T400 does not start up with a battery and AC, but starts up with only AC.
I bought T400, 7417-CTO in Jan 2010. My T400 does not start up with a battery and AC power. I tried to start with only AC power after pulling out the battery, it worked fine. Even when I inserted the battery in T400, which was running perfectly with AC only, T400 seems to lose the power - more strictly speaking, it kept stoping and re-running several times, and finally it dead.
a few possibilities
1) a battery is dead - but it does not explain the failure with both AC and battery
2) some hibernation issue - I plugged in and out the DIMM, and clock battery. I tried to keep pushing the power button trick, but it didn't work
3) Mother board failure??
I really appreciate if you give me some advice on it.
Wanyong
Thanks for all your kind and helpful comments.
Unfortunately, I don't have any friends who have Lenovo - or I don't have many friends here since I moved in the last summer. ;-)
After purchasing a new battery, I will update it. Hope that this thread helps someone who had/will have same prob. as mine.
-WS
Similar Messages
-
I have taken out a new contract with a Samsung S4 as the mobile device. It has a new sim card I got with the contract and new number. However, when friends with iPhones message me it is sending from their phone as iMessage meaning I am not receiving texts from them. Is this a fault on their side or mine? How do I fix the problem so I am receiving messages from them instead of it sending as iMessage and not received on my phone. Please help
Read here regarding what you should have done & how to fix:
http://support.apple.com/kb/HT5661 -
Last night my ipod touch(with iOS 5 beta 4) tried to reboot itself and is just not starting. it does not allow me to do anything and does not start till it's battery is exhausted. iTunes is not recognizing it. pls hlp............!!!!!!!!!!
Please post in the developer forum using your account credentials.
Stedman -
A 305- S6825 will not start with the battery and charger. There's no light, no noise on fan or HDD
PC will not start with the battery and charger. There's no light, no noise on fan, hard drive and CD writer. The hard drive, fan and charger are new. But I was havingproblems and sudden blackouts System 32. Try several times to install theoperating system but the pc turned off suddenly and restarted until I stop working completely. Now it does nothing and no light. I hope it can help me I need torespect and love very much this notebook.
Thanks in advance
Jose Echevarria
[email protected]Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections. If it still won't start, remove the battery and start with just the AC power. Next try without the AC power and just the battery.
- Peter -
My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?Reset Firefox to its default state
If you're having major problems which you can't resolve, start fresh with only your essential information.
Troubleshooting Information
This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
Application Basics
Name Firefox
Version 33.0.1
Update History
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Profile Folder
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Multiprocess Windows 0/1
Crash Reports for the Last 3 Days
Report ID Submitted
All Crash Reports
Extensions
Name Version Enabled ID
Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Adblock Plus Pop-up Addon 0.9.2 true [email protected]
Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
Graphics
Adapter Description Intel(R) HD Graphics
Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM Unknown
Device ID 0x0046
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
Driver Date 1-30-2013
Driver Version 8.15.10.2993
GPU #2 Active false
GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
Vendor ID 0x8086
WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote true
AzureCanvasBackend direct2d
AzureContentBackend direct2d
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
Important Modified Preferences
Name Value accessibility.blockautorefresh true
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.frecency_experiment 1
browser.places.smartBookmarksVersion 7
browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
browser.startup.homepage www.google.com
browser.startup.homepage_override.buildID 20141023194920
browser.startup.homepage_override.mstone 33.0.1
browser.tabs.loadInBackground false
dom.mozApps.used true
extensions.lastAppVersion 33.0.1
font.internaluseonly.changed true
gfx.direct3d.last_used_feature_level_idx 1
keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
media.gmp-gmpopenh264.lastUpdate 1413750166
media.gmp-gmpopenh264.version 1.1
media.gmp-manager.lastCheck 1414375733
network.cookie.prefsMigrated true
places.database.lastMaintenance 1414404204
places.history.expiration.transient_current_max_pages 102059
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
plugin.state.npmedia 0
plugin.state.nptimegrid 1
print.printer_Canon_MG2100_series_Printer.print_bgcolor false
print.printer_Canon_MG2100_series_Printer.print_bgimages false
print.printer_Canon_MG2100_series_Printer.print_colorspace
print.printer_Canon_MG2100_series_Printer.print_command
print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
print.printer_Canon_MG2100_series_Printer.print_edge_left 0
print.printer_Canon_MG2100_series_Printer.print_edge_right 0
print.printer_Canon_MG2100_series_Printer.print_edge_top 0
print.printer_Canon_MG2100_series_Printer.print_evenpages true
print.printer_Canon_MG2100_series_Printer.print_footercenter
print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
print.printer_Canon_MG2100_series_Printer.print_footerright &D
print.printer_Canon_MG2100_series_Printer.print_headercenter
print.printer_Canon_MG2100_series_Printer.print_headerleft &T
print.printer_Canon_MG2100_series_Printer.print_headerright &U
print.printer_Canon_MG2100_series_Printer.print_in_color true
print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
print.printer_Canon_MG2100_series_Printer.print_oddpages true
print.printer_Canon_MG2100_series_Printer.print_orientation 0
print.printer_Canon_MG2100_series_Printer.print_page_delay 50
print.printer_Canon_MG2100_series_Printer.print_paper_data 1
print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
print.printer_Canon_MG2100_series_Printer.print_paper_name
print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
print.printer_Canon_MG2100_series_Printer.print_plex_name
print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
print.printer_Canon_MG2100_series_Printer.print_resolution_name
print.printer_Canon_MG2100_series_Printer.print_reversed false
print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
print.printer_Canon_MG2100_series_Printer.print_to_file false
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 2
storage.vacuum.last.index 1
storage.vacuum.last.places.sqlite 1412311800
Important Locked Preferences
Name Value
JavaScript
Incremental GC true
Accessibility
Activated false
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.7 4.10.7
NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSUTIL 3.17.1 3.17.1
Experimental Features
Name ID Description Active End Date Homepage -
Question
When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https: Is there a solution?Try some basic troubleshooting.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem. -
My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.
Try disconnecting any external devices, especially hard drives
and try rebooting.
If that doesn't help, then :
If you are running Lion, boot to the Recovery HD and run a
Repair Disk on the OSX partition.
If Snow Leopard, boot to the installl DVD and run Repair Disk.
Also, you may want to bookmark this:
http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
for future reference. It is a pretty good explanation of the
Mac boot process and how to identify where problems may be. -
T400 does NOT wake up after going to sleep
T400 does not wake up after going into sleep. It goes to sleep ok but everytime wheni try to wake it, it restart the whole system instead of waking up.
I have checked the BIOS Security setting and it already set on Active. All drivers are upto date.
Please help!!
Message Edited by farooqjilani on 03-09-2009 08:23 AMI have a similar issue with a T400 (xp sp2).
suddenly, it won´t come back from sleep. i have to press & hold the power button to turn off the computer, and then press again to turn it on from scratch. -
Flash Player 10 does not work in IE or Firefox. What could it conflict with?
I'm using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash. Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything. I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
Yup. Nothing. When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option. I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
Flash 10i.ocx (10.1.82.76)
FlashUtil10i_ActiveX (10.1.82.76)
FlashUntil10i_Plugin (10.1.82.76)
genuinst (6.0.2800.1531)
FlashUtil10i_ActiveX.dll (10.1.82.76)
NPSWF32.dll (10.1.82.76)
KB931433
FlashInstall
Install
Flashplayer.xpt
When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled. I even enabled the other Adobe add-ons for Acrobat and such just to be sure. Firefox shows Shockwave Flash and Shockwave for Director both to be enabled. The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website. I have DirectX 9.0c installed and everything else works fine. I can play audio and video elsewhere with no problems. It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
Any ideas?Well, great. I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it. No such luck. The video still plays, but no sound.
All the sound settings are working with everything else from games to media players. I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
In the Flash folder, I now have:
Flash10l.ocx (10.1.102.64)
Flash Util10l_ActiveX (10.1.102.64)
FlashUtil10l_Plugin (10.1.102.64)
Genuinst (6.0.2800.1531)
FlashUtil10l_ActiveX.dll (10.1.102.64)
NPSWF32.dll (10.1.102.64)
And the setup and text files that went with 'em.
I've also done a system restart since then and zip.
I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go. The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
Now what? I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
Date: Sun, 14 Nov 2010 17:37:07 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
> -
Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
Please help me.I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
You asked what I meant about saving the installer on your PC.
When you go to the iTunes download page:
http://www.apple.com/itunes/download/
And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts. -
My new iPhone 5 email is synched with my home office computer Outlook email using a POP account, but deleting an email on my computer does not delete the email on my phone and vice versa. Is there any way to get a true synch?.
POP does not support synchronization between the server and clients. You will need to use IMAP or Exchange Active Sync if your email provider supports it.
-
When I use my external monitor, I cannot get it to work after awakening my laptop using any key. My monitor won't light up although laptop keyboard is backlit showing that it has come out of sleep mode. Why does the monitor not get the signal from the laptop?
I still cannot figure out why it doesn't always work. All parameters were met and my bluetooth keyboard is set correctly to wake the computer. My keyboard becomes backlit, but my LG monitor does not pick up a video signal and is black and my laptop monitor is off. The only way I can get out is to hold on button on laptop until it shuts down and I can start up again. This happens on an intermittent basis. Sometimes it works and other times I get black screens. I need to know if I can use command F1 to get the laptop to detect the display or is their another key combination to send the signal to the external monitor when I can't see anything because I hate to do a hard shut down to get out of this mode! Please advise!
-
I am not very tech savvy, installed Firefox and it won't communicate with my Incredimail. If I click on a link in my email it does nothing. ie: if i click on the pay now button on ebay or paypal it goes nowhere. also is there a way to transfer all my favorites/bookmarks from IE to firefox. I've heard Firefox is so much better than IE but I am getting frustrated (probably out of my own ignorance of the program) and ready to go back to IE. Please help! Thanks. Jeanne
I cannot help with Incredimail, but I do know how to transfer bookmarks.
One can use File > Import from the menu or export favourites from IE as .html and then import the file into Firefox from the "Show all bookmarks" window. To get the menu to show up, press Alt. Firefox should have offerecd to import several items from IE when you first set it up. Did it not do that? -
Getting this error message as of this morning: The version of iOS on “iPad” does not match any of the versions of iOS supported for development with this installation of the iOS SDK. Please restore the device to a version of the OS listed below, or update to the latest version of the iOS SDK. I've downloaded the latest SDK and gone through the usual turn off and turn on again for iPad and computer, removed and reinstalled the iPad from Organizer and have no idea how to make apps build now. I was prompted to update the iphone too but there's no way I'm updating it if this issue can't be resolved.
Okay these are the steps I took to solve the problem - they may not be the right ones for you but they've solved the problem and saved time hunting for some other solution. Firstly I changed my MAC system to Lion with the £20 download, then I deleted the old Xcode and installed the new version that is app based and doesn't support Snow Leopard, then all was well. I can now update my xcode via the app which is quicker and more logical and can update my iPhone rather than chug along avoiding updates as I need to update my existing apps on the app store and upload a new one.
-
Hi. I'm a Mac user. After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." What should I do?
Did you purchase the software in another country than where you live?
Maybe you are looking for
-
Multiple emails under one Apple ID - how to separate iMessages?
We are trying to set up one idevice to use a separate email address under a master Apple ID. It is for a child so they should not have access to all account settings and whatnot. Everything works fine except one element. On the device that gets all
-
CALCULATION OF OCTROI IN TAX INJ
Dear Guru, In the pricing procedure We are following percentage base for the calculation of octroi.The octroi is calculated on the base value excise dutysales tax I give the basic price and the tax code in the PO and the octroi should be directly cal
-
Creating a PDF document with visible bookmarks
Hi. I'm using VB to create a PDF document with bookmarks. I have no problem with this part. What I want to do, though, is to program the document so that the bookmarks pane is visible when I open the document. Any ideas? All Best, Ethan
-
Hi Experts, I have configure the Logged infotype tables(V_T585A/B/C) and getting the output. My requirement is to display the additional column for subtype text. After running the report RPUAUD00 we get the Logged changes in Infotype data and if we c
-
can type Chinese email but cannot display Chinese email when it receive. any hints to fix it? thx!