Sensitive Data Breach; FF displays content from a previously loaded plugin when displaying new content from within another pugin

Sensitive Data Breach.
When loading content from a plugin, such a pdf or flash, any content from previously viewed content from a plugin is flash before the new content is displayed.
In our app we show sensitive information and this represents a data breach.
This issue present across or between the same or different plugins. Silverlight - > PDF, PDF -> PDF, etc.

In reviewing the steps to re-create the problem, I'm not sure I understand what's happening.
 1. Load some flash content
2. Leave the Tab open or Close the tab
3. Load a pdf within the browser in another tab.
 Note: Ensure Options -> Tabs -> "When I open a link in a new tab, switch to it immediately" is selected.
 Note: Ensure you clear your cache so plugin content is downloaded.
 The longer it takes to download the pdf the longer the sensitive data will be displayed. When the plugin fails content may be displayed indefinitely.
(I view PDFs outside the browser, so I haven't attempted to re-create the above scenario.)
Are you saying that Flash content appears where the PDF is supposed to load, or a previous PDF appears?
I assume this previously viewed data doesn't survive a shut-down and restart of Firefox. Is that correct?

Similar Messages

HT1766 After I backed up my new iPhone with content from my old iPhone, all of my new content was deleted. How do I retrieve it?

After backing up my new iPhone with content from my old iPhone, all of my new content (photos, voice memos, etc) was deleted. How do I retreive this?

If you just bought the iPhone today, the first time you connect a new iPhone or iOS device to iTunes the first time that is used to sync with another iOS device, you are prompted to transfer the backup for the other iOS device to the new iOS device, or set up the new device as a new device.
Sounds like you did the former and if so, this did not include backing up the new iPhone first. All data on the iPhone was replaced with the backup for the iPod Touch. The data that was on the iPhone at that time is gone.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting, but the password from the old computer in when waking the computer from sleep.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting the new computer, but the password from the old computer in when waking the computer from sleep. I want to use my iCloud password on both computers consistently. How can I fix this?

The only other place to change a password for the computer login is in Users & Groups preferences. But I don't really know enough here to fix your problem. You can try fixing the keychain:
iCloud- Frequently asked questions about iCloud Keychain
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

Restore new iPad Mini from iPad 1 backup. Ican update new apps from Apple store but most of my apps have been showing the Waiting status for over 12 hours. Store shows them as installed. What gives?

Restore new iPad Mini from iPad 1 backup. Ican update new apps from Apple store but most of my apps have been showing the Waiting status for over 12 hours. Store shows them as installed. What gives?

If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

Copy your ENTIRE iTunes FOLDER to an External Drive...
Full Details Here > http://support.apple.com/kb/HT1751
To Operate iTunes from the External Drive...
Start iTunes with the Option key held down and guide it to the new location of the library.
Be Sure the drive is Formatted Mac OS Extended (journaled)
Also... have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

How do I stop my imac OSX from automatically opening itunes 10 when a new device is attached via USB.

How do I stop my imac OSX from automatically opening itunes 10 when a new device is attached via USB? The devices do not pop up in itunes under a sync category, so I can't turn them off one by one, nor would I want to.
I apologize if this has been answered, but I couldn't find the solution for this problem.

Thanks for the reply but it didn't solve the problem unfortunately and I didn't think it would as I only downloaded Firefox for the first time a few days ago even though I have had this problem for over six months using IE.
Anything else that you think is worth a shot?

Missing contact when "create new contact" from email or number

I am having a really strange problem on my iPhone and think it will be a fun mystery to solve. Please help me!
It is currently set up with google so that my mail/notes are using gmail IMAP and my contacts/calendars are using Google Sync. So far it's been working pretty well except for all the known many bugs and issues (please fix these, google!). I have no other email, calendar, or contact accounts set up (not even syncing with my computer).
I received an email from a friend who I did not yet have a contact for, so in the email header I clicked her name and chose to "Create new contact." As usual, the email address was already in the "email" field, so I just edited her name and filled out the "company" field and pressed Done. The "from" field in the email updated to show that the contact had been added to my phone and that it recognized the email as being from her.
Now, I go to add a number to her contact and when I navigate through my contacts list, her name is no where to be seen. I've tried searching through the contacts by using the search bar at the top of both the Phone and the Contacts apps, but nothing shows up. However, when I compose an email and start typing her address, it recognizes her as a contact. Even weirder, I just tried the entire phone search spotlight feature, and it found her contact right away, as if it were any normal contact. When I click on it, it brings me to her contact page, which I cannot edit, and when I press the little left arrow "Contacts" in the top left of the screen to go back to the whole listing, she's not there!
When I go to add contacts using the little + symbol in the top right of the phone app, it works normally and the contact appears as usual. But every time I try to do a new contact from email, this happens! Choosing to "update existing contact" works fine, though. So I've been forced to create an empty contact with her name in the Phone app, and then add the email to it.
Please help my find where in my phone this contact is residing, and how to bring it out so I can find it. I have tried force-quitting the relevant apps from the multi-task dock, and even turning off and on my phone, but to no luck.
Update: Just tried creating a new contact from a phone number I've previously dialed and the same thing happens! Where are my contacts going?? This is so weird!
Not sure if this is just a google sync issue, but I figured I'd post it in case other people are having similar issues
Device: Apple iPhone 4
Carrier: AT&T
Country / Language: USA English
OS: iOS 4

I recently experienced a similar event. I was adding from Contacts "+" button on the iPhone 4. I completed entering the data & hit "done". I went back to add a photo. I hit "done" & went to test the result. No new contact. Search did not find it. Tried two more times with different contacts. Same result.
At one point, the "All Contacts" directory went blank. Nothing. Seconds later the contacts returned. Scary. I rebooted the iPhone. No new contacts but old ones fine.
I then entered with an old iPhone on OS 3.2 same data. Showed quickly via MobileMe. On the new iPhone added photo the photo. All OK. From an iPad, OS3 I did the same. Added photo in new phone. All OK. I added from the new iPhone including photo. All OK.
The iPhone IOS4 reboot may be the answer. Wish I had tried older systems before reboot.

Jpeg Displays pick up Raw file sxif info when displayed

After creating a jpeg images as the last part of a raw -> psd workflow I noticed that the jpegs were not displaying correctly in CS5's bridge.
This can be corrected by opening the jpeg in RAW, setting everything to 0, and clicking on DONE. This erases the info about how I processed the CR2 file - but is a REAL drag.
Am I missing some setting somewhere to fix this oddity?

By the way I spelled Exif wrong.
What I mean is that, if e.g. I increase an image's exposure by 1 stop in raw, process the image, then the final jpeg is displayed overexposed by 1 stop.
It displays correctly (i.e. like the psd file it was created from) if, as I say, I reload the Jpg and UNDO the saved info (that the file was processed with a +1 exposure in raw).
Thanks for your interest.

Every time i try and update firefox a window pops up ad says that I must reboot firefox from a previous install and when i do and i try to reinstall firefox the same pop up comes up and it won't let me update to the new version

when i try to update firefox to the new version and i go to install it it tells me to reboot the system from a previous install of firefox so i go and reboot the system and it keeps saying the same thing.

Try this: 
# Close Firefox.
# In Windows Explorer, go to the following location: '''%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates'''
# Delete everything in that folder.

How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
Thanks for any suggestion

When I atempt to send a web site via an email from FF, the system keeps opening one new mozalla screen after another. Nothing will stop this but logging off. I have to bookmark everything and then put it in an email. Your help is appreciated.

If I attempt to send a link to someone from a site I am visiting, ff starts opening one new start window after another. So fast i can't get it stopped. Even going into taskmaster which I sometimes have to try 3 or 4 times, it is impossible to get them all stopped they just keep multiplying. Only logging off or a restart will fix the problem.
The same think happens if I use a "send picture to". I don't know what else to do. I have run all the diagnostics I have. Checked all the drives, etc. Check all the ff settings. Nothing shows.

http://support.mozilla.com/en-US/kb/Managing+file+types
Don't set Firefox for '''mailto'''. 
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

BUG: Advanced Actions duplicated when creating NEW PROJECTS FROM TEMPLATE using Adobe Captivate 8.

Need: CREATE NEW PROJECTS FROM TEMPLATE using Adobe Captivate 8.
Problem: NEW PROJECT (.cptx) duplicates the Advanced Actions originally configured within TEMPLATE FILE (.cpt.).
For example: Template file (.cptl) advanced action "_initializeModule" gets duplicated as "_initializeModule1", "_initializeModule2", "_initializeModule3" within NEW PROJECT. FYI, the original "_initializeModule" advanced action still appears.
MAJOR BUG, what the heck is going on?!?!!! Planning to deploy this template file to use for multiple courses with multiple users, this WILL cause epic confusion across the board.

Similar problem, think they are working on it as well: when dragging a shared action from an external library to a slide or object event, and that action is using a parameter that was already created for another shared action, there will be a new parameter created which really screws up the shared action contrary to this problem. Tip: for the moment do not drag shared actions from an external library immediately to an event, but drag them first to the Library: Reuse Shared Actions in other Projects - Captivate 7 vs. 8 - Captivate blog

WLS Instances don`t refresh when getting New content

 Hi there,
 We´re using wls6.0sp2 for testing purposes and we have problems when we're loading
 new HTML and JSP content in a already deployed web directory, i.e. a client is
 only able to access the old stuff.
 The Clients are communicating via an Apache PlugIn with the WLS Instances (we`ve
 got a small cluster with 2 instances). Is it possible that either the apache webserver
 or the WLS Admin Server have cached the old content ?
 Is hot Deploymewnt of new content not possible on WLS 6.0 ?
 Thanks for any help.
 sincerely,
 Marcus Kreher


WebAppComponents can be hot deployed, i.e. refreshed without having to
 redeploy the whole application. This will work for any static content (html,
 gif, jpeg, etc.) as well as jsp files.
 In 6.1, use the weblogic.deploy command to refresh. In 6.0, there is a
 separate command-line tool
 (weblogic.management.tools.WebAppComponentRefreshTool) which is in a rolling
 patch for Service Pack 2.
 Please contact WebLogic Support to request the Rolling Patch.
 Regards,
 -- Ian
 "Marcus Kreher" <[email protected]> wrote in message
 news:[email protected]..
 >
 > Hi there,
 >
 > We´re using wls6.0sp2 for testing purposes and we have problems when we're
 loading
 > new HTML and JSP content in a already deployed web directory, i.e. a
 client is
 > only able to access the old stuff.
 > The Clients are communicating via an Apache PlugIn with the WLS Instances
 (we`ve
 > got a small cluster with 2 instances). Is it possible that either the
 apache webserver
 > or the WLS Admin Server have cached the old content ?
 > Is hot Deploymewnt of new content not possible on WLS 6.0 ?
 >
 > Thanks for any help.
 >
 > sincerely,
 > Marcus Kreher
 >

Keep receiving 3333 when acquiring new license from license server

Hi all
I find error 3333 will always be dispatched by DRMManager if I acquire a new license from the license server. I'd appreciate if anyone could help explain and show me how to fix or get around the issue. Here is the detail:
User rents a title.
When he plays it for the first time, the license server issues a voucher will 24-hours playback window set.
Client starts the playback, the playback window starts count-down.
After 24 hours, the voucher gets expired.
User rents the same title again and he goes to play it again on the same computer.
Client tries to load the local voucher and finds it is expired.
Client tries to re-load the voucher from the license server again.
The license server issues a new voucher for the same title with the same parameters set (see below).
DRMManager dispatches 3333.
3333 will be dispatched again if goes to #7 again.
If I remove all local vouchers by using DRMManager.removeDRMVouchers(), the playback would start after re-acqiure the voucher from license server.
The document metions to "re-acquire the voucher from server if 3333 is received". But it seems not working in my case.
BTW, here is how we set the parameters when license server issues a voucher for a new rental title (never played before):
license caching during: 24hour
playback window: 48hour
Thanks.

Hi Hirosh
Thanks for your help. It's good to know there is a way to hanle this case (even in the license server side).
The document metions "re-acquire the voucher from server if 3333 is received" is the Flash Runtime Error document. But after double check, I find the suggestion is for error 3332. It's my mistake and I'm sorry.
Do you know where I can get the support for implementing "issuing new voucher for re-renting same video"? If it's not in the reference implementation where I can find it.
Thanks.

Is it possible to transfer data from a dead macbook pro to a new user account on another macbook pro?

I have killed my 2 months old mbp (water). I have an older mbp (2 years old) that I wish to transfer all data from my dead mbp to. I was hoping that I simply could create a new user on my old mbp and transfer all data to this account using the migration assistant and thereby re-create my dead mbp. Especially I wish to acces my contacts, mail settings and calendar, but would of course prefer to acces all files. I have a thing (do not know the right term) that can read the HD on the dead computer. It is now connected to my mbp, and I can acces data, but the migration assistant do not recognize it. Can someone please help me?
Thanks...

It's possible that the water caused your hard drive directory to be corrupted when the logic board shorted out. You may want to try repairing the now-external drive with Disk Utility's Repair Disk routine. If it reports making any repairs, run it repeatedly until it reports that the disk "appears OK". Then try Migration Assistant again.
If that fails, then perhaps the disk itself was damaged by the spill. You could go one step farther and try using data recovery software on the drive:
http://www.prosofteng.com/products/data_rescue.php
http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
http://download.cnet.com/VirtualLab-Data-Recovery/3000-2094_4-10298807.html
All three recovery utilities come in demo versions that will show you what the full version could recover before you have to pay for anything.
Good luck.

Sensitive Data Breach; FF displays content from a previously loaded plugin when displaying new content from within another pugin

Similar Messages

Maybe you are looking for