Sending Mail after saving data in QA11
Hi all,
In QA11 my user will change or enter some quantity( to unrestricted use field ) in Inspection lot stock tab.
Whenever they change or eneter the quantity a mai(internal sap mail)l should be generated with the details of lot number,material code and quantity what they entered.
How I can achieve this...
Plz help me regarding this issue..
Thanks in advance....
Regards,
Murthy.
Hi ,
Thanks for quick reply.
I tried it, but its not triggering..
I tried the following userexits also..QEVA0004,QEVA0005,QEVA0006,QEVA0007,QEVA0008,QEVA0009,QLCO0001,QSS10001.
Could you tell me and BADI'a are there for this tcode QA11.
thanks & regards,
Murthy.
Edited by: kan murthy on Sep 17, 2009 12:29 PM
Similar Messages
-
Send mail after transaction code COR2
Hello gurus,
Anyone knows the badi or userexit which is getting calld after successfull change in TCode COR2?
I need this enhancement to send mail after successfull entery.Dear ,
Transaction Code - COR2 Change Process Order
Following are the list of user exit which are available for Process order Managment.
- PPCO0006 to predefine entries for order header fields when creating
an order
- PPCO0001 to provide information at the time of saving (for
production orders and process orders)
- PPCO0007 to check or change header data when saving
- PPCO0002 to add additional checks that are to take place when
setting the deletion flag or deletion indicator
- PPCO0003 to prevent changes in sales order items that would cause
changes in the process order for static assembly processing
- STATTEXT to format the status line
- PPCO0008 to check components that have been changed or added
Hope this will be useful
Regards
JH -
HOW TO Send mail while saving VA02
How can i send mail while saving VA02.
The mail address i have to pick from custom table based on plant.
Just for the trial we used : output type :KRML
Application : V1
Transaction medium :7.
and the program RSNASTSO routine SAPOFFICE_AUFRUF_VX is attached in the nace.
The same output type is attached in va02.If we use this output type with this medium , it is asking us mail partner
address also in the VA02.
but we have to get the mail partner from custom table.
And with this output type , the program attched in the NACE (RSNASTSO) IS NOT GETTING triggered.
But the mail is being sent to the mail partner which i mentioned in the VA02 Communication method.
How can i solve this.
Finally my requirement is i have to send a mail to exter id which is maintained in the custom table while saving VA02.
Regards
Ramakrishna LHi,
We had set a output type in NACE. and that output type we have in the VA02 transaction also.
But While saving the transaction it is not going through the program mentioned in the NACE for that output type.
But mail is sent to the SAP Inbox or official id .
how that mail is gone i am not understanding.
How can we do to go through the program mentioned in NACE while saving the VA02.
The mail body coming with text " sales order is blocked" sopme thing like this.
This same mail i have to sent to the mail id maintained in Custom table plant wise.
Regards
Ramakrishna L -
Sending mails after running the audit
Hi,
Please let me know if there is any standard workflow available for sending mails after running the audit. I want to inform students that they have failed in audit because of such and such subrequirement is not met.
Regards
Vinod KumarHi Vinod,
If you are on Ehp4 you can use the BRF as a framework to create a custom developed event/action to send out the e-mail. Or you can copy the standard bulk program of audit calculations and create to functionality to send out e-mails after the run.
There is currently no standard e-mail related to this process. You could check the standard workflow HRIQ_ADM_UG template to retrieve tasks to be copied in your own workflow (example HRIQ_APP1).
Good luck
Rob -
Problems sending mail after update
Is anyone having difficulty sending mail after the most recent ipad IOS update? Getting message saying that cannot connect to outgoing server. Know server is fine for other apple devices.
Can you receive emails on the account?
Reset/restart your router and try gain.
Try deleting the account and setting it up again. -
Can no longer send mail after installing Yosemite
can no longer send mail after installing Yosemite
Hi nwpmike,
When I uncheck "SSL" it's working well, but it's not very secure. When I leave SSL, I got in "Connection Doctor" the message "Trying to log in to this SMTP account failed. Verify that the username and password are correct.", only for the SMTP. For the IMAP, the status in Green. It's also working well on the iPhone 6 with ios8 and other mac with OS X 10.9 and previous versions.
The only thing that can be involved is that the certificat used by my mail provider is expired.
With connection docteur, there is a button "Show Details". Here is the conversation when connecting to the smtp.
READ Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-STARTTLS
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
STARTTLS
WROTE Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
STARTTLS
WROTE Oct 18 23:33:53.364 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
STARTTLS
READ Oct 18 23:33:53.432 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
220 ready for tls
READ Oct 18 23:33:53.432 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
220 ready for tls
READ Oct 18 23:33:53.433 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
220 ready for tls
WROTE Oct 18 23:33:53.642 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
EHLO [10.0.0.108]
READ Oct 18 23:33:53.698 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.699 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
QUIT
WROTE Oct 18 23:33:53.777 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
EHLO [10.0.0.108]
WROTE Oct 18 23:33:53.778 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
EHLO [10.0.0.108]
READ Oct 18 23:33:53.838 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.838 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
QUIT
READ Oct 18 23:33:53.842 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.843 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
QUIT -
Send mail after jobs get succeded in EM console
Hi,
Is there solution to send mail after jobs get succeeded and failed in EM console. if job get failed in em console the mail should send with error code .hi
any solution -
Send mail after jobs get succeeded or failed in EM console ?
Hi,
Is there solution to send mail after jobs get succeeded and failed in EM console. if job get failed in em console the mail should send with error codeHi,
For dbms_scheduler this ability is built-in from 11.2 and up. For EM jobs, you might want to ask on the Enterprise Manager forum here
Enterprise Manager
Thanks,
Ravi. -
ERMS : Send mail on saving Sales Order
HI,
How can we send mail through ERMS on saving the Sales Order. I know about ERMS...All setting are done but i don't know on which event this will get trigger. i have maintained the following rule :
If
ICWC_Order:type Equals Home 'ZXX'
Then
Forward eMil To ( Forward To = "abc@abclcom"; Forward From = acb@acbcom )
I know we can call this action in IC webclient through ESCALATION button. But how we can call this action on SAVE ORDER.
Please Help...
Regards,
AnkushHi Ankush
You can also achieve the same results using actions.
Here are some details how it works:
1. Action profile which triggers an email on Order save. Assign the action profile to Transaction
2. Smartform to put data email
3. Forward To address can picked up from Partners
4. From address can be setup in SCOT
Hope this helps
Rupesh -
How to trigger an E-mail after saving a Case
Dear all,
We need to trigger an action to send an E-mail after creation and saving a Case in EP.
Please help me how could we configure this in the system.
Your suggestions will be highly appreciated.
Best wishes
Raghu ramHi Raghu,
By using he action profile you can trigger the email once you save the transaction.
We have processing types in action profile,
1.Immediate
2.Recurring
3.After saving
In ur case you can after saving the document.
and assign the action profile to the transcation type.
Regards
Chandramohan -
Custome Workflow will send mail after 6 months from a document added
Hi,
I have created a custom sequential workflow in Visual studio. As per the requirement, the workflow will send mail to approvers after 6 months from the document added date. Is that possible? I don't want to use timer job, as there is some other issue. Can
I do the same in workflow itself? Which event will work for the same?
ThanksHi,
You can setup retention policy to start workflow after 6 months from created date:
http://blogs.askcts.com/2013/05/14/creating-a-timed-workflow-in-sharepoint-2010/
http://community.office365.com/en-us/f/154/t/252993.aspx
Hope it helps!
Thanks,
Avni Bhatt
If this helped you resolve your issue, please mark it Answered -
After up grade I can not send mail from road runner account. Message says server needs password, server says it won't support a password. Any thoughts?
UPDATE: I was able to set up the account using Eudora, and it worked fine. I guess it means that there's something funny happing with Mail.
-
Can't send mail after updating to 10.5.5
I don't know if it could be coincidence, but I had been receiving and sending email all day long until I installed the latest update (10.5.5). Since the installation completed, I have not been able to send mails (receiving is okay). The program keeps trying, but just keep son trying with nothing happening. I checked the SMTP's for my accounts — nothing has changed there. Don't know what's up.
Consider yourselves lucky. I can't send or receive email or connect to the internet AT ALL since installing whatever updates came down this morning (9/24/08). I can connect to my wireless and I can connect to AT&T using my USB wireless 3G thingy, but I can't access email or the web. Problem started immediately after this mornings Software Update rebooted my machine. I'm downloading the dmg on my work PC now and am hoping reinstalling will fix the issue(s).
-
Can't send mails after 10.4.6 update
Well, the topic pretty much says it all. After I upgraded to 10.4.6 I can no longer send mails. This happens with three completely unrelated SMTP servers, so I'm pretty sure it's a Mail problem. Receiving mails works without any problems and excepte the return of the ugly bubbles everything else is working fine as well.
I already re-entered my login values, didn't change a thing.I didn't even update. One day Mail just stopped sending mail. Can't remember doing anything specific. Looks like a common problem these days from having read several discussion boards. I'm on the bandwagon. Reinstalled, created new accounts, triple checked, checked with ISP, disabled password authentication...
I even tried downloading another mail program, Revolver, but that can't send either, so I'm stumped, both recieved mail just dandy. In Revolver it gives a better hint to the problem "SMTP Error 103 (Name Resolution Error)", Doesn't help much though. As I understand, 103 is just a general error anyway. -
Not able to send mail after Embarq took over Sprint
After over three hours on the phone with Embarq, I finally am able to receive mail but not send. They claim it is a problem with Apple Mail. I never had this proble untill the change over from Sprint to Emgarq. This is the message I receive when I try to send mail;
"This message could not be delivered and will remain in your Outbox until it can be delivered.
Verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator."
I am seriously thinking about dumping Embarq and going with cable.
Any suggestions?
DavidHi Thanks for the tips with the Embarq trouble. Just to pass on a word of success on the proper setting with these guys. The Incoming Mail Server: pop.embarqmail.com The User Name will be your email address, don't drop the @embarqmail.com it won't work without it. Enter your password for the incoming server. The outgoing will be smtp.embarqmail.com:email address. It kind of looks goofy but it just like the incoming, but swap the pop for SMTP. My server port is still set at 25 and you'll need to add the password here as well. I sent a test email yesterday. I could view it on the webmail, but had no success on Mail 2.1, until today. Thanks for the info being posted. This is not a typical setup for an account on Mail. They kept on telling me the user name was everything before the @ when in fact it's your whole email address.
Hope this helps.
Maybe you are looking for
-
When will I ACTUALLY get my new phone
Ordered my iphone 6 on 10/2 with a ship date of 10/31. Never got any kind of notification that it wasn't going to ship until I got an email on the afternoon of 10/31. Now it supposedly will ship 11/10. Should I expect to get my phone before Christmas
-
Order Management - Reservations through Inv Item Reservation
A Basic Question. We want to Link a Sales Order with Purchase Order through Inventory --> On Hand Availability --> Reservations Form. 1. What is the flow for this? Whether SO needs to be created first or PO needs to be created first? 2. Where can we
-
Why are all the close tab buttons missing?
Yesterday, I was using Firefox 25.0.1 with no issues. Today I launched Firefox, only to find that the [X] buttons for the tabs are gone! Instead, I saw a single [x] button on the rightmost side of the tabs bar, which closes the active tab. There were
-
IDVD failed to render movies...will not burn
I created a movie on iMovie and then brought it in to iDVD. When I hit burn it told me that it failed to render movies and will not burn what can I do?
-
Removing old record from nal.db?
We are using NAL reporting to monitor which applications a user is actually using. However this data is logged in nal.db, and it's growing and growing. How can we remove old data from this database? We've made an ODBC connection with ms access, but i