Can't HotSync Centro ("Serial connection failed to initialize")
Every time I start my laptop (Sony VAIO, running Vista) I get the following error message: "Serial connection failed to initialize (The selected port, COM4, is not available at this time. HotSync Manager will open the port when it becomes available.)." I haven't been able to HotSync my Centro for some time now, as the port apparently never does "become available".... Any suggestions? Thanks in advance!
How are you connecting to the computer?
What do you have the HotSync Manager set for? A serial connection? ("Local")?
It should be set to "Local USB".
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Similar Messages
-
Can't over ride "Secure connection failed", no over ride option shows.
Secure Connection Failed
I have connected to this page many times before.
Emptied cache and cookies last night. Now FF won't allow
site. There is no "Allow" option showing on warning screen.
How can I over ride/ allow?
An error occurred during a connection to ohiomeansjobs.com.
The OCSP server has no status for the certificate.
(Error code: sec_error_ocsp_unknown_cert)My friend has found a workaround:
[7/24/14, 10:08:46 AM] Andy Nowakowski: go to 'about:config' in a new tab
[7/24/14, 10:09:13 AM] Andy Nowakowski: toggle security.use_mozillapkix_verification
[7/24/14, 10:09:23 AM] Andy Nowakowski: and it will return to previous behavior
found on the bugzilla :)
''(fixed pref name - c)'' -
I am running a web-based CMS that cycles through a number of pages, each for different times ( ranging from 40 seconds to 2 minutes )and is displayed in a number of shops. Every now and then our internet drops, and the page errors with connection failed. I’m wondering if there is anyway to auto reload the page as soon as the error connection failed is showing. auto-reload addon is not an option as this will interrupt the sequence.
The following error was encountered:<br />
<br />
<ul><li><b>Connection Failed</b></li></ul><br />
<br />
This means:<br />
<br />
<pre>I am running a web-based CMS that cycles through a number of pages, each for different times ( ranging from 40 seconds to 2 minutes )and is displayed in a number of shops. Every now and then our internet drops, and the page errors with connection failed. I’m wondering if there is anyway to auto reload the page as soon as the error connection failed is showing. auto-reload addon is not an option as this will interrupt the sequence.
The following error was encountered:<br />
<br />
<ul><li><b>Connection Failed</b></li></ul><br />
<br />
This means:<br />
<br />
<pre> -
Can not run "Dreamfall" because of failed 3D initialization
Hi!
Just wondering if the onboard ati radeon mobility 7000 graphics card handles 3D-graphics? I'm trying to run the game "dreamfall" (see www.dreamfall.com for system requirements) but on start-up i get the message: "Failed to initialize Direct 3D. Aborting".
Anything I can do to make this work?Hello,
Try and download and install the newest video driver as well as the newest directx modules. After which go to Start-->run-->Dxdiag. From there test the direct draw features and make sure all of them are working normally. Hope this helps. -
Can't use video ichat connection failure
HI
only recnetly about two weeks that i have not been able to contact to any one using ichat. I am from New Zealand, i have tried to contact with friends in Australia and New Zealand however video ichat does not connect. I used to use it until about 2 weeks ago and then it stopped working.
text ichat works fine. even i can send invitation for video ichat and people can "accept" it however the connection fails.
can you please help me.Hi,
iChat can not be pinned down to one specific Network.
In iChat 4 it sees several things as Two or more Networks.
MIMO routing devices the Multi Broadcast the WiFi Channels get seen this way.
Connecting to a LAN with two DHCP server such a a modem that routes doing DHCP and a Router doing the same - the Mac gets two IPs.
Similarly if you connect to a routing device with WiFi and Ethernet you get two IPs
(As will Hopping on to a Neighbour's Wifi Network whilst Ethernet to your own)
Parallels is a problem for some if it is set to Share the Mac's IP and the two VPNs that are created in System Preferences > Network are active (even if Red) they need to specifically be set to Off and the App set to get it's Own IP from the routing device.
Internet Sharing in System Preferences > Sharing can also be a problem even if there is nothing linked to Share it with.
As Firewire uses an IP like format to identify devices I have seen this connected to a Stills camera show up as a Network in System Preferences > Network and cause problems.
So it would seem that the sharing of the two Ethernet ports is seen as two networks by iChat.
10:08 PM Wednesday; August 13, 2008 -
Hello,
This is the first time I am using this forum. I am stuck and need some help. I received this error message both on SQL 2005 and 2008. I am currently using SQL 2008 DEV for testing purposes and I am experiencing this error message when trying to connect to Database Engine Tuning Advisor. I am using the SA account so I should not have any security issues. Also this is a fresh install of SQL 2008 DEV on a fresh install of Windows XP Pro with all SP. Can some please help.
Error:
"Failed to initialize MSDB database for tuning (exit code: -1073741819). (DTAClient)"
===================================
Failed to open a new connection.
===================================
Failed to initialize MSDB database for tuning (exit code: -1073741819). (DTAClient)
Program Location:
at Microsoft.SqlServer.Management.DTA.Client.TuningServer.InitializeTuningParametersDatabase()
at Microsoft.SqlServer.Management.DTA.Client.TuningServer.InitializeConnection()
at Microsoft.SqlServer.Management.DTA.Client.TuningServer.Connect()
at Microsoft.SqlServer.Management.DTA.Shell.SessionMonitor.AddServerInternal(SqlConnectionInfo connectionInfo, SqlConnection connection)
at Microsoft.SqlServer.Management.DTA.Shell.SessionMonitor.AddServer(SqlConnectionInfo connectionInfo, SqlConnection connection)
at Microsoft.SqlServer.Management.DTA.Shell.SessionMonitor.OnConnect(Object sender, EventArgs e)I created the below MSDB SP and Tables. Now the issue is resolved.
http://www.devnewsgroups.net/sqlservertools/t67379-database-engine-tuning-advisor.aspx
USE [msdb]
GO
/****** Object: StoredProcedure [dbo].[sp_DTA_start_xmlprefix] Script
Date: 12/31/2008 10:56:11 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_DTA_start_xmlprefix]
as
begin
declare @startTags nvarchar(128)
set @startTags = N'<DTAXML><DTAOutput><AnalysisReport>'
select @startTags
end
GO
/****** Object: Table [dbo].[DTA_input] Script Date: 12/31/2008 10:56:59
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_input](
[SessionName] [sysname] NOT NULL,
[SessionID] [int] IDENTITY(1,1) NOT NULL,
[TuningOptions] [ntext] NOT NULL,
[CreationTime] [datetime] NOT NULL DEFAULT (getdate()),
[ScheduledStartTime] [datetime] NOT NULL DEFAULT (getdate()),
[ScheduledJobName] [sysname] NOT NULL DEFAULT (''),
[InteractiveStatus] [tinyint] NOT NULL DEFAULT ((0)),
[LogTableName] [nvarchar](1280) NOT NULL DEFAULT (''),
[GlobalSessionID] [uniqueidentifier] NULL DEFAULT (newid()),
PRIMARY KEY CLUSTERED
[SessionID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_progress] Script Date: 12/31/2008
10:57:29 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_progress](
[ProgressEventID] [int] IDENTITY(1,1) NOT NULL,
[SessionID] [int] NULL,
[TuningStage] [tinyint] NOT NULL DEFAULT ((0)),
[WorkloadConsumption] [tinyint] NOT NULL,
[EstImprovement] [int] NOT NULL DEFAULT ((0)),
[ProgressEventTime] [datetime] NOT NULL DEFAULT (getdate()),
[ConsumingWorkLoadMessage] [nvarchar](256) NULL,
[PerformingAnalysisMessage] [nvarchar](256) NULL,
[GeneratingReportsMessage] [nvarchar](256) NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_output] Script Date: 12/31/2008
10:57:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_output](
[SessionID] [int] NOT NULL,
[TuningResults] [ntext] NOT NULL,
[StopTime] [datetime] NOT NULL DEFAULT (getdate()),
[FinishStatus] [tinyint] NOT NULL DEFAULT ((0)),
PRIMARY KEY CLUSTERED
[SessionID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_tuninglog] Script Date: 12/31/2008
11:01:21 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_tuninglog](
[SessionID] [int] NOT NULL,
[RowID] [int] NOT NULL,
[CategoryID] [nvarchar](4) NOT NULL,
[Event] [ntext] NULL,
[Statement] [ntext] NULL,
[Frequency] [int] NOT NULL,
[Reason] [ntext] NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_database] Script Date:
12/31/2008 10:57:56 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_database](
[DatabaseID] [int] IDENTITY(1,1) NOT NULL,
[SessionID] [int] NOT NULL,
[DatabaseName] [sysname] NOT NULL,
[IsDatabaseSelectedToTune] [int] NULL,
PRIMARY KEY CLUSTERED
[DatabaseID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_query] Script Date: 12/31/2008
10:59:42 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_query](
[QueryID] [int] NOT NULL,
[SessionID] [int] NOT NULL,
[StatementType] [smallint] NOT NULL,
[StatementString] [ntext] NOT NULL,
[CurrentCost] [float] NOT NULL,
[RecommendedCost] [float] NOT NULL,
[Weight] [float] NOT NULL,
[EventString] [ntext] NULL,
[EventWeight] [float] NOT NULL,
CONSTRAINT [DTA_reports_query_pk] PRIMARY KEY CLUSTERED
[SessionID] ASC,
[QueryID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_querydatabase] Script Date:
12/31/2008 11:00:04 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_querydatabase](
[QueryID] [int] NOT NULL,
[SessionID] [int] NOT NULL,
[DatabaseID] [int] NOT NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_table] Script Date: 12/31/2008
11:00:52 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_table](
[TableID] [int] IDENTITY(1,1) NOT NULL,
[DatabaseID] [int] NOT NULL,
[SchemaName] [sysname] NOT NULL,
[TableName] [sysname] NOT NULL,
[IsView] [bit] NOT NULL DEFAULT ((0)),
PRIMARY KEY CLUSTERED
[TableID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_partitionfunction] Script Date:
12/31/2008 10:58:57 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_partitionfunction](
[PartitionFunctionID] [int] IDENTITY(1,1) NOT NULL,
[DatabaseID] [int] NOT NULL,
[PartitionFunctionName] [sysname] NOT NULL,
[PartitionFunctionDefinition] [ntext] NOT NULL,
PRIMARY KEY CLUSTERED
[PartitionFunctionID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_partitionscheme] Script Date:
12/31/2008 10:59:19 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_partitionscheme](
[PartitionSchemeID] [int] IDENTITY(1,1) NOT NULL,
[PartitionFunctionID] [int] NOT NULL,
[PartitionSchemeName] [sysname] NOT NULL,
[PartitionSchemeDefinition] [ntext] NOT NULL,
PRIMARY KEY CLUSTERED
[PartitionSchemeID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_tableview] Script Date:
12/31/2008 11:01:02 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_tableview](
[TableID] [int] NOT NULL,
[ViewID] [int] NOT NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_querytable] Script Date:
12/31/2008 11:00:33 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_querytable](
[QueryID] [int] NOT NULL,
[SessionID] [int] NOT NULL,
[TableID] [int] NOT NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_index] Script Date: 12/31/2008
10:58:24 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_index](
[IndexID] [int] IDENTITY(1,1) NOT NULL,
[TableID] [int] NOT NULL,
[IndexName] [sysname] NOT NULL,
[IsClustered] [bit] NOT NULL DEFAULT ((0)),
[IsUnique] [bit] NOT NULL DEFAULT ((0)),
[IsHeap] [bit] NOT NULL DEFAULT ((1)),
[IsExisting] [bit] NOT NULL DEFAULT ((1)),
[Storage] [float] NOT NULL,
[NumRows] [int] NOT NULL,
[IsRecommended] [bit] NOT NULL DEFAULT ((0)),
[RecommendedStorage] [float] NOT NULL,
[PartitionSchemeID] [int] NULL,
[SessionUniquefier] [int] NULL,
PRIMARY KEY CLUSTERED
[IndexID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_column] Script Date: 12/31/2008
10:57:42 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_column](
[ColumnID] [int] IDENTITY(1,1) NOT NULL,
[TableID] [int] NOT NULL,
[ColumnName] [sysname] NOT NULL,
PRIMARY KEY CLUSTERED
[ColumnID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_queryindex] Script Date:
12/31/2008 11:00:19 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_queryindex](
[QueryID] [int] NOT NULL,
[SessionID] [int] NOT NULL,
[IndexID] [int] NOT NULL,
[IsRecommendedConfiguration] [bit] NOT NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_querycolumn] Script Date:
12/31/2008 10:59:50 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_querycolumn](
[QueryID] [int] NOT NULL,
[SessionID] [int] NOT NULL,
[ColumnID] [int] NOT NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_indexcolumn] Script Date:
12/31/2008 10:58:39 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_indexcolumn](
[IndexID] [int] NOT NULL,
[ColumnID] [int] NOT NULL,
[ColumnOrder] [int] NULL,
[PartitionColumnOrder] [int] NOT NULL DEFAULT ((0)),
[IsKeyColumn] [bit] NOT NULL DEFAULT ((1)),
[IsDescendingColumn] [bit] NOT NULL DEFAULT ((1))
) ON [PRIMARY]
GO
/****** Object: StoredProcedure [dbo].[sp_DTA_check_permission] Script
Date: 12/31/2008 10:53:21 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_DTA_check_permission]
@SessionID int
as
begin
declare @retcode int
declare @dbname nvarchar(128)
declare @sql nvarchar(256)
declare @dbid int
set nocount on
-- Check if SA
if (isnull(IS_SRVROLEMEMBER(N'sysadmin'), 0) = 1)
begin
return(0)
end
-- if not yukon return
if (patindex('%9.00.%',@@version) = 0)
begin
return (1)
end
-- declare and open a cursor and get all the databases specified in the input
declare db_cursor cursor for
select DatabaseName from DTA_reports_database
where SessionID = @SessionID and IsDatabaseSelectedToTune = 1
-- open
open db_cursor
-- fetch first db name
fetch next from db_cursor
into @dbname
-- loop and get all the databases selected to tune
while @@fetch_status = 0
begin
-- build use db string
select @dbid = DB_ID(@dbname)
-- In Yukon this masks the error messages
set @sql = N'begin try
dbcc autopilot(5,@dbid) WITH NO_INFOMSGS
end try
begin catch
set @retcode = 1
end catch'
execute sp_executesql @sql
, N'@dbid int output, @retcode int OUTPUT'
, @dbid output
, @retcode output
-- if caller is not member of dbo
if (@retcode = 1)
begin
-- close and reset cursor,switch context to current
-- database and return 1
close db_cursor
deallocate db_cursor
return(1)
end
fetch from db_cursor into @dbname
end
-- close and reset cursor,switch context to current
-- database and return 1
close db_cursor
deallocate db_cursor
return(0)
end
GO
/****** Object: StoredProcedure [dbo].[sp_DTA_index_usage_helper_xml]
Script Date: 12/31/2008 10:54:29 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_DTA_index_usage_helper_xml]
@SessionID int,
@IsRecommended int
as
begin
select 1 as Tag,
NULL as Parent,
'' as [IndexUsageReport!1!!ELEMENT],
case when @IsRecommended = 1 then 'false'
else 'true' end as [IndexUsageReport!1!Current],
NULL as [Database!2!DatabaseID!hide],
NULL as [Database!2!Name!ELEMENT] ,
NULL as [Schema!3!Name!ELEMENT] ,
NULL as [Table!4!TableID!hide],
NULL as [Table!4!Name!ELEMENT],
NULL as [Index!5!IndexID!hide],
NULL as [Index!5!Name!ELEMENT],
NULL as [Index!5!NumberOfReferences!ELEMENT],
NULL as [Index!5!PercentUsage!ELEMENT]
union all
select 2 as Tag,
1 as Parent,
NULL as [IndexUsageReport!1!!ELEMENT],
NULL as [IndexUsageReport!1!Current],
D.DatabaseID as [Database!2!DatabaseID!hide],
D.DatabaseName as [Database!2!Name!ELEMENT] ,
NULL as [Schema!3!Name!ELEMENT] ,
NULL as [Table!4!TableID!hide],
NULL as [Table!4!Name!ELEMENT],
NULL as [Index!5!IndexID!hide],
NULL as [Index!5!Name!ELEMENT],
NULL as [Index!5!NumberOfReferences!ELEMENT],
NULL as [Index!5!PercentUsage!ELEMENT]
from [msdb].[dbo].[DTA_reports_database] as D
where
D.SessionID = @SessionID and
D.DatabaseID in
(select D.DatabaseID from
[msdb].[dbo].[DTA_reports_queryindex] as QI,
[msdb].[dbo].[DTA_reports_index] as I,
[msdb].[dbo].[DTA_reports_table] as T,
[msdb].[dbo].[DTA_reports_database] as D
where
QI.IndexID = I.IndexID and
I.TableID = T.TableID and
T.DatabaseID = D.DatabaseID and
D.SessionID = @SessionID and
QI.IsRecommendedConfiguration = @IsRecommended
GROUP BY D.DatabaseID)
union all
select 3 as Tag,
2 as Parent,
NULL as [IndexUsageReport!1!!ELEMENT],
NULL as [IndexUsageReport!1!Current],
D.DatabaseID as [Database!2!DatabaseID!hide],
D.DatabaseName as [Database!2!Name!ELEMENT] ,
R.SchemaName as [Schema!3!Name!ELEMENT] ,
NULL as [Table!4!TableID!hide],
NULL as [Table!4!Name!ELEMENT],
NULL as [Index!5!IndexID!hide],
NULL as [Index!5!Name!ELEMENT],
NULL as [Index!5!NumberOfReferences!ELEMENT],
NULL as [Index!5!PercentUsage!ELEMENT]
from [msdb].[dbo].[DTA_reports_database] as D,
select D.DatabaseID,T.SchemaName from
[msdb].[dbo].[DTA_reports_queryindex] as QI,
[msdb].[dbo].[DTA_reports_index] as I,
[msdb].[dbo].[DTA_reports_table] as T,
[msdb].[dbo].[DTA_reports_database] as D
where
QI.IndexID = I.IndexID and
I.TableID = T.TableID and
T.DatabaseID = D.DatabaseID and
QI.IsRecommendedConfiguration = @IsRecommended and
D.SessionID = @SessionID
GROUP BY D.DatabaseID,T.SchemaName
) R
where
D.SessionID = @SessionID and
D.DatabaseID = R.DatabaseID
union all
select 4 as Tag,
3 as Parent,
NULL as [IndexUsageReport!1!!ELEMENT],
NULL as [IndexUsageReport!1!Current],
D.DatabaseID as [Database!2!DatabaseID!hide],
D.DatabaseName as [Database!2!Name!ELEMENT] ,
R.SchemaName as [Schema!3!Name!ELEMENT] ,
R.TableID as [Table!4!TableID!hide],
T.TableName as [Table!4!Name!ELEMENT],
NULL as [Index!5!IndexID!hide],
NULL as [Index!5!Name!ELEMENT],
NULL as [Index!5!NumberOfReferences!ELEMENT],
NULL as [Index!5!PercentUsage!ELEMENT]
from [msdb].[dbo].[DTA_reports_database] as D,
[msdb].[dbo].[DTA_reports_table] as T,
select D.DatabaseID,T.SchemaName,T.TableID from
[msdb].[dbo].[DTA_reports_queryindex] as QI,
[msdb].[dbo].[DTA_reports_index] as I,
[msdb].[dbo].[DTA_reports_table] as T,
[msdb].[dbo].[DTA_reports_database] as D
where
QI.IndexID = I.IndexID and
I.TableID = T.TableID and
T.DatabaseID = D.DatabaseID and
D.SessionID = @SessionID and
QI.IsRecommendedConfiguration = @IsRecommended
GROUP BY D.DatabaseID,T.SchemaName, T.TableID
) R
where
D.SessionID = @SessionID and
D.DatabaseID = R.DatabaseID and
R.TableID = T.TableID and
T.DatabaseID = D.DatabaseID
union all
select 5 as Tag,
4 as Parent,
NULL as [IndexUsageReport!1!!ELEMENT],
NULL as [IndexUsageReport!1!Current],
D1.DatabaseID as [Database!2!DatabaseID!hide],
D1.DatabaseName as [Database!2!Name!ELEMENT] ,
T1.SchemaName as [Schema!3!Name!ELEMENT] ,
T1.TableID as [Table!4!TableID!hide],
T1.TableName as [Table!4!Name!ELEMENT],
I1.IndexID as [Index!5!IndexID!hide],
I1.IndexName as [Index!5!Name!ELEMENT],
R.Count as [Index!5!NumberOfReferences!ELEMENT],
CAST(R.Usage as decimal(38,2)) as [Index!5!PercentUsage!ELEMENT]
from
[msdb].[dbo].[DTA_reports_database] as D1 ,
[msdb].[dbo].[DTA_reports_index] as I1,
[msdb].[dbo].[DTA_reports_table] as T1,
select D.DatabaseID,T.TableID ,
I.IndexID ,SUM(Q.Weight) as Count,
100.0 * SUM(Q.Weight) /
( 1.0 * ( select CASE WHEN SUM(Q.Weight) > 0 THEN SUM(Q.Weight)
else 1
end
from [msdb].[dbo].[DTA_reports_query] as Q
where Q.SessionID = @SessionID ))
as Usage
from
[msdb].[dbo].[DTA_reports_index] as I
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_queryindex] as QI ON QI.IndexID = I.IndexID
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_query] as Q ON QI.QueryID = Q.QueryID
JOIN
[msdb].[dbo].[DTA_reports_table] as T ON I.TableID = T.TableID
JOIN
[msdb].[dbo].[DTA_reports_database] as D ON T.DatabaseID = D.DatabaseID
and Q.SessionID = QI.SessionID and
QI.IsRecommendedConfiguration = @IsRecommended and
Q.SessionID = @SessionID
GROUP BY I.IndexID,T.TableID,D.DatabaseID) as R
where R.DatabaseID = D1.DatabaseID and
R.TableID = T1.TableID and
R.IndexID = I1.IndexID and
D1.SessionID = @SessionID and
R.Count > 0
order by
[Database!2!DatabaseID!hide],[Schema!3!Name!ELEMENT],[Table!4!TableID!hide],
[Index!5!NumberOfReferences!ELEMENT] , [Index!5!IndexID!hide]
FOR XML EXPLICIT
end
GO
/****** Object: StoredProcedure
[dbo].[sp_DTA_index_usage_helper_relational] Script Date: 12/31/2008
10:54:26 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_DTA_index_usage_helper_relational]
@SessionID int,
@IsRecommended int
as begin select D1.DatabaseName as 'Database Name' ,T1.SchemaName as
'Schema Name' ,T1.TableName as 'Table/View Name' ,I1.IndexName as 'Index
Name' ,R.Count as 'Number of references' ,CAST(R.Usage as decimal(38,2)) as
'Percent Usage' from
DTA_reports_database as D1 ,
DTA_reports_index as I1,
DTA_reports_table as T1,
select D.DatabaseID,T.TableID ,
I.IndexID ,SUM(Q.Weight) as Count,
100.0 * SUM(Q.Weight) /
( 1.0 * ( select CASE WHEN SUM(Q.Weight) > 0 THEN SUM(Q.Weight)
else 1
end
from [msdb].[dbo].[DTA_reports_query] as Q
where Q.SessionID = @SessionID ))
as Usage
from
[msdb].[dbo].[DTA_reports_index] as I
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_queryindex] as QI ON QI.IndexID = I.IndexID
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_query] as Q ON QI.QueryID = Q.QueryID
JOIN
[msdb].[dbo].[DTA_reports_table] as T ON I.TableID = T.TableID
JOIN
[msdb].[dbo].[DTA_reports_database] as D ON T.DatabaseID = D.DatabaseID
and Q.SessionID = QI.SessionID and
QI.IsRecommendedConfiguration = @IsRecommended and
Q.SessionID = @SessionID
GROUP BY I.IndexID,T.TableID,D.DatabaseID) as R
where R.DatabaseID = D1.DatabaseID and
R.TableID = T1.TableID and
R.IndexID = I1.IndexID and
D1.SessionID = @SessionID and
R.Count > 0
order by R.Count desc end
GO
/****** Object: StoredProcedure [dbo].[sp_DTA_database_access_helper_xml]
Script Date: 12/31/2008 10:53:31 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_DTA_database_access_helper_xml]
@SessionID int
as
begin
select 1 as Tag,
NULL as Parent,
'' as [DatabaseAccessReport!1!!ELEMENT],
NULL as [Database!2!Name!ELEMENT] ,
NULL as [Database!2!NumberOfReferences!ELEMENT],
NULL as [Database!2!PercentUsage!ELEMENT]
union all
select 2 as Tag, 1 as Parent,NULL,D1.DatabaseName ,
R.Count ,
CAST(R.Usage as decimal(38,2)) from
[msdb].[dbo].[DTA_reports_database] as D1 ,
select D.DatabaseID,SUM(Q.Weight) as Count,
100.0 * SUM(Q.Weight) /
( 1.0 * ( select CASE WHEN SUM(Q.Weight) > 0 THEN SUM(Q.Weight)
else 1
end
from [msdb].[dbo].[DTA_reports_query] as Q
where Q.SessionID = @SessionID ))
as Usage
from
[msdb].[dbo].[DTA_reports_database] as D
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_querydatabase] as QD ON QD.DatabaseID =
D.DatabaseID
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_query] as Q ON QD.QueryID = Q.QueryID
and Q.SessionID = QD.SessionID and
Q.SessionID = @SessionID
GROUP BY D.DatabaseID
) as R
where R.DatabaseID = D1.DatabaseID and
D1.SessionID = @SessionID and
R.Count > 0
order by Tag,[Database!2!NumberOfReferences!ELEMENT] desc
FOR XML EXPLICIT
end
GO -
When I click on a link for a google search, I get the "Secure Connection Failed" error in Firefox. It states, "Please contact the server administrator or email correspondent and give them the following information: Your certificate contains the same serial number as another certificate issued by the certificate authority."
I have followed the instructions here:
https://support.mozilla.org/en-US/kb/Certificate%20contains%20the%20same%20serial%20number%20as%20another%20certificate
and looked at this article:
https://support.mozilla.org/en-US/questions/1028103?esab=a&as=aaq
I have uninstalled and reinstalled Firefox, deleted the entire profiles folder, and reset Firefox. I see that the older (orphaned) article points to my router. However, I have a new router and have updated its software. There is no button to add an exception (as noted in the article), so I can't just bypass it. This problem does not occur with IE, so I have a hard time believing it is my router.
How do I troubleshoot this issue? I really don't want to change browsers.Here is a screen shot of the error.
-
I can't login to the App Store - connection failed...
yesterday I had totally forgot my password and security question & went through 'Apple Express Lane' in getting assistance to reset my password for my ID "[email protected]" account so I can update to Lion OSX & merge my MobileMe account to iCloud through the 'App Store'
the password was reset and was able to login to the App Store with new password and download OSX Lion.
I have now successfully installed OSX Lion and have completed all the updates up to OSX Lion 10.7.3
after the updates, I wanted to purchase some games through the App Store and tried to login, but I get a message in red
'Connection Failed'
I tried to find answers and post a topic in 'Apple Discussions Forum' using Safari 5.1.3, but it won't let me sign-in on my ID '[email protected]' and my password.I get the following message :
'This Apple ID has been locked for security reasons. Visit iForgot to reset your account (https://iforgot.apple.com). Forgot your Apple ID?'
But I just reset it with the Express guy??
The other thing is I keep getting 'security certificates' popping up as well every time I attempt to login into 'Apple Discussions' or click to another webpage for a different site. Even when I click on legitimate(I hope) certificate to always trust, I find I have to repeat the step again
even with iTunes when I go to sign in I get the following:
iTunes can't verify the identity of the server "buy.itunes.apple.com"
The certificate for this server is invalid. You might be connecting to a server that is pretending to be "buy.itunes.apple.com" , which could put your confidential information at risk. Would like to connect to the server anyway?
so... wishing I didn't upgrade now
I had gone back to the apple support by email and they said I needed to reset my password again.
which have done and still no change. Twice now over the last two days in changing password.
When I use 'Firefox 10.0.2' I can login to iCloud & Apple Support Community & and don't get the pop up verify security cert's
I hope I have given 'enough' details, any help would greatly appreciated
My Hardware specs:
iMac 7,1
2.4Ghz Intel Core 2 Duo
4 GB Memory
Thanks
DaveI am having the same problem. It was working fine until yesterday.
-
I can not access my Time Capsule from the Finder. This was working, but on 12/25/2011, the disk can no longer be accessed. It shows up in the Finder, but when I try to connect, I get a "Connection Failed" message. If I cycle the power, it works for a little while and then fails again.
hello
No i'm connect via ethernet (cable) with TC. The problem is when I try to connect to my TC when I'm away from home like for ex. using a free wi fi spot!! Well in this case the icon appear on my Finder but refuse to connet!! ( connection faild ). -
Well I believe I described the problem above. I want only to add that the external hard drive is a Seagate FreeAgent GoFlex Drive 1TB and the wireless modem router is a Belkin N Plus (model F5D8635-4 v1). Also, in the finder window under "shared" I see a "belkinserver" and when I click it, it says "connection failed". If I click "connect as" I get the "the server "belkinserver" is available on your computer..." which I mentioned above. I tried to connect macbook via ethernet to the modem router and then when I typed "smb://belkinserver" it immediately prompted me for a username and a password and when I typed them finally I got to enter the contents of the hard drive! So what's the problem wirelessly?
If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide. -
"Connection Failed" - can't access win machine
hello,
when i try to use my new MacBook Pro's Finder to connect to one my windows machines on my local network, it reports "Connection Failed".
when i try to use the "Connect As..." button, absolutely nothing happens on click. no prompt for username & password.
i can access the same exact computer perfectly from my iMac (the "Connect As..." button works there. both are running leopard 10.5.2.
any idea whats up? according to this post, its not windows-related:
http://discussions.apple.com/thread.jspa?threadID=1234936
thanks!
mattDisable anti virus software if installed
Make sure the firewall is turned off in System Preferences > Security & Privacy > Firewall
Make sure Gatekeeper is enabled
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected. If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper -
My Mac Book Pro OSX 10.6.8 has suddenly stopped printing to Epson Stylus Photo RX690 after many successful print runs.
Print attempts are paused with the Message:
Connection failed: NT_STATUS_BAD_NETWORK_NAME
The Epson is shared with a Toshiba laptop with Windows Vista.
All assistance is appreciated!
Cam OpiePulling one out of the air here, since it looks like you don't mind trying stuff...
Have you tried it with a trailing slash yet?
About the best I can make out of...
http://www.mail-archive.com/[email protected]/msg42165.html -
Every time I connect my iPhone to iTunes on my mac it alwasys says iPhone can not sync because sync session failed to start. What do I do to fix this problem?(It's an iPhone 4s with the latest IOS 7.0.2
bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone. -
Can i get my serial number from itunes without connecting my ipod?
cani i get my serial number from itunes without connecting my ipod?
Yes, but first you have to make a hat out of aluminum foil, sacrifice 2 pounds of red jelly beans to the serial number god, run around the block three times on one leg while chanting OH Wa Ta Goo Siam. When you get back home the serial number will be written on a piece of paper inside a mayonaise jar that is buried exactly 49.475 feet NNW of the southeast corner of your house... But don't tell anyone I told you this....
Now where's my hat.... -
Can't get to Time capsule back-ups -- Connection Failed and "Connect As" does nothing
I had to replace my hard drive. I am trying to access the Time Machine back-ups. I can see the back-up volume in the Finder under the "Shared" category, but when I try to connect to the back-up volume, I immediately get "Connection Failed" and the "connect as" button does nothing when I click on it.
Do I have to re-start backups before I can get into the old back-ups?? Any advice on how to get "Connect As" to let me connect?
Thank you.EXACTLY the same problem..
10.5.6 iMac
Maybe you are looking for
-
PCMCIA card and CF card reader features in HP Envy-15 Notebook
Hi this is Thrived, I am looking for High end notebook. thats how I latched on to Envy-15 model. But I want PCMCIA card and CF card reader facility. Is it possible? and How? Please suggest me an answer.
-
I am locked out of my ipad. how do i get back in?
Locked out of iPad 2. Need to reset password
-
Can the column names be changes dynamically in OBIEE presentation
Hi, Is thr any way through which I can change the column names depending on the value of a column. the table structure is Plan_name Character1 Character2 Character3 .... so here according to plan_name the meaning of each character column c
-
Idml open and idml Save As crash InDesign CS6 8.0.1
I am using: 2012 MacMini Mac OSX 10.8.3 2.6 GHz Intel Core i7, 8 gb 1600 MHz DDR3 InDesign CS6 Version 8.0.1 I have run software update Opening an idml file crashes InDesign. Saving a file to idml crashes InDesign. Assistance would be very much appre
-
Composing or replying letter space problem in mail
I have been noticing that whenever I compose or reply to a mail when I type the first few words the letter spacing is correct, then about the sixth or seventh word the letter spacing increases. Very weird as I was thinking maybe somewhere I hit a key