTunes and getting message stating insufficient local storage. In usage screen, states I have 19 GB storage space. Pls help!!!!!

Jenniferwood2829 wrote:
... so I don't understand why I still get this message when I show I have 15GB available in iCloud?
It means you do not have enough Space on your Device and need to create More Space on Your Device by Deleting some items off your device.

When I try to send email from phone I get message net sign in failed and the messages won't send

Why do I get the message net sign in failed when I try to send email from my phone? This just started about a week ago and I am unable to send email.

Hello yinz!
Let's get those emails sending! When you get the message, does the device prompt you to sign in to your email? If so, does it give you a different error message? The same? What type of email is it? Are you able to send/receive if using the PC? One option is to uninstall, then reinstall the email account from your device. Please give that a try and keep me posted on the results.
Thanks so much,
ChristinaB_VZW
VZW Support
Follow us on Twitter @VZWSupport

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

Can't send emails on my S5. Sends fine from gmail, but won't send from verizon account. Keep getting "Sending Failed" message.

My S5 won't send emails from my verizon email account, which is the default email for my phone. It will send fine from gmail, but when I try to reply to messages in the verizon account, I get a "Sending Failed" message and an eternal loop from my outbox trying over and over to send the message. Does anyone know how to fix this? I took it to the Verizon store for help, and they were completely useless.

The tech help is useless. You have to load it manually but you must know the ports to use for both sending and receiving. You must get them from your Verizon fios account. This worked for me.
Sent from my iPhone
<< Personal information removed to comply with Verizon Wireless Terms of Service >>

Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?

Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ?

He XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side

hi experts ,
we are using classic scenario (ECC 6.6 & SRM 7.0)
we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
but facing issue.
The XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
error as below
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi Vijay,
Can you tell us the interface name?
If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
Let us know if this helps you.
Regards,
Mayur

I revive messages from everyone but one person on my phone I had my iMessage on my iPad but I turned it off and also off on my phone but I can't seem too receive messages from them but they get mine,?

I revive messages from everyone but one person on my phone I had my iMessage on my iPad but I turned it off and also off on my phone but I can't seem too receive messages from them but they get mine,?

They have an iOS device? If so, have them send as an SMS, not an iMessage.

I am changing laptops and have tried to download and install Acobat 9 Standard from the Adobe website, but get message that my serial number is invalid. I log in and double check my account and it shows as a valid serial number. Now what?

I am changing laptops and have tried to download and install Acrobat 9 Standard from the Adobe website, but get message that my serial number is invalid. I log in and double check my account and it shows as a valid serial number. Now what?

If you had it on a laptop that crashed and you threw away, it is still considered as activated on that machine. YOu should contact Adobe by chat or by phone and have them deactivate for you.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/
If you are getting a message that indicates the serial number is not valid, you should look thru the following:
Error "The serial number is not valid for this product" | Creative Suite
http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

Cannot install Photoshop or Bridge from CC. Get message 'close bridge.exe', but it is not open.

Cannot install Photoshop or Bridge from CC. Get message 'close bridge.exe', but it is not open. I have CS5 installed on my PC. Help!

Terminate the process in task manager.
Mylenium

Installed Acrobat XI but getting message from a website that I need later version of PDF viewer to view full contents of document?

Installed Acrobat XI but getting message from a website that I need "a later version of PDF viewer to view full contents of this document". How to fix this?

THe message is misleading. Save the file to your desktop, even though all you see is the message. Then, open the saved file in Reader.

Sending pics from iphoto I get the message "The email server didn't recognize your username/password combination".

Sending pics from iphoto I get the message "The email server didn't recognize your username/password combination".

You need to set it up once in iPhoto-> Prefs -> Accounts b/c not everyone who uses iPhoto has or uses Mail.

Inbound Web Service calls get error "Reliable Messaging(RM) configured, but no Message ID..."

We are setting up the Communication System and Communication Arrangement "Business Partner Replication from SAP ERP".
For protocol, we are using Type 5 - WebServices. See screenshot below.
Our error is that when we send webservice calls to our C4C, we get messages:
1. Web service response is "Web service processing error; more details in the web service error log on provider side"
2. Backend error messages is "SRT: Plain SOAP: Reliable messaging (RM) configured, but no Messaging ID and no WSRM assertion provided"
We have sent messages from PI and also independently thru soapUI.
So it seems the C4C in the backend is stuck on the RM messaging protocol setting.
Appreciate any and all assistance.

Hi Tim,
For this error following are the places that needs to be checked.
1. In C4C the protocol defined in the Communication System should be 5 - Web Services
2. In C4C Communication Arrangement should have the right protocol selected
3. In PI make sure the Communication Channel's are created using provided Communication Channel Templates as part of the standard PI content.
In other words just follow the integration guide available in SMP to avoid such errors.
Hope this helps.
Thanks,
Prakash

How to post message from SAP to solution manager

Dear Friends,
We have configured solution manager service desk and the users were able to send messages so that we can view it in solman ITSM.
Now we want to bifurcate the messages from different people, hence we woule like to use of Problems in incident management of solman.
How a end user can create a message so that it comes and fall in problems folder of incident management,
Normally create support message from SAP will make the message to be visible in incidents of solman ITSM, but we want the message to fall in problems section of ITSM in solman.
Please help.
Thanks
Suresh

Hi,
In 7.1 we do have dedicated services as Problem management, with the transaction type SMPR. you can create ZMPR and proceed similar to SMIN ( incident) in ITSM.
also refer here Problem Management in SAP Solution Manager 7.1 - Part 2
Thanks
Jansi

I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

Thanks very much. Yes, I am using the installer files and serial number from the URL you referenced above. I have spent many hours trying to get it to work. I would love some help!!
The problem is that the instructions that come in the pdf with the downloaded files do not work, because the files that download from that page do not have the names referred to in the pdf, and most of the things that are referred to in the instructions do not happen. Here is what actually happened.
When I downloaded the files from the website, these are the files that downloaded:
I double-clicked each one and they extracted into two different folders.
Then I read a message on the forum that said to move all the extractred files into the same folder, so I moved all files into one file at C:\Creative Suite CS2\Adobe Creative Suite 2.0 as was pictured in the forum message. Here are screen shots showing all of the files in that folder I have now:
So then I double clicked the "Setup" file and I got this error message:
So then I tried to install the programs separately from the installer inside the folders Photoshop and Illustrator. I got this far and entered the serial number from the website:
But then I got this error message, even though I was using the files and serial number exactly from the website:
I tried both photoshop and illustrator and the same thing happened.
(I also looked at Solution 2 that you mentioned above but I don't have anything called VCOM on the computer. Also the error message that I got is not that one.)
I think I really need a set of instructions that lists the steps in order to do, but based on the files that actually download from the website and what happens when you extract the files. I feel as if I have all of the proper files but it still doesn't work.
Thank you very much!

Sending 2 messages from SAP but get 1 message in PI

Similar Messages

Maybe you are looking for