Sequence not closed at store close

Using the DPL with BDB v4.7.25 (Java API), I have observed that closing an EntityStore do not close the Sequence objects attached to it.
EntityStore.close() closes the sequence database, but not the Sequence itself. Open through getSequence(String).
The bad side effect for me is that the mutex used by this sequence is never released.
This can also be seen directly in the source file.
The issue is still valid in BDB v4.8.24.
As a work around, I close all sequences open so far by the store, just before closing it finally. The mutex(es) are properly released.
Thanks for your feedback.

Fixed in 4.8.26

Similar Messages

When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on. When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back. I never noticed this with os leopard, Just after i installed os snow leopard. All software is up to date only I think, thanks to apple they droped support for logic express. Thanks for any suggestions.

Does toggling CC off & back on bring it back?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Firefox.exe*32 not closing down when i sutdown all open windows so I have to close it through taskmanager

firefox.exe*32 not closing down when i sutdown all open windows so I have to close it through taskmanager so I can then start a new session.

See:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs

JMS session is not closed even after calling close()

Hi All,
I am using JMS to receive and publish topics for a process,in my java code i
am creating new JMS Session on demand(ie., whenever a new topic is
received) after processing the topic i am closing the session with close(),but
still the session is not closed.In a period of time more sessions are created
and FD leaks occurs which stops the process functionality.
Later i moved the on demand session code to a static block, its working fine
and no FD leak occurs.
Is this a known behavior or any java bug is there to point this issue,please
help me regarding this.
Thanks,
Ants Balajei

You should try avoid creating sessions on demand but cache/pool them...
http://activemq.apache.org/how-do-i-use-jms-efficiently.html
James
http://www.iona.com/
Open Source the Enterprise Way

I keep getting a message that Firefox is open and not responding. That I have to close the Firefox application or restart my computer. A real pain. Why is the firefox application not closing in English

I keep getting a message that Firefox is open and not responding. That I have to close the Firefox application or restart my computer. A real pain. Why is the firefox application not closing.

Sounds like Firefox is "hanging at exit". That problem is frequently caused by an Extension or a Plugin. Read all of the following articles.<br /><br />
NOTE: Establish a habit of exiting/closing Firefox with Firefox button > Exit or File > Exit to allow an orderly shutdown of Firefox and closing of all of the files that Firefox has open.
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
#Why Firefox may hang:
#*[http://support.mozilla.org/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.org/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably an Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Avast for mac will not install unless I close safari and mail but both are closed. I turned off computer and started again but same message appears.

avast antivirus for mac will not install unless I close safari and mail which are both off. I have shut down my imac and started again but same message when I tired to install. Help please.

jejerry wrote:
do you use any antivirus software ...
In General 3rd Party AV Software is Not Required as Mac OS X tends to look after itself.
Read Here > https://discussions.apple.com/thread/4545776?tstart=0
See Here > Antivirus Discussion

Can not open app store in iPad 3

why I can not open app store in iPad 3

IF you get app update notifications, are you able to use the App Store from the Updates Tab? Try closing the App Store and reset your iPad. You will not lose any data.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

[Forum FAQ] Go to Start Screen/Desktop when closing Windows Store App

After install Windows 8.1 Update 1, you will notice these things set by default even on touchscreen laptops and desktops:
Windows 8.1 now boots directly to the desktop.
Closing Windows Store Apps and go to desktop instead of Start Screen.
Besides option “When I sign in or close all apps on a screen, go to the desktop instead of Start” since Windows 8, another new option in Taskbar Properties “Show Windows Store app on taskbar” is used to control closing app behavior.
Features of "Show Windows Store app on taskbar"
When the setting is checked, all of the Windows Store apps that are currently running will display on taskbar. You can easily switch between Windows Store apps and your desktop and its applications through the taskbar. For mouse users,
you can also access the taskbar within a Windows Store app. Just move the mouse cursor to the button of the screen, the taskbar pops up.
When the setting is unchecked,
Windows Store apps have no minimize button, only Close button
Windows Store apps that are open are not visible on Taskbar
Windows Store apps can still be pinned to the taskbar
How do these two options work for closing app behavior?
Modern app and Taskbar setting
OFF
ON
Boot to desktop setting
OFF
Close goes to Start
Close reveals the app that was previously used, and eventually dead ends at the Desktop
ON
Close goes to desktop
Close reveals the app that was previously used, and eventually dead ends at the Desktop
Know why “When I sign in or close all apps on a screen, go to the desktop instead of Start” does not work when “Show Windows Store app on taskbar” is checked on
As MironV mentioned in the
thread, Windows 8.1 Update is designed to introduce a number of changes for mouse and keyboard users that would help them use and switch between Windows Store apps alongside their familiar desktop applications. A lot of these changes only made sense when
combined together, so they are toggled by one setting, which is “Show Windows Store apps on the taskbar.” This is usually enabled together with the first setting as a complimentary set of improvements for desktop users. When the setting is enabled, Windows
Store apps are intended to feel more like regular maximized applications living on the desktop, though they are full screen only. For example, when you launch apps from Start, they appear on the taskbar until they are closed. You can also minimize them or
switch between them by invoking the taskbar.
Please understand that unchecking the “When I sign in or close all apps on a screen, go to the desktop instead of Start" setting has no effect on close and minimize behavior when the “Show Windows Store apps on the taskbar” setting is checked, since
they are controlling two independent things. If you tend to use only one Windows Store app at a given time, it may seem like we’re not respecting the setting by going to the desktop.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

I don't know if I'm the only one, but on my desktop (using mouse and keyboard only) I like to have my Start screen as my main screen. To ensure this I made sure to uncheck the "When I sign in or close all apps on a screen, go to the desktop" box and
check the "Show Start on the display I'm using when I press the Windows Logo key" box. I also really like having the task bar appear at the bottom even when I'm using a modern app. Based on the settings I've chosen (i.e., boxes I've checked or not checked),
I would expect to be taken back to the start screen and not the desktop whenever I close an app. From what I've read from your response and from others in this thread, in order to accomplish this function (i.e., closing an app and going directly to the
start screen) I need to uncheck the "Show Windows Store apps on the taskbar" setting. By doing this I get the functionality I was looking for when the apps are closed and I get sent to the start screen. However, I am now not able to see the taskbar
when I'm in a modern app or when I'm on the start screen. This seems counterintuitive/confusing as many have mentioned. Not to mention it creates an additional step for users to get back to the Start screen.
All I want to do is (1) use my start screen as my main screen, (2) see the taskbar when running whatever app I'm using (e.g., modern), and (3) go back to my start screen (and not the desktop) when I close an app. It would only make sense that I should
get these results if I leave the "Show Windows Store apps on the taskbar" box checked and the "When I sign in or close all apps on a screen, go to the desktop instead of Start" box unchecked; but unfortunately this is NOT the case. I really hope that
an update fixing this is coming sooner rather than later because this is really annoying.

TS1702 iPad iTunes and app store closes

I have a iPad 1 and iTunes and app store closes after 5 min of use. Have closed all apps. Powered off and performed reset updates are current . Need help please

Hey Carly!
It sounds like you are experiencing an issue with connecting to the iTunes Store. We have an article that addresses this issue, and it can be found here:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Specifically, these are the steps for troubleshooting this issue on your iPad:
Troubleshooting on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to 3G, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
Try resetting (turning off and then on again) your Wi-Fi router
If the issue persists, see troubleshooting Wi-Fi networks and connections.
Note: All iPhone, and iPod touch models support 802.11b/g Wi-Fi networks. In addition, iPhone 4, and iPod touch (4th generation) support 802.11n Wi-Fi networks (2.4 GHz only).
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

SAP Production Order not closing

Hi there,
I am running the COHV with Complete parameter in the background, and it does pick up several TECO orders from the past, like say from 2009 which are not closed but it does not process them to CLSD status.
I am seeing some entries in COHV, CO1P, COFC transactions - I picked a few randomly to check.
The order qty is not always equal to the delivered qty - Again a random test
The consumption qty on the components is not always equal to the required qty, which leaves reservation open - random check
Is all the above causing my order not to close ? where do I see the error log, when I try to close the order. I wrote the above issues based on my random check.
Thank you

Hi SAP Process,
When you run COHV to close the orders, you can see the log with the list of orders that have not been closed.
To see in detail what has happened you will need to check order by order.
Other option will we to evaluate each situation separatelly. You can check COGI, CO1P, see open reservations, check if you have TR or TO if you use WM, etc.. Once each situation is cleaned, you will be able to closed most of your production orders. It is quite common to create a custom report to make all these checks (COGI, TR/TOs, etc) and closed the orders.
Kind Regards,
Mariano

Hyperlinks not closing out in RH

Here's another odd behavior:
When I bring my FM book into RH, my hyperlinks are not closed
out in the converted content in RH. In FM, the hyperlinks are
correctly inserted using the gotolink and newlink Hypertext
markers. Yet in RH, the rest of the sentence in which the hyperlink
appears is also erroneously tagged as part of the hyperlink.
Is this is a bug? Has anyone else seen this behavior and if
so, how did you fix it?

Hello Michael,
This is not an issue, you'd always get the hyperlinks
appearing corrcetly without any tagging in the Design view of RH.
Just try to close and reopen the topic in the Design view or try to
view it in preview - it shoudl appear correctly.
Regards,
Pooja

I have a problem that I can not load or even close the download in iTunes, it turns out I have hanging in the mode, and because of that I can't download from AppStore, because it turns out that the other programs I have on standby. What do I do? Thank you

I have a problem that I can not load or even close the download in iTunes, it turns out I have hanging in the mode, and because of that I can't download from AppStore, because it turns out that the other programs I have on standby. What do I do? Thank you.

If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
 Cheers, Tom

AS Java sessions are not closed until they time out

Hello Experts,
we have a SAP PI system to integrate SAP R/3 with external applications and recently we are facing a problem with inactive sessions. There's a new application we are setting up that consumes a webservice published by this SAP PI system. The scenario is SOAP --> PI --> PROXY. What we have noticed is that when the application sends loads of requests sometimes the system fails. This is because we are reaching the maximum number of open sessions in AS Java (1000). Investigating a bit more we found out that the sessions are not "closed" once the communication between the application and SAP PI has finished. Those sessions are open until they are automatically timed-out by the system after 1800 sec.
We have found the notes below in SAPNet:
Note 1363751 - ICM: Java Web sessions are not terminated
Note 1307940 - New HTTP session opened for every web service call
However, none of them are applicable to our system because it is more updated:
SAP PI 7.1 EHP1 SP002
Kernel Patch Level: 87
We have tried to close connections from the application that consumes the webservice but with no success. The sessions remain in the server until they are timed-out. Could you please tell us if this is the normal behavior of an AS Java system? Is this the way it should work? If so, can you tell us how to decrease this timeout so the inactive sessions are cleaned faster? We tried to find it but we didn't manage. Is there any way to close the session once the communication has finished?
Thank you in advance.
Roger Allué i Vall

Hi Roger,
You can do the following things to help solving your issue:
1. Decrease session timeout default value of the web container: Use the NetWeaver Administrator
Open Application Modules plugin within NWA
Configuration Management -> Infrastructure -> Application Modules
Set the desired timeout web module you are using, in minutes.
The default value 0 in the NWA means that the value is not modified
and the default value of 30 minutes timeout will be used.
2. Increase the max. no. of Sessions in Configtool
The max. number of Sessions can be set in Configtool in the Expert
mode. There is no limitation for the parameter.
Thanks,
Anderson

Outlook 2013 are not opening and showing pst files are not closed properly

Hi
Outlook 2007 has stopped working and showing close the program. Again,we re-started then outlook 2007 and it has opened and taken the backup of pst files in a separate hard drive.
The pst file was repaired in scanpst.exe and again i have tried to put the pst file back in outlook 2007.It was hanging and suddenly i have uninstalled 2007 and started installing outlook 2013.
2013 applications like word,excel,power point are opening and outlook 2013 are not able to open and showing pst files were not closed properly.
Again i have un-installed and re-installed the outlook 2013.still we are not able to open the outlook.
Need your support at the earliest to fix the issue.
Thanks

Hi,
What's the .pst file used for? Archive? Or you set up a POP3 account and want to import the emails from the .pst file?
Another question, you mentioned you installed Outlook 2013 and it didn't open either. Was this from the beginning right after you installed Outlook 2013, or after you did something such as create a new Profile, set up a new account and tried to import the
.pst file?
Kindly answer my questions so I can understand the situation better.
I've seen some of this issue caused by the anti-malware software, check your anti-malware software to see if it's trying to interfere with Outlook - things like real time email checking can sometimes cause these kinds of problems. To troubleshoot, we can
simply disable the anti-malware software temporarily to see the result.
Regards,
Melon Chen
TechNet Community Support

2nd Document window not closing

I have 2 Document windows,
- win1 is parent window.
- win2 is a small window with 3 display fields
and 2 buttons OK & Cancel.
- other setting for 'win2' is
Modal = 'YES'
Close Allowed = 'YES'
i have problem with Cancel button code, i am giving
if :SYSTEM.EVENT_WINDOW = 'WIN2' then
GO_ITEM('CTRL.FLD5');
HIDE_Window('WIN2');
end if;
The WIN2 is not closing,
i am calling this 'WIN2' from a WVI trigger of a field on parent window 'win1'
by issuing SHow_WINDOW('win2') command.
but it flashes error FRM-40737: illegal restricted Procedure SET_WINDOW_PROPERTY in WVI trigger.
Any one please suggest. TY.

hi Sarah,
i dont to know to which item's WVI should i atttach this code.
Since the window Closed_Allowed property is set "yes".
the same code given at Form-level When-Widow-Closed, works well, closes the window in 1 click.
but i dont know the same code given for Cancel button, does not close 'win2',
One more point, first time when win2 is shown, that time, out of the [x] button on the status bar &
Cancel button on win2, if i use [x] button first, then 'win2' closes and cursor is back in CTRL.FLD5 on 'win1', fair enough.
then afterwards from CTRL.FLD5 when 'win2' is called again then the Cancel button code works fine just like the [x] button.
but the question is why not first time, if i choose Cancel button first. why it is required [x] button to be used first.
So the problems are;
- FRM-40737 is thrown whenever win2 in invoked from CTRL.FLD5
- 'WIN2' does not close by pressing Cancel button, when displayed first time.

Sequence not closed at store close

Similar Messages

Maybe you are looking for