Separate domain name form name in email

Hello, I have an interactive report form which has email column. By default the email column is filled with [email protected] Now I need to display that to be as a.b (How do I remove domain name). How can I do that?
Thanks in advance.

pravish wrote:
Hello, I have an interactive report form which has email column. By default the email column is filled with [email protected] Now I need to display that to be as a.b (How do I remove domain name). How can I do that?
Seriously? By applying some basic SQL functions. Change the email column in the query to a SQL expression and column alias like
substr(email, 1, instr(email, '@') - 1) email
or, if you want to burn some more CPU, a regular expression is another way to do it:
regexp_substr(email, '^[^@]*') email

Similar Messages

Need help isolating specific domain name extensions when validating emails

Dear fellow Java developers:
I am trying to write an application in Java using regexp in order to validate a form where a user submits their name, along with their email address. One thing I need to do as part of this application is isolate email addresses with certain extensions. For example, I would like to be able to test to see if a users email address has the top level domain extension ".ca", or has a second level domain extension of the form ".on.ca", ".co.uk", or ".org.uk", etc. Which means that if a user submits an email address that ends in .ca, or .on.ca, the block of code would be able to pick it out by checking against a predetermined regexp, and I would like the regexp to be able to check email addresses that contain a top level extension only(e.g. .ca), or addresses that contain a second level country code extension (e.g. .co.uk).
I tried using the following regexp in my java code, but for some reason, it is not working:
^[A-Z0-9._%+-]+@[A-Z0-9.-]+\.(?:[A-Z]{2}|com|org|net|gov|mil|biz|info|mobil|name|aero|jobs|museum)$
Like the above example, I would like a regexp that would allow me to specify the particular domain extensions that I am looking for ONLY, instead of being a generic one that allows all valid email addresses to pass through.
I have attached my java code that I am using at the moment below. For some reason, when I submit a command line argument of "[email protected]", I am always getting an output of "[email protected] is valid ? false" . Why is that? I can't figure this out, and would appreciate any help on this. I hope this question is clear to everyone.
Thanks in advance to all who reply.
package com.email;
public class Email {
         * @param args
        public static void main(String[] args) {
                // TODO Auto-generated method stub
                if( args.length == 0 ) {
                      System.err.println( "Usage: Email [...]" );
                      System.exit( 99 );
                for( int i = 0; i < args.length; i++ ) {
                        try {
                                System.out.println( args[i] + " is valid ? " + emailVerify( args[i] ));
                        catch( Exception e ) {
                                System.out.println(args[i] + " : " + e.getMessage());
        public static boolean emailVerify(String email){
                String regexp = "^[A-Za-z0-9._%+-]+@[A-Za-z0-9.-]+\\.(?:[A-Za-z]{2}|ca|uk|au)$]";
       if (email != null) {
            return email.matches(regexp);
       } else return false;
}

I wouldn't bother with a regex, but I guess ymmv. I think this is much easier to read and understand:
private final boolean isInValidDomain(final String emailAddress) {
    if (emailAddress.endsWith(".ca")) return true;
    if (emailAddress.endsWith(".on.ca")) return true;
    // etc...
    return false;
}Depending on the number of tests and how often you'll change, you may want to put them in a Database/File and read them into a collection to iterate over.

I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns

I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns - the first containing the name, the second containing the email address and the third containing the 'yes' or 'no'.
Can you help me ?

The question that needs to be answered is what is separating the columns? Is it a single tab, one or more tabs, spaces, or what? Or is it the brackets that makes the separation between the three pieces of data?
If it is always a single tab, that makes it really easy. All you have to do is find/replace the brackets with nothing (as Wayne said)
If it might be multiple tabs, you can find/replace tab-tab with a single tab and repeat that a few times until no more double-tabs are found.
If it is one or multiple spaces, that might be difficult. I'll think about this one if this is what you have. I'll ignore this possiblility for now.
If it is the brackets separating the three pieces of data, you would Find/Replace the left bracket with a tab then do the same with the right bracket.

Creating multiple web sites for separate domain names

Is it possible to create a different web site using a different web address in IWeb 06? A friend asked me to make a web site for them....can/how do I publish it to a different address?
Thanks for the help!

Welcome to the Apple Discussions. The best way is to have a separate domain name for each site you want to manage. When you publish the sites each will have a separate URL. It will be:
http://web.mac.com/your .Mac account name/the site folder name/index.html
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
This lets me edit several sites and only republish the one I want.
OT

Lists: domain name host name?

In the 'General' tab of the Mail service window in Server Admin I've got the following:
Domain name: subdomain.mydomain.com
Host name: mail.mydomain.com
So my e-mail addresses like [email protected] work fine. But what's weird is that when I'm creating mailing lists , the internal users get added to it like this: [email protected]!? Why is it that? Why don't they get added with [email protected]?
Because the problem is if they send something to the list, it gets denied because the mailing list considers them non-members!
Any ideas what the problem could be and how to correct that?
Thanks.
Xserve Mac OS X (10.4.3)

All,
From the Mail Service PDF Manual;
"Adding a Subscriber to an Existing List
This is the same procedure as adding a user to a newly created list.
To add a subscriber to an existing list:
1 In Server Admin, select Mail in the Computer & Services list.
2 Click Settings.
3 Select the Lists tab.
4 Select the List to which you want to add a subscriber.
5 Click the Add button under the Members pane.
6 Enter the recipient’s email address.
The email address must match the return address of the recipient to post messages
without administrator approval.
If a user was added via the “Users and Groups” button, the email address in the list will
be in the form of “[email protected]”. If necessary, change the email address in
the mailing lists panel of Server Admin to match the return address used by the client.
7 Assign the subscriber privileges.
8 Click OK."
In other words, click in the user's email field and edit the address to suit - by default Mailman treats the list as belonging to the machine's host name, not to the email domain/sub-domain, which is the most logical since you could have multiple domains/sub-domains configured.
Regards,
Ian

Migrating multiple domains with same name - how? Rename? Migrate through temporary domain?

Hi,
we have acquired another company, and they have multiple, separate domains with the same name (every site has a domain with NetBIOS name "COMPANY" and DNS name "company.local"). Now we want to migrate all these domains into ours using
ADMT.
Unfortunately, we did not manage to migrate one of these domains completely, so the trust must remain established for some time. But we have to continue with the second domain - which normally would require a trust, but of course we can't establish a trust
to two domains with the same name at the same time.
I found two potential solutions for the dilemma, but I'm not sure if both are reasonable:
1) Rename the domain with RENDOM.EXE to COMPANY2 and company2.local and then migrate with ADMT
2) Migrate COMPANY to a temporary domain such as COMPANYTEMP and then migrate from COMPANYTEMP to our domain
Given that there are roughly 100 users, 2 domain controllers and 8 other servers, what would be the better approach? Is option 2 possible at all, so would I be able to use the sidHistory attribute migrated from the original COMPANY domain in our domain at
all?
There is also an Exchange 2007 server, which seems to make option 1 impossible unless we find another way to migrate it (like, export all mailboxes to PST before migration) ...

Ok, that's what I expected. Still, I have servers in the old domain, so if I do these steps:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
disconnect the domain COMPANY(right) ,
users will lose connectivity to any servers in the domain. I understand that it does not work with all domains connected? Of course I can't make OURCOMPANY's domain controllers see the DCs of COMPANY (right) in DNS (though I could achieve it the other way
round).
My original plan was:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
create trust between OURDOMAIN and COMPANYTEMP
then do the migration with sidHistory from
COMPANYTEMP --> OURDOMAIN,
Migrate users
Migrate computers
Migrate servers
remove trusts and old domain
But I see that this will not work out, right? So, my only option would be:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
Migrate computers and servers to COMPANYTEMP
Install new Exchange server in COMPANYTEMP
migrate mailboxes to COMPANYTEMP
disconnect / abandon COMPANY(right)
create trust between OURDOMAIN and COMPANYTEMP
then do the migration with sidHistory from COMPANYTEMP
--> OURDOMAIN,
Migrate users
Migrate computers
Migrate servers
Migrate mailboxes
remove trusts and old domain
And to minimize user impact, all this would have to be done in one go (over night), which is hardly possible .........................

Change Groupwise system name, po name and domain name?

Hello Board,
we want to migrate a Groupwise 7 System (Netware) to a Groupwise 8 System (Linux).
Doesnt sound that difficult, but we dont want to use the names for the system name, the post office and the domain (groupwise domain, _not_ internet domain) which were used on the old system.
Currently iam trying the way mentioned in TID 10077372, which mentions merging the two systems and then delete the old System.
Am i on the right way? Do you have any hints?
Any help appreciated.
best regards
sven

Grewes,
Ok you have a GW system(s) that you do not like the names and you want to change them. Not a problem. As you stated, and as Tommy said -merging works.
The process you need is to build a new GW system -same as the version you have running preferred. Set it up as you like it -name-wise. Then, merge the older systems (branches) into the new system you built. Then you will have to build new domains/post offices and move mailboxes from the old GW branches into the new domains/post offices. When its all done -delete the old, and you are done.
I have done many different variations of this type of migration/merge/consolidation. It works, its just a lot of work. Just make sure to plan it all out on paper first, document it, then go forward.
Good Luck!
Take Care.
Gregg A. Hinchman
Consultant
[email protected]
www.HinchmanConsulting.com
A Novell Consulting Partner
317.329.0288 Office
413.254.2819 eFax
"Courage is doing what is right."
"Do not be bound to any doctrine, theory or ideology, even Buddhist ones. All systems of thought are guiding means, not absolute truth." Thich Nhat Hanh, Vietnamese monk.
Book Travel @: www.booknewtravelnow.com
>>>
From: grewes<[email protected]>
To:novell.support.groupwise.migrations
Date: 8/20/2009 6:56 AM
Subject: Re: Change Groupwise system name, po name and domain name?
Thank you for your reply.
I do not want to keep the names.
If i want to link this domain to another branches domain and the domain
is called the same this doesnt work AFAIK.
grewes
grewes's Profile: http://forums.novell.com/member.php?userid=3563
View this thread: http://forums.novell.com/showthread.php?t=383606

Satndard SAP script or form name to generate FI invoice

Plz let me know if u know the standard SAP script or form name to generate the FI invoice.
Regards
Nivetha.

Hi,
I guess the terminology's causing some problems. Here's what I think you need to do;
In transaction V/30 select the Output Type then double-click on the folder 'Processing Routines'. The columns are as follows;
Medium - Print, email etc
Program - Name of the print program
FORM Routine - name of the subroutine in the print program that will be called
Form - Name of the SAPscript (if used)
PDF/Smartform Form - Name of the Smartform, or pdf form (if used)
Type - If a Smartform or pdf form is specified, select from this drop-down which type it is.
If you're getting an error when you enter your parameters, it would be useful if you told us what the error was.
Regards,
Nick

Rule name as part of email message

Hi,
We have a requirement to have rule name to appear in email text when any deficiency is identified. After going though previous posts, i realized it can be accomplished via tcode SE61. Can someone give me detailed steps to include rule name in email text.
Regards,
Amar

You can look at the rwservlet.properties file in the $ORACLE_HOME/reports/conf directory on your application server. The entry will look something like:
SERVER=rep_mysrv
You can look in your tnsnames.ora file in the $ORACLE_HOME/network/admin folder on your application server. The entry will look something like:
REP_MYSRV.DOMAIN.COM = (ADDRESS = (PROTOCOL = tcp)(HOST = mysrv)(PORT = 1950))
where REP_MYSRV is the name or your reports server.
You can also look in Enterprise Manager - App Server Control:
http://mysrv.domain.com:1810
You have to login. Once logged in, you should see the name of your reports server.

Please delete my name form Forte User Forum

Please delete my name form Forte User Forum. >
Name : Francis Seron
Email Address : [email protected]

>
Please delete my name form Forte User Forum.
-Toby Weiss
Your Name : Toby Weiss
Email Address : [email protected]
Organization : Computer Associates International

Follow up - DNS (internal domain has same name as external website)

Hi,
I am following up with on previous blog entry about resolving an domain internal name to an external website found here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4d97325b-ff3a-4f46-ba6e-dc3f4ff978e1/dns-internal-domain-has-same-name-as-external-website
On October 30, 2014
HayashiTech provided a response suggesting the use of netsh interface portproxy on the DC's to resolve this issue. There has been no feedback to this suggestion and I am very curious what opinions are out there for this suggestion as it appears to be the
best option provided yet.
Thank you in advance as well for all the great guidance I have found provided by Ace and his followers.

Interesting question. I've not seen that solution before, but having done a test on my lab setup it certainly seems to work as expected. Eg, using :
netsh interface portproxy add v4tov4 listenport=80 listenaddress=dc1.abc.com connectport=80 connectaddress=www.abc.com
on my DC where I've setup a working external domain name with the www record pointing to the website, and the non-www record pointing to the DC, requests to the non-www address are successfully being redirected to the www address (after confirming it didn't
happen prior to adding the portproxy).
So on the face of it that does look like a workable solution. I haven't used it myself in anger obviously, but the two downsides I can think of immediately to this solution are :
1) This operates as a proxy, so unlike the IIS method that Ace mentioned where it would tell the client to go to the www address instead (so the client connects direct), this method keeps your DC acting as a middle man, eg all communications to that address
go through your DC rather than direct from the client to the website. Depending on what they're doing on the website this may or may not be an issue for you.
2) Since the client is continuing to connect to the DC throughout, if you ever did need the have something on the DC responding to port 80 then you could have issues. That said, according to
https://technet.microsoft.com/en-us/library/cc731068(v=ws.10).aspx the portproxy listenaddress can be a FQDN rather than IP, so that could mitigate any issues there.

In Mail, the "From" line shows the wrong name associated with the email id. How do I update it?

In Mail, the "From" line shows the wrong name associated with my email ID. I've looked over preferences and account information but have not found where I can update it.

There isn't an email address associated with the contact name who appears as the "from" in Mail. It used to be a shared email address and I already had updated the contact to list only the phone number in case that was causing the problem.

Page/Report/Form Name

Hi All,
Can anyone tell me which view would have the page/report/form name stored?
Thanks in advance.
Annie

Hi Annie,
You can check for Apex views by running:
SELECT DISTINCT APEX_VIEW_NAME FROM APEX_DICTIONARY ORDER BY 1Hopefully, the names should be sufficient to determine the views you need. Once you have found one (eg, APEX_APPLICATION_PAGES), you can do a SELECT on it
Andy

Can I run 2 different domains with same name but on 2 different machines?

I am trying to setup 2 domains with same name (sharedcds1) on 2 different machines (Machine1 and Machine2).
          When I start the weblogic managed server 1 (sharedcds1managedserver1) on Machine2, it throws an error saying it has some conflicts with the managed server 1 running on Machine1. How did the managed server of one machine know about the other server. Can I run 2 different domains with same name but on 2 different machines?
          Here is the error in the log -
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 4596206652609838848S:130.170.61.153:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 8842351474821025197S:130.170.61.154:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          Thanks
          Satish

Yes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
          although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names.

How to change the name or have no name for an iCloud email alias

I had MobileMe on the iPhone with alias email addresses and I liked how it didn’t attach any “name” to an alias. For example, I had MainUserName, then for aliases I would have [email protected], [email protected], etc. When I sent an email from my iPhone using one of the aliases as the "from" no name would be associated with the alias email address. If it was the MainUserName then it would associate it, e.g. Main User <[email protected]> will show up on the "From" field when I sent an email. But with iCloud on the iPhone (and iPad), it’s Main User <[email protected]>, Main User <[email protected], etc., which I don’t want. If anything it should be Alias 1 <[email protected]> or Alias 2 <[email protected]>. Anyway, I don't want any name associated with the aliases, so when I send an email it will simply say [email protected] or just [email protected] with no name association.
It works differently if I access iCloud through a web browser. If I send an email via iCloud on the web, I can customize and have a different name with each alias, e.g., Tom <[email protected]> or Harry <[email protected]> And the customization carries over to the Mail app on my Mac. That would be ideal if the customization carried over to the iPhone and iPad, but I'd be happy if there was no name association with alias email addresses. Hopefully, there's a solution to the iPhone/iPad situation with iCloud as I don't want the name linked with the main iCloud email address linked with all the different email aliases I have.

Set-Mailbox -Identity Mailbox1 -PublicFolder -Name NewName1 -Alias NewName1 -PrimarySMTPAddress [email protected]
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Separate domain name form name in email

Similar Messages

Maybe you are looking for