Sending email from 3rd party software

We have migrated from Outlook to TB running Win7 and Win8 platforms, we also use internal developed software which use MAPI protocols to send email. TB is now setup as the default mail client and when the software tries to send an email the software can't find TB as the default mail client.
The question is: which protocol should we use to send emails via TB. When the software tries to send an email with the MAPI settings it comes back with a message that Outlook can not be found. The emails are tracked and the sent email must end up in the sent folder of the mail client

When you right-click on any file and select Send To > Mail Recipient, does it open Thunderbird with that file attached? If not, the default e-mail client isn't correctly configured.
Windows can be stubborn preferring its own applications as default rather than others. See http://kb.mozillazine.org/Default_mail_client for some hints.
It may also happen that an application is hard-wired to use Outlook, then there may not be much that can be done other than complaining to the company.
If MAPI doesn't work, Thunderbird can also be invoked from the command line, e.g., when the program supports scripting.
http://kb.mozillazine.org/Command_line_arguments_-_Thunderbird

Similar Messages

Outlook "The Operation Failed" - Sending emails from 3rd Party Apps

I have an issue similar to this one
http://community.office365.com/en-us/f/158/t/272002.aspx
This started a few weeks ago for some users. Users cannot send emails generated from 2 3rd party apps. They get the error "The Operation has failed".
Not all users are affected but the only solution is to turn on Cached Mode in Outlook.

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Migration of Documents from 3rd party software to SAP DMS

Dear Experts,
We have implemented SAP DMS . Prior to DMS we were using Third party software for creating and storing the documents.
There are abot 3000 documents in the third party software, now the challege is how we must have to migrate the DATA from 3rd party software to SAP DMS with creating Dirs. Are there any upload programmes suffice the requirement or any development needs to be done or any possibilities.
Kindly help me out in the above scenario.
Regards
jayanth

Hi,
from DMS point of view I think that SDXA functionality could also be useful for this action. For further information on SXDA functions please see SAP note 817743.
Best regards,
Christoph

Raising a notification from 3rd party software

Hi
We have a client looking at raising notifications within the asset management system of SAP via a sql/.net software application. The 3rd party software has a defect register which could be used to open the SAP notification. We would like to populate the fields automatically when the notification is opened.
Is there a current feature within SAP to raise single or multiple notifications via a 3rd party application?
Cheers
Russell

Hi russel,
Things are where they were.
Any Function Module(BAPI here) is the ABAP part. So the solution involves 3 parties. The BAPI suggested helps in creating a Notification by receiving parameters as Inputs. Where these parameters come from? These come from 3rd party software (you called so) through interface (XI here)
Flow is like this.
Interface (XI) - Receives parameters from your Browser (assumed you called it 3rd party) and translates into SAP field names and values.
ABAP - Receives these inputs, feeds to the BAPI the output of which is a Notification.
Note:
BAPI_ALM_NOTIF_CREATE is a Notification creation tool (Function module) in ABAP. This receives SAP field values as inputs and generates a Notification. It has got a wide range of applications in regular SAP developments.
Regards
KJogeswaraRao

Would it be possible for time machine to back-up files from 3rd party software such as windows platform using parallel?

I'm wondering if it would be possible for time machine to back-up files from 3rd party software such as Windows XP using parallel software especially if it is isolated from mac? Any advise would be greatly aprreciated.

Short answer - yes Time Machine will backup everything within the Mac OS system.
Longer answer - Parallels creates a pvm disk image "Parallels Virtual Machine" which Time Machine backs up.
Due to the changes to the pvm file Time Machine is unable to read the minor changes and will somtimes do a full backup of it each time Time Machine runs and can chew through Back up drive space quite quickly.

Unable to extract updates from 3rd party software

When trying to update 3rd party software on my MacBook I get the forllowing error "An error occurred while extracting the archive. Please try again later." . I have no clue what to do. Does anyone else have an idea?

I checked the web sites, and both have the current version available as a dmg download. You might try just downloading the latest version from respective web sites, see if you can then mount the dmg and install the latest version that way. It sounds like for some reason the built-in updater in the programs is having a problem in Snow Leopard.
Francine
Francine
Schwieder

Upload public website to Sharepoint Online from 3rd party software.

This must have been asked before but I can't find it!
How do I upload a website created with a third-party app (NetObjects fusion in my case) to my public website? I'm afraid that the built in designer is just not comprehensive enough.
Roy

You don't?
SPO/O365 public websites are SHAREPOINT sites... they are NOT just a blank slate to put whatever files you want into an IIS site.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Posting from 3rd party email addresses

Hi folks,
I have researched this matter as much as I can but am still having problems.
Anyone familiar with sending emails from 3rd party email addresses via Windows Mail (Vista Home premium)?
I use Windows Mail for my sins and am fairly familar with it.
I have verified my email addresses with yahoo and activated the verification emails sent.
I still cannot send emails via the server mail.btinternet.com.
Anyone familiar with sending emails from 3rd party email addresses?
This ia the error message:
Server: 'mail.btinternet.com', Protocol: SMTP, Server Response: '250 8BITMIME', Port: 25, Secure(SSL): Yes, Server Error: 250, Error Number: 0x800CCC7D
In Windows Mail
Incoming server is pop3.tiscali.co.uk
Outgoing mail.btinternet.com
My server requires authentication is selected.
Outgoing Mail server log on info.
Email User Name: mymainbt/[email protected]
Password : correct for above account
Remember Password: yes
Log on using secure password authentication: have tried with it on and off
Under advanced:
Outgoing server
Server address: 25
This server requires SSL: Yes.
As stated I have verified this account with BT Yahoo
I am able to set the same Windows Mail account to send via my gmail account easily.
Any suggestions please?
TIA David
Solved!
Go to Solution.

DavidUk1 wrote:
Hi folks,
I have researched this matter as much as I can but am still having problems.
Anyone familiar with sending emails from 3rd party email addresses via Windows Mail (Vista Home premium)?
I use Windows Mail for my sins and am fairly familar with it.
I have verified my email addresses with yahoo and activated the verification emails sent.
I still cannot send emails via the server mail.btinternet.com.
Anyone familiar with sending emails from 3rd party email addresses?
This ia the error message:
Server: 'mail.btinternet.com', Protocol: SMTP, Server Response: '250 8BITMIME', Port: 25, Secure(SSL): Yes, Server Error: 250, Error Number: 0x800CCC7D
In Windows Mail
Incoming server is pop3.tiscali.co.uk
Outgoing mail.btinternet.com
My server requires authentication is selected.
Outgoing Mail server log on info.
Email User Name: mymainbt/[email protected]
Password : correct for above account
Remember Password: yes
Log on using secure password authentication: have tried with it on and off
Under advanced:
Outgoing server
Server address: 25
This server requires SSL: Yes.
As stated I have verified this account with BT Yahoo
I am able to set the same Windows Mail account to send via my gmail account easily.
Any suggestions please?
TIA David
Hi. Welcome to the forums.
As mentioned, unset SSL when using port 25. You could try using port 587 (again without SSL set).
If you still get an error message when trying to send, can you post that ?
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Calling 3rd party softwar from ABAP

hi all,
I would like to know is it possible, if yes, how to perform a call to launch external 3rd party software from ABAP (example, half way in process of a BDC session) and pass back the information from 3rd party software back to ABAP.
Thanks in advance!
Regards,
JL

Hi,
For that please refer to the following link:
http://help.sap.com/saphelp_nw70/helpdata/en/80/b711d7d6d03d4a956f16bb854a186e/frameset.htm
Regards,
Renjith Michael.

Allow 3rd party software to collect emails from Exchange server 2010

i have a hosed client based ticket system that i use for my internal and external customers. i would like to have each person who wants to create a ticket use and an email address [email protected]
I've already created the email address and it works for internal and external. you can access the account using OWA. the problem i'm having is the hosed 3rd party software wants to connect and collect emails every 15 minutes. the directions they have use
IMAP and POP. how do i allow that 3rd party to collect emails from that email address? without created a security hole? don;t want to be hit by spammers or be on a blacklist. please help

Hi Donlancellotta,
From your description, I'm so confused that can't understand what your requirement is.
Could you explain more about your requirement?
What is the "collect emails" mean?
Best regards,
Niko Cheng
TechNet Community Support

Will upgrading on to OS X Mavericks (from Snow Leopard 10.6.8) affect the running of the installed 3rd party softwares/programs?

I have just received an email encouraging me to upgrading on to OS X Mavericks (from Snow Leopard 10.6.8). Currently I do have in my computer several 3rd party software and programs (from Adobestuff, finalcut Pro, MS Office, ILife etc.
Will upgrading to OS X Mavericks affect the running of these software /programs? Will I need to also upgrade these softwares?

There may be issues with compatibilty, as with any OS upgrade. Snow leopard (10.6.N) includes a piece of software from Apple called Rosetta. This software allows older PowerPC applications to run on Intel based Macs. This software does not run on any OS X higher than the latest Snow Leopard, 10.6.8. You can see if you have any of programs that require Rosetta installed by bringing up the "System Information" application through spotlight (click on the magnifying glass icon on the upper right, type System Information in the search field and select the application thta is found).
Once in System Information select "Applications" under "Software" near the bottom of the list. Scroll through the list of applications and if any indicate that they are PowerPC based then they will not run under Lion, Mountain Lion or Mavericks.
Hope this helps.

How do I transfer photo files from desktop to ipad without 3rd party software?

how do I transfer photo and music files from my laptop to ipad2 without purchasing a 3rd party software?

You can use iTunes which is free (http://www.apple.com/itunes) - and that is the only way to sync music from a computer to the iPad
Syncing photos via iTunes : http://support.apple.com/kb/HT4236 . You need to sync all photos that you want on the iPad together in one go, as only the most recent remains on the iPad - not including photos in a subsequent sync is how you delete them from the iPad

I have a PVR which supports DLNA connected to my home network. I want to access files on my MacBook from the PVR. I understand that my MacBook doesn't support DLNA. Is there any 3rd party software that I can install on my MacBook to provide DLNA?

Hi,
Can anyone help me please.
I have a Personal Video Recorder (Humax HDR-1010S), which supports DLNA, connected to my home network via Wi-Fi.
I want to play music from iTunes and view photos from iPhoto from my MacBook (which is also connected to the home network) via the PVR / TV / Home Cinema sound system. I understand that my MacBook (running OS X Mavericks) doesn't support DLNA server.
Is there any 3rd party software that I can install on my MacBook to provide DLNA server?
Thanks,

My recollection is that the iPhoto library has some fairly robust protections to prevent inadvertent or even deliberate changes being made that might have unwanted consequences. I'll take alook at my setup and let you know if I can see anything that might help you. Even if you get Serviio to "see" the iPhoto library, it almost ceratinly won't show the album structure and names. What I did is to export each iPhoto album to a standard folder with the appropriate folder name. These I keep on an external backup disc and Serviio can see these without trouble.

Prevent shockwave player from trying to install 3rd party software?

I am a sysadmin for a relatively small-ish enterprise (around 50-ish PCs). We have scripts which push out shockwave player to all our systems but when a user loads a page which requires shockwave, they get a UAC prompt because the player is trying to install 3rd party software (usually Google Chrome browser). How do I stop this from happening? Is there a command line argument I can set (preferable method) or some other centrally-managed method for turning this off? Thanks in advance.
M

I guess I am not explaining myself very well.
I am currently using the EXE full installer from the distribution page. The installation works very well and I can get it to run in "silent" mode to avoid interaction with the user. Once the installation finishes, and I load a web page which requires Shockwave player, I get prompted at that point to download/install Chrome. That is the part I would like to know if it's possible to stop, because all our users are getting UAC prompts and it's always because Shockwave wants to run some installer after loading. I had hoped that going to the distribution version (as opposed to the straight download from the Adobe.com home page) would resolve this but they seem to be the same version, which makes me wonder why I bothered to sign up for it in the first place.

Cannot send emails from mac email address

Over the past 24hrs I am unable to send emails from my ibook and sporadically from my iphone. Please advice what the settings should be for SMTP and port. I think this might be the problem but I am unsure. I have a mac email address. I can send emails from my icloud account. Any help would be appreciated. Thanks

Wow, after research I can't believe what a problem BT is!???
This post by vanessa seems to have gelped many that could not send...
Just set up my macmail with the help of the BT guys after a year of struggling! Hopefully this could work for others for whom the emails will receive but NOT send....
Set up your 3rd party domain names via the mail relay system and confirmed via BT. Then try these settings.....
In your @btconnect.com email set its up using these:
incoming mail server: pop3.btconnect.com
username: the bt email
password: the bt email password you supplied
outgoing mail: we'll come to this!
on the drop down box next to Outgong mail server (SMTP) select 'edit SMTP server list'
press '+' button and add these details....
In the Account information tab:
Description: mail.btconnect.com
Server Name: mail.btconnect.com
In the advanced tab:
Select 'Use default ports'
Authentication: Password
username: the bt email
password: the bt email password you supplied
NOW The next bit, the 'second' server....
press '+' fro a new server add these details....
In the Account information tab:
Description: second server (or any name you want)
Server Name: mail.btconnect.com
In the advanced tab:
Select 'Use default ports'
Authentication: NONE!
Now on all your email addresses back in the accounts section, set the SMTP server to 'second server' (or whater you hae called it) NOT mail.btconnect.com and select Use only this server.
http://business.forums.bt.com/t5/Email/How-to-Set-Up-Mac-Mail-OSX-Lion-inc-mail- relay-Message/td-p/30323

Sending email from 3rd party software

Similar Messages

Maybe you are looking for