Sending a copy of each SOAP message arriving on the ESB to archive

I am trying to enable the ESB to serve as my "message copy collector" to achieve non-repudiation. My idea is that each SOAP message that enters the ESB will be copied, and a copy sent to an archive. Will this require some sort of service (attached to the bus) to which all service components attached to the bus will have to address a copy of their messages?

The message archiving feature of ALSB is not "strictly" designed to be used as a non-repudiation mechanism. The message persisted by ALSB may be slightly different than the message received on the wire.
There are other solutions available with ALSB to do non-repudiation.
If you simply want to store messages you can look at the report action:
http://edocs/alsb/docs26/operations/reporting.html
Gregory

Similar Messages

Once I've created a playlist on my imac and try to send it to my iPhone a message says that the tunes cant be sent because Imatch is enabled on my phone. I definitely turned match off and it still says the same. Can? anyone help me

Once I've created a playlist on my imac and try to send it to my iPhone a message says that the tunes cant be sent because Imatch is enabled on my phone. I definitely turned Imatch off and it still says the same. Can anyone help me?

You must also disable iTunes Match on the iPhone.

Traping the SOAP message before making the call.

We are using the axis for Web services, it works fine,
Here is my question, before the call go out to third party services, I need to log the SOAP message into our logging system. How would I trap the message?
Thanks in advance.
-APK.

I tried to achieve that using the following:
http://e-docs.bea.com/wls/docs81/webserv/interceptors.html#1072668
But it doesn't seem to work. try it!!
-k

BPM 11g - FYI task to send a copy to each member of a group

In BPM 11g I am trying to send an FYI task to each member of a group. They should each get their own copy of the task so that it does not get removed from their inbox when the first person dismisses it.
I was not successful in getting multiple copies of the task using FYI type even when multiple users were defined in the participant list. So, I changed the participant type to parallel. This was successful in sending mulitiple copies when I defined a participant list of hard coded users, but the process stopped and waited until at least one of the users dismissed it (so the FYI only behavior changed, but I can get around that with a parallel process flow).
Still using parallel participant type, I have been trying to change from my hard coded list of users to a security group of users. If I set assignment to the group, only one task is created for the group. So, I have been trying to assign to users and use the expression ids:getUsersInGroup('LoanAnalyticGroup') to get the users in this group. I have tried several approaches to this expression but can't get it to work.
Has anyone else successfully implemented sending tasks to all members of a group in 11g? Any advice?

Hi all,
We are also facing same issue.
The function ids:getUsersInGroup doesnt return value.
Even i imported identityservice.xsd and is_config .xsd and created variable using the *"users"* element of identityservice.xsd schema and assigned the value to this variable.
But Audit always says
*"XPath query string returns multiple nodes.*
*According to BPEL4WS spec 1.1 section 14.3, The assign activity part and query should not return multipe nodes.*
*Please check the BPEL source at line number "72" and verify the part and xpath query "*
Help me to resolve this issue.

Is there a way to send a copy of a text message to my google email?

Hello,
Is there a way to send a text message from someone to my google email account? if not, is there a way to save a text message permanently?
(Many thanks in advance!)

Yes just open message thread for user (Shows all messages for that user) and tap the rim of message window you want to send and select forward and the type email address in to field and send...

HT1495 How do I stop SMS messages being shared between multiple iphones on my itunes account? One is my wife's, one is mine and we do not want each others messages appearing on the other.

How do I stop SMS messages appearing on two devices on my iTunes account?
One phone is mine, one is my wife's and we dont want messages being shared.
We do have contacts and music etc shared.

If your are recieving mixed information on your phone on multiple devices this is going to be related to iMessage.
On your phone navagate to settings > messages > send and receive.
Check the information in that section make sure it relates to your AppleID and your phone. If you share a AppleID with the individual create a new AppleID for their device and insert that information.
If the numbers don't remove turn of iMessage restart your phone and turn it back it.
If all else fails disable iMessage otherwise turning it off is the quickest fix.

Running mac OS 10.5.8, Using Mail 3.5, Text encoding set to Automatic. messages arrive, but the message is 200 lines of alphanumerics. Top says Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64.

I use Mail 3.6 and some incoming email messages start with
Content-Type: text/plain;
charset=utf-8
Content-Transfer-Encoding: base64
then go on to 200+ lines of alphanumerics (mostly upper and lower case letters).
What causes this problem, how can I fix it?
Text encoding is set to Automatic, and I'm not using any fancy fonts. Senders are usually
sending from PCS that may well use Outlook.
Rosemary C. Chicago

Does it look something like this...
JVBERi0xLjYNJeLjz9MNCjMyNCAwIG9iag08PC9GaWx0ZXIvRmxhdGVEZWNvZGUvRmlyc3QgNi9M
ZW5ndGggMTU4L04gMS9UeXBlL09ialN0bT4+c3RyZWFtDQohx6hAp7lMT4WVkGpP6z3UpIQfO4eN
QRbgjhTqX5mfaabWcvQk/hLnUX6MpKiXwist+RiaiGrzj8XGSNFXuvETWsnoPoV687Exvzo1KYV4
jIuPmKXlRJvESTE/K2htJihPMS/o6fo3i+nHbTBRWpyrXSfmCPVEgsAzcyECvSU0Rz4MJsEXpdu6
6u/hg1hlPkb2gpkUQJv50YtWhkD/Jg0KZW5kc3RyZWFtDWVuZG9iag0zMjUgMCBvYmoNPDwvRmls
Check Mail>View>Message, does it say View Raw Source, Long Headers, or Default Headers?
See if view Plaintext version helps.

I have been unable to view the content of any messages since installing OS X Mavericks. I can send and receive mail, but viewing message content crashes the mail app.

Need assistance accessing mail message content. Message display in inbox, but content cannot be viewed. I have attempted reindexing without success. Send, compose and receive all work fine. When opening content of message, the mail app crashes.

Mail: Troubleshooting sending & receiving email messages

Why does the recieved time exactly the same as the sent time yeet the message arrive later the the recieved time

My inbox used to show different time for both sent and relieved Now even though the mail come in at a different time (later and further down in the message list it shows identical time for both

There are two different issues going on for shaolex.
1) Bug in iMovie 9.0.6+ which will add or substract your GMT time to the original time the video was shot.
2) The way iPhones save the date and time to the file. iPhone video files have the date and time the video was FINISHED instead of when it STARTED. The right aproach to fix this is to import the video to iPhoto and then drag and drop the clip into a iMovie event, then right click the clip in the Event window, then click CHANGE DATE AND TIME, and substract the lenght of the video from the time shown.
i.e. The video is 00:45:00 long, iMovie shows it as taken at 10:45:00. Change it to 10:00:00
Other phones do the same but most of them write the date and time correctly on the filename.
Hope this helps

SMS - all messages arrive from the same contact and now unable to delete

Hi
An SMS arriving now appears to come from one contact. Now I am unable delete that chat stream - already carried out hard reboot
Any advise would be great - thanks
K

I'm afraid not - a couple of hard reboots and pressing delete has finally emptied the SMS box but it was painful - I suspect there is still a bug there

Using PI 7.0 to handle moving a PDF document into a SOAP Message & sending

Here is our situation. We have the business writing all invoices for a day out of SAP to disk formatted as a PDF document; meaning, if the file is FTP'd from the disk of SAP to an NT server inside our firewall it is recognised as a PDF by Windows and Adobe.
After we read the PDF, I need to add it as the payload to a SOAP message that will be sent to the web service of a partner out side our firewall. They will extract the PDF from the SOAP Message and print the invoices... stuff the envelopes ... and post them.
I have been trying to use the file adapter to "pick up" the PDF and the SOAP adapter to send... Obviously, it is not working and I need some assistance. I am new to XI, so any advice will be greatly appreciated.
Thanks,
Rich

1.If the partner webservice supports SOAP attachments then you can send the required attachments from FileAdapter by selecting "Additional Files" check box in the File Sender channel.
Check this link: [http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm]
2.Else if this not the case i.e., you want to send PDF file stream as part of payload then you need to convert the PDF file stream to BASE64 format then map to one of the field of Webservice structure and then post using SOAP Adapter.
Remember the webservice field length should be enough to carry the BASE64 string otherwise the target application will fail to process the data or it will process data by truncating. Also there should be extra funtionality in target webservice for converting BASE64 format to binary format(PDF file).
But in general the webservices will support attachements. So you can go ahead with Case1.
Thanks,
- Gujjeti.

Implement a SOAP Request in an SSIS Package that sends a SOAP Message (Env) with Authentication Info, Receives XML FIle?

We need a small SSIS package to pass a SOAP message to a SOAP server and receive the response xml message.
We have the SOAP Endpoint, SOAP Action, and SOAP Message (which contains authentication elements). They work in a Talend Data Integration job (using
Talend's tSOAP component). A screenshot showing the Talend job and the configuration of the tSOAP component
is attached.
We need to implement the same thing in a Microsoft SQL Server 2012 SSIS package but haven't been able to get an SSIS Web Services task to work.
We haven't been able to configure it to pass the SOAP Action and SOAP Message.
How should this be accomplished in SSIS?
kholberger

I guess I was not clear. The Talend job works perfectly (and it took only a few minutes to configure).
I need to replicate the SOAP request function in an SSIS package. I've been trying to configure an SSIS Web Services Task to do that without success.
The SSIS Web Service Task asks for the .wsdl file, which I provide (though the Talend component
does not ask for it), but the SSIS WST does not ask for the SOAP Action or SOAP message. The target web service is protected by a security gateway that rejects the SSIS WST request. Somehow, the Talend tSOAP component sends the
SOAP message, which contains the security definition and authentication credentials (you can see part of that in the screen shot) which the endpoint accepts.
The question is: "How does one implement a SOAP web service request in an SSIS package that sends the SOAP Message".
Thanks.
kholberger

How to create soap message through java using JAXM

Hi,
I'M REALLY NEW TO THIS JAVA WEB SERVICES. I need to send a soap messages from core java with using url and it goes to my servlet and able to retrieve the soap message and do the processing. I really don't the work flow too. I'm using JAXM for receiving and transfering message. Could anyone tell me how its going to work for core java. Actually i need to accept any incoming soap messages and according to the request i got , i do need to do the further processing and again send back response to the core java. I'm not sure what i'm telling is wright or wrong. I literally confused with whole java web services . Could anyone help me out please or suggest some other suggestions through which i can proceed further.
in advance thanks a lot.......

File f = new File("c:\MyFolder");
f.mkdir();

SOAP Messaging Missing

Hi buddies,
     Have you ever been suffering from missing messages of SOAP sender adapter?
     The java sender program shows that the messaging has been delivered to XI SOAP adapter successfully, but I cannot find it in neither adapter engine, nor integration engine.
     BTW, our clients use the XFire technology to generate the soap message and send it without any exception to be throw out.
     Any suggestions?
YiNing

if I want to use SOAP sender adapter in asynchronous senario, is there any method that can be used to avoid this issue?
I've been suffering this from gSOAP which using C++, XFire which using Java in different projects.
I found these tools determines whether the receiver system have accepted the soap message by getting the http code 200.
Edited by: YiNing Mao on Jan 29, 2008 5:33 PM

ADDING xml to the SOAP Message from client

Hi, does anyone know how to add an xml file to the SOAP message passed by the client to the server?
I need to send an xml file, I have already tried attachments but they dont meet the purpose. I need to send the xml as part of the soap message in AXIS 1_4.
I read this somewhere about
SOAPEnvelope env = message.getSOAPEnvelope;
env.addBodyElement( new RPCElement("SOAPaccess","webservicename", new
          Object[] { }) );
FileInputStream file = new FileInputStream( "c:\\abcd.xml");
SOAPBodyElement aBody = new SOAPBodyElement( file );
file.close();
env.addBodyElement( aBody );
          However I am not certain how to go about doing this in axis.
I have been trying to find something related to this, but havent been able to.
Please let me know if you know how to add xml file to the body of a SOAP message.

If anyone is interested...I got this working,
//b is the byte form of the xml document.
InputStream is = new ByteArrayInputStream(b);
          Document doc =XMLUtils.newDocument(is);
          SOAPElement me = new MessageElement(doc.getDocumentElement());
          SOAPElement a=message.getSOAPBody().addChildElement(me);
          MessageContext mc=_call.getMessageContext();
          mc.setMessage(message);
          mc.getMessage().getSOAPBody().detachNode();
          SOAPBody sb = (SOAPBody)mc.getMessage().getSOAPPart().getEnvelope().addBody();
          sb.addChild(new MessageElement(doc.getDocumentElement()));
          mc.getMessage().saveChanges();
          System.out.println(mc.getMessage().getSOAPPart().getEnvelope());
          SOAPEnvelope env=(SOAPEnvelope)mc.getMessage().getSOAPPart().getEnvelope();

Sending a copy of each SOAP message arriving on the ESB to archive

Similar Messages

Maybe you are looking for