Sequence does not keep up with playhead on timeline. Shouldn't it?

Hi!
When I view a sequence of clips on the canvas, I expect the timeline sequence to keep moving left off screen as the playhead moves right. Instead, the playhead disappears off screen to the right and the sequence of clips remains on the starting blocks. At the moment, I keep up with the playhead using the left/right scroll on MM. Is there a way of automatically syncing - on screen - the movement of clips and playhead?
Regards.

Nope. FCP doesn't work that way.
If you believe it should, send the FCP team feedback using the FEEDBACK selection under the FCP item located in the FCP Menu bar.
x

Similar Messages

Finalization thread does not keep up with Object allocation

Hi,
I'm trying to track down a memeory leak in my program. When I use OptimizeIT I find 11,690 instances of java.lang.ref.Finalizer hanging about. I also see lots of JDBC Connection, CallableStatements, and PreparedCalls hanging around. (They are actually instances of my vendor specific classes). Those objects include a finalize() method.
Why are all these java.lang.ref.Finalizers hanging about? Why doesn't the finalization thread actually let go of them or finalize them in a timely manner! Eventually, my process runs out of memory and the Finalization thread never seems to finalize these objects. The rate at which I am newing up connections seems to be faster than the finalization thread can destory the object.
charlie
p.s.
When I go into the reference graph, there are lots of Connection objects that don't have link back to the root set. But, they are never GC'ed when I push the GC button. While OptimizeIT doesn't show the finalization thread holding a reference to them, I believe OptimizeIT 4.2 hides the java.lang.ref.Finalizer reference that points to your object. The reference inside java.lang.ref.Finalizer is actually inside a super class called java.lang.ref.Reference. Why I don't know? But, someone with OptimizeIT 4.1 said that they see more information than I do in OptimizeIT 4.2. Also when I do a show Outbound References I don't see the instance members for the super class. (Namely java.lang.ref.Reference.referent) Is anyone familiar enough with OptimizeIT as to why this is occuring?

>
Well thanks for the advice, jschell, but I am cleaning
up my connections by calling close(). But, keep the
great advice coming. I didn't think this forum had
quite enough worthless, cynical advice. For the
benefit of developers who read this forum for some
worth while advice. I'll post my findings.
Hmmmm...others seems to think my advice is worthwhile.
Some have even come to think that my advice is worthwhile after posting remarks like the one above.
What's really interesting about this problem is that
this has nothing to do with whether you call close()
or not. In fact, you could've called close() and
cleaned up properly, and your program could still leak
memory! It hinges on objects that implement the
finalize() method.
Your program, or third party libraries, or even the JVM can leak memory.
My JDBC vendor, like many, includes a finalize()
method in the implemention classes of Connection,
ResultSet, PreparedCall, etc. Naturally, this is to
clean up a connection when a programer has lost a
reference to a connection without calling close, but
it has a serious side effect.
Could be.
And your JDBC vendor would be?
I certainly know of JDBC vendors who do use finalize. Seems reasonable since the JDBC spec suggests it.
And I have used JDBC drivers that use it in 24x7 server operations and I have not traced a leak to those drivers yet.
So to my mind that suggests that finalize by itself is not a problem.
I've tested this will a class that simply does a wait()
call in its finalize() method. Then I allocate lots
of other objects that contain a finalize() method,
and watch the free memory fall. Just as a guess I would say that that is a really bad thing to do. My first guess would be that it would just lock up the JVM. Since it doesn't that would suggest that the JVM is creating one or more threads to call finalize.
Threads take memory.
And when you call wait you suspend those thread indefinitely.
So I would expect to see memory fall.
>
Seems like to me that it's better to leak memory, than
to try to clean up for the programmer. While
researching this problem I ran across a long post on
the .NET mailing list on finalization in .NET, and
they seem to say the same thing that Sun says which is
that the use of a finalize() method that the system
will call implicitly is a bad thing. You should
always use an explicit call like close().
I would guess that memory collection in .Net is going to be less robust than in java. It simply hasn't been around long enough.
While the fix for my problem is quite simple, remove
the finalize() method from the wrapper class. But, I
haven't run across any documenation on Sun's site or
the internet that has run across a memory leak quite
like this.
I however, have read, and participated in quite a few threads on this site where many people have suggested that you should never use finalize.
I think there are even a couple examples that show exactly how using finalize can generate memory leaks.

Coverflow does not keep up with songs

I have my touch set up on the little plastic stand on my desk at work and have a playlist selected and playing. It is turned longways obviously to sit in the stand. Coverflow never changes unless you physically pick up the touch and turn it round, that triggers the change. Annoying - it should change as the playlist moves to a new song. Also on coverflow , you cannot adjust volume, etc, again you have to take it out of the stand and flip it around. Since they give you the stand , it would be nice to have more functionality in that mode.

Already covered, see THIS THREAD
Please send Apple feedback:
http://www.apple.com/feedback
Scott

When I download my i tunes music from computer it does not keep my greatest hits albums from certain artists together it scrambles them with other artists is this because of the way I have my music library on my computer set up.

When I download my i tunes music from computer it does not keep my greatest hits albums from certain artists together it scrambles them with other artists is this because of the way I have my music library on my computer set up.

See Grouping tracks into albums.
tt2

How do I keep format when copying a table to keynote? paste and match style does not keep format

how do I keep format when copying a table to keynote? paste and match style does not keep format

It used to work until recent updates and it is very frustrating.....I hope someone out there knows how to deal with this.

Why do my songs and audio books keep getting erased when I add a new book? Now some books will not play and the iPod does not keep track of where I was when I pause a book, leave for music and then go back!

About a month ago I added some new audio books to my iPod Classic and then after disconnecting, I discovered EVERYTHING had been erased.
I had to restore through my iTunes but then I could not load my music back on.
I uninstalled / reinstalled iTunes and completely reformated the iPod drive.
I successfully got my music and books back on but then added a new book two days ago only to discover everything got erased AGAIN!!!
Of course, my 1 Year Warranty was up about a week before the first incident.....
I formatted the iPod again, uninstalled / reinstalled iTunes (it was freezing during sync) and downloaded all my music and books again.
Now I have several books that will not play (they play on iTunes and they played on the iPod before all these events) and the iPod does not keep track of where I was in a book when I have to stop and go to something else.
Does anyone know what is going on with this thing??? I have a 5th Gen Video and in all the years I've had it, I've NEVER had problems like this!
Does anyone have any ideas on what I can do to get my iPod Classic up and running properly again?
Thanks.

When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised filesytem structure at the start of the Sync.
The timeout failure could be due to
Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
Have a nice day!

Error creating sdo_pc point cloud: "ORA-02289: sequence does not exist"

Oracle Database 12c Enterprise Edition Release 12.1.0.1.0
I've come across a problem when creating point clouds - every so often I'll get an error about a sequence not existing.
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: DROP SEQUENCE "MDPCS_a_17745$$$"
ORA-29400: data cartridge error
ORA-02289: sequence does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 171
ORA-06512: at "MDSYS.SDO_PC_PKG", line 179
ORA-06512: at line 17
I've got a test case which creates a table where we'll put a sdo_pc, a block table and then a loading XYZ table. We then loop a bunch of times and create a PC for each.
Test case setup:
create table pc_test (
    id integer primary key,
    pc sdo_pc);
create sequence pc_test_id;
create table pc_test_blocks as select * from mdsys.sdo_pc_blk_table;
create table xyz (
    rid number,
    val_d1 number,
    val_d2 number,
    val_d3 number);
insert /*+ append */ into xyz (
    select
        rownum,
        round(dbms_random.value(1,10000),2),
        round(dbms_random.value(1,10000),2),
        round(dbms_random.value(20,50),2)
    from dual
    connect by level <= 1000);
commit;
Run test case:
declare
l_pc sdo_pc;
    l_id pls_integer;
begin
    for i in 1..50 loop
        l_pc := sdo_pc_pkg.init(
            'PC_TEST', 'PC', 'PC_TEST_BLOCKS', 'blk_capacity=500',
            sdo_geometry(2003, 2157, NULL, sdo_elem_info_array(1,1003,3), sdo_ordinate_array(400000, 500000, 800000, 1000000)),
            0.005, 3, null);
        l_id := pc_test_id.nextval;
        dbms_output.put_line('PC_TEST id=' || l_id);
        insert into pc_test (id, pc) values (l_id, l_pc);
        sdo_pc_pkg.create_pc(l_pc, 'XYZ');
    end loop;
end;
Some of the PCs will create, but eventually it'll blow up with
ORA-02289: sequence does not exist
In so far as I can tell, once I call sdo_pc_pkg.create_pc(), Oracle is creating a sequence with a name such as MDPCS_a_1751F$$$. When it is done creating the blocks, it then tries to drop the sequence. However the statement to drop the sequence is wrapped in double quotes - so if the sequence name contained any lowercase letters then it will error out when trying to drop it. The values used between the underscores seem to be hexadecimal - sometimes they're numbers only, sometimes numbers and uppercase letters, sometimes numbers and lowercase letters.
Has anybody else come across this issue?
The issue isn't critical as the PC blocks do seem to be created correctly, so the issues are: (a) my pl/sql block errors out and (b) I'm left with sequences lying around.
For the former I'll catch the exception and ignore it, for the latter I'll just drop the sequences myself afterwards.

I tried the test on 11.2.0.4. On that release I get an error during a rename:
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: RENAME "MDPCI_a_26062$$$" TO "M3_A_26062$$"
ORA-29400: data cartridge error
ORA-04043: object MDPCI_a_26062$$$ does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 157
ORA-06512: at "MDSYS.SDO_PC_PKG", line 74
ORA-06512: at line 17

Error: Sequence does not match type xs:string

I am using BDB XML 2.5.16 to store and query my XML documents in Java. The documents are IMDB xml documents containing actors information
obtained from INEX website https://inex.mmci.uni-saarland.de/login.jsp. One of the document I stored in the database is the following
    <?xml version="1.0" encoding="UTF-8"?>
     <persons>
      <person>
          <name>jason angeles
          </name>
          <filmography>
             <act>
                <movie>
                   <title>prison planet 3 the revenge 1998
                    </title>
                  <year>1998
                  </year>
                 <character>evil ninja
                  </character>
               </movie>
             </act>
          </filmography>
         </person>
         </persons>
I want to search using XQuery for filmography element whose title element contains ANY of the following keywords ('planet', 'revenge', '1998'). Below is the query I used
              // declaring function functx:contains-any-of
            String qryRk = "declare namespace functx = 'http://www.functx.com'; "
                  + "declare function functx:contains-any-of "
                 + "( $arg as xs:string?" + " , " + " $searchStrings as xs:string* ) as xs:boolean { "
                 + "some $searchString in $searchStrings "
                + " satisfies contains($arg,$searchString)} ; ";
             String myQuery101 = qryRk + "for $entity in collection('simpleExampleData2.dbxml')//filmography "
                  + "where functx:contains-any-of ( $entity/act/movie/title , ('planet', 'revenge', '1998'))"
                  + "return $entity";
When I execute the query i expect to get at least get the following element as mu output
                       Document : person_31000.xml:
                    <filmography>
                           <act>
                                 <movie>
                                 <title>prison planet 3 the revenge 1998
                                </title>
                                <year>1998
                                </year>
                               <character>evil ninja
                               </character>
                              </movie>
                           </act>
                         </filmography>
However instead of the above element i got the following Error
                             Exception in thread "main" com.sleepycat.dbxml.XmlException: Error: Sequence does not match type xs:string? - the sequence contains more than one item [err:XPTY0004], <query>:1:343, errcode =
                              QUERY_EVALUATION_ERROR
                                  at com.sleepycat.dbxml.dbxml_javaJNI.XmlManager_query__SWIG_0(Native Method)
                                  at com.sleepycat.dbxml.XmlManager.query(XmlManager.java:544)
                                 at com.sleepycat.dbxml.XmlManager.query(XmlManager.java:320)
                                 at xmlirsystemstruxplus.XQueryEngine.queryEngine(XQueryEngine.java:269)
                                 at xmlirsystemstruxplus.XMLIRSystemStruXplus.main(XMLIRSystemStruXplus.java:109)
                                 Java Result: 1
    Note that i used contains-any-of() function because the contains () function does not work with 'planet revenge 1998' string may be because the keywords do not appear in the order they appear in the element content.
   Please can any body help me to find out (1) why i have the above error ? and solution (2) why the condition contains ( $entity/act/movie/title , 'planet revenge 1998') is not working ? how do i use contains() function w.r.t this
Thank you in advance
Message was edited by: RokoA 19/01/2015 by RokoA

Using the shell dbxml in both 2.5 and 6.0 I created a container and put the document example you gave into it. Then I executed the following query:
[code]
declare namespace functx = 'http://www.functx.com';
declare function functx:contains-any-of ( $arg as xs:string?, $searchStrings as xs:string* ) as xs:boolean {
some $searchString in $searchStrings
satisfies contains($arg,$searchString)
for $entity in collection('simpleExampleData2.dbxml')//filmography
where functx:contains-any-of ( $entity/act/movie/title , ('planet', 'revenge', '1998'))
return $entity
[/code]
And got the results you expected instead of an error.
Since you are using the Java API it is possible the problem is in how you configured and executed the query, instead of in the query itself. If you could post an example program or code section that produces the error, then I can continue you help you with this.
Lauren Foutz

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

FontBook does not keep settings after computer restart

I have thousands of fonts on my HD folder, and a standards set of System and Library fonts. Any time I disactivate and acivate certain font families, my FontBook keeps these settings (for activation and disactivation) ONLY UNTILL next computer restart cycle.
After restart, when I load my FontBook application to check my fonts settings (for to make the fonts I set previously working again), Fontbook starts activating all my thousands fonts in my custom library, taking munites of waiting for a spinning wheel. I also do not see (off) signs for fonts diactivated during previous session. I see lots of duplicate font warning because Font Book is auto-activate all.
Consiquently, I have to reppeat all the process of activation/disactivation and to help my computer working with less fonts load and resolve duplicates.
So, why Font Book does not keep setting for fonts activation/disactivation in a custom library after computer restart?

"*Opened Firefox, which was recently updated to some 3.6 something version. *When opened, it offered to download new vers. 4,* which I initiated. "
Impossible! FF v4 system requirements are Leopard & Snow Leopard. Your system info confirms that you are still running an outdated version Tiger - Mac Book Pro *Mac OS X (10.4.5)*
If that information is incorrect, please correct & provide your current OS in the "My Settings" panel.----->
"(what looked strange that the request was in English, German and some other 2 languages"
What you experienced was a kernel panic. Disconnect all devices from your computer and try the suggestions mentioned in the following:
http://docs.info.apple.com/article.html?artnum=106805 *Mac OS X: "Broken folder" icon, prohibitory sign, or +_kernel panic_+ when computer starts*
User Tips: Kernel Panics

Bridge does not keep my Label Preference

I want to be able to rate my images in Bridge CS3 using only the number keys. So I go to Preferences - Labels - then uncheck "Require the Control Key to Apply Labels and Ratings". This works fine and I'm able to rate images by tapping keys 1 through 5 (for star ratings) then 6 to 9 for color labels.
The problem is when I close Bridge CS3, it does not keep my labels preference. Every time I open Bridge again, the Control key is required to rate images. If I check the preference, that option is once again checked off.
Is there a way to keep that UNchecked???

Adobe has started to release really crappy software. Their bug testing is God aweful, and their willingness to fix their problems is even worse!
Bridge constantly crashes for no reason whatsoever for me. If I leave it open, but haven't used it in a while, when I pull it back up, it often crashes. Explain that! I'm not even doing anything with the program.
I'm having the same problems with labels retaining the preference. Inexcusable, and a complete failure of proper testing.
How long has it been since Vista's been released, and yet there's STILL no native DNG preview? Sure, you can buy one for $30 bucks from a third party. Remind me again why I need to pay a third party to do Adobe's job?
And because they make some of the best stuff, they can get away with this shoddy workmanship. But only for so long. Keep it up guys, and you'll inspire a competitor to do a better job.

T400 does not start up with a battery and AC, but starts up with only AC.

I bought T400, 7417-CTO in Jan 2010. My T400 does not start up with a battery and AC power. I tried to start with only AC power after pulling out the battery, it worked fine. Even when I inserted the battery in T400, which was running perfectly with AC only, T400 seems to lose the power - more strictly speaking, it kept stoping and re-running several times, and finally it dead.
a few possibilities
1) a battery is dead - but it does not explain the failure with both AC and battery
2) some hibernation issue - I plugged in and out the DIMM, and clock battery. I tried to keep pushing the power button trick, but it didn't work
3) Mother board failure??
I really appreciate if you give me some advice on it.
Wanyong

Thanks for all your kind and helpful comments.
Unfortunately, I don't have any friends who have Lenovo - or I don't have many friends here since I moved in the last summer. ;-)
After purchasing a new battery, I will update it. Hope that this thread helps someone who had/will have same prob. as mine.
-WS

Sequence does not match type document()

Hi all,
I am having a problem with building a query - maybe one of you can point out my mistake!
First of all I have a sequence of nodes in the variable '$__mpqfEngineVar_13' which are built in a FLWOR using the following construct:
<engine:document ID='{'NoID'}' recordNumber='{0.0}' Rank='{0.0}' Score='{$__mpqfEngineVar_8}'>{$__mpqfEngineVar_1}</engine:document>
I am trying to filter out those which have a specific value in a descendant node (actually present inside the tree $__mpqfEngineVar_1 from above):
$__mpqfEngineVar_15 := ($__mpqfEngineVar_13[/mpeg7:FamilyName = $__mpqfEngineVar_14])
However I get the following error message:
Sequence does not match type document() - found item of type element({urn:dimis:mpqfQueryEngine:schema:2009}document, {http://www.w3.org/2001/XMLSchema}untyped)
If I use the following relative path instead (which is not an option since the path is user define) it actually works (notice the '*')....
*//mpeg7:FamilyName
Any ideas what I am doing wrong? Honestly I can't really see the semantic difference..
Thanks for your help,
Alex

Hi Alex,
The expression "//mpeg7:FamilyName" is an abbreviated XQuery step that expands to this:
root() treat as document-node()/descendant-or-self::node()/mpeg7:FamilyNameThis shows you why you're getting an error about the root node not being a document node.
I expect that the expression you really want is ".//mpeg7:FamilyName" - the "." prefix makes it a relative path rather than an absolute path.
John

My safari does not keep my history despite all the settings and adjustment i made to the safari preferences so as to be able to keep my browsing history. the browsing history is wiped out whenever i close safari.

i use macbook pro mid 2012, OS X mavericks. my safari does not keep my history desp[ite all the adjustments made to the settings at safari preferences. my browsing history are cleared whenever i exit safari. i dont know why. i want to try and re - in stall it . the safari is version 7.0.1. but i dont know how.

If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Client sync failure: "sequence does not exist"

Hello everyone,
I could use some help on this.Using 10.3 mobile server and a mobile6 client (using the official mobile6 patch). After some syncs, a mobile client gets the error "sequence does not exist", and the replication fails.
When looking at the server log, after the client has successfully uploaded its data, a sequence "M$8232031$M" is created on the server just before the client can download its new data. Then, the server tries to get the nextval from that sequence - and the sequence is not there !!
What happened, what can cause this behaviour ?
Here is an excerpt from the server log with the "faulty" client sync :
clog: Subscription.prepStatement: ALL: SQL: INSERT INTO MOBILEADMIN.C$ALL_MANGLED_NAMES(CLIENTID,ORIGINAL_NAME,MANGLED_NAME) VALUES(?,?,?):
Object: @1da9a66
clog: Subscription.execDirectLogged: FINEST: GENERAL: Created M$8232031$M
clog: Subscription.mangleOS: ALL: FUNCTION: Exiting
clog: Subscription.pstmClose: ALL: FUNCTION: Entering
clog: Subscription.pstmClose: FINEST: GENERAL: pstmt::close
clog: Subscription.pstmClose: ALL: FUNCTION: Exiting
clog: Subscription.mangle: FINEST: GENERAL: conn user =MOBILEADMIN, e[0]=MOBILEADMIN
clog: Subscription.mangle: ALL: FUNCTION: Exiting: user.equals(e[0])
clog: Consolidator.DQ: ALL: FUNCTION: Invoking
clog: O8Server.advanceSequence: ALL: FUNCTION: Invoking
clog: Subscription.execSelectDirect: ALL: FUNCTION: Entering
clog: Subscription.execSelectDirect: ALL: SQL: exec:::
Object: SELECT "M$8232031$M".NEXTVAL FROM DUAL
clog: HeliosSession.startSession: FINEST: GENERAL: Decrement client download 0
clog: HeliosSession.clientDownload: ALL: FUNCTION: Invoking
clog: HeliosSession.startSession: MANDATORY: ALL:
Exception: java.sql.SQLException: ORA-02289: Sequence ist nicht vorhanden.
ORA-02289: Sequence ist nicht vorhanden.
clog: HeliosSession.sendE, s=ORA-02289: Sequence ist nicht vorhanden.
: ALL: FUNCTION: Entering
clog: HeliosSession.sendCompress: ALL: FUNCTION: Entering
clog: HeliosSession.sendCompress: FINEST: GENERAL: deflated total in,out is 52,2 bytes
clog: HeliosSession.sendCompress: FINEST: GENERAL: Sending byte array of 2 bytes
clog: HeliosSession.sendConv: ALL: FUNCTION: Invoking
clog: HeliosSession.initConvOS: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.write: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.write: FINEST: GENERAL: exlen:16
clog: ConvAtOutputStream.write: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.write: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.write: FINEST: GENERAL: exlen:8
clog: ConvAtOutputStream.write: ALL: FUNCTION: Exiting
clog: HeliosSession.sendCompress: ALL: FUNCTION: Exiting
clog: HeliosSession.sendE: ALL: FUNCTION: Exiting
clog: HeliosSession.sendCompress: ALL: FUNCTION: Entering
clog: HeliosSession.sendCompress: FINEST: GENERAL: Sending byte array of 60 bytes
clog: HeliosSession.sendConv: ALL: FUNCTION: Invoking
clog: ConvAtOutputStream.write: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.write: FINEST: GENERAL: exlen:6
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.write: ALL: FUNCTION: Exiting
clog: HeliosSession.sendConv: ALL: FUNCTION: Invoking
clog: ConvAtOutputStream.flush: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.flush: FINEST: GENERAL: tail = 6
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.flush: FINEST: GENERAL: Sent to pipe 16 bytes
clog: HeliosSession.sendCompress: ALL: FUNCTION: Exiting
clog: Client.flush: ALL: FUNCTION: Entering
clog: Client.flush: ALL: RESUME: Data length: 86
clog: Client.flush: ALL: FUNCTION: Exiting
clog: HeliosSession.startSession: FINEST: GENERAL: disconnecting jdbc
clog: JupConnection.destroy: ALL: FUNCTION: Entering
clog: JupConnection.destroy: ALL: FUNCTION: Exiting
clog: HeliosSession.startSession: ALL: FUNCTION: Exiting
clog: Client.startSync: MANDATORY: ALL:
Exception: java.sql.SQLException: ORA-02289: Sequence ist nicht vorhanden.
ORA-02289: Sequence ist nicht vorhanden.
clog: HeliosSession.getSessionType: ALL: FUNCTION: Invoking
clog: Server.newConnection (): ALL: FUNCTION: Invoking

Check your err.log after you create the users to see if there is any issues.
I have had various issues with users Data Subsetting not being set. I find this happens when there are many blocking locks and users are being drop, created, password change, etc. Blocking locks are part of the nature of the application, the only way to really combat that is to do some performance tuning on the MGP and the SYNC.
Here is how I create my user:
        try {
            rm.createUser(USERNAME, PASSWORD, DISPLAY_NAME, "U");
            rm.setUserAccess("/app", USERNAME, true);
            rm.setTemplateVariable("/app", USERNAME, "USER_ID", PARAMETER);
            rm.commitTransaction();
        } catch (ResException res) {
            rm.rollbackTransaction();
            res.printStackTrace();
        }

Sequence does not keep up with playhead on timeline. Shouldn't it?

Similar Messages

Maybe you are looking for