Serializing Vector fails
Does clear() method of Vector will remove all elemnts or will it leave some empty values ...
I have a very strange problem I have a Vector of objects that I serialize to file it all works OK untill I clear Vector and add new elements then when I try to save to file I get exception... Also I noticed that if I add more elemnts after I emptied it it's ok to save to file otherwise it throughs exception I suspect that clear() doesn't clear vector properly. Any ideas ?
I made some changes to my app recently and now I am not getting this error anymore ... I thought I still have it and that's why I posted it here but I'll keem and eye on it for time been but thank you for your response anyway.
Similar Messages
-
Front-End Service Starup Error: Store procedure to GET progress vector failed.
Hi,
We have a two front end servers in our Lync deployment and I'm getting an interesting error message on one of the servers when the "Lync Server Front-End Service" is starting up. All the services on that server will eventually start but I'm pretty
sure it's affecting users in some way.
Here is the error message in the Event Viewer:
Log Name: Lync Server
Source: LS User Services
Date: 2013-09-17 8:00:32 AM
Event ID: 32194
Task Category: (1006)
Level: Error
Keywords: Classic
User: N/A
Computer: BGC-VAN-LYNC2.domain.ca
Description:
Store procedure to GET progress vector failed.
Execution Error: 0x00000000(ERROR_SUCCESS).
Native Error: 8144.
Error Details: [# [Microsoft][SQL Server Native Client 11.0][SQL Server]Procedure or function SyncReplicationGetProgressVector has too many arguments specified. #].
Cause: This may indicate a problem with connectivity to local database or some unknown product issue.
Resolution:
Ensure that connectivity to local database is proper. If the error persists, please contact product support with server traces.
Event Xml:
<Event xmlns=>
<System>
<Provider Name="LS User Services" />
<EventID Qualifiers="50158">32194</EventID>
<Level>2</Level>
<Task>1006</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-09-17T15:00:32.000000000Z" />
<EventRecordID>16971</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>BGC-VAN-LYNC2.domain.ca</Computer>
<Security />
</System>
<EventData>
<Data>0x00000000(ERROR_SUCCESS)</Data>
<Data>8144</Data>
<Data>[# [Microsoft][SQL Server Native Client 11.0][SQL Server]Procedure or function SyncReplicationGetProgressVector has too many arguments specified. #]</Data>
</EventData>
</Event>
The error happens 15 times every minute, following with this event:
Name: Lync Server
Source: LS User Services
Date: 2013-09-17 8:23:46 AM
Event ID: 32189
Task Category: (1006)
Level: Information
Keywords: Classic
User: N/A
Description:
The following Fabric service for routing groups have been closed:
{F515134C-71B7-52FD-B0C3-6A9DB39CF750}
{8A5D6B36-2A01-53DB-BC4E-3286C05E0836}
{B35AAFC9-F6BF-5FFE-8C31-4AA5C36B2065}
{69223418-78DC-5066-81A8-78E05914EC7B}
{80414C96-1137-5DDC-8387-C3EA7A54B078}
{641E6ABD-B862-55A1-B1B1-C83BC92D2F85}
{1EA68EA4-77F7-5CFC-B781-0093CBC18403}
{2FDE333D-FF7F-5D6A-B85B-93ADC1EAC12A}
{A43BBA3A-8963-51C4-BD7A-19E1EC3DDFDB}
{D3F4532F-61C8-5072-9B3B-3E2CCF15442F}
{4449243E-5E96-56AC-AB6B-C5E785543542}
{58B30261-65B6-5F6A-BC50-60F85782D052}
{DB4B76B0-2510-5BF8-A7B1-8B37BD3AA7B9}
{917CC217-966B-56AC-A912-97BA64BA13EB}
Anyone knows what this is about and how to resolve this?
Thanks,
VH.Hi,
Please try to reset registrar state:
http://tsoorad.blogspot.in/2013/04/lync-2013-ee-pool-wont-start.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support -
Serial records:Lot/Serial validation failed. Please check log for details
Hi,
Received error while performing Quantity On Hand Conversion at MTL_TRANSACTIONS_INTERFACE table,
"Serial records:Lot/Serial validation failed. Please check log for details."
Perfomred following steps,
1) Inserted data at MTL_TRANSACTIONS_INETRFACE table
2) Executed "INV_TXN_MANAGER_PUB.process_Transactions"
Working on Oracle EBS R12..
Inventory Items having above mentioned error are not Lot Controlled and Serial Number generation is set to "At Receipt" . Can anyone tell, what is the cause of the error and where log file is created ?Hi;
What is EBS version? Please see:
ROI Fails with WMSINB-23840:Lot/Serial Validation Failed. Please Check Log for Details [ID 352570.1]
Regard
Helios -
Serial # verification failed. What do I do?
My serial # verification failed, what do I do?
Hi kazmmo44,
Please go through the link below and check.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Regards,
Anand -
List serial port fail in and I have exhausted all combination
Background: If admintool can set serial I could have set it with a click.
The error is "list serial port fail in "
url:geocities.com/worldlinking/index.htm
SO please help and guide.
sunlearner.I have exactly the same problem:
ASUS A7V133 Motherboard, Athlon 1.33Ghz
Solaris 8 Release 10/01.
ALL Recommended and Security patches installed.
Device Config Assistant lists the ports as standard 16550 UARTS, which is correct - ASUS mention nothing 'special' about them.
prtconf shows both ports with asy not attached.
devfsadm does not change that. ports command has no effect.
No /dev/tty/ttya or /dev/tty/ttyb or /dev/term/a etc.
admintool says 'list serial port failed'
ttymon has service entries for ttya and ttyb :
#pmadm -l -s ttya
zsmon ttymon ttya u root /dev/term/a I - /usr/bin/login - 9600 ldterm,ttcompat ttya login: - tvi925 y
Any help greatly appreciated,
--john -
Can't HotSync Centro ("Serial connection failed to initialize")
Every time I start my laptop (Sony VAIO, running Vista) I get the following error message: "Serial connection failed to initialize (The selected port, COM4, is not available at this time. HotSync Manager will open the port when it becomes available.)." I haven't been able to HotSync my Centro for some time now, as the port apparently never does "become available".... Any suggestions? Thanks in advance!
How are you connecting to the computer?
What do you have the HotSync Manager set for? A serial connection? ("Local")?
It should be set to "Local USB".
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
USB Console (Serial) Driver fails to install on Windows 8.1 x64
The USB console cable driver v3.1 will not install on Windows 8.1 x64. Had a similar problem with Windows 7 x64 but this was fixed using Greg's (greggar25) excellent step-by-step procedure (see post: https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing).
I am using the driver from this link: http://software.cisco.com/download/release.html?mdfid=282774228&flowid=7442&softwareid=282855122&release=3.1&relind=AVAILABLE&rellifecycle=&reltype=latest
I followed the same procedures I did for Windows 7 and the install goes without a hitch. Reboot and connect the USB cable, opened Device Manager and now I have a COM Port randomly appearing and disappearing with its number incrementing well above 1,000.
A few times while it appeared for a few seconds, I was able to right click on the properties, update the driver and chose Cisco Serial and it settled down but it did not assign a COM port. Then a few seconds later, it starts the disappearing/reappearing thing again.
Anyone have luck getting this to work with Windows 8.1 x64?Hi,
open Device Manager by simply typing the words on the Windows 8.1 Start Screen. The Search Charm opens and click Device Manager in the displayed list.
In Device Manager a new hardware category, CiscoUsbConsoleWindowsDriver, is displayed. It has two components: the Cisco Bus enumerator and the Cisco USB to Serial adapter. Expanding the Ports hardware category shows a new Cisco Serial port.
or
Look into below
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing
1) Install the usb console driver\windows 64\setup(x64)
2) Follow the wizard and accept the defaults
3) Restart the computer (the installer usually says it needs a restart)
4) After restarting the computer, plug in the usb cable
5) The computer should say installing Device driver software and fail at the Cisco Virtual Comm Port00
6) Click the Windows button, right click computer, manage
7) Under Computer Management, Click Device Management
8) Go to Ports (COM & LPT)
9) You should see the Cisco Virtual Comm Port00 with a Yellow Exclamation point on it
10) Right Click on the Cisco Virtual Comm Port00 and select Properties
11) Click the Driver Tab
12) Click Update Driver
13) Select Browse my computer for driver software
14) Select Let me pick from a list of device drivers on my computer
15) Choose the Cisco Serial Driver
16) Device Driver is installed successfully, take note of the com port it is using and enjoy.
HTH
Sandy -
Serializing Vectors that are in other classes
If I have...
public MyPanel extends Jpanel implements serializable
private vector d;
public MyPanel()
d=new Vector();
public void paint comp(gra g)//etc
Part f=(part)d.get(i);//etc
d.draw(g)
and i OutputStream.write(MyPanel); and InputStream.read(MYpanel) is the vector serialized as well?(Yes the objects "(Part)"within the vector are/is serializable) because when i do:
MyPanel g=(MyPanel)in.readObject();
and then MyFrame.setMyPanel(g);
the vector becomes empty!! and the parts in the vector can no longer be drawn;
help?
devI am not sure what the problem is, but,
- The vector class is Serializable (it isn't the spelling (capital 's') is it??).
OR
- Should it be JPanel g=(MyPanel)in.readObject();
OR
- How do you actually get the vector as there is no accessor method and the vector is private? Could it be you are just not getting the vector because of this.
Please ignore this if I am talking rubbish (it is late). -
Acrobat 9 Pro serial Key fails
Hello all,
I have received 3 different serial keys for Acrobat 9 Pro for my adobe creative suite 3 web premium. All keys say they are invalid. Any ideas? I thought that there was some issue in the registry keys that could be cause this issue, but I have no idea.Ask Adobe.
-
Static fields in serialized Vector objects
just a curious question:
If I have a Vector filled with Objects of all the same type, and the Object contains a static field, and I then Serialize the Vector, will it still give better performance than if the field wasn't static? Thanks,
Maxnevermind - found out the hard way that static fields won't get Serialized
-
Aperture 2 Upgrade Download Version (after crash, old Serial Number fails)
History: Bought Aperture 1.5 on disk, then 2.0 upgrade via dowload (yes, I have the receipt from Apple).
Anyway, my Mac Pro crashed, and I had to do a clean re-install of 10.6.
I found a download at Apple of Aperture 2.1.3 (trial version) but I've tried my 1.5 serial number and my 2.0 serial number, and it says both are invalid!!!!
Any idea who I can get Aperture 2 up and running and get back into my libraries? I don't want to buy Aperture 3.follow the steps in http://support.apple.com/kb/HT1861
-
Installing CS3 - serial number fail
Running 10.6.8 in an Intel iMac and trying to upgrade to Yosemite but need to also upgrade my Dreamweaver. I installed from CS3 disc but the serial number from the disc box is not recognised...
Contact Support team to sort this out.
http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html -
Upgrade serial number fails on 64-bit RedHat
Support wants to charge me $249 to have someone answer this question, so I am trying here...
My CF8 upgrade key works fine, using my old CF6/MX key, when installing on 32-bit RedHat 32-bit Linux.
Now I've downloaded/installed the 64-bit CF8 on RedHat 64-bit Linux. When I try to enter my upgrade key, using same previous CF6/MX key, I just get the error "This combination of license keys does not constitute a valid upgrade."
Known issue? Bug? Any ideas??This may or may not be relevant (you message doesn't say if you're
running Standard or Enterprise) but CF8 64-bit is an Enterprise
feature and not available in CF8 Standard.
Mack -
Apparently, there was a patch to fix this very same problem one year ago — i’ve tried it and it hasn’t helped. The first attempt failed to install. The second attempt supposedly succeeded but failed to help. I then tried going to the latest update -- 13.0.6 i believe -- but the exact same thing happened. It either failed to update successfully, or didn't help.
I’ve looking through my adobe account, and I can’t find CS6 registered with my products. Theres a copy of Elements 10 registered to the date when I believe my CS6 purchase occured, but whether this is new or not, I don’t know. I never peruse my adobe account enough to compare. Regardless, the serial number failed to help.
If there is anyone that can assist me, it would be greatly appreciated. I have a lot of work I need to be able to get back to.Sign in, activation, or connection errors | CS5.5 and later
Download CS6 products
For anything beyond that you will have to provide proper system info and other details, which you haven't done so far.
Mylenium -
I just bought and installed Adobe Acrobat XI Pro, but when I open it, or access a PDF file, I get the error message "Serial Number you provided is valid, but a qualifying product could not be found on this computer."
The list of products on the drop down list that comes with this message includes Adobe Acrobat XI Standard and Adobe Acrobat X Pro Macintosh, but doesn't include Adobe Pro XI for Windows. Selecting either of those, and using my serial number, fails, of course. As a result, I can't run my newly purchased program, or access any PDFs.
Please tell me what to do.
Chuck Poland
[email protected]Chuck you have placed Order for Acrobat Upgrade if you don't have any previous version of Acrobat than you need to cancel this order and need to buy a full version.
Maybe you are looking for
-
Enhancement for free goods ratio
Hi, standard free goods are in the ration 1:1 how do we enhance the free goods for 1:2 ratio(if customer purchase one meterial , two different meterials are free) Can anybody tell me how i can do the enhancement. Thanks & Regards. Praveen.** Edite
-
Bridge place command no longer works for indesign 2014
Bridge place command no longer works for indesign 2014. It only gives Photoshop as an option. How can I get all other Adobe programs listed under Place ?
-
Iphone display shattered. How to access content in iTunes without 4-digit passcode?
A pickpocket took my iPhone when I tried to photograph him, and slammed it in the asphalt The screen and display is broken and the touch-function won't work. But someone is still in there! However, when I plug the phone to my computer(not a Mac) iTun
-
Big problem during installation of Flash CS5.5
I have already downloaded the trail version of Flash CS5.5. During the installation progress, it asked me "Please insert Disk Adobe Flash Proessional CS5.5 to continue". But I'm installing the TRAIL version. Why did it happen??? What should I do?
-
Why does adobe illustrator cs6 trial version keep uninstalling after restart?
I have downloaded the trial version of adobe illustrator, I do my work turn my computer off, the next day the file has no icon and will not load when clicked upon. Any help with this?