Sending email alert from SAP Application System

Hi,
we have one scenario like we need to send one email alert from application system, if ther is some error in proxy or any error is ther in SXI_MONITOR of application sytem. Is ther any way to achieve this.
Regards
Pradeep P N

>
Pradeep P N wrote:
> Hi,
>
> we have one scenario like we need to send one email alert from application system, if ther is some error in proxy or any error is ther in SXI_MONITOR of application sytem. Is ther any way to achieve this.
>
>
>
> Regards
> Pradeep P N
for sending mails from application system you can use various FMs -
http://sapr3.tripod.com/abap011.htm
http://www.sap-basis-abap.com/abap021.htm
for XI related you can always utilize alerts

Similar Messages

Can we send .csv file from sap srm system to sap pi?

Hi Experts,
we have 3 options send the data from sap systems to sap pi.i. e.proxy,idoc and rfc only
How can we send .csv file from sap srm to sap pi?
Regards,
Anjan

Anjan
As you know SAP SRM and SAP PI are different boxes.
*_Option 1:_*
we need a shared AL11 directory in between SAP SRM and SAP PI (Ask basis to setup shared folder). Place / Populate the file in the folder from SAP SRM and then it can be picked through sender file communication channel.
In this case you (Basis team) will share one folder which is visible from the AL11 transaction of both the systems (SRM and PI). You will drop .csv file using some report or program from SRM at this location and from PI you can read that file using File communication channel (NFS mode).
Option 2:
Setup a FTP at SRM environment and expose some folder which can be accessible from PI. Use sender file communication channel at PI end to pick the file.
You can use this option incase sharing of folder is not possible (due to network / other constrains). Here FTP server is required to expose any folder as FTP so as it can be accessible from internet (remote location). You need to expose some folder at SRM machine. You will drop .csv file using some report or program from SRM at this location. Now PI can fetch the file from that location using sender file communication channel (FTP Mode) providing user credentials.
Hope it clears now.
Regards
Raj

Is there any other option to perform any action / call script/program instead of sending email alerts from app Insights ?

Hi ,
For app Insights configured alerts ( CPU usage/Response time ), we have email notification but do we have any other option to perform any action / call script/program
in case of alert from App insight ?
We need to log these alerts into existing ticketing system like MS Alarm/MS ticketing
( GFS ) , please suggest

We don't support performing any action except email notification in case of alert from App Insight.
To integrate with
MS Alarm/MS ticketing  (
GFS ) you’d need parse the mails from AI and use the
MS Alarm/MS ticketing  (
GFS )  connector to create a ticket.
Mihail Smacinih

Sending invoice direclty from SAP server to customers

Hi,
after configuring Smtp connection between SAP ECC and Exchange server. i'm able to send documents to people who's mail address are maintained in user master record .
su01 > maintaining e-mail address for all sap users.
whith in this list i'm able to send SAP attachements.
But, only to @xyz.com (exchange server belongs to XYZ company and XYZ domain)
if we maintain other domain address in the user master record.
i.e.. for one sap user if we maintain e-mail address as @[email protected]
SAP attachements can't be sent to different domain mail address.
where it is getting stopped ?
Exhange server or SAP server stop sending the attchment from SAP application to different domain address ?
How about adding Default domain address in SCOT ?
request you to trhough light on this issue.
thanks in advance,
by
raghava rao

Hi,
after configuring Smtp connection between SAP ECC and Exchange server. i'm able to send documents to people who's mail address are maintained in user master record .
su01 > maintaining e-mail address for all sap users.
whith in this list i'm able to send SAP attachements.
But, only to @xyz.com (exchange server belongs to XYZ company and XYZ domain)
if we maintain other domain address in the user master record.
i.e.. for one sap user if we maintain e-mail address as @[email protected]
SAP attachements can't be sent to different domain mail address.
where it is getting stopped ?
Exhange server or SAP server stop sending the attchment from SAP application to different domain address ?
How about adding Default domain address in SCOT ?
request you to trhough light on this issue.
thanks in advance,
by
raghava rao

Send binary files from SAP System to SAP XI/PI

Dear experts,
in our SAP ERP-System we have a link to JPG files which are stored in an archive. We want to send these files with some other information to our SAP XI and then store them on a file server. Is there a way to send a MIME attachment via RFC? Or is there another way to send binary files from SAP ERP to SAP XI? We want to avoid polling the files on OS level.
Thanks and regards,
David

Most recommended way is to go for ABAP proxies. They support attachments.
Regards,
Prateek

How to send email alert to users from the query output ?

Hi all,
I intend to write a pl/sql to send email alert to user based on the following query output :-
Item_______Qty_on_hand________Min_qty______email
[email protected]
[email protected]
[email protected]
once run, I will like to distribute to those email id. How should I code that in pl/sql ? or any other better idea is welcome. Thanks.
Rgds
Lim

http://asktom.oracle.com/pls/ask/f?p=4950:8:3439330610438686683::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:255615160805,

Getting backup battery to send email alerts....?

Hello! I've got an APC RS1500 UPS hooked up to my Mac Mini server running 10.6.
Obviously, I've already used System Preferences to configure how we want the battery to manage the power to the machine in the event of an outage. But since APC's PowerChute software (which, from what I understand, used to have the ability to send email alerts in such a case) only works up until about 10.4 until they started implementing the native support we have "lost" the ability for the server to send out an email alert whenever should there be a power issue.
So far, I've found no native way to do this within OSX and the APC software that used to do this for you is no longer supported on 10.5 or 10.6.....how can we do this?
I'm looking for something, anything, really to just get the server to send me an email should the power go down. Terminal command, Automator workflow, AppleScript, third party software....whatever.
Just....something?
Surely there are other people out there running Mac servers on a battery backup with some kind of notification system in place?
Thanks in advance.

Pingdom does what you are asking for. It detects the web server outage. It sends email, SMS or a tweets. And it's a free service.
If you're working on an internal server of some sort (or otherwise outside of what pingdom can reach), then this is going to involve a quick script, or some add-on software.
If you're working on the script, do you have a local mail server running on this box? (That'll make sending mail easier.)
And do you want to know about every outage, or do you want notifications when the shutdown happens? (If it's the latter that you're after, then you can send mail from the shutdown script.)
Some of the more capable and less-interruptible power supplies have notification capabilities. (eg: APC less-interruptible power supplies with the APC Web/SNMP card.)
The apcupsd tool might be of interest, too. Whether that update works on Mountain Lion, I don't know.

My ical calender does not send email alerts anymore, now what?

The alerts are configured correctly, if I look at the alert it says that an email will be send (for ex. 09.00 the day before). However when the moment comes, the email does not. Can anyone help me with this one. This is the case since the upgrade to Mavericks.

Hi Patrick, I have the same problem as does everybdy else I guess - it just wont work!
I have set My Card in address book, tested it 100 times and whatever you do it ill not send an email alert? Everything I see on forums blah blahs about setting my card in address book and hey presto but none of it helps.
Someone MUST know if it will ever work or if it is another issues that apple will never resolve, instead they will just ruin a perfectly nice looking operating system by updating it and making my phone icons and notes / bookshelf etc look like it was bought from Toys R Us instead of an Apple store!
Did you find a solution to iCal not sending email alerts? DAVID.

Email alert from Solution Manager

Hi
I have configured both System and Business Process Monitoring in SAP Solution Manager.
I can catch all the errors and display them in the graphical view, I can see details and so on.
Unfortunately I don't receive any email alert from Solution Manager.
Could somebody provide me a check list to verify where's the problem and why I can't receive email alert?
Thank you
Alessia

Hi Alessia,
I´d like to help you, but could you plz provide me some more information about your configuration: auto reaction methods, scot, type of monitors etc.
Dom

Loading of transaction data from SAP ECC system failed

Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
Holger

Hi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!

Issue in creating Credit Note for road carrier invoice from SAP TM system

Dear All,
I am facing issue in creating Credit Note for road carrier invoice from SAP TM system.
The following steps I have performed:
1)
1)    1) Create Freight order with Amount 20,100
2)     2) Create Freight Settlement Doc and send it to ECC. Hence PO and SES will be created in ECC with Amount 20,100
3)     3) Invoice verification (MIRO) done w.r.t. FO in ECC with Amount 20,100 and following entries posted :
Carrier A/c - 20,100Cr
GR/IR A/c – 20,100 Dr
4)    4) Created Credit Note in SAP TM against freight order with Amount 1,010 and transfer it to SAP ECC.
5)    5) By this a new PO and SES was created with negative values (with amount 1,010) in SAP ECC
6)    6) In transaction MIRO, Credit Memo was created against the freight order.
7)    7) By this it is showing value 21,110 by adding the line items of Original Purchase Order and Credit Note Purchase Order as 20,100 and 1,010 respectively.
8)    8) By posting this following are the accounting entries which is not correct:
Carrier A/c – 21,110 Dr
GR/IR – 20,100 Cr
GR/IR – 1,010 Cr
9)    9) In report FBL1N which is showing the remaining liability of value 1,010(21,100 – 20,100) instead of 19,090 (20,100-1,010=19,090) for the carrier.
Please suggest how to resolve the issue and get the correct accounting for credit memo?
Regards,
Vibhu Gupta

Hello,
Like my reply in Linkedin group, I got the same issue and solved with BADI in TM side(REQREQ...).
Regards, Marcelo Lauria

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

Send short message from Java application on mobile phone to server; http

Hello!
My question is: can I send short message from Java application on mobile phone to server - with the use of SMS (WMA) or http connection?
I found this topic http://forums.sun.com/thread.jspa?threadID=5405431 about: "how to send data from midlet to servlet using doPost method".
There is also such topic http://forums.sun.com/thread.jspa?threadID=5408046&tstart=0 about: "CLDC and MIDP - sending SMS to server -> Wireless Messaging API (WMA)".
Please, kindly help me.
Code from the topic mentioned above, edited by me so that it can be read easily:
//http://forums.sun.com/thread.jspa?threadID=5405431
//CLDC and MIDP - Re: how to send data from midlet to servlet using doPost method
I want to know how to pass the values .
for examples : this is what i wrote for doGet
String url = setting.getUrl().toString()"/testProServlet/servlet/UpdateCompanyProfile?userId="+loggedInUserId"&svComp="saveCompHex;
userId and svComp has the data which is very long so i wanted to use doPost.
Now i dont know how to do it.
This is what i have done in doGet (midlet)
public void saveCompanyProfile(String saveComp,int flag,String blankFieldNm)
     System.out.println("flag===" flag);
     if (flag==1)
          displayAlert("Company Profile Edit",blankFieldNm+" field cannot be blank.",AlertType.ERROR, edCmpRecForm, true);
     else
          String saveCompHex = helper.encodeHexString(saveComp);
          // String saveCompHex =saveComp;
          HttpConnection httpConn = null;
          serverSettings setting = new serverSettings();
          System.out.println("saveCompHex===" saveCompHex);
          String url = setting.getUrl().toString()"/testProServlet/servlet/UpdateCompanyProfile?userId="loggedInUserId"&svComp="saveCompHex;
          System.out.println("url of save company profile:: "+url);
          InputStream is = null;
          OutputStream os = null;
          try {
               // Open an HTTP Connection object
               httpConn = (HttpConnection) Connector.open(url);
               System.out.println("urlMidlet1 save edited company data===::" url.length());
               // Setup HTTP Request
               httpConn.setRequestMethod(HttpConnection.POST);
               httpConn.setRequestProperty("User-Agent","Profile/MIDP-1.0 Confirguration/CLDC-1.0");
               System.out.println("urlMidlet2===" url);
               int respCode = httpConn.getResponseCode();
               System.out.println("respCode edit company profile=====" respCode);
               if (respCode == httpConn.HTTP_OK)
                    StringBuffer sb = new StringBuffer();
                    os = httpConn.openOutputStream();
                    is = httpConn.openDataInputStream();
                    int chr;
                    while ((chr = is.read()) != -1)
                         sb.append((char) chr);
                    String sResultSvCompanyProfile= sb.toString();
                    System.out.println("+++++++++++++Company sResult+++++++++++++==="sResultSvCompanyProfile);
                    if (resultViewCompanyProfile.trim().equals(""))
                         System.out.println("++++++++++++++If++++++++++++++SaveCompanyProfile===");
                         displayAlert("Login Incorrect","Username and Password incorrect", AlertType.ERROR, mainForm, true);
                    else
                         System.out.println("++++++++++++++Else++++++++++++++SaveCompanyProfile===");
                         //companyProfile();
                         displayAlert1("Information","Company Profile edited successfully", AlertType.INFO, profileMenuScreen, true);
               else
                    System.out.println("Error in opening HTTP Connection. Error#" respCode);
                    //the line below divided into two lines because it was too long
                    displayAlert("Connection Failed","Cannot connect to server, please contact the Administrator.",
                    AlertType.ERROR, mainForm, false);
          catch(IOException e)
               e.getMessage();
          finally {
               if(is!= null)
                    try
                         is.close();
                    catch (IOException e)
                         // TODO Auto-generated catch block
                         e.printStackTrace();
                         displayAlert("Connection Failed","Cannot connect to server, please contact the Administrator.",
                         AlertType.ERROR, mainForm, false);
               if(os != null)
                    try
                         os.close();
                    catch (IOException e)
                         // TODO Auto-generated catch block
                         e.printStackTrace();
                         displayAlert("Connection Failed","Cannot connect to server, please contact the Administrator.",
                         AlertType.ERROR, mainForm, false);
               if(httpConn != null)
                    try
                         httpConn.close();
                    catch (IOException e)
                         // TODO Auto-generated catch block
                         e.printStackTrace();
                         displayAlert("Connection Failed","Cannot connect to server, please contact the Administrator.",
                         AlertType.ERROR, mainForm, false);
          } //end finally
     } //end else (?)
} //end savecompany

hi,
SMS API(WMA) is an optional package. It is not a MIDP1.0 or MIDP2.0 api's.
There are phones which has WMA api with MIDP1.0 support .... Nokia 3650
Seimens has some phone with their own api's to send sms.Check out seimens site for more info
BTW, What do you mean buy sending SMS to Server????
If you want to send message to server you can do it with Http.
HTH
phani

Sending 2 messages from SAP but get 1 message in PI

Hi all,
This is a bit of a strange one but I have the situation where we send two idocs at the same time from a SAP ECC system to PI. The first idoc is processed but the second one just dissapears. Things I have checked:
SMQ1/SMQ2 on both systems - nothing there
Runtime workbench - the successful one is there but no failed messages
Sending two messages from another ECC system - we do get both messages - but this is a different interface (however the one with the problem is just a copy of the one which works)
Any ideas what this could be or what else I should be checking?
Kind regards
Ben

Hi Mark,
Thanks for your quick reply. I have checked idx5 and there is only one message/TID from the sending system.
The other ECC system is owned by a different department so I will ask them to run SM58 to see if anything is stuck in there as well

How will we send smtp mail from SAP via Exchange

Hi;
We changed SAP OS between Windows and Linux and still 4.6c . Now we use linux OS.
We used smtp mail at SAP via Exchange with 3.party (sendmail,indigomail etc.) But Now I dont know how will we send smtp mail from SAP.
Please help me,
Thanks for answers.
Moderator message: not directly related to ABAP development, please have look in the Netweaver forums, also search for available information on sending emails.
Edited by: Thomas Zloch on Nov 22, 2010 2:39 PM

Hi,
What is the nature of the URL you wish to include in the e-mail ?
Is it fixed or dynamic ?
Cheers
Colin.

Sending email alert from SAP Application System

Similar Messages

Maybe you are looking for