Sending IDOC without any mapping

Hi,
My requirement is to push the IDOC from SAP system to the external party.
We dont need any mapping.Simpky to push and send to third party.
Can you please tell which all objects need to be created for this scenario.
Thanks,
Vikas

hi Vikas,
You dont need to create any IR objects. Just create ID objects & use virtual(any names) Message interface & namespace whereever required. this will do the trick.
check this blog for exact pointers:
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Regards,

Similar Messages

Hey! so i am traveling out of the country. I am extremely confused, if I turn on air plane mode and enable wifi, can i send iMessage without ANY extra charges for being international? Also, what are other good ways to do this and not be charged?

I really need help! also, if there is any other way i can just use wifi without being charged AT ALL would be great

iOS: Understanding airplane mode

Send attachment via Receiver FILE/JMS adapter without using any Mapping.

Hi,
R/3 program creates one (encoded) text file, which I want to send via Proxy to JMS adapter without any mapping or FCC.
Note: I don't want to use File adapter to pick the file from R3 dir and then send it to JMS.
Reference: I have gone through below mentioned blog which produces the attachment in the XI payload but I am not able to write the same attachment to my XI dir using Receiver File adapter (File adapter is just for testing actual adapter will be used as Receiver JMS adapter).
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
Regards,
Sarvesh

> note sure why you want to complicate things here
Actually the idea was to explore the possibilities of "Proxy with attachment". And I also wanted to confirm with experts like you before going to other options. Anyway it seems it's only possible with mail adapter.
Reason for exploring above possibility: Since ABAP team has to create one text file and encode it, so we thought to call the outbound proxy in the ABAP program to send the same file as an attachment and then simply send it to JMS. Which is quite obvious thinking when you don't want to manage a share directory between R3 & XI or don't want to manage FTP user and pwd.
> i think the simplest thing is to go for a simple file to jms configuration unless you have any specific reasons for not doing so.
This we already kept in our mind as a last option in case if above thing is not possible then we can easily do it by this way.
Thanks a lot for suggestion.
Regards,
Sarvesh

File to idoc and no mapping?

Hi
We are using PI 7.0
IDOCFileSender->PI7.0->ALERECEIVER
we have a file in the "native" file format for an idoc, we now would like to process this file through PI and sending it to our SAP systems ALE layer. We are not allowed to call the ALE adapter directly in our SAP system from the system generating the native idoc format - it must be done only through PI !
My question is if it is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping? In that case what should the Message Type we are using in the file-sender adapter look like?
Hope for some help.
Thx

Hi,
>is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping?
yes
>In that case what should the Message Type we are using in the file-sender adapter look like?
If you have no mapping it doesnt matter, the message type will not be validated during runtime. You can take the IDoc type imported from the SAP system
Regards,
Udo

Send IDOC to flat file without mapping will it possible???

Hello everybody,
Iwould like to know, We have middleware tech is Webmethods. I want to send IDOC from SAP R/3 to flat file in Legacy system. how to do that? What willbe the structure of Flat file.

hi
Create a FILEPORT uing transaction WE20 and assign the fileport to your outbound message type in processing option, you can give the physical path in fileport and create the flat file format of IDOC.
hope this helps
regards
Aakash Banga

Sending IDoc Batches to SAP: Issue with Header Mapping for SNDPRN

We are sending batched IDocs from XI to SAP. We need the individual IDocs to reflect different SNDPRN values. Our mapping creates the different IDoc EDI_DC40 record correctly with different SNDPRN values. However, XI wipes out the SNDPRN values in the payload. When we define Header mapping to get the Sender Party as the XPath to the SNDPRN in the payload, then the header mapping errors out because the XPath returns multiple values.
I wanted to know if anyone has successfully implemented sending IDoc batches to SAP from XI with different SNDPRN values.
Your feedback is appreciated.
Jay Malla
Licensed To Code
Genentech SAP XI Team

Hello,
I have the same problem. I want XI send an IDOC with the SNDPOR, SNDPRT and the SNDPRN that are in the EDIDC40.
I find this in sap.help : 
Mapping
The IDoc adapter does not make any special demands on mapping. The IDoc adapter must simply be provided with an IDoc XML structure at the Integration Server outbound channel. This either already exists or must be generated by using a mapping.
If the IDoc XML structure contains a control record, it is deleted and created again by the IDoc adapter. If you want to include additional values in the control record, you must select the Apply Control Record Values from Payload checkbox in the parameters in the communication channel and provide a corresponding mapping for the values.
You can include the values from the following fields in your IDoc control record:
MESCOD, MESFCT
TEST
EXPRESS
STD, STDVRS, STDMES
SNDSAD, SNDLAD
RCVSAD, RCVLAD
REFINT, REFGRP, REFMES
http://help.sap.com/saphelp_nw04/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/frameset.htm
Perhaps we must use party configuration but I don't know how do this !
Regards,
Chris

FCC configuration in Sender File Channel Without any key field name

Hi Everyone,
We have below flat file generated from ECC using standard tcode.
The flat file is fixed length file and first record is header record followed by line items.
There is no key field name in the file name.
Can we read the file and convert into xml without any key field name?
I want to understand if the FCC configuration for above file can be done without key name or not.
Thanks,
Vertika

Hello,
AFAIK, using FCC i really doubt u can convert file into xml.
So technically, there are two options either read each line one by one and then do conversions in ur mapping or write a custom module which will read ur input file and convert into xml.
Configuring Generic Sender File CC Adapter
Thanks
Amit Srivastava

I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sending data to Message borker.(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to save file in SAP fold

I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sends data to Message borker(thru JMS channel).(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to create file with same data what ever send to Message broker and put the file in SAP folder without touching mapping. Is it possible? Please advise with the steps. We are using the ICO for this senario. Quick response is appriciated.

Hi Pratik,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
This link might help.
regards
Anupam

My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

Do you have a cellular plan with data and SMS activated?

Sending Idocs from SAP-R/3 to XI, bundle and map them to one XML-file

Hi All,
We need to send IDoc's (DEBMAS06) from R/3 to XI and bundle and map them to a single xml-file. Please help us with your suggestions on how to proceed using a simple solution (probably need of BPM).
Regards,
Theo

Hi Theo,
there is an example in SAP Library: <a href="http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm">Collecting and Bundling Messages - One Interface</a>. Plz post us your detailed quetions.
Regards,
Udo

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?
It has been quite a while since Apple came up with Map App of their own and should be releasing improved maps with more capabilities in India.
Cheers!
Abhishek

No one here can answer your question, as there is no one from Apple here, & no one here represents Apple or speaks for Apple.

Multi-Mapping in IDOC without using BPM ?

Hi ,
Please check ..
Can below given blog can be used to achive Multi-mapping in IDOC without using BPM ?
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards
PS

Solved .. Thx every one .
Approache Used :
1. Created mapping with Change signature on target Message type(idoc) with 1..N Occurence.
2. Operation mapping with change Occurence on Target Operation(1..Unbounded) .
3. Used same Operation mapping in Interface Determination with 0..unbounded(Multiplicity).

How to send image file through mail without any attachment

Plz tell me how to send image file through mail without any attachment ( i mean not converting that image into pdf or any format ) i want to send that text or image through mail .

Hi Sandeep,
I think you can setup the type of email in Shared office Settings in transaction S016.
There is an option called <Preset document classes>
You choose this pushbutton to branch to the maintenance screen for the document classes that are directly displayed to users in the Business Workplace for selection when they use the Create function. The name under which the documents are displayed can also be maintained.
http://help.sap.com/saphelp_nw70/helpdata/en/6c/69c30f418d11d1896e0000e8322d00/content.htm
Haven't tried it though.
Regards,
Siddhesh

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

Idoc texting without any EDI or EAI

Hello,
I have a text file to test in SAP with the following IDOC DEBMAS05.
Does somebody the méthodology to run the test without any middleware...
thanks
Roger

Use test tool (transaction WE19) for inbound IDOC test.

Sending IDOC without any mapping

Similar Messages

Maybe you are looking for