Sensor Error during Apple Service Diagnostics

I've been having problems with my early 2009 mac pro freezing and having to hard reboot.  I ran Apple Service Diagnostics and the test fails during Sensor tests:
Temp (TNOD) - (MacPro) IOH or (iMac or mac mini) MCP, Tdiode (test 1) - Sensor Reads Within Operating Range
- Check to ensure that sensor reads within operating range.
ERROR - Sensor is reading above the high limit
- TEST FAILED -
Does this mean I need to replace the logic board?

Putting in the new logic board solved my issue, but I assume if I just fixed the loose sensore it would have fixed it for a lot less.
I attached a pic for you pointing it out on the processor board.

Similar Messages

  • Error during mapping service, RFC-XI-File Adapter

    Hello,
      I have the following problem: I am using RFC to send some data to XI and then to File Adapter, however I get a short dump with "5990 Error during mapping service in XI". Even though mappings works, I tested using the document that comes in XI in Repository without any errors.
           What does this error means and is there any way to get more detailed explanation of my error. Thank you in advance for your help,
                   Dmitriy Mindich

    Synchronous RFC
    1. CALL FUNCTION func DESTINATION dest
                         parameter_list.
    Asynchronous RFC
    2. CALL FUNCTION func STARTING NEW TASK task
                    [DESTINATION {dest|{IN GROUP {group|DEFAULT}}}]
                    parameter_list
                    [{PERFORMING subr}|{CALLING meth} ON END OF TASK].
    Transactional RFC
    3. CALL FUNCTION func IN BACKGROUND TASK
                         [DESTINATION dest]
                         parameter_list
                         [AS SEPARATE UNIT].
    Use help function of your ABAP editor for more details.
    Regards
    Stefan

  • Error during presentation services restart

    I get the following error during presentation services restart, Are there any compatibility issues with-in our product ?  Here is our set-up : OBIEE 11.1.1.6.7 Linux 6.3 DB - Oracle 11g R2
    sawlog0.log:[2013-08-12T15:27:56.000-06:00] [OBIPS] [ERROR:1] [] [saw.webextensionbase.init] [ecid: ] [tid: ] ODBC driver preload failed. ODBC library name: 'libnqsodbc64.so'[[
    sawlog0.log:[2013-08-12T15:27:56.000-06:00] [OBIPS] [ERROR:1] [] [saw.webextensionbase.init] [ecid: ] [tid: ] libnqshttpclientwrapper64.so: ELF load command past end of file[[
    sawlog0.log:[2013-08-12T15:28:02.000-06:00] [OBIPS] [ERROR:1] [] [saw.webextensionbase.init] [ecid: ] [tid: ] ODBC driver preload failed. ODBC library name: 'libnqsodbc64.so'[[
    sawlog0.log:[2013-08-12T15:28:02.000-06:00] [OBIPS] [ERROR:1] [] [saw.webextensionbase.init] [ecid: ] [tid: ] /u01/app/oracle/product/11.1.1.6/mwhome1/Oracle_BI1/bifoundation/server/bin/libnqutilityclient64.so: undefined symbol: _ZN13DynamicLoader11makeLibNameERKN7_SASSTL4ropeIwNS0_9allocatorIwEEEEbS6_[[
    Thanks for your help

    you need to add these below variables
    ORACLE_HOME=/opt/oracle/shared/product/11.2.0
    export ORACLE_HOME
    TNS_ADMIN=/var/opt/oracle
    export TNS_ADMIN
    PATH=$ORACLE_HOME/bin:$PATH
    export PATH
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
    export LD_LIBRARY_PATH
    not the same as above as your DB client may have a different path
    and then restart the services

  • Were can i find Apple Service Diagnostics 2.5.8

    were can i find Apple Service Diagnostics 2.5.8

    Hello, if anybody had any clues, you're the only one that can see your eMail in your profile.

  • Itunes error during install service apple mobile device failed to start.. help

    I had to install Chrome browser in order to use my gmail account.  Now I cannot open itunes on my Window Vista computer, get a Microsoft Visual C++ Runtime Library. R6034. I uninstall itunes and reinstall itunes 64-bit itunes installer.  During install received error during the 'starting services' process "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privelges to start sytem services. I ignore with the same error message so I abort. At the end of uninstalling I received the Microsoft Visual C++ Runtime Library error again. I click ok than an error from itunes. "itunes was not installed correctly. Please reinstall itunes. Error 7 (Windows error 1114). I click ok.  Help.. 

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Adapter_plain and engine error during test service

    Hi All,
    Am not able to test the adapter_plain service under default_host->sap->xi. When i do a Test Service i get an Action Cancelled page with the url http://iscsapapp4w:8010/sap/xi/adapter_plain?sap-client=100
    I checked the Pipeline URL parameters in SLD for my Integration Server BS, httpport setting in eXhangeProfile and specific confirmations IS_URL parameter in sxmb_adm.
    And i get the following error when i Test default_host->sap->xi->engine
    Pipeline ID which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=100)

    Synchronous RFC
    1. CALL FUNCTION func DESTINATION dest
                         parameter_list.
    Asynchronous RFC
    2. CALL FUNCTION func STARTING NEW TASK task
                    [DESTINATION {dest|{IN GROUP {group|DEFAULT}}}]
                    parameter_list
                    [{PERFORMING subr}|{CALLING meth} ON END OF TASK].
    Transactional RFC
    3. CALL FUNCTION func IN BACKGROUND TASK
                         [DESTINATION dest]
                         parameter_list
                         [AS SEPARATE UNIT].
    Use help function of your ABAP editor for more details.
    Regards
    Stefan

  • Error during web service invocation

    Below are the error details I'd received while trying to
    invoke a web service using CFINVOKE.
    Please help me to resolve this.
    Thanks
    Could not generate stub objects for web service invocation.
    java.net.ConnectException: Connection refused: connect It is
    recommended that you use a web browser to retrieve and examine the
    requested WSDL document for correctness. If the requested WSDL
    document can't be retrieved or it is
    dynamically generated, it is likely that the target web
    service has programming errors.

    Did you configure the web service client (which is bpel) for message level security ? It seems your bpel is sending some ws-security soap headers which the remote service is not able to understand (possibly , the remote server might not have been configured for ws security)

  • Apple Service Diagnostics v2.6.3

    Hello all,
    I need to obtain a copy of ASD v2.6.3 for a late 2005 G5 Quad. According to Apple "it's just not available anymore."
    I do recall that these images were available at one point in time for download but I can't find them anymore.
    Can anyone please assist me in obtaining a copy of this particular disc image?
    Thank you!
    PowerMac, Mac OS X (10.5.8), Late 2005 G5 Quad

    Hello,
    It's never been available to the public, just approved Apple techs.
    But IF anybody had a clue, your eMail is hidden from site in your profile, only Apple & you can see it.

  • Apple Service Diagnostics

    Is it possible to load more than one version of ASD on the same hard drive using separate partitions? Example: I have 3S135 for the new macbook 13" and the newer imacs. I want to use 3S115 for some of the older machines I service.

    There would seem to be something wrong with your graphics card, you should probably take it in and have it replaced.

  • Apple Service Diagnostics "OpenGL Point Test"

    Good morning,
    I have an iMac G5 that I ran ASD on and it's failed on test #52 - OpenGL Point Test.
    I can't find anything online about what this means. Does anyone know what this means? The computer won't fully boot. I just get to the gray apple with a spinning gear.
    Thanks

    There would seem to be something wrong with your graphics card, you should probably take it in and have it replaced.

  • Logic 9 sudden motion sensor error.

    Hi Guys,
    my rig often gives me the "system overload, sudden motion sensor" error during playback, its driving me nuts, the thing that really gets me is that its a mac pro, booting off an SDD, audio is running off a fast drive and the whole lot is in a shockmounted flightcase, i have no idea how the sudden motion sensor could be doing anything at all.
    does it have something to do with the 2.5" SSD the rig boots off?

    Hi - I am experiencing this error as well. I believe the issue is due to Logic Pro not quite ready for Lion. I just bought a new iMac 2.5 GHz 4GB RAM.  Got it to run Logic, and found 9.1.1 doesn't even run on Lion. After upgrading to 9.1.5 the first thing I tried to do was open the demo projects from The Killers and Lilly Allen, to see what this software is all about. Logic hangs somewhere while loading all of the tracks/software instruments, and needs to be Force Quit. The Santigold project loads but it gives me this error about a minute into playing it:
    Disk is too slow or system overload
    (-10010)
    The sudden motion sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time.
    I do not yet have an external drive and am not sure if running project files off a fast external (as opposed to the system drive running Logic) would resolve the issue. But I notice the error is broad and basically multi-purpose, not necessarily stating that your hard drive has parked for sure, rather that disc/system performance couldn't keep up. I haven't duplicated the error when playing my own projects, with less tracks/software instruments. I think that there may be a threshold where you can just push logic too far for Lion interoperability on this 9.1.5 release. Hoping for a new release soon! Good Luck!

  • Which Service Diagnostics for Dual Core 2.3?

    Hey there, any idea what version of Apple service diagnostics work with 2.3 Dual Core G5?

    Hi, not positive, but I think the Dual Core ones use ASD 2.6.3

  • Error during iTunes 10 installation - iPod Service failed to start

    Hi Everyone,
    I am getting this error during installation of iTunes 10(Windows XP).
    +*"Service (iPod Service)failed to start.Verify that you have sufficient priveleges to start system services."*+
    *Can any of you please help?* I ignored it first and continued with the installation. Then tried to update iphone to iOS 4.1 which crashed. I had to go to Apple store to get my iphone restored. I am having trouble installing itunes and cannot restore data from backup.
    I tried uninstalling itunes and deleted all itunes data as suggested by the guy at the Apple store. Still not working. Will appreciate if someone can help resolve this error. Thanks.

    I just got off the phone with Apple tech support. The problem with that iPod Service is a problem with XP Service Pack 3, but can be fixed this way:
    1. Right click on "My Computer", select "Properties"
    2. Click on the Advanced tab.
    3. in the Startup and Recovery section, click the Settings button.
    4. Click the Edit byutton to edit your boot.ini file in notepad.
    5. Look for "/noexecute=" in the file and change the word after the equals to "optin" (sorry - I don't remember what the original setting was anymore).
    6. Save the file, close notepad, click the OK button on Startup and Recovery window, then reboot.
    The warning message about the iPod Service should stop. Also, this helps with iPhones that are not recognized by Windows or iTunes after an install fails.

  • Apple Mobile Device Failed to Start error during installation of iTunes

    In an attempt to update my iTunes to the latest version, as prompted by a pop-up, the update failed.  I then tried to open iTunes from my desktop but a pop-up displayed that the program wasn't working properly and that I should re-install iTunes.  I removed the program and then attempted to re-install.  Midway through the install, I receive an error message that "Services "Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
    I can either Abort, Retry, or Cancel...none of which completes the install.
    Help.

    Chaps and chapesses,
    I too was having the same problem when I tried to update and then unfortunately uninstall and re-install itunes. But, like Nige above me says, you need to uninstall all your Apple software and then re-install itunes.
    Have a look at the response given to this forum post:
    https://discussions.apple.com/thread/5819470?tstart=0
    I did exactly as the turingtest2 said:
    I removed all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Then I restarted my computer, and the install of itunes worked like a dream. None of this ignore, abort, cancel nonsense.
    Hopefully all your respective versions of itunes will work soon. Cheers Nigel280

  • Error message received -  Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start  system services.

    I've done it 6 times the steps you mention to get this thing to work but still it doesn't work for me. I've downloaded iTunes, installed it, and again the same message it's going on Error message received -  Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start  system services.
    I've deleted iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour, restart my computer and downloaded again (6 times) and still doesn't work for me. What should I do?

    I deleted all Apple products you mentioned above (iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour), deleted the prior downloads I had previously tried to install and then emptied my recycle bin.  Then I started with a new download of iTunes before the problem was solved for me.
    It really ***** that Apple does not give any direct support for its own products.
    Good Luck

Maybe you are looking for