Sending cfg via SNMP not working

Hi,
I am trying to send some configs using SNMP to a 7200 (using 12.4(21a)) and it fails me on the last command when trying to start the procedure, as follows:
persio.pucci@tacacs:/tftpboot$snmpset -v2c -c COMUNITY 10.20.30.1 .1.3.6.1.4.1.9.9.96.1.1.1.1.2.200 integer 1SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.2.200 = INTEGER: 1persio.pucci@tacacs:/tftpboot$ snmpset -v2c -c COMUNITY 10.20.30.1 .1.3.6.1.4.1.9.9.96.1.1.1.1.3.200 integer 1SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.3.200 = INTEGER: 1persio.pucci@tacacs:/tftpboot$ snmpset -v2c -c COMUNITY 10.20.30.1 .1.3.6.1.4.1.9.9.96.1.1.1.1.4.200 integer 4SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.4.200 = INTEGER: 4persio.pucci@tacacs:/tftpboot$ snmpset -v2c -c COMUNITY 10.20.30.1 .1.3.6.1.4.1.9.9.96.1.1.1.1.5.200 address 10.10.10.1SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.5.200 = IpAddress: 10.10.10.1persio.pucci@tacacs:/tftpboot$ snmpset -v2c -c COMUNITY 10.20.30.1 .1.3.6.1.4.1.9.9.96.1.1.1.1.6.200 string userSNMPv2-SMI::enterprises.9.9.96.1.1.1.1.6.200 = STRING: "user"persio.pucci@tacacs:/tftpboot$ snmpset -v2c -c COMUNITY 10.20.30.1 .1.3.6.1.4.1.9.9.96.1.1.1.1.14.200 integer 4Error in packet.Reason: inconsistentValue (The set value is illegal or unsupported in some way)Failed object: SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.14.200
I can see that the entry was created, but I cannot issue a "CreateAndGo" command.
persio.pucci@tacacs:/tftpboot$ snmpwalk -v2c -c COMUNITY 10.20.30.1 .1.3.6.1.4.1.9.9.96.1.1.1.1SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.2.200 = INTEGER: 1SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.3.200 = INTEGER: 1SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.4.200 = INTEGER: 4SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.5.200 = IpAddress: 10.10.10.1SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.6.200 = STRING: "user"SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.9.200 = INTEGER: 2SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.10.200 = INTEGER: 4SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.11.200 = Timeticks: (1836298009) 212 days, 12:49:40.09SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.12.200 = Timeticks: (1836302109) 212 days, 12:50:21.09SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.13.200 = INTEGER: 3SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.14.200 = INTEGER: 1SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.15.200 = INTEGER: 1SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.16.200 = STRING: "10.10.10.1"persio.pucci@tacacs:/tftpboot$
Any ideas?

First, make sure the contextual row number you're going to use is destroyed, then do your snmpset as a single snmpset command instead of setting individually for your create and go row.
Snmpset -v2c - c com string device snmpvar1 snmpvar2
And so on...
Something like this:
You need to create the row. Then you would go about setting the various
objects of the row
-protocol for transfer
-ipAddress of the server
-file names for Dst and Src
and then, finally activate the row.
Example using OIDs - You must enter the enter row sequence as follows:
snmpset -v 1 -c private 10.44.31.194 .1.3.6.1.4.1.9.9.96.1.1.1.1.2.90 i
1 .1.3.6.1.4.1.9.9.96.1.1.1.1.3.90 i 4 .1.3.6.1.4.1.9.9.96.1.1.1.1.4.90
i 1 .1.3.6.1.4.1.9.9.96.1.1.1.1.5.90 a 10.44.31.134
.1.3.6.1.4.1.9.9.96.1.1.1.1.6.90 s router-config
.1.3.6.1.4.1.9.9.96.1.1.1.1.14.90 i 4
Example using NAMED OIDs:
snmpset -v 1 -c private 10.44.31.194 ccCopyProtocol.90 integer 1 ccCopySourceFileType.90
integer 1 ccCopyDestFileType.90 integer 3
ccCopyServerAddress.90 ipaddress "10.44.31.134" ccCopyFileName.90 octetstring
"router-config" ccCopyEntryRowStatus.90 integer 4* *
Both of the above example are entered contiuously as one line.
Hth,
Cary
Sent from Cisco Technical Support iPhone App

Similar Messages

Sending SMS via Bluetooth not working

Hi,
I have two Nokia phones, an N73 and an older 6600. I was able to pair both with the Bluetooth in my MacBook Pro SR.
I can access the web via dial-up networking, so that's working fine.
However, I am unable to send SMS via AddressBook over the phone. When I click the little connect-to-bluetooth button in AddressBook, I am first asked to pair the phone - even though it's already paired, and connects automatically on both the computer and the phone. Then, when I do enter the code on the phone, the connection just fails. The button gets a slight blue outline but the B symbol doesn't actually light up as it should.
Send SMS remains grayed out.
Has anybody got this to work or know what could be wrong?
PS: I am able to send SMS on Windows using MS SMS Sender, so I am sure that it's not the phone's fault.
This worked fine with my Titanium Powerbook with USB Bluetooth dongle.

Thanks for the response, but that's not it. The N73 is listed as supported, and iSync works perfectly well. Dial-Up networking also works perfectly well.
Only sending SMS via bluetooth doesn't work.
Also - no idea if this is related - faxing via the 6600 doesn't work anymore, which is strange because it used to work on the TiBook. Most people don't even know you can fax via Bluetooth phone and most newer phones have lost this capability so I guess this is just on its way out. Too bad because it was pretty useful...

Monitor OSPFv3 via SNMP not working - Is OSPFv3 MIB supported?

I need to be able to query the OSPFv3-MIB via SNMP to track the status of OSPFv3.
I have setup a 3945 router in a test lab network and I have configured it in an Ipv6 network with OSPFv3. The router has an active OSPFv3 neighbor and I can use that neighbor to send/receive data (the routing is working fine). However, when I walk the SNMP MIBs I don't get a response for the OSPFv3-MIB. According to the Cisco SNMP Object Navigator this MIB should be located at 1.3.6.1.3.102.*. Below is an example trying to query a particular OID from the OSPFv3 MIB.
C:\>snmpwalk -v 2c -c public 197.16.18.1 1.3.6.1.3.102.1.5.1.8
SNMPv2-SMI::experimental.102.1.5.1.8 = No Such Object available on this agent at this OID
I can walk other parts of the MIB (For example the OSPFv2 MIB) and get responses, so I know the router has SNMP turned on.
Looking at the Cisco IOS Mib Locator tool (http://tools.cisco.com/ITDIT/MIBS/MainServlet?IMAGE_NAME=c3900-universalk9-mz.SPA.152-4.M3.bin) for the current software version I am running (c3900-universalk9-mz.SPA.152-4.M3.bin) on a 3945 router it claims that the OSPFv3 MIB is supported in this image.
Maybe I need to configure something else? Maybe my SW doesn't really support this MIB? Could it be that I have to query the router over Ipv6 to get the OSPFv3-MIB (I have only been trying Ipv4)?

Hi ,
As Vinod suggested , you need to configure the "SNMP CONTEXT"
Configure:
==========
Basic configuration consists of 4 steps:
Configure mapping between VRF name and SNMP context :
snmp-server vrf <vrf_1> context <context_1>
Create community string corresponding to the VRF :
snmp-server community <vrf_1> RW
Define context string
snmp-server context <context_1>
Configure mapping between context and community:
snmp-server community-map <vrf_1> context <context_1>
(optional) Configure snmp server traps for this VRF community
snmp-server host <IP> traps version 2c <vrf_1>
For e.g:
snmp-server vrf miki
context miki_bgp
snmp-server community miki RW
snmp-server context miki_bgp
snmp-server community-map miki context miki_bgp
Hope it will help
Thanks-
Afroz
***Ratings Encourages Contributors ***

Sender Soap Channel is not working - Service Temporarily Unavailable [503]

dEAR FRIENDS,
We are facing one critical issue in sender soap adapter. After upgrading our system to PI 7.1 The sender soap channle is not working. From source system it is not reaching PI : the log from source system as follows:
org.springframework.ws.client.WebServiceTransportException: Service Temporarily Unavailable [503]
      at org.springframework.ws.client.core.WebServiceTemplate.handleError(WebServiceTemplate.java:627)
      at org.springframework.ws.client.core.WebServiceTemplate.doSendAndReceive(WebServiceTemplate.java:551)
      at org.springframework.ws.client.core.WebServiceTemplate.sendAndReceive(WebServiceTemplate.java:502)
      at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:351)
      at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:345)
      at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:337)
      at com.palm.txnengine.wsclient.DailyRevenuePostingWSGateWaySupport.postToSap(DailyRevenuePostingWSGateWaySupport.java:23)
      at com.palm.txnengine.wsclient.DailyRevenuePostingImpl.execute(DailyRevenuePostingImpl.java:93)
      at org.springframework.batch.core.step.tasklet.TaskletStep$2.doInChunkContext(TaskletStep.java:264)
      at org.springframework.batch.core.scope.context.StepContextRepeatCallback.doInIteration(StepContextRepeatCallback.java:67)
      at org.springframework.batch.repeat.support.RepeatTemplate.getNextResult(RepeatTemplate.java:352)
      at org.springframework.batch.repeat.support.RepeatTemplate.executeInternal(RepeatTemplate.java:212)
      at org.springframework.batch.repeat.support.RepeatTemplate.iterate(RepeatTemplate.java:143)
      at org.springframework.batch.core.step.tasklet.TaskletStep.doExecute(TaskletStep.java:239)
      at org.springframework.batch.core.step.AbstractStep.execute(AbstractStep.java:198)
      at org.springframework.batch.core.job.AbstractJob.handleStep(AbstractJob.java:348)
      at org.springframework.batch.core.job.flow.FlowJob.access$0(FlowJob.java:1)
      at org.springframework.batch.core.job.flow.FlowJob$JobFlowExecutor.executeStep(FlowJob.java:137)
      at org.springframework.batch.core.job.flow.support.state.StepState.handle(StepState.java:60)
      at org.springframework.batch.core.job.flow.support.SimpleFlow.resume(SimpleFlow.java:144)
      at org.springframework.batch.core.job.flow.support.SimpleFlow.start(SimpleFlow.java:124)
      at org.springframework.batch.core.job.flow.FlowJob.doExecute(FlowJob.java:105)
      at org.springframework.batch.core.job.AbstractJob.execute(AbstractJob.java:250)
      at org.springframework.batch.core.launch.support.SimpleJobLauncher$1.run(SimpleJobLauncher.java:110)
      at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:49)
      at org.springframework.batch.core.launch.support.SimpleJobLauncher.run(SimpleJobLauncher.java:105)
      at org.springframework.batch.core.launch.support.CommandLineJobRunner.start(CommandLineJobRunner.java:207)
      at org.springframework.batch.core.launch.support.CommandLineJobRunner.main(CommandLineJobRunner.java:254)

Hi,
Please check this generic description:
The error message 503 Service unavailable Application stopped! is displayed.
Description:The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
u2022 Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
u2022 The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
u2022 Refer SAP Note 803145,807000,791655
May it helps.
Regards,
Caio Cagnani

Sending e-mails does not work

After switching on the mail server, adding an MX record on the DNS of the server and on the web site of the domain supplier the mail server is working. That is sending and receiving locally works. Receiving external mail works as well but sending mail back does not work. The mail is sent but never arrives. The SMTP log gives the following message.
Jan 19 23:19:10 domain.nl postfix/smtp[80282]: connect to gmail-smtp-in.l.google.com[173.194.70.26]:25: Operation timed out
Jan 19 23:19:10 domain.nl postfix/smtp[80282]: connect to gmail-smtp-in.l.google.com[2a00:1450:4001:c02::1a]:25: No route to host
Jan 19 23:19:10 domain.nl postfix/smtp[80282]: connect to alt1.gmail-smtp-in.l.google.com[2a00:1450:4010:c04::1b]:25: No route to host
(domain.nl is not the real used domain name)
Can anybody help.
It is the last part of the server that does not work. Wiki's, webserver, network users, calendars, contracts are all working fine.
Thanks in advance.

are you on a static IP with a provider that doesn't block port 25?
from terminal, what happens when you
telnet gmail-smtp-in.l.google.com 25

Share via Mail not working after Yosemite upgrade

Hi all,
I recently upgraded from Lion to Yosemite and now I cannot use the Send via Mail option in Pages (or Numbers for that matter).
I searched for this already in another tread but the answer (permission repair) did not work. The Exporting option still works, although it wants to save the file in a strange location, namely LIBRARY - CACHES - CLEANUP AT STARTUP - COM.APPLE.IWORK.PAGES.8572.TEMP.XXXXXXX instead in DOCUMENTS or DESKTOP.
Any and all advice on this small but annoying inconvenience is welcome :-)
Thanks
Ray

Pages '09 v4.3 has lost this capability on Yosemite. Export to desired document format, and then drag/drop into Mail body.

Sender Agreement - Assigned Users not work

Hi Experts,
I have a scenario SOAP - XI and I want to establish authorization to certain users. I am trying to assign user to the Sender Agreement but it does not work.
I am using in the URL the next prefix /sap/xi/engine?type=entry, but if I use the prefix /XISOAPAdapter/MessageServlet, it works fine.
Is it possible to assign users to Sender Agreement using the prefix /sap/xi/engine?type=entry?
Thanks,

Hi,
There are two ways of sending a message to XI using SOAP Adapter. The first one is to the adapter engine via ./XISOAPAdapter/MessageServlet. The second one is to the integration engine via propose URL. The first one will use the sender agreement because it is considered a java call but the second one will not (same with PlainHTTPAdapter).
Hope this helps,
Mark

Emails via Iphone not working any more

Hi, I have a email account with yahoo, did work perfectly till today, after sending emails via Iphone nothing is happening, no message in fowlder sent and also the recipient does not get my mail. Tested: sending photo via email and text email
Second problem: I had twice that my Iphone did not react at all on touching the screen, had to shut down the phone and switch it on again.....
Has anyone any ideas, and sorry for my english....
Andreas from Germany

Yahoo mail on the iphone has an issue with sending emails that have attachments, like a picture, usually it does not send at all or if it does the attachment is gone. I think its because the iphone still uses yahoo mail classic which handles attachments strangely. So if the emails your sending that are disappearing have attachments then thats why. I've found that when dealing with attachments it works better if you use the mobile version of yahoo.
As for the touch stopping working...probably just the nature of software and OS's in general. They all crash and freeze up and all have to be rebooted from time to time.

Installing Flash Player 11.8.800.94 via GPO not working properly

Hello,
i've installed Flash Player 11.8.800.94 via GPO.
Installation works fine, but there is no flash player available in Firefox or Internet Explorer.
Deployed both Flash Players.
Tried to reinstall Flash Player 11.8.800.94 for Firefox, but it's still not active.
Windows 7, 64bit
Greetings,
Michael

Hello Comvel.
RE:
Hello,
i haven't fixed it yet.
I've deployed the last few version of flash player without any problems.
I haven't found any new things in the admin guide.
The plugins don't show up in both browsers. I can't enable them.
On the most importent clients, i've installed flash player manually.
I know it has been a few months since your post but, I was wonderingif you were able to find a solution for this that didn't involve manual installations. I've recently deployed 11.8.800.175 and am running into the same problems. Some work stations are just fine. But others, (both windows 7 and xp, all IE8) are not working. When navigating to a site like youtube, theres a banner that says update is needed. When you go to manage add-ons there is no shock object/add on.

Sync Google Contacts via iTunes not working

Hi
Just got a new Macbook with Yosemite and am syncing my Google Mail, Calendar, Contacts with the Macbook without difficulty, I have disabled iCloud syncing for Mail, Calendar, and Contacts.
Now, I want to get Google Contacts set up on my old iPhone 3G (iOS 4.2.1) as a stop gap before getting a new iPhone down the line. However, I can't find a reliable way of getting my Google Contacts on to the iPhone 3G.
Exchange Sync and CardDAV do not work. I don't mind syncing via iTunes but I can't set this up either. Despite telling iTunes to sync 'All Contacts' it won't sync those from my Google account. Only contacts in 'On My Mac' group sync across, but I don't want to manually keep track of and copy new Google contacts into this group just to sync.
Why won't iTunes sync the Google contacts group - currently it is the only group in my OS X Contacts.
I have reset sync and reinitialised the iPhone to factory image - neither works.
Any advice appreciated.

try rebooting the appletv.
also, you have a first generation appletv but have posted in the second generation appletv forum.

Certain features in Gmail, like chat and sending an email, are not working in normal mode.

There seems to be some sort of problem with perhaps Flash/Java in Gmail, not sure. The chat box doesn't appear, and I can't send or reply to emails unless I'm in safe mode. It seems as though some add-on or feature is not working properly. This is a new issue, but didn't come about after downloading a newer version of Firefox. I am currently using 3.6.
== URL of affected sites ==
http://gmail.com

Update flash to the latest version: http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin?s=update+flash&as=s#Updating_Flash

Javascript calls via getURL not working anymore

After upgrading to flash player 9,0,115,0 a simple call like
getURL("javascript(alert'message')); doesn't work anymore on
Internet Explorer (it fails without any error in policyfiles.txt,
but it still work on Firefox). My IE version is 7.
I can't use ExternalInterface 'cause i need to publish as
Flash Player 7 AS2.0.
Any comment or suggestion?

I have a similar problem. When running a local HTML file,
using IE7 and FP 9,0,115,0, all the getURL function calls cease to
work.
If I downgrade to FP8, still using IE7, everything works.
If I downgrade to IE6, still using FP9.0.115.0, everything
works.
If I load the HTML via HTTP (instead of local), using IE7 and
FP9.0.115.0, everything works.
If I use Firefox, with FP9.0.115.0, everything works.
So, the function calls fail only when the swf is contained on
a
local HTML file, using
IE7, and
FP9.0.115.0. The problem is, most of our customers have that
software profile, and all of them need to load the content locally
(its very heavy for network transmission).
All the getURLs are like this:
getURL("javascript:someFunction()");
We're setting the 'allowScriptAccess' to 'always'.
Also, if we put the OBJECT tag inside the HTML (instead on an
external JS file), the function calls still do not work.

Sending Mail, Port 587 not working

My Mail app doesn't send anything. I can receive stuff with not problem, and I did a search here on the forums and found that changing the port to 587 was one fix. That did not work.
The message I am getting it that the server is timing out, and after calling my ISP and being on the phone with them for half an hour they said if was an apple issue.
Has anyone figured out any other fixes besides changing the port to 587?
Blake

Blake,
This may only be a typo as you posted, but you have misspelled the server name, in that I am sure the prefix should be smtp and not stmp.
If only a typo as your posted, then this might be an issue with MTU (maximum transmission unit). See the following support document for methods of diagnosing this:
http://docs.info.apple.com/article.html?artnum=303192
If lowering the MTU manually works, then we can look for other ways to fully accomplish the correct balance, which might include shutting down modem, router, and other elements of the network and then repowering.
Ernie

When trying to send mail via Lotus Notes webmail, mail does not get send

Firefox 4.01, XUL-manager installed.
Logged in to corporate webmail, can see mails etc. I can create a mail (new, reply, etc.) but when I hit the send button, I get a popup asking if a copy needs to be archived. no matter if I say yes or no, the mail does not get send. Also saving as draft does not work.

Hi,
yes smtp is a standard and I think you could use this with almost every smtp server.
If your smtp server doesn't require authentication you can access it without an authenticator
I think...
Best regards,
Jens

Via Heade not Work!! (6.0sp1)

Hi.
i used the http header that "Via".
but web server response "400" error into GET method.
i have that logs.
it's OK - sjs web 6.1sp6 on Windows. return code 200.
started....started....
WWWConnect::Connect("192.168.0.141","80")\n
IP = "192.168.0.141:80"\n
source port: 64654\r\n
REQUEST: **************\n
GET / HTTP/1.0\r\n
Via: test\r\n
Host: 192.168.0.141\r\n
Accept: */*\r\n
\r\n
RESPONSE: **************\n
HTTP/1.1 200 OK\r\n
Server: Sun-ONE-Web-Server/6.1\r\n
Date: Thu, 03 Jun 2010 08:23:01 GMT\r\n
Content-length: 461\r\n
Content-type: text/html\r\n
Last-modified: Sun, 31 May 2009 13:36:07 GMT\r\n
Accept-ranges: bytes\r\n
Connection: close\r\n
\r\n
<!DOCTYPE doctype PUBLIC "-//w3c//dtd html 4.0 transitional//en">\r\n
<HTML>\r\n
<HEAD>\r\n
<meta http-equiv="Content-Type"\r\n
\tcontent="text/html; charset=iso-8859-1">\r\n
\t<TITLE>Sun[tm] ONE Web Server, Enterprise Edition 6.1</TITLE>\r\n
</HEAD>\r\n
\r\n
<FRAMESET BORDER=0 ROWS="80, *">\r\n
<FRAME NAME="banner" SRC="banner.html" SCROLLING="no">\r\n
\t<FRAME NAME="content" SRC="launch.html" SCROLLING="auto">\r\n
</FRAMESET><noframes></noframes>\r\n
</HTML>\r\n
\r\n
WWWConnect::Close("192.168.0.141","80")\n
closed source port: 64654\r\n
finished.
it's not work . iplanet 6.0sp1 on solaris. return code 400.
started....
WWWConnect::Connect("192.168.0.71","80")\n
IP = "192.168.0.71:80"\n
source port: 64717\r\n
REQUEST: **************\n
GET / HTTP/1.0\r\n
Via: test\r\n
Host: 192.168.0.71\r\n
Accept: */*\r\n
\r\n
RESPONSE: **************\n
HTTP/1.1 400 Bad request\r\n
Server: Netscape-Enterprise/6.0\r\n
Date: Thu, 03 Jun 2010 08:23:18 GMT\r\n
Content-type: text/html\r\n
Content-Length: 147\r\n
Connection: close\r\n
Via: 1.1 AN-0003011042661574\r\n
\r\n
<HTML><HEAD><TITLE>Bad request</TITLE></HEAD>\n
<BODY><H1>Bad request</H1>\n
Your browser sent a query this server could not understand.\n
</BODY></HTML>
WWWConnect::Close("192.168.0.71","80")\n
closed source port: 64717\r\n
finished
why? 6.0 is not support via header?
any idea?
thk...

6.0 is out of support life. pl upgrade to 7.0 update 8 or above

Sending cfg via SNMP not working

Similar Messages

Maybe you are looking for