Sending Project as an idoc pls help!!

Hi ,
I am working on Project Systems Module . Can anyone please tell me how to send a project from one R/3 SAP system to another ? Is there any standard program to send an project as an idoc ?? What is the procedure to send the project to antoher system.
Thank you

Hi Alisha,
Instead of using idoc use BAPI_PROJECT_MAINTAIN.
However if u really wanna use Idoc then there is a message type called <b>project </b>however in the distribution model you will have to add bapi, object type and method.
This message type only helps you to transfer project data
like project definition and wbs elements ,in order to transfer the entire master data you will have to either create a custom Idoc or enhance the existing one.
Hope this helps you.
Thanks & Regards,
Vanita

Similar Messages

Sending a zproject idoc pls help

Dear friends,
I have gone ahead and extended my project01 idoc to zproject01 to accomdate custom zfields . I would like to know which BAPI or User Exit can be used to populate these zfields in the zproject01 .
Point will be awarded generously .
Please do let me know .
Thank you

Is zproject01 an idoc type or anything else? If it is an idoc type, you have to add custom zfields in the custom segments.
For that, you have to create custom zsegments. Once this is done, go to function module based on your order type which is in the format 'IDOC_INPUT_<Mess Type>' for Inbound and 'IDOC_OUTPUT_<Mess Type>' for Outbound. In this FM, there are some customer function exists. You need to populate these zfields in this customer exit for segments.
If your requirement is not this, clear me.
Thanks,
Vinod

Problem in sending email text through BTE2040-pls help

Hello,
Does anyone know how to give an email body to the Payment Advice sent as an email through BTE 2040? We use the standard program RFFOAVIS_FPAYM. While debugging I figured out that the standard program just sends the payment advice as PDF attachment without the email body. Any suggestions please? its very urgent.
Thanks.

HI SPauli ,
If you want to add email with bodytext, you need to implement sap note1033893.
For SAP_APPL Release 4.6C and 4.7
For SAP_APPL Release 5.00 and higher
depend on which release you are working in, u need to implement as accordingly.
I try and it works.
let me know if u had more questions.

TS2755 Me and my wife r sharing the same Apple ID, with the conversion IOS7 all of a sudden my wife can read all my sended and received iMessages! What t.f is going on? I tried all kind of things, pls help

Gentlemen,
Me and my wife r sharing the same Apple ID, with the conversion to IOS7 all of the sended and received iMessages on my phone comes in also on my wife's phone! Tried all kind of things, pls help
Marco

Are you both using the same Apple ID?
What do you have here:
Settings > Phone > My Number > ?

Final Year Project, pls help me! _

Does anyone knows how to open the serial port in Palm for read/write?
I have tried many times but always fail.
Pls help! Urgent!

Thank you very much!
I found the KVM.prc, KVMutil.prc and the cldc API.
Then I try to code a program like this:
import java.io.*;
import javax.microedition.io.*;
import com.sun.kjava.*;
class CommTest extends Spotlet
     OutputConnection oc=null;
     OutputStream dataOut=null;
     String strURL="comm:0";
public static void main(String[] args){
(new CommTest()).register(NO_EVENT_OPTIONS);
public CommTest(){
try{
          oc=(OutputConnection)Connector.open(strURL);
          oc.close();
     catch (Exception e){
               System.err.println("Send data exception " + e);
I tried to run this program, however, I got this:
Send data exception javax.microedtion.io.ConnectionNotFoundException:
The required protocol does not exist comm:0
How can I solve this problem?

All my send out email lost in cyberspace! Pls Help!

Hi pp,
Pls help me! I believe my Mail started to behave strangely when I update the latest security patch or OSX to 10.4.5 ... am using Mail 2.0.7 now...
Everything look and work fine for my mail server... I can download all email that people send to me, and it's seems like I can send out email to my friends too...
**** No! Mail seems to work fine when I try sending out email. No error msg, no blockage... everything looks just alright. But my friends have complained to me that they didnt received a single email from me...
1.feeling something wrong, I called up my Mail server hosting company to check my mail and they say nothing is wrong.
2. I do a roundtrip testing, by sending email from my own account to my own account. I send out about 10 over mail... nothing was received.
3. I do a disk verification using Disk Utility. No error detected.
4. Decided to download a third-party email client program to test, IT'S WORK!
I can use other email client program to send out and able to receive!
Conclusion is, if I use Mail to send out my email, it will send out but eventually disappear before reaching the recipient. Something must be wrong with my System or Mail... but I've run out of idea on how to solve it...am getting very desperate at the current situation... hopefully there are some genius or knowledgable kind soul fellow that can help me on this mystery error... hereby, thanks alot fto anyone who offer their help to me. greatly appreciated.
Powerbook G4 12" Mac OS X (10.4.5)

Nothing in any update should have caused this, and clearly has not for most people -- therefore we should seek an answer aside from waiting for some unknown update.
What type of account do you have -- POP, IMAP or .mac. In Mail Preferences, what are the selections in Mailbox Behaviors for this account?
In the Finder, open Home/Library/Mail/Mailboxes -- is there an Outbox.mbox folder, and is it represented by a blue Icon? At Home/Library/Mail/this account folder, are there both a Drafts.mbox folder, and Sent Messages.mbox folder, and are both blue icons?
More info, please.
Ernie

I want to change my password but the system is not sending me message to reset my password. pls help someone is using my password without my permission and i want to change my password.

i want to change my password but the system is not sending me message to reset my password. pls help someone is using my password without my permission and i want to change my password.

If you are talking about your Apple ID password, make sure it IS your apple ID.
In the past 24 hours, I have received two emails "How to reset your Apple ID password". I had not requested any change and I finally realized someone else is trying to reset the password. I have had this Apple ID since 2009 so I am not using someone else's ID.
Again, if you are not receiving the email to reset make sure you have the right ID - it might be going to the email linked to the account, and it might not be yours.

Forgot your answers? Send reset security info email ..... this link not see in my apple accound pls help

Forgot your answers? Send reset security info email. this link not see in my apple accound pls help i am used another id is alredy located

The send reset link will only show on your account if you already have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you haven't checked whether you have the link then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side of the screen (similar to the screenshot in the second post on this thread) you might see an option below the questions to send reset info to a rescue email address.
If you don't get the link (you won't be able to add a rescue email address until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get the questions reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570

On 15/12/2012 i send iphone 4s adapter to digi klang for Warranty. until today digi center still talk to me go back home and waiting.pls help Thank.

on 15/12/2012 i send iphone 4s adapter to digi klang for Warranty. until today digi center still talk to me go back home and waiting.pls help
Thank.

This is a USER to User technical Forum
There is no Apple presence on this forum
So nothing anyone here can do
As this is a public World wide Public forum I suggest you remove the document you have strangely decided to copy above .It looks like some form ID card

I cant send MMS using my iphone 5s . it keep on prompt me a msg "MMS Messaging needs to be enabled to send this message", but inside "setting/message" there's no button for me to ON the SMS/MMS. pls help. Thks

I cant send MMS using my iphone 5s . it keep on prompt me a msg "MMS Messaging needs to be enabled to send this message", but inside "setting/message" there's no button for me to ON the SMS/MMS. pls help. Thks

@Dmitriy Buldakov, have you found the solution to the issue yet? I have the same problem, no option to turn on MMS in my iPhone settings. I checked the settings on my friend's iPhone, which has the same iOS version as me (8.1.1), and the option is there. It's really annoying...

I updated GarageBand on ipad2 tonight and I lost my project. Pls help.

I have no idea .. At first, after updated I lost only one project file. Then I deleted it and reinstall. Now, I lost all of my project.. TT
Btw, Im using ipad2 os5
Pls help, they re really important for me
Thank you so much

@Blueberry - Except when Apple says delete an app that isn't updating correctly... I'd rather be angry and a poorly implemented cloud backup solution. If you don't have anything useful to provide - don't.
KnotVarut, I'm in the same boat as you. I've lost months of work and I see no way to restore from a backup because, guess what, my latest backup occcured "automatically" last night and there is no (apparent) history of previous backups.

Pls help me to make a JNI project

Hello all,
Please any one tell me How to make a project using JNI. If any one having any small project regarding JNI concept ,pls forward me.
and PLs help me how to run the jni project.
Thanx
julu

I write numerical application in java and I use one C++ library. I need just one function from that library, so I made my own JNI interface to that function and everything works fine (not everything, I have problems when allocating more memory in C++ code, see my own forum message in JNI forum...)
What is your problem? If you need working tutorial and the one I linked is not satisfactory, you may try googling for another one. I have Bruce Eckel's Thinking in Java and that was my start...
With regards,
Miro

Pls help in sending multiple resposes after analysing the sequential commands from the device

Hi all
pls help me in sending sequential responses for the different commands. For example,i have to send the response1 for command1 then again host wll send the some other command ,say command 2 after receiving response 1,then again i have to respond to the corresponding command.i m using the pci-6221 card not tradition DAQcard.
regards,
nitin

Hello nitin,
It sounds like you are looking for some examples on how to program your
6221 DAQ board. I highly reccomend taking a look at the LabVIEW
shipping examples that install with the DAQ driver. To access
them, open the NI Example Finder by going to the menu bar of a VI and
selecting Help >> Find Examples...
If you have any specific questions, please feel free to ask!
Eric
DE For Life!

Pls help me in sending sequential responses for the different commands.

Hi all
pls help me in sending sequential responses for the different commands. For example,i have to send the response1 for command1 then again host wll send the some other command ,say command 2 after receiving response 1,then again i have to respond to the corresponding command.i m using the pci-6221 card not tradition DAQcard.
regards,
nitin

Hi,
you need to be more specific. What is your setup?
Obviously, what you need is a command parser. Look this article for the basics. I know it is meant for RT but the concept is there.
Not sure it will help with so few infos: http://zone.ni.com/devzone/conceptd.nsf/webmain/CD63FD0F746B17A686256F090065F572
Dai
Dai
LV 7.1 - WIN XP - RT - FP

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, just one big clip,,,pls help, i need to make some changes to the project..thanx

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, text's, effects, etc..... just one big clip,,,pls help, i need to make some changes to the project..thanx

Hi Stephen, thanx...
Yes, we are talking about FCP X...this is the thing:
I worked on a project a few days ago and went to share - export movie.
Today, i opened the FCP again, to make some changes, and when i enter to the project, it shows me as one big clip.....i dont see it says compound clip....and i tried anyways pressing break appart clips...but nothing....could it be that i made it compound before exporting it..? if so how can i recover the un-compound version >?
I tried to import the saved .mov file, but it opens the same....as one long clip...
Pls help...thanx.

Sending Project as an idoc pls help!!

Similar Messages

Maybe you are looking for