Sending Idocs to R/3 Error when Business Service with a party is configured

Hi All,
I'm facing some issue when posting idocs (FINSTA) back to R/3 when Business Service with a party is configured in my Integration Directory. However, I do not have this problem, if the
Business System without Party is configured. It seems that 'adapter specific' setting doesn't
seem to work when you have a party.
I have read the same problem faced by other SDN members as well, some suggested to have the latest patch to solve the problem. FYI, I'm using latest patch SP 15, but the problem still exist. The error that I have in the sxmb_moni is "Unable to convert sender XI party http://sap.com/xi/XI / XIParty / GABXI100 to an IDoc partner".
Please assist. Thanks.

Hi Arun,
Thanks for reply.
What do you mean by XI Party must map to a party in the R3 in the partner profile?
For example, If my Party Name in Integration Directory is ABC01, I should create a partner profile of ABC01 in my R3? How if I have business service under the Party ABC001, what should I configure in my R3?
Currently My Partner Profile in R3 is type 'B' - Bank.
Thanks for helps.

Similar Messages

Error creating business service with EJB transport on Unix

I have ALSB 3.0 installed on a Unix system and I am unable to create a business service based on the EJB transport. After I associate the client jar to the business service, ALSB recognizes the home and remote interfaces in the jar file but as soon as I click the Next button I see the following error:
An expected exception occurred during the creation or update of this service: null
If I install ALSB 3.0 on Windows then I am able to create the identical EJB based business service that fails on Unix.
Has anyone been able to create an EJB based business service on Unix or is this a known issue with ALSB 3.0?
Thanks for any help!

Hi irgendwo,
user profile server must be required when you need the to enable the People Search feature. and this pre-request.
you can confg search but you can used because there are many service which are depeded to each other
check the link for depended services
http://technet.microsoft.com/en-us/library/ee662538%28v=office.15%29.aspx
Please verify all the depended service as well which is required in serach service...
see the below link from MSDN about serch service application ..
http://blog.ciaops.com/2012/12/search-service-on-foundation-2013.html
http://blog.ciaops.com/2012/12/search-service-on-foundation-2013.html
Please mark the Answe and vote me if it will you while search configuration

Internal error when redefinind service with entity types and associations

Dear gateway specialists,
I have created a gateway service with several entity types and several associations together with corresponding navigation properties.
Then I have created another service in which I want to redefine the first service with all the entity types and associations.
But the redefinition ends with an internal error (message no. /IWBEP/SBCM001) and the navigation properties are not imported (entities and associations seem to be o.k.).
What could be the reason for the error? And why might the navigations not be imported?
Thanks!
Regards,
Juergen
P.S. I found SAP note 2027049 "Service Builder Redefiniton - Extend of Odata service with Associations" which I've implemented, but without success

Hi,
on debugging I found out that the changes coming with SAP note 2027049 are actually causing the problem:
In method DO_EXECUTE_COMMAND of program /IWBEP/LFG_MOD_GENI02 the note inserts the following piece of code:
IF gt_odata_associations IS NOT INITIAL.
LOOP AT gt_odata_associations ASSIGNING <ls_association>.
       READ TABLE gt_odata_entities ASSIGNING <ls_entities>
          WITH KEY name = <ls_association>-left_end.
       IF sy-subrc = 0.
            READ TABLE GT_ENTITY_TYPES ASSIGNING <ls_entity_types>
               WITH KEY name = <ls_entities>-name.
            IF sy-subrc = 0.
                 READ TABLE gt_navigation_props ASSIGNING <ls_nav_prop>
                    WITH KEY source_entity_id = <ls_entity_types>-entity_id.
                 IF sy-subrc = 0.
                      ls_entity_np-name = <ls_nav_prop>-name.
                      ls_entity_np-technical_name = <ls_nav_prop>-external_name.
                      ls_entity_np-relation_ship = <ls_association>-name.
                      ls_entity_np-from_role = <ls_association>-left_end.
                      ls_entity_np-to_role = <ls_association>-right_end.
                      APPEND ls_entity_np to <ls_entities>-nav_props.
                 ENDIF.
           ENDIF.
       ENDIF.
ENDLOOP.
ENDIF.
SORT gt_odata_entities BY technical_name.
But the statement
     READ TABLE GT_ENTITY_TYPES ASSIGNING <ls_entity_types>...
is not correct. It leads to wrong results if an entity has more than one navigation properties as the key is not fully specified.
Regards,
Juergen

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

ORA-04062 error when running forms with different users

ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ;

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name

Hi,
I have created a web service in SAP ECC from a RFC.
While configuring the web service in SOA management to publish it, getting error SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name
How to resolve the same.
Thanks
Tanmay

Hello Tanmay,
Are you including quotes (') in the name, I assume not?
Regards,
Siddhesh

Custom hostname verifier not used when business services use a http proxy

On OSB 10.3, we have a business services with an https end point. To access this end point, the business service used an http proxy.
The certificate of the business endpoint is a wildcard certificate *.certificate.be . So we have a custom hostname verifier defined in the ssl configuration on the weblogic Server
As we can see with the verbose mode at the jvm, the custom hostname verifier is not used when we use a http proxy in the business service. Osb use a ALSBHostnameVerifier and this one the defaulthostName
<Mar 2, 2011 7:31:11 AM CET> <Debug> <AlsbTransports> <BEA-000000> <*** Connecting via proxy *** HTTP @ my.proxy.be/XXX.XXX.XXX.XXX:8080>
[Loaded com.bea.wli.sb.transports.http.ALSBHostnameVerifier from file:/bea/osb_10.3/lib/sb-transports-main.jar]
[Loaded weblogic.security.utils.SSLWLSHostnameVerifier$DefaultHostnameVerifier from file:/bea/wlserver_10.3/server/lib/weblogic.jar]
Is there any way to force business service to used hostname verfifier defined in weblogic ssl server config?
Thanks

This is a known issue. Raise a case with support and ask a patch for bug#9182604
Regards,
Anuj

Error when make controller with MVC entity framework

error when make MVC with entity framework, WHY??

Hi Arif Kalbu,
It would be better if you could share us the detailed error message, so I could provide useful informaiton or provide the correct forum for this issue, you know that this forum is to discuss the VS IDE.
But if the real issue is related to the MVC project, maybe the ASP.net forum would be better: http://forums.asp.net. If then, you could get an answer more quickly and professional. Thanks for your cooperation.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error when getting service facade : Service manager initialization failed I

Dear Friends,
we have created entities in CAS((nwds 7.0.1)) and deployed in J2ee.
During Testing:
when we right click on entity and click on test.
service Browser. is opening with two Buttons.
One Button it is " start with CAF source".
when we select this its throwing error
Error text:
Error when getting service facade : Service manager initialization failed Illegal argument exception: Unable to create javax.ejb.EJBObject. because of this we are unable to test the entity.
request to throw pointers to clear this error.
Answers will be rewared.
Regards
shekar chandra

even if go using this url http://hostnae:portname/caf
i could see the main page then i click TestTools->Service browsser, Still lso i am getting the same screen with Buttons.
one saying "Start with CAF Source" @ other "Start with ABAP
Source"
If .ear is one of the cause I have removed all the projects from DC->.dtr.Now my NWDS is empty.
Still why it is comming.
Regards
Shekar Chandra

Error when creating service node. [rc:special_service_error]

Hi,
I have updated or created Inbound Service Interface in PI ISR, but when i acitivate the SI in SPROXY, the following message raised:""Error when creating service node. [rc:special_service_error] Method: ServiceCreate; return code: 3 Exception of class CX_SRT_WSP_ICF",
anyone can solve this issue,thanks?
Gongtao

Please check with your SAP Security Team if you have complete authorization/roles to generate proxies.
See related issue on this link: Inbound Proxy Error - JDBC to PROXY Scenario
Regards,
Jenny

SAP DMS : Error when opening document with ECL control: INVALID_DATA

We are receiving following error while try to view .FAX file through SAP Document viewer
"2D viewer - Unable to opend Document"
"Error when opening document with ECL control: INVALID_DATA"
Appreciate your quick effort.
Thanks,
Sam.

Yes, We have checked in both ways, I have also followed other threads on the same issue
But not able to find the solution for the issue. We are facing the issue when we are using files scannned by Kodak Scanner i1420 in tiff format.
But If I will attach any other tiff files from directory then It can viewed through SAP Document Viewer.
I appreaciate your help in this regards.
Thanks,
Sam,

10.1.3.1 : Developing Business Services with ADF BC tuto issues

Hi,
I was doing a learning session at my office based on the 'Developing Business Services with ADF Business Components' tutorial : http://www.oracle.com/technology/obe/obe1013jdev/10131/bslayer/bslayer.htm. The topic Creating ADF Business Components > 9 shows how to create EOs, VOs, AM and the corresponding UML diagram.
When using JDev 10.1.3.1 :
* the diagram is not generated as expected,
* the java domains are not created from DB domains.
Under JDev 10.1.3.2 :
* the java domains are created from DB domains,
* the diagram has been generated on 1 out of 3 computers.
Any clues on what's going on or any known bugs ?
Thanks,
Seb.

Hi,
Today in 10.1.3.1 the diagram generation just works. It seems the keepResident extension was causing troubles as the exception stack trace mentioned its name... I just removed it.
But still, the domains are not generated as expected. I've made several tests even in a fresh installation of JDeveloper 10.1.3.1.
Seb.

Dynamic routing for a Business Service with multiple operations

I have two business services with multiple operations. Business service A (bsA) has operations OpA1 and OpA2. Business service B (bsB) has operations OpB1 and OpB2.
Depending on incoming Proxy message and operation, I have to do one of the following
1. If someValue = A and operation= Op1 then invoke operation opA1 of bsA
2. If someValue = B and operation= Op1 then invoke operation opB1 of bsB
3. If someValue = C and operation= Op1 then invoke operation opA1 of bsA AND* operation opB1 of bsB and return aggregate data of both invocations
1. If someValue = A and operation= Op2 then invoke operation opA2 of bsA
2. If someValue = B and operation= Op2 then invoke operation opB2 of bsB
3. If someValue = C and operation= Op2 then invoke operation opA2 of bsA AND* operation opB2 of bsB and return aggregate data of both invocations
Using a dynamic route node or dynamic routing options, I am able to achieve cases 1, 2, 4, and 5.
But for cases 3 & 6, I can not use a route node. When I use a Service call out instead, then I am forced to create a Operational branch but that does not seem like the best design since for every new operation added to the business services, I have to add a new branch to the Operational branch and redo all the functionality for that branch.
Basically, I am looking to achieve the functionality of the Route node ( no need to specify the operation ).
Any thoughts/ideas on what the best design would be?
thanks

For cases 3 & 6, why don't you route to another proxy service where you can simple do two service callouts, merge output data somehow and return them to the first proxy?
If you look for "special route feature", that could possibly call two services for a single message, I'm afraid you won't succeed.

Developing Business Services with ADF BC

Hello all,
I was following the tutorial at http://www.oracle.com/technology/obe/obe1013jdev/10131/bslayer/bslayer.htm#t2s5, which is Developing Business Services with ADF Business Components
AND i was wondering if i could add a custom validation that would: prevent the user from entering a Gender IF the credit limit is greater than 400? Is this possible? If so, could some point me in the right direction
Cheers

Hi,
you have two options:
1. add the validation on the ADF BC model using a method validator. This would compare the two attributes and throw an exception if the business rule is violated
2. Use a ValueChange Listener on the credit limit field (in association with a autosubmit=true setting on the field) to enable the gender field through a Partial Page Refresh. To programmatically refresh a field using PPR, you create a binding of the component to refresh o a managed bean using its binding property. Then you call
AdfFacesContext.getCurrentInstance().addPartialTarget(<component reference here>)
Frank

Sending Idocs to R/3 Error when Business Service with a party is configured

Similar Messages

Maybe you are looking for