Sending Bank Commands to Yamaha's S90ES From Logic

No success in sending bank commands (MSB or LSB) to Yamaha keyboard. Any ideas?

Firstly, "dir" won't work, "cmd /c dir" will.
Secondly,
import java.io.*;
public class StreamBridge
  public StreamBridge(InputStream input, OutputStream output) throws IOException
    int read = input.read();
    while (read != -1)
      output.write(read);
      read = input.read();

Similar Messages

  • Help with controlling Bank changes on Yamaha S90ES from Logic

    Can anyone please help me with getting Logic to control the bank changes on this beast. I have it controlling the patch changes no problem it is just the bank changes I need thanx

    Yeah, I'm a bit confused too. Assuming your keyboard is sending bank/program changes in the same format is receiving them, Logic will just record your data, and play it back as the keyboard sent it.
    Logic is ignoring bank changes sent from my Korg Triton.
    So, when recording into a region, you only get program changes, and not bank changes in your recorded data?
    However, Logic is sending bank changes to the Triton perfectly.
    From playing back a sequence recorded from program changes generated by the keyboard, or using Logic's bank/program change parameters in the instrument parameters?
    If I use my keyboard to set the instrument, Logic sets the program,
    but the bank is ignored.
    I don't understand what you mean by "Logic sets the program".
    n the event list, the incoming data looks as standard as could be:
    my keyboard is sending a bank MSB and LSB, via events 0 and 32,
    followed by a program change,
    And you are saying that if you play that back, the keyboard doesn't change sounds correctly?
    followed by a sysex "66/48" which I assume identifies the source
    of the message (the Korg).
    You can't assume anything - it could be anything. It could be a sysex patch dump of the patch, or it could be some mode setting. You'd need to read the keyboard manual to find out what it is.
    So the question is: how do I get Logic to PAY ATTENTION to the
    darn bank change being sent by my keyboard?
    I really don't understand what you mean by "PAY ATTENTION". If you squirt MIDI data at Logic, Logic will record it into a region, and then play it back, as would all sequencers. What should Logic do differently?

  • "An error occurred sending the command to the application" When trying to open excel document from outlook 2007

    Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
    OS: Windows Server 2008 R2
    If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
    Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, we can Create a trusted location follow these steps
    Click the Microsoft Office Button , and then click Excel Options.
    Click Trust Center, click Trust Center Settings, and then click
    Trusted Locations.
    If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
    box.
    Click Add new location.
     IMPORTANT   We recommended that you don't make your entire
    Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
    In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
    locate the folder.
    If you want to include subfolders as trusted locations, select the
    Subfolders of this location are also trusted check box.
    In the Description box, type what you want to describe the purpose of the trusted location.
    Click OK.
    More detailed information you can refer to this link:
    http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Hope that helps.
    Sincerely
    William Zhou CHN
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

    Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
    If a shortcut is used while Firefox is already open the error does not occur.

    As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
    Regards, Steve

  • When I open Firefox 4 RC1 by clicking an external link (as from my desktop) I get an error: "there was a problem sending the command to the program"

    A box with this error: "there was a problem sending the command to the program" always pops up upon clicking any URL sitting in my desktop (or from any other folder). It will not happen if Firefox is already open. However, it is only an annoyance as the page fully opens with no problem.
    It started after I downloaded Firefox 4 beta ver 12. It continued after upgraded with RC1. It did not happen in my latest version of Firefox 3.6.x which I removed after installing 4 RC1

    This has happened to me many times but on the older FF 3 It could be a small bug, One should list the PC's being used as it could be related? Mine is an E-Machine Mod, W3609 running W7.

  • When going to a website from the desktop I get the followi ng message. "There was a problem sending the command to the program" Even though I get this messge, it still connects with the website/

    When going from the desktop to a website, I get the following message. "There was a problem sending the command to the program" Even though I get this message, I still connect to the website.

    As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
    Regards, Steve

  • I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

    I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

    See:
    *http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

  • How to send a command from a vc++.exe to LABVIEW.exe in order to control the button on the LABVIEW.exe

    Hello, everyone. Using VC++, I have gotten the handle of a *.exe(built by Labview), but I cannot get the button handle. I want to get the button handle and post the message to control the button. How can I do that? When I use the SPY++, the *.exe(built by Labview) have not any child windows which is very different from the *.exe(built by VC++). In SPY++, what is the LVDChild class? How can I send the message to control the button on *.exe(built by Labview)???
    That is  to send a command from a vc++.exe to LABVIEW.exe in order to control the button on the LABVIEW.exe. How can I get it ?
    Thank you!

    hummingbird wrote:
    Thank you! But I dont kown how to use vi server to raise a value signalling event. Can we put vi server into the vc program? Can you give me some more information or some examples, hehe!
    hummingbird
    Checkout the LabVIEW ActiveX server interface in the User Manual in Chapter 20, Windows Connectivity and the VI Server Reference in Chapter 17, Programmatically Controlling VIs.
    There is a sample for Visual Basic under examples/comm/VBtoLV.frm, which should be quite simple to translate to Visual C as long as you can figure out the basics of ActiveX programming in VC (I have never done anything with ActiveX in VC). For those basics I would recommend some text book or MSDN.
    Rolf Kalbermatter 
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Sending novell command from PHP

    Hi,
    I am trying to unzip a file from php.
    I am trying to run a unzip command from phpm but the novell server won't take it.
    when i do: <?php exec("unzip DATA1:/zipfile.zip"); ?>
    i get: unable to find load file SYS:/TMP/UNZIP
    when i do: <?php exec("echo unzip DATA1:/zipfile.zip"); ?>
    i get: unable to find load file SYS:/TMP/ECHO
    when i do: <?php exec("echo unzip "); ?>
    i get: unzip.nlm load status KenelOnly
    Does someone know how to send a command from php to Novell correctly??
    Thank you,

    Have you tried specifying the path with something like
    <?php exec("sys:/system/unzip DATA1:/zipfile.zip"); ?>
    Wolfgang
    "Flex Travel - Higo Rocha Cidario" <[email protected]> wrote in message
    news:oE0uh.7409$[email protected]..
    > Hi,
    >
    > I am trying to unzip a file from php.
    > I am trying to run a unzip command from phpm but the novell server won't
    > take it.
    >
    > when i do: <?php exec("unzip DATA1:/zipfile.zip"); ?>
    > i get: unable to find load file SYS:/TMP/UNZIP
    >
    > when i do: <?php exec("echo unzip DATA1:/zipfile.zip"); ?>
    > i get: unable to find load file SYS:/TMP/ECHO
    >
    > when i do: <?php exec("echo unzip "); ?>
    > i get: unzip.nlm load status KenelOnly
    >
    > Does someone know how to send a command from php to Novell correctly??
    >
    > Thank you,
    >

  • How to get the time length from send record command to record video really?

    I have two buttons. Record/Stop
    I press Record button to record the video and press Stop
    button to stop recording.Now,I spend 1986 ms from press Record
    button to press Stop button.
    But the flv file's length is 1920 or 1910 or 1915 ms.
    So I want to get the time length from send record command to
    record video really.
    Can you give me some suggests.
    Thanks!

    maybe you have lag in publishing.... are you try watch de
    NetStream.liveDelay() method?
    or start counting when NetStream.onStatus has
    "NetStream.Record.Start" and "NetStream.Record.Stop" in information
    objects....

  • Sending AT command from xbee pro to read the data from device

    I am new to serial communications using Labview. 
    I am having trouble with starting up the project, where I have to design the software that involves XBee pro module.
    I need to send the READ command to read the data from a device. Then the software should go to the AT command mode (we enter the AT command mode by entering +++)
    Then I need to read the energy level of the device by entering the command: ATED. The software should continuously read the energy level every 30 seconds, which will be displayed on the front panel. 
    I am not sure where to start the software from. i.e. how to enter the Read command and then the AT command. 
    I am hoping someone can suggest how to start this.
    Thanks  in advance. 

    Hello Manny,
    You could also review the discussion from the link below which may also guide you in a good direction with your project. 
    "Need example vi using AT commands for dialing the modem at the remote end"
    http://forums.ni.com/t5/LabVIEW/Need-example-vi-using-AT-commands-for-dialing-the-modem-at-the/td-p/...
    Best regards,
    Daniel Cabezas
    Applications Engineering
    National Instruments
    www.ni.com/support 

  • How to send AT Command in fax modem from fax api?

    hi,
    i want to send a dial pad number in my fax modem.
    i am using Interop.FAXCOMEXLib dll in my C# Project.i can send and receive fax.
    i want to send a number of dial (after 20 sec dialing) for example send 5 number or send at command : "AT5" for dialing pad.
    can i send AT Command in Interop.FAXCOMEXLib ?
    please help me.
    Thanks.

    Hi Ali,
    I am not expert on AT Command.
    I have seen
    Send and Read SMS through a GSM Modem using AT Commands and
    AT commands Send/receive SMS. But i have never seen send AT Command in Interop.FAXCOMEXLib. I am afraid this is not support.
    Actually, this case related to desktop. If you still not resolve this issue, please redirect to
    Windows Desktop Development  >
    General Windows Desktop Development Issues
    forum for better support.
    Thanks for your understanding.
    Good Luck.
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Bank changes on Yamaha S90ES

    Can anyone please help me with getting Logic to control the bank changes on this beast. I have it controlling the patch changes no problem it is just the bank changes I need thanx

    I use the logic environment found at sniney.com.
    http://www.sninety.com/S_Mart/
    Powermac G4 dual 1.42 Ghz   Mac OS X (10.3.9)  
    Powermac G4 dual 1.42 Ghz   Mac OS X (10.3.9)  

  • When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

    when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
    i am using office2007  with windows7 premium home edition.  i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
    it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
    a real PITA.   anyone have any solution for this? Thanks 
    ken yanow

    Hi,
    Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
    Click the Microsoft Office Button, and then click Excel Options.
    Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
    check box in the General area.
    Click OK.
    If the problem cannot resolve, the Run as administrator may selected.
    Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
    Right-click EXCEL.EXE > Properties >
    Compatibility tab.
    Under Privilege Level, uncheck Run this program as an administrator
    check box.
    Best regards.
    William Zhou
    TechNet Community Support

  • Cannot send email via ActiveSync when user connect from Internet (Exchange 2010 SP3 RU5)

    Hi All. 
    This is the first time I encounter this kind of issue, whenever user connect from the internet they cannot send email from their Phone or Windows Mail App, but they can retrieve email 
    But when they connect from Internal Network they can send email. I already test ActiveSync from internet using www.testexchangeconnectivity.com and it pass all tests. 
    I also check the Firewall and all the necessary ports already opened (we even open all ports) , the default TTL on the firewall 3600 second. 
    From what I read ActiveSync use some kind of HTTP POST or in MS terminology "PING" command, but still have no idea what kind of configuration that should be made to the Firewall so it can pass this "PING" command. Because from what I
    see in Android Logcat the problem always related to this PING command 
    10-07 08:12:38.714 I/Exchange(31971): Interrupt with reason 1
    10-07 08:12:38.714 I/Exchange(31971): Ping task ending with status: -1
    10-07 08:12:38.904 D/Exchange(31971): created outputstream
    10-07 08:12:39.204 W/Exchange(31971): IOException sending mail
    10-07 08:12:39.204 E/Exchange(31971): Generic error for operation SendMail: status 200, result -100
    10-07 08:12:39.204 W/Exchange(31971): Aborting outbox sync for error -99
    10-07 08:12:39.274 I/Exchange(31971): Ping task starting for 3
    10-07 08:12:39.304 D/SyncManager(644): failed sync operation [email protected] u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71219435, EXPEDITED, reason: 10040, SyncResult: stats [ numIoExceptions: 1]
    10-07 08:12:39.304 D/SyncManager(644): not retrying sync operation because SYNC_EXTRAS_DO_NOT_RETRY was specified [email protected]  u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71220078, EXPEDITED, reason: 10040

    Hi ronaldosy,
    How about the work flow of Outlook or OWA on PC internally/externally?
    If only phone has this issue, I suggest ask ActiveSync Forum for help so that you can get more professional suggestions. For your convenience:
    http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
    Best Regards,
    Allen Wang

Maybe you are looking for