Sending only a specific set of employees through idocs

Hi,
I' am using idocs to send data between two SAP systems.
http://help.sap.com/saphelp_erp2005/helpdata/en/6c/b9b77f806311d2b45a006094b9c9b4/frameset.htm
The steps I followed can found from the above link.
In this scenario, I want to send the details of employees
belonging to a particular personnel area.
How I can achieve this?
Is there any way through customisation.
Thanks in advance.
Aravind

Your best bet may be to purposely reset your TC to factory defaults and then set it up again.
One thing to try from within your home LAN to see if DNS or connectivity is a problem is to simply open a terminal and "ping" the IP address of your webserver. If you can ping the webserver by IP then you are able to reach it on the Internet. Then try to ping the webserver by fully qualified server and domain name (i.e. www.example.com). If ping resolves the name to the IP of your web server then you are fine with DNS as well. If either of those basic tests fail to resolve the server and receive a reply, then you indeed have some other issue with your TC or internal network.

Similar Messages

Sending custom field added in Standard infotype through idoc

Hello All,
We have a requirement where custom field of a standard infotype 0002 needs to be sent through idoc only to a desired destination system.
My Approach:
I have created a custom segment having custom field from IT 0002 & mapped this segment in T777D table.
But the problem with above, is all the system who are receiving IT0002 will be receiving this custom segment also including desired system.
How can it be filtered?

Hi,
Create the new segment and message types of the idoc with cutom field.
Then map the new mesage type and corresponding receiver( SM59).

Sending custom field added in Standard table through idoc

Hello Folks,
We have a requirement where custom field of a standard table PA0002 needs to be sent through idoc only to a desired destination system.
My Approach:
I have created a custom segment having custom field from PA0002 & mapped this segment in T777D table.
But the problem with above, is all the system who are receiving PA0002 will be receiving this custom segment also including desired system.
How can it be filtered?

Hi,
In BD64 you can do the segment level filtering. Go to BD64, search for your distribution model there drill down to "filter settings" the make the required segment filtering.
Thanks,
Asit Purbey.

How can I distribute my app only to few set of users through app store?

Hi,
I am developing a app which I want to hand over to a small business. They will be the only one who will be using it. If I submit my app to app store everyone can download which I don't want to do.
Is there a way I can give this app to small business owner without having to submit it to app store? I think if I use the enterprise account and sign the app with enterprise provisioning profile then the owner wont be able to use the app once the profile expries.
Thanks for your help.

See here...
https://developer.apple.com/programs/which-program/

Gmail iPhone app & mailto links, "Mail Link to This Page", etc. / Send-only Mail app account

Is it possible to handle mailto links & the like (e.g., "Mail Link to This Page" option in Safari) with the Gmail iPhone app?
If not, I would like to setup a Mail account for the inbuilt Apple iPhone Mail app, but only use it for outgoing messages. I do not want it to download messages, as the Gmail app will already be doing this. How can I setup the iPhone Mail app as send-only? (specifically for a Gmail account)
Thanks.

Is this issue solved for you yet?
I still have the same problem.
Mail.app changes the configurations on my POP settings from "password" to "apop". Since I don't use "apop" I cannot receive mail. Further, after going through each mail account (about 20 of them) and changing them back to "password" and saving each account setting I attempted to receive mail again to no avail. So, I checked the account configurations again only to discover that mail.app will not save the account settings to "password" and is forcing the "apop" settings.
Michael

How to add a new custom field to one set of employees within one country?

Hi,
I am thinking of a scenario where a new custom field is dispayed in PA30 for IT0006
only for one set of employees in US (such as for a employee group or employee sub group).
Other employees should not have this custom field.
All employees in this scenario is for US country only.
Is this possible? Do we need ABAP for this or only IMG will do?
Any details on how to implement this etc..
Thanks for any help.

Thanks for everyone for the responses.
I really liked the decoupling infotype solution.
However, since some work has been done in the old way, I will try to describe the problem in detail.
Our ABAPer already created a new screen 0200 as a sub-screen in ZP000600 module (I am assuming it is a module pool) using PM01 and assigned to 2010 screen; an alternate screen specified in IMG for country 10 as key (instead of standard screen 2000 for IT0006).
This new screen 0200 is assigned to 2010 in PM01 transaction.
These steps displays the 0200 sub-screen with added fields to all the US employees hiring in the respective personal action.
I want to create a new scenario to suppress these additional fields for some US employees (say company code BKUS)
I placed a new entry in T588M for module pool as ZP000600 , key is 10, alternate screen as 0200 and hide all the fields
But, these additional fields are still displayed always for US employees for whom I want to hide.
Did I miss any thing?
I do not want to hard code in ABAP whom to display and who not to.
Is there a IMG way to do this so that I can change the criteria later as we go.
Thanks

How do I set an email to send at a specific time/date in the future e.g. tomorrow at 9am. I am on an iMACX using apple's version of windows

how do I set an email to send at a specific time/date in the future e.g. tomorrow at 9am. I am on an iMAC using apple's version of windows

apple don't have a version of windows
only microsoft have windows
as how one automatate windows to send mails at a time
googled it for you
http://www.howtogeek.com/125045/how-to-easily-send-emails-from-the-windows-task- scheduler/
more options in the search
https://www.google.dk/search?client=opera&q=automatically+send+email+in+windows& sourceid=opera&ie=UTF-8&oe=UTF-8

How can I set up an email user as "send-only" (no mailbox for receiving)?

Can anyone tell me how I can set up an email account that can send emails but not receive emails.
Our Web application has been using a generic email address "[email protected]" in all of our PHP Web applications as the sending email account. I have this user set up in WORKGROUP ADMIN as a proper account. However the account gets tons of SPAM emails and is constantly filling up.
Also, all of the email accounts require SMTP authentication to send emails.
Is there any way to identify an account as a send only account so we can generate emails from our Web applications that cannot be replied to?
Thanks for the help
-- Jon

Doing so will cause issues. If you send out mail which to an outside server appears to be non existent, mail may be rejected and you may even be blacklisted.
You can remove the account from WGM and add a role account as an alias send to /dev/null. This will look to the outside world like an existing address, but simply be discarded on your system. You should however include a working address in your mailings for people to be able to respond.
Assuming you use local domains, edit /etc/postfix/aliases and add:
noreply: /dev/null
(you can change noreply with the sender used in your PHP apps, but I'd probably change the PHP apps to use noreply as this signals to people receiving your mails that this address is unattended).
When done, issue:
sudo postalias /etc/postfix/aliases
sudo newaliases
sudo postfix reload
HTH,
Alex

HR: Need to Send the Paysilp as a PDF file through Mail to Employees

Dear All ,
       Need to Send the Paysilp as a PDF file through Mail to Employees.
       can anyone please suggest any Standard Function Modules which takes the Payslip Form as input and convert it into PDF and can send it through mail to the concern employees.
      Can anyone please explain the procedure in detail.
Thanks in Advance,
Regards.

venu,
below is code which helps to generate pdf ,,,,hope u know how to use the mail sending function
data:
fm_name TYPE RS38L_FNAM, "Smart Forms: FM Name
sf_name TYPE TDSFNAME
value 'YOUR_FORM_NAME', "Smart Forms: Form Name
P_OUTPUT_OPTIONS TYPE SSFCOMPOP,
P_JOB_OUTPUT_INFO TYPE SSFCRESCL,
P_CONTROL_PARAMETERS TYPE SSFCTRLOP,
P_LANGUAGE TYPE SFLANGU value 'E',
P_E_DEVTYPE TYPE RSPOPTYPE.
data:
P_BIN_FILESIZE TYPE I,
P_BIN_FILE TYPE XSTRING,
P_OTF type table of ITCOO,
P_DOCS type table of DOCS,
P_LINES type table of TLINE,
name type string,
path type string,
fullpath type string,
filter type string,
guiobj type ref to cl_gui_frontend_services,
uact type i,
filename(128).
GET SMARTFORM FUNCTION MODULE NAME ---
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = sf_name
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
I_LANGUAGE = P_LANGUAGE
I_APPLICATION = 'SAPDEFAULT'
IMPORTING
E_DEVTYPE = P_E_DEVTYPE.
P_OUTPUT_OPTIONS-XSFCMODE = 'X'.
P_OUTPUT_OPTIONS-XSF = SPACE.
P_OUTPUT_OPTIONS-XDFCMODE = 'X'.
P_OUTPUT_OPTIONS-XDF = SPACE.
P_OUTPUT_OPTIONS-TDPRINTER = P_E_DEVTYPE.
P_CONTROL_PARAMETERS-NO_DIALOG = 'X'.
P_CONTROL_PARAMETERS-GETOTF = 'X'.
****...................................PRINTING.........................
CALL FUNCTION fm_name
EXPORTING
CONTROL_PARAMETERS = P_CONTROL_PARAMETERS
OUTPUT_OPTIONS = P_OUTPUT_OPTIONS
(....) <--- your form import parameters
IMPORTING
JOB_OUTPUT_INFO = P_JOB_OUTPUT_INFO.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
P_OTF[] = P_JOB_OUTPUT_INFO-OTFDATA.
****...................................CONVERT TO PDF...............
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
BIN_FILESIZE = P_BIN_FILESIZE
TABLES
OTF = P_OTF
DOCTAB_ARCHIVE = P_DOCS
LINES = P_LINES
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
now you can mail the pdf.
Reward points if helpful
Regards,
jinesh

How can I set my Mac to only share SPECIFIC folders with Win7

It used to work, but, even though I have set only my Public folder and a specific photographs folder to share with a Win7 PC on my home network, the Win7 machine can see the entire Mac HD.
I followed instructions from here:
http://www.trickyways.com/2011/07/file-sharing-mac-os-x-lion-and-pc-windows-7/
But if I type Run then enter the ip address of the Mac, all the folders appear. Is there a way to limit them to only the two specific folders?
I've mapped the single folder to a drive, so admittedly, unless you go into "Run", you can't see the other Mac folders and drives, but I'd still like to make sure it can't be done.
Thanks

Welcome to the Apple Community.
Cricket66 wrote:
........ How can I set photo stream to only upload specific images?
That's not possible unfortunately.

HT3349 How do you select a sub-set of cells from the entire document so you can print only those specific cells?

How do you select a sub-set of cells from the entire document so you can print only those specific cells?

There is no analog to MS Excels print range. So the next best thing is to plan your data so that you don't need to use print range. The next best thing after that is to select the range of cells you want to print, then copy, the switch to the application Preview, and create a new document from the clipboard (select the menu item "File > New from Clibboard") then select all, copy then paste to the destination (maybe an email) .
You can also paste that portion of the table into another table (or a new table) by pasting values only

Does Internet Explorer (specifically a version 7 through 9) work on a MAC 10.8.4? I would like to access documents from my work that are only supported on Internet Explorer.

Does Internet Explorer (specifically a version 7 through 9) work on a MAC 10.8.4? I would like to access documents from my work that are only supported on Internet Explorer.

Joni2b wrote:
...I would like to access documents from my work that are only supported on Internet Explorer.
I don't know how successfully this will be but you can turn on the Developer menu (Advanced tab in preferences) in Safari and change the User Agent to trick the documents into thinking you're using IE. You can also do that by adding the User Agent Switcher extension to Firefox.
Otherwise, you need to run Windows in BootCamp, as a Windows Virtual Machine in software such as VMware Fusion, Parallels, or Virtual Box, or the Windows environment of CrossOver Mac, as Niel says.

Problems setting a Yosemite domain name account for Send only

What do I do in Yosemite Mail so that my DOT MAC account is IMAP, but so that I can also send email from a domain account that is a POP account at GoDaddy?
My Dot Mac / iCloud account is my primary Mail account. I also have a domain name account that I use only for sending mail. The domain name account is a POP account, not an IMAP account. The domain server (not an Apple server) forwards the email to my Dot Mac account as it comes in, but I do NOT sync mail or even pick up mail from the domain name server.
With Yosemite, Apple apparently changed the way it deals with that situation. I say "apparently" because I'm having a hard time getting help on this. Before Yosemite, I had the domain account enabled, but while there was a password for sending there was no password for picking up the domain name mail. Every once in the while over the years that setup would get flaky (as Apple made changes on its end?) but usually it worked.
I continued that setup with Yosemite, but a few months ago I started having problems. My mail worked as normally, but during the night or the morning, many messages would arrive as unread duplicates, and many emails I didn't want deleted were permanently deleted. Oddly, in addition, I had an easy time keeping the setup on my MacAir but I had a hard time keeping it on my Mac Mini, even though both have Yosemite.
I took my MacAir to an Apple genius who said the settings had changed in Yosemite. He somehow reset the account for Send Only by clicking a box. Everything worked fine for a week or so,* But then I could no longer send domain name mail, I couldn't find the setting, and I went to another Genius, who didn't know what I was talking about and who couldn't solve the problem.
I need to be able to send my domain name account without making it an IMAP account, but can't figure out how.
thanks
* In other words, the Dot Mac IMAP worked correctly, the POP messages forwarded correctly to DOT MAC (without any duplication problems), and I was able to send mail from the domain account.

I've not tested it but if you simply leave the incoming mail server field in the Mail account preferences blank for that account blank but set up the outgoing server and do not check "include when automatically checking new mail" you should be able to send but not receive
OR undo the forward that you have set up from #2 to #1 and use both normally
LN

What setting need in SAP R/3 if i want to send only changed records to XI

Hi All
     I had problem while sending Idoc from SAP R/3 to XI
     Thing is i want to send only the changed records in Idoc not all so what
     settings i need to in SAP R/3 ?
     Can any one explain me how to do this...
Adv thanks and Points
Prasad K

Hello Prasad,
Many cases you will find that there are standard message types for change idocs.
For Instance let us take Purchase order:
--For Order create ORDERS is the message type.
--For Order Change ORDCHG is the message type.
You will just need to maintain both in the outbound parameter in the Partner Profile in we20.
From XI side this means there are separate interfaces -- ORDERS.ORDERS02 & ORDCHG.ORDERS02 for instance. You just need to treat this as different interfaces and Configure. One last thing . If the basic type is same eg. ORDERS02 then you can use the same message mapping program for both Change and create if you want -- although the interface mapping will be different.
Make sure to maintain metadata in IDX2 in XI.
Cheers,
Himadri

Delimiting HR assignments through PPSM for a set of employees

Dear All,
Can any one guide me how to delimit the set of employees assigned for a WBS.
Thanks in advance
Regards
Karunakaran

closing the issue

Sending only a specific set of employees through idocs

Similar Messages

Maybe you are looking for