Serialized Assembly has different MVID from the original assembly

I need to create serialized assembly for my DLL. At first I did it by turning on 'Generate serialization Assembly' option in the Project Properties in Visual Studio. I checked the resulted serialized assembly's MVID using ILDASM and the MVID is different
than the original assembly.
I then resort to create the serialized assembly using sgen.exe but again the MVID of the serialized assembly is different than the original assembly.
I do not call/do anything to the original assembly that would cause it to be recompiled, so I don't understand why the MVID of the serialized assembly is different.

Hello,
Did you update the .NET Framework, for example, install a service pack for .NET? If so, it will cause assemblies recompiled and update the MVID.
You can refer to the following KB article about how to troubleshooting this issue:
http://support.microsoft.com/kb/949080/en-us
Regards,
Fanny Liu
If you have any feedback on our support, please click here. 
Fanny Liu
TechNet Community Support

Similar Messages

  • Bought my iMac through Apple Education Pricing. Does this mean the warranty has been extended from the original one year to three years?

    Bought my iMac through Apple Education Pricing. Does this mean the warranty has been extended from the original one year to three years?

    No. If you want an extended warranty you still must purchase it. It is not included with education pricing.

  • Restoring Tablespace in different location from the original location

    Dear Experts
    We are doing an Restoing of production database in to an another server. where the production database runs on Windows and the sap directories has been stored in 6 drives but in the second servder which has only 3 drives but high capacity. we want to restore the files from the production database (hich will have the drive reference ) to the new server ( which has 3 drives only) by referring only the sap directories so that it is safe to pull the data
    in brrestore how the comman / syntax should be?
    could any one guide us
    regards
    bala

    Hi,
    You will have to follow a redirected restore procedure for oracle rather than a normal restore.
    For this you will have to do the following:
    1. Take a full offline backup or an online consistent backup of your production database.
    2. Backup control file to trace on your production server.
    3. Display the back<SID>.log summary log in production and identify the u2018affu2019 or 'anf' file that was created for the production backup.
    4. Copy the back<SID>.log and .aff/.anf files to the sapbackup directory of quality.
    5. Now use the brrestore redirected option:
    brrestore -m all,<source drive 1>=<target drive 1>,<source drive 2>= <target drive 2>  -b <file-id>.aff
    This performs a redirection of the file during brrestore operation.
    6. Manipulate the control file trace you created above and change the drives accordingly. Rename it to control.sql
    7. Then do the following:
    >sqlplus /nolog
    >connect / as sysdba
    >@c:\control.sql
    >shutdown immediate
    >startup mount
    >recover database using backup controlfile until cancel;
    The recover part is only required if you have used a online backup.
    Hope this helps.
    Regards, Dibya

  • I can't remove a bookmark of a form that has been removed from the original database it was on.

    Local county website removed a form students use and placed it in another location of its website. I had the form bookmarked in its old location. Now I can't remove the bookmark for the form at its old location. Also, I'm not sure if the old/new location has anything to do with my inability to remove or delete that bookmark.

    Would you check the Bookmarks sidebar, and look for there in your groupings, and also do a search on it there. From the location bar use and internal search by not hitting "Enter" and include a space delimited asterisk ("*") to restrict to bookmarks.
    The Bookmarks Menu (menu) often lags behind, especially when you have lots of changes.
    I don't use the Bookmarks *menu* to look for bookmarks. I like the organization and faster scrolling of the bookmarks sidebar.
    Restarting Firefox will probably fix the Bookmarks *menu*
    If you want to play with it you can try these, but I don't make a lot of bookmark changes in a session that it would bother me that much.
    * creating a bookmarks backup and then restore it via Bookmarks Library List ("Ctrl+Shift+B") > Import and Backup > Backup --- then restore that backup.
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • My scanned document has different images than the original

    Scanning a document as PDF.  Some of the letters on the original do not appear on the scanned version

    What options do you use?

  • I have made a burn folder with photos exported from I-photo.  It now shows in information, that the date is created and modified is different from the original digitized date.  How can I get the original date to show in the info from Finder?

    I have made a burn folder with photos exported from I-photo.  It now shows in information, that the date  created and modified is different from the original digitized date.  How can I get the original date to show in the info from Finder?

    The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
    Regards
    TD

  • HT204053 I have one apple ID that my entire family has been using.  How do I create new apple ID's for each of us and move the appropriate content to each new ID from the original apple ID now that we all have our own devices?

    I have been using one apple ID for 4 family members.  Up until now it hasn't been a problem but now that we all have our own devices how do I create new apple ID's for each of us and them move the approprioate things from the original apple ID account to the new ones for each of us?

    stuartx4 wrote:
    Thanks Csound1, wish I have seperated everything from the beginning but when your kids are little and start buying music etc it just didn't seem like an issue.
    That has a familiar ring to it

  • Text has different look from one text box to the next on same page issue

    Hi,
    I'm in the process of creating a new site that contains quite a bit of text from a book I wrote. I've taken the text from the original source, put it into text editor and made it into plain text. From there, I've pasted it into the iWeb text boxes and adjusted the text look (font is Arial, justified alignment). When viewing it in IE (probably others?), one block of text looks different than others.
    http://www.goaheadtakethewheel.com/Test13.html
    I've verified that the font size and other options are all the same on iWeb. For the life of me I can't seem to figure this out. The only way I can think of possibly resolving this is to re-type each section from scratch. Given that there are about 75 wordy pages...UGGGG!
    Any suggestions or ideas? Thanks for your time and help!!
    Dave Gran

    You could first try deleting your iweb preference file <com.apple.iWeb.plist> it is in your Library/preference folder.
    To create a new domain file, first save your current file in a safe place, such as an external hard drive, burn to a CD, etc. By default it is in your User/Library/Application Support/iWeb folder. All your work is in this file, keep it safely backed up, if you lose this file you lose all your work, you can't restore from the published web site. When you get this file saved safely off your computer and open iWeb it will create a new empty domain. Once you have the new file created you can bring the old file back to the computer. You can put them side by side in any folder (give them different names so one won't replace the other) At this point you can double click the domain file itself to open iWeb. You could try cut and paste between the two domains. I'm not sure this will solve the problem but you could try it on one page, publish to a local folder and see if it helps. Sounds like a lot of work.
    Which ever domain file was last used is the one iWeb will subsequently open unless you double click the actual domain file to open iWeb. Be careful and good luck.
    David

  • Why does a new desktop creation unexpectedly initiate with a background differing from the originating desktop? How can I control or eliminate this behavior?

    Why does a new desktop creation unexpectedly initiate with a background differing from the originating desktop? How can I control or eliminate this behavior?

    CT, I suspect that I either mistated the question or don't understand how to set the default back ground.  In any case, with the background that I have set in system settings, and this is the background to which my sessions consistantly boot, new desktops come up for the second or up to the third background with this initially set background. Then in the third or fourth desktop creation (I seldom go beyond four), the background for the new desktop, is one that I was using one or two months ago...

  • After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

    After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

    I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

  • Help!!! My husband by accident synced his account under my account and has merged all of our contacts.  In the process of fixing the mixup has deleted contacts on both phones.  How do I restore the contact list from the original contact list.

    Help!!! My husband by accident synced his account under my account and has merged all of our contacts.  In the process of fixing the mixup has deleted contacts on both phones.  How do I restore the contact list from the original contact list.

    I hope that you aren't complaining about dropped calls INSIDE your condo because no amount of switching or upgrading devices will solve that.
    VZW will not guarantee service inside of any structure. There are just too many factors. If the problem is inside then you might want to look at one of the following:
    1.) Network Extender (may cause issues for others in a condo or apartment style setting)
    2.) A Google Voice Number (Free with a Gmail email address), downloading Google Hangouts Dialer and forwarding your calls to the GVN so that you can make and receive calls over Wi-Fi.

  • Why the value of 24bit bmp file read by the labview different from the original

    when i use labview to read a bmp file,it looks just fine,but the the pixel value is dfferent from the original,how it changed,can i change it back

    right... Your "result" indicator is an I16, it goes from -32768 to 32767... so that's not enough, before the 2 for loops, just after the Integer to colour value VI  you should place a convertion node to convert to i64 and also change you result display representation to i64.
    See attached VI.
    Hope this helps
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
    Attachments:
    lll.vi ‏42 KB

  • How do I output the smoothest video when changing or mixing frame rates from the original footage?

    I have been experimenting with various Media Encoder settings, and wondered if there was anything else I can try to get the smoothest video output possible, especially when changing frame rate and possibly resolution.  For clarification, let me start from the beginning and explain what I'm doing and what I've tried so far.  I'll try to be as brief as possible, but if I do go into too much detail, I apologize. 
    My original footage is AVCHD 1080p - 60fps.  (my camera only does 60fps...specifically 59.94fps)  We're not talking interlaced video here, I'm staying away from that.  This is definitely full frame, progressive video at 60 frames (not fields) per second.  My output will ultimately be for the web.  I have been keeping my output codec (H.264) and bit-rate (VBR 2-pass, relatively high-bitrate) consistent, and have been trying numerous output options and even sequence settings to see what would yield the best results.  I am using Premiere Pro CS5.5 along with Media Encoder.  Here's what I've done and the results I've observed:
    1.  I created a sequence with 1080p - 59.94fps settings to match my original footage.  I then output both 1080p and 720p versions at 59.94fps, and at 29.97fps.  The 59.94fps output files looked absolutely great, as would be expected.  Extremely smooth.  The 29.97fps output files were generally smooth, but not near as smooth as the 59.94fps.  This is expected since it's half the frame rate as my original footage.  However, my question is this:  What exactly is Media Encoder doing when "down converting" from 60p to 30p?  From a technical stand point, is it dropping every other frame?  I'm just curious to understand exactly what it does.  I tried the Frame Blending option as well, and that only yielded a bit more blur to the images which wasn't desirable for any of the output files. 
    2.  Just to see what would happen, I created a sequence with 1080p - 29.97 settings.  I then output both 1080p and 720p versions at 29.97fps.  The video was much more choppy in these cases, even with Frame Blending on.  Now, I know not matching my sequence settings with my original media isn't ideal, but I again just want to understand why this yields less smooth video than the 29.97fps options above.  Why does cutting the sequence settings frame rate in half from the original, then outputting the same frame rate as the sequence yield video that is not as smooth?
    3.  Next, I wanted to try mixing frame rates to see how Premiere and Media Encoder handled the footage and output files.  Premiere handled it great, no issues there.  However, I had some interesting things happen when I output the files.  Here's what I did:  I created a sequence with 1080p - 59.94fps to match my original footage.  Then I took the same exact footage that was in my sequence, copied it in my project panel and interpreted it at both 23.976 and 29.97 fps, yielding slow motion video.  The slow motion video looked great in Premiere, so I went ahead and just added it to my sequences, along with the original 59.94 footage.  I also created separate sequences for the 29.97 and 23.976 footage respectively, each with matching sequence settings, then added a nested sequence to another original footage sequence (with 59.94fps sequence settings) to see which yielded the best results.  Basically, I'm trying to output 59.94fps that match my original footage, but also throw in some slow motion footage at different framerates.  I'll explain my results in a moment as they are a bit convoluted, however, here is my question:  When mixing frame rates and trying to output the smoothest video, am I going about this the right way?  I would assume you would use your sequence settings that match the original footage (which is what the majority of the footage will be), then bring in a nested sequence for the slow motion (as oppose to just dropping the slow motion video directly into my main sequence), and then output to the same frame rate of the majority of the footage, in this case 59.94fps. Is there a better workflow for this?
    The results to #3 above were as follows.  Initially, it looked like it didn't matter if I nested the slow motion sequence into my main sequence, or simply dropped the actual slow motion video into my original 59.94fps sequence.  It seemed to produce smooth results either way.  Frame Blending blurred the video a bit, but didn't seem to make much difference, and quite honestly I like the footage without Frame Blending in general.  However, when I closed down Premiere, and opened the output files later (opening in Quicktime), the footage looked choppy.  In fact, it would go from choppy to smooth and back, almost like it had an irregular cadence (don't know if I'm using "cadence" in the right context here).  I would then open up Premiere again, import the output footage into my project panel, and play the footage in Premiere, and it would play back smooth again. Is this a Quicktime issue?  I was playing 1080p 59.94fps files when this happened, so maybe it's just because it's a large file.  Doesn't seem to have issues with the 720p files I created.  But it sure threw me off with my testing because I then started second guessing the settings I was using.  My iMac is the latest 2011 model with plenty of RAM, so I wouldn't think it's the computer.  Thoughts?
    4.  Next, I noticed on ALL my output files (again, using the H.264 codec from Media Encoder) that the color of my video seemed to flatten quite a bit.  It seems that the original footage has more contrast and saturation than the output files.  I figured maybe this was just how it was, but when I re-imported the output files back into Premiere, they looked IDENTICAL to the original footage.  And in Media Encoder's Source/Output windows, I don't see any difference there either. Is Quicktime again the culprit here, doing some odd things to the color of my videos?
    5.  Regarding Frame Blending, when is the best situation to enable this option in Media Encoder?  I've read it is when mixing frame rates, but I honestly didn't see too much of a change except for a bit more blur, which I didn't care for.
    6.  Lastly, my conclusion is that 60fps yields the smoothest video, which is an obvious conclusion.  However, I know that 60fps isn't the best or easiet frame rate for web delivery.  It seems 30p is more the standard.  Are there any integrated web players that would play 60fps?  Can you get 60fps video on YouTube/Vimeo?  If yes to any of these questions, can they do 720p and 1080p at 60fps? 
    Those are all my questions.  I hope I am clear enough without being overly wordy and hopefully I didn't put too many questions into one post.  Thanks in advance for any insight, I really appreciate it.

    Did you ever figure out which output worked the best? I have the same original footage; trying to determine the best output settings to make a dvd for tv.
    thanks!

  • If I reinstall my FCE 3.5 from the original discs, will I be able to get the updates from Apple?

    System has begun crashing (dropping-windowshade, message to shut down computer) during attempted capture or render.  Hardware has been checked out and is OK.  Other OS functions seem to be working.  I have a bootable clone from the most recent period of good function, and also my original install disc for FCE. 
    If I need to try reinstalling FCE, are the updates still available from Apple?
    If I can't restore FCE 3.5, is there anything I can use with my OS 4.11 MBP that will be able to access my FCE 3.5 project files?  My 3+TB of underwater clips, stored on external drives as QT movies? 
    Any guidance appreciated.  This forum helped me out a lot when I first started - didn't expect the end to come so soon & hope there's a feasible workaround!
    Thanks,
    Sharron S.

    If I reinstall my FCE 3.5 from the original discs, will I be able to get the updates from Apple?
    Yes, via Software Update
    Here is an article on how to Uninstall FCE HD  You could also use  FCS Remover (note there are different versions depending on what version of OS X you have - be sure to select the correct version)
    If I can't restore FCE 3.5, is there anything I can use with my OS 4.11 MBP that will be able to access my FCE 3.5 project files?
    - FCE project files - only usable with FCE or FCP.  Not iMovie or FCP-X
    - All your clips, however, can be used with almost anything including iMovie, FCP, FCP-X, QuickTime, etc.

  • Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation. Any suggestions?

    Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation & pop up message stating web content has failed. Any suggestions?

    Many thanks for your interest, I've downloaded & run the app as suggested, report copies & pasted below.
    Problem description:
    Following upgrade from Snow Leopard to Yosemite 10.10.2 machine is slower & suffers from shut down / reboot and closing web pages due to unexpected error
    EtreCheck version: 2.1.8 (121)
    Report generated 6 February 2015 08:40:29 GMT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro6,2
        1 2.4 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 75
    Video Information: ℹ️
        Intel HD Graphics - VRAM: 288 MB
            Color LCD 1440 x 900
        NVIDIA GeForce GT 330M - VRAM: 256 MB
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:13:14
    Disk Information: ℹ️
        Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (134.68 GB free)
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        BUFFALO HD-PVU2 500.11 GB
            EFI (disk2s1) <not mounted> : 210 MB
            Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 499.76 GB (257.33 GB free)
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. Built-in iSight
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    jp.co.buffalo.driver.turbousbhdd (1.0.0) [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.hp.help.tocgenerator.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        Skype    UNKNOWN  (missing value)
        Safari    Application  (/Applications/Safari.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Android File Transfer Agent    Application  (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
        ConnectService    Application  (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
    Internet Plug-ins: ℹ️
        Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        Silverlight: Version: 4.0.60129.0 [Click for support]
        iPhotoPhotocast: Version: 7.0
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 184.16 GB
        Destinations:
            Time Machine Backups [Local]
            Total size: 499.76 GB
            Total number of backups: 184
            Oldest backup: 2010-12-10 15:37:39 +0000
            Last backup: 2015-02-06 02:49:24 +0000
            Size of backup disk: Too small
                Backup size 499.76 GB < (Disk used 184.16 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             1%    ConnectService
             1%    Skype
             0%    systemstatsd
             0%    launchd
    Top Processes by Memory: ℹ️
        193 MB    Skype
        168 MB    mds_stores
        132 MB    com.apple.WebKit.WebContent
        107 MB    Mail
        99 MB    ocspd
    Virtual Memory Information: ℹ️
        889 MB    Free RAM
        1.99 GB    Active RAM
        455 MB    Inactive RAM
        825 MB    Wired RAM
        1.11 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 6, 2015, 08:27:32 AM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-02-06-082732 _[redacted].crash
        Feb 6, 2015, 08:25:19 AM    Self test - passed
        Feb 5, 2015, 04:37:08 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-163708_[redacted].crash
        Feb 5, 2015, 10:01:02 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-100102_[redacted].crash
        Feb 5, 2015, 12:03:59 AM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-05-000359_[redacted].cpu_resource.diag [Click for details]
        Feb 4, 2015, 11:58:58 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235858_[redacted].cpu_resource.diag [Click for details]
        Feb 4, 2015, 11:54:35 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235435_[redacted].cpu_resource.diag [Click for details]
        Feb 4, 2015, 11:49:03 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-234903_[redacted].cpu_resource.diag [Click for details]
        Feb 4, 2015, 09:40:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-214016_[redacted].crash
        Feb 4, 2015, 09:38:12 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-213812_[redacted].crash
        Feb 4, 2015, 09:27:56 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212756_[redacted].crash
        Feb 4, 2015, 09:25:25 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212525_[redacted].crash
        Feb 4, 2015, 09:20:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212016_[redacted].crash
        Feb 4, 2015, 09:18:10 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211810_[redacted].crash
        Feb 4, 2015, 09:12:54 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211254_[redacted].crash
        Feb 4, 2015, 08:40:48 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-204048_[redacted].crash
        Feb 4, 2015, 08:22:04 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-202204_[redacted].crash
        Feb 4, 2015, 12:11:35 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-001135_[redacted].crash
        Feb 3, 2015, 09:44:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-214433_[redacted].crash
        Feb 3, 2015, 05:40:21 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-03-174021_[redacted].cpu_resource.diag [Click for details]
        Feb 3, 2015, 09:05:45 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-090545_[redacted].crash
        Jan 28, 2015, 06:10:42 PM    /Library/Logs/DiagnosticReports/Kernel_2015-01-28-181042_[redacted].panic [Click for details]
        Jan 21, 2015, 10:51:25 PM    /Library/Logs/DiagnosticReports/Kernel_2015-01-21-225125_[redacted].panic [Click for details]
        Jan 20, 2015, 11:12:47 AM    /Library/Logs/DiagnosticReports/Kernel_2015-01-20-111247_[redacted].panic [Click for details]
        Jan 18, 2015, 09:57:31 AM    /Library/Logs/DiagnosticReports/Kernel_2015-01-18-095731_[redacted].panic [Click for details]
    The only observations are that the backup drive is deemed too small and the quite long list of diagnostic reports dated between  Jan 18, 2015 (which I believe is the day I upgraded to Yosemite) & today the latest Yosemite update was installed on Jan 28, 2015
    Any further assistance will be appreciated

Maybe you are looking for