Sending pictures to email via messages produces an error message

I fairly certain that I've done this before, but I'm trying to forward pictures from messages to my email. Everytime I try I get an error message saying that the recipient has chosen not to receive messages from a 900-0 number on sprint. Has anyone else had this error or is it not possible to send pictures to an email address this way. Again, I'm pretty sure I've done this in the past.
Any help is appreciated.

http://www.kirupa.com/developer/actionscript/flash_php_email.htm
hth,
blemmo

Similar Messages

I can not send or receive email on my Iphone 5S, error message. Been like this for 3 days.

I can not receive or send email from my Iphone. Microsoft had server issues, says it is fixed but still can not send or receive emails. Anyone else having this problem?

The outrage is still ongoing, in the mean timeyou can use your browser to check your e-mail.

Changing sender on sent email via SAP

I need to change the sender on sent email via sap; i mean, no sy-uname, something like [email protected]
Regards

Check the sample code
*& Report ZASD
REPORT ZASD.
This example shows how to send
- a simple text provided in an internal table of text lines
- and an attached MS word document provided in internal table
- to some internet email address.
All activities done via facade CL_BCS!
DATA: send_request       TYPE REF TO cl_bcs.
DATA: text               TYPE bcsy_text.
data: binary_content     type solix_tab.
DATA: document           TYPE REF TO cl_document_bcs.
DATA: sender             TYPE REF TO cl_sapuser_bcs.
DATA: recipient          TYPE REF TO if_recipient_bcs.
DATA: bcs_exception      type ref to cx_bcs.
data: sent_to_all        type os_boolean.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = 'c:\wagonTrain.gif'
   FILETYPE                      = 'BIN'
HAS_FIELD_SEPARATOR           = ' '
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            = VIRUS_SCAN_PROFILE
IMPORTING
FILELENGTH                    = FILELENGTH
HEADER                        = HEADER
TABLES
    data_tab                      = binary_content
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
    PERFORM main.
      FORM main                                                     *
FORM main.
try.
    -------- create persistent send request ------------------------
      send_request = cl_bcs=>create_persistent( ).
    -------- create and set document with attachment ---------------
    create document from internal table with text
      APPEND 'Hello world!' TO text.
      document = cl_document_bcs=>create_document(
                      i_type    = 'RAW'
                      i_text    = text
                      i_length = '12'
                      i_subject = 'test created by BCS_EXAMPLE_2' ).
    add attachment to document
    BCS expects document content here e.g. from document upload
    binary_content = ...
      CALL METHOD document->add_attachment
        EXPORTING i_attachment_type = 'GIF'
                   i_attachment_subject = 'My attachment'
                   i_att_content_hex    = binary_content.
    add document to send request
      CALL METHOD send_request->set_document( document ).
<b>*     -
set sender -
    note: this is necessary only if you want to set the sender
          different from actual user (SY-UNAME). Otherwise sender is
          set automatically with actual user.
      sender = cl_sapuser_bcs=>create( sy-uname ).
      CALL METHOD send_request->set_sender
        EXPORTING i_sender = sender.</b>
    --------- add recipient (e-mail address) -----------------------
    create recipient - please replace e-mail address !!!
      recipient = cl_cam_address_bcs=>create_internet_address(
                                    'YOUR [email protected]' ).
    add recipient with its respective attributes to send request
      CALL METHOD send_request->add_recipient
        EXPORTING
          i_recipient = recipient
          i_express    = 'X'.
CALL METHOD send_request->set_send_immediately( 'X' ).
    ---------- send document ---------------------------------------
      CALL METHOD send_request->send(
        exporting
          i_with_error_screen = 'X'
        receiving
          result              = sent_to_all ).
      if sent_to_all = 'X'.
        write text-003.
      endif.
      COMMIT WORK.
*                     exception handling
* replace this very rudimentary exception handling
* with your own one !!!
catch cx_bcs into bcs_exception.
    write: 'Fehler aufgetreten.'(001).
    write: 'Fehlertyp:'(002), bcs_exception->error_type.
    exit.
endtry.
ENDFORM.
*Check the BOL Part
Message was edited by: Amandeep Singh

While send/receive email, I have received an error message "Sending of password d"? However with same login details, I am able to login with other application.

While send/receive email, I have received an error message "Sending of password d"?
However with same login details, I am able to login with other application.
I have changed password still the issue remains as it is.

https://support.mozilla.org/en-US/kb/cannot-send-messages

How can I send pictures or email from my desktop to a cell phone?

How can I send pictures or email from my desktop to a cell phone?
I use Gmail for my emails.

By sharing playlists you mean sending the list of song titles along with the songs themselves you can't. That would violate Apple's contracts with the studios regarding sharing music, videos, books, etc. Which is strictly forbidden. With the single exception that I am aware of which is Home Sharing.
If you just want to share the list of song titles you could take a screen shot and email that. Hold down the home button and press and release the power button. The image is then stored in your camera roll.

Just got an Iphone - Receives email but can't send email to anyone ( POP ). Error Message : "The recepient ... was rejected by the server because it does not allow relaying."

Just got an Iphone - Receives email but can't send email to anyone ( POP ). Error Message : "The recepient ... was rejected by the server because it does not allow relaying." Please help............

Hi johnnytoo!
I know it's aggravating when you need to send an email and it doesn't go through! I have a link that provides step by step information from Apple's website that should resolve this for you.
http://support.apple.com/kb/TS3899
Please post back with your results, and have a good day!
Christina B
VZW Support
Follow us on Twitter @VZWSupport

How to configure canon ir 2250 to send scans to emails via exchange server 2010

Hello
I have one question:
How to configure canon ir 2250 to send scans to emails via exchange server 2010?

Hi,
Based on my research, the member limit of a distribution list depends on the scalability and performance of your environment:
http://blogs.technet.com/b/exchange/archive/2009/02/19/3407003.aspx
Thanks,
Angela Shi
TechNet Community Support

I just downloaded Photos and I have lost the ability to easily send photos by email via Outlook. Any suggestions?

I just downloaded Photos and I have lost the ability to easily send photos by email via Outlook. Any suggestions?

If you use Mac Mail and Microsoft Outlook mail like I do, you could switch from one to the other mail program for send photos.
iPhoto >> Preferences >> General tab >> E-mail foto's via >> select Microsoft Outlook.
Click a photo in iPhoto >> Share >> select E-mail … >> Microsoft Outlook will be launch.

EPrint - sending email from my company email to ePrint - still getting error messages

Hi
i just bought a new Officejet AiO 4620 and installed it. Works fine. I also registered it on ePrint. I requested at ePrint that the ePrint will only work for choosed pre-approved emails. Most of them are private ones and work. However I also registered my business email of my employer and if I send emails from my business email, even registered on ePrint, error messages come up. Any idea what the issue can be and how I can resolve it? I would like to prevent to open ePrint for ANYONE, I would prefer the option preapproved emails only. Thx for any guidance. Chris

Hi,
Please try the following method:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Eprint-rejects-email...
The following method may not suitable for you:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Eprint-jobs-are-reje...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I can't upload Iphone 5 video or send it in an email. It will play in iTunes but just gives a black screen when I try o email. I get an error message when I try to upload. Any Ideas?? I've already reinstalled OS X

It will play in iTunes but just gives a black screen when I try o email. I get an error message when I try to upload. Any Ideas?? I've already reinstalled OS X

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
Problem Event Name:             APPCRASH
Application Name:                  iTunes.exe
Application Version:               10.4.0.80
Application Timestamp:          4e262cfr
Fault Module Name:               QuickTime.qts
Fault Module Version:             7.70.80.34
Exception Code:                     c0000005
Exception Offset:                    00146b30
OS Version                                                            1033
Locale ID:
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information4:          0a9e372d3b4ad19135b953a78882e789
Any assistance I can get will be greatly appreciated.

Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142

Good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiti

good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiting

Disable ALL security software (firewall, antivirus/spyware, etc.) running on your PC while updating.

HT201210 iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly

iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly". I also tried to downloadiTunes 11.1.4 at th Apple website and that did not work either-It stalled with an erro message that stated the "mobile service" would not open HELP!

Hi Doug! I was having the same problem but after reading a lot of answers I found the solution. First of all you need unistall ALL THE SOFTWARE OF APPLE from your computer, I mean BONJOUR, QUICKTIME, ITUNES, APPLE SOFTWARE UPDATE, APPLE MOBILE DEVICE SUPPORT and the other one that is from compatibility with apps of apple, after that you must verify if this folders are removed if they don't then remove it:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple\
C:\Program Files\iTunes\
C:\Program Files\iPod\
If you have a 64-bit version of Windows, you'll need to confirm that the following folders have been removed:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple\
C:\Program Files (x86)\iTunes\
C:\Program Files (x86)\iPod\
Then if you have ccleaner you can use it to clean all registers left, then reboot and try to install iTunes 11.1.4 again as administrator... That works for me, I hope that helps you too...

I am using Firefox ver. 3.0.19 and I have Windows 7. When I use Firefox as a browser I cannot print my emails. I get an error message: "pcfax not availabe". If I use IE I have no problem printing the emails.

I am using Firefox ver. 3.0.19 and I have Windows 7 which came with a new computer. When I use Firefox as a browser I cannot print my emails. I get an error message: "pcfax not availabe". If I use IE I have no problem printing the emails.
== This happened ==
Every time Firefox opened
== From day 1 with the new computer about two weeks ago.

It sounds like you have the wrong printer selected.
When you get the Print window, pick another printer from your printer dropdown. You seem to have a fax printer selected instead of a physical printer.

When checking email I now get an error message saying User name or password is incorrect...

When checking email I now get an error message saying User name or password is incorrect... Went to AT&T store and they didn't have a clue how to fix it...
I'm sure this question has been asked, but can someone point me in the right direction?

I am also having the same problem and I did go on my computer and change the password and my iPad still gives error message. Yes wish someone could help.

Sending pictures to email via messages produces an error message

Similar Messages

Maybe you are looking for