Serious bugs in 10.6.4 with trash and permissions

Hi i need help to trash my adobe cs4 folders, for some odd reason the trash re appears every time i try to cone my drive via superduper or CCC, no matter what i do it re appears,
i fixed the permissions so the administrator can read and write, i emptied the trash securely as some suggested, but its back and this is the 4th time, any idea please do tell me, i also used a terminal command, emptied the trash, then its back again after a few minutes!
This started after updated to 10.6.4 btw

Did you re-try cloning with CCC after you had first re-trashed the items *directly from the 502 folder window* you obtained via Go to Folder?
If you can see the items in the *Go To Folder> /.Trashes/502* window, then you apparently have *two different* .Trashes>502 folders. The items that keep re-appearing in your Trash icon window (the ones you did the GetInfo on) are in the HD>.Trashes>502 folder of your external drive. The Go to Folder command that I gave you is looking at the HD>.Trashes>502 folder on your startup drive. The Trash icon on the Dock may not look at that folder - trashed items on the startup drive normally go into Home>.Trash, a completely different place.

Similar Messages

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Problems with access and permissions

Hi,
I installed the 10.5.3 update, well software update installed 10.5.3, and it managed to completely bugger up my system. I could not boot up, nor could i safe boot. A verbose boot revealed it was stuck in some form of loop, loading something, which then quit due to an error and it continued to try and load it. I resorted to reinstalling os x with an archive and install due to my external disk breaking i could not restore from a time machine back up. BAsically the install managed to go wrong, and i ended up having to reinstall again. When i finally got to my desktop none of my settings had been carried over and they were in a previous system folder. I fired up migration assistant to copy it over because of the access and permissions stopping me from doing it manually. Migration assistant told me i needed a huge amount of terabytes to perform the migration! So i tried to do it manually.
Basically all my stuff is in my home folder but none of it is set to my new user name, all the rights are set to _Unknown which is, im guessing, my old user account. Is there any way to mass set the access and permissions to my new account, including that of all the subfolders and contents?
Any help would be appreciated, im at the end of my tether here! This is the 3rd time ive had problems with a leopard upgrade. Why does software update always fail to perform an upgrade?

From your account, open /Applications/Utilities/Terminal, and copy the blue text in, and press enter (you'll have to provide your admin password, which you won't see. That's normal.)
sudo chown -R `id -u`:`id -g` ~
After that finishes, the prompt with Computername:~ username$ will come back, and you can quit Terminal.
To be sure, you should log out and log in again.
Good luck!

Bug in LabVIEW 6.1 with Windows 2000 permissions

This is a bug I've discovered when using LabVIEW 6.1 in a multi-user Windows 2000 environment.
After underlying software changes and the like, it is common that when exiting a VI, a message pops up saying that an underlying VI has changed and must be saved. As a regular user, this cannot be done, because regular users don't have write access to the LabVIEW system folder.
When the same thing is done as Administrator, the changes can be saved. In this case, it was a change to a VI residing in the NI-DAQ ai.llb. After the save, the permissions on ai.llb (which by default included liberal access for the Users group) were changed to allow only access by the Administrators group, making it impossible for a regular user
to use that VI or any VI depending on it.
The solution is to manually edit the permissions on the .llb after the save to add the Users group back into the allowed users list.

NI has been keeping fairly up to date on permissions. If you search the entire www.ni.com using Administrator as the keyword, you'll find many of these issues and their resolutions.
2006 Ultimate LabVIEW G-eek.

10.5.5 update problems with firewall and permissions

Hello, I have a small office (4 people) with one server that has both leopard server (standard install) and filemaker server installed on it. I'm hosting our website, running ical services, file sharing and Firewall. I avoided doing any updates because everything was working well and I didn't want it to get screwed up. Well our website was hacked into so I went ahead and ran the combined update and restarted. Everything booted up fine and is working with the exception of Filemaker Server database access and webdav access to our site folder.
The Filemaker access is a firewall issue but I'm not sure about how to proceed. In order to open the appropriate port it seems I need to use server admin (instead of server prefs) and run the firewall from there. If I allow the Filemaker server service for "Any" doesn't that leave me vulnerable from the outside? if so how would I go about allowing it only to the internal file services?
For the webdav services when using Dreamweaver to upload files to our server I receive a permissions error not allowing me to upload any files. I have repaired permissions and still get the same error. My question is 2 part:
Any ideas on what to do about the permissions?
Would it be more secure to turn off webdav and create a share point ( I am local ) for the site folder with "others" read only privileges and my web designer read and write privileges?
If I continue to use webdav should I secure the folder using realms and give "Everyone" browse only privileges and my web designer Browse and Read/wright privileges?
Thanks in advance
Steve

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

I am have a problem with ACLs and permissions

How come my Public folder that is shared and has some shared folders has certain users and groups with permissions, like (ACLs) workgroup, _spotlight, (POSIX) system, wheel, everyone, but when they are on a client machine, they say (POSIX) <username>, staff, everyone.
Basically I don't get why they don't carryover to the Client side. Is feature? or something that has to be enabled? that I am missing...? Any help would be great full.
Thanks
Laters...
Message was edited by: rezwits

are the charecter like this Ж З И Й - someone had comented about a similiar issue - contacted applecare and they said reinstall os...call apple care for
safety

WARNING: Serious bug in Netscape 6.01 browser

All--
I've just been bitten by a serious bug in the Netscape 6.01 browser, and
want to let you know about it before it bites you too. Full bug details can
be found at http://bugzilla.mozilla.org/show_bug.cgi?id=55055
A short summary is that the back & forward buttons incorrectly resubmit form
fields. For example, say I have this page flow:
Page A -> Page B - (submit form) -> Page A -> Page C
Use Back button to go from C back to A
On backing up from C to A, Netscape tells me that there are posted form
elements and asks if I want to resubmit them or cancel the back action.
Because I'm backing up to A, it tries to resubmit the form fields from page
B in order to show page A!
What does this mean? It means that the Web application gets another hit to
page B, as if the user had pushed a button on it again--even if this isn't
allowed by the application. In other words, the back button becomes a
serious threat to an application's consistency. Neither IE nor Opera do
this, nor did any other version of Netscape.
Please keep this behavior in mind if you are designing an application that
could be used with Netscape 6. For those transactions that you need to
ensure aren't executed more than once, you may want to set a hidden field on
the page (page B) or otherwise keep track of a value that indicates whether
the transaction has been executed or not. Another option might be to set an
HTTP header indicating that the problematic page (page A) can't be cached by
the browser (this differs from what one might do in the "normal" situation
of telling the browser not to cache page B, so that backing up from page A
to B wouldn't be possible).
Todd

Double tap with THREE fingers. Then go into Settings>General>Accessibility and turn zoom off.

Serious Bug Powerbuilder 12.5.2 build 5609 with Inheritance

Hi ,
I'm using Powerbuilder 12.5.2. build 5609. I think it is the latest release. I have three windows in my app.
The Grandfather , the father and the child. Child window (w_child) is inherited from the father (w_father) which inherits from the grandfather (w_grandfather).
I have some events in my windows , clicked events with code etc.
I made a change in the grandfather , regenerated the father and the child and my code in the child window was messed up!. And when I say messed up I mean that the code in my clicked event was disappeared or moved in other cases to other events.
With Full build and incremental build didn't fix the bug.
Using export and import FIXED the issue.
BUT.....
Why is this happening ? Of course this is a Powerbuilder BUG but do I need to export and import my objects when I make a change to ancestors objects ?
FYI using the edit source option I can see the code that it's there.
Will this issue been fixed because this is a very serious BUG. Every time I want to make a change to ancestors should I need to export all objects and import them again ???
thank you
zkar

Hi Andreas ,
I don't know.
But I tried the below scenario and found a different bug.
Same hierarchy. Grandfather, Father and Child.
Steps to reproduce.
1. Go to Fathers screen and Add a button. Leave the name as it is. cb_1
2. Go to Grandfather and add a button(didn't have any buttons yet). The name will be cb_1.
If you try to open the Father's screen you will be prompted from Powebuilder with a messagebox which suggest to make the changes for you because there was a name conflict. OK fair enough.
But.
If you press OK and let powerbuilder handles this then this doesn't work.
Anyway. This is a completely different thing from the original post . But I have just founded out trying to reproduce it to a new application.
FYI. The application was at first in Powerbuilder 10 but we have Migrated succesfully to powerbuilder 12.5 and It was working fine until we ;ve changed the intermediate level of inheritance.
The solution to my problem is export and import the intermediate level so don't search anymore. You will loose time trying to reproduce it.
thank you

Itunes with Podcasts - serious bug - cant delete

Hi all
Im using the latest version of Itunes with my 60gb ipod on XP, and ive noticed a serious bug where once you add podcasts to your ipod via itunes, you cant delete them in itunes at all - they stay grey even when the device is disconnected.
You try to highlight one and press delete, but its faded out. How do I resolve this?
Rodney

Hi Rodney, Welcome to the forums.
Ok, first off, is your iPod in automatic update?
Try putting it into manual update. Then you should be able to remove the podcast.

Serious bug in 10.7.4 and 10.8 with 2009 13" MacBook Pro?

Does anyone else own a mid-2009 13" MacBook Pro and have problems Kernel Panics with 10.7.4 or 10.8.
Ever since 10.7.4, I have been getting Kernel Panics anywhere from 0-5 hours after bootup on my 2009 13" MacBook Pro.
I have done everything I could to isolate the issue including pulling the SSD and going back to the original SATA platter drive to no avail. Memory tests pass and this laptop is 100% stable and reliable in 10.7.3 (which I was forced to reformat and reinstall to).
After many days (and weeks) trying to figure something out, I am theorizing there has to be something with the 10.7.4 and 10.8 OSes that just doesn't seem to work properly with the mid-2009 13" MacBook Pro. My friends with 2010 and 2011 13" MacBook Pros have no problems whatsoever with Mountain Lion, so I'm wondering if perhaps the NVidia chipset in the 2009 is problematic.
Anyone else in the same boat?

I threw another SSD into a USB dock and installed 10.8 on that drive. Here's a Kernel Panic that occured:
Fri Aug 17 09:01:36 2012
panic(cpu 0 caller 0xffffff800a8b7b95): Kernel trap at 0xffffff800a8876bc, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x0000000110e94000, CR3: 0x0000000034296000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0x0010000000000000, RCX: 0xffffff801d8af550, RDX: 0x0000000000000821
RSP: 0xffffff80f1eeb960, RBP: 0xffffff80f1eeb980, RSI: 0x00000000219b6bd2, RDI: 0xffffff800dd0b190
R8: 0x0000000000000000, R9: 0xffffff80f1eebbf0, R10: 0x0000000000000000, R11: 0xffffff80f1eebeb8
R12: 0xffffff800dd0b190, R13: 0x0000000000000004, R14: 0xffffff8026140300, R15: 0x0000000000801000
RFL: 0x0000000000010206, RIP: 0xffffff800a8876bc, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000110e94000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f1eeb600 : 0xffffff800a81d5f6
0xffffff80f1eeb670 : 0xffffff800a8b7b95
0xffffff80f1eeb840 : 0xffffff800a8ce4ad
0xffffff80f1eeb860 : 0xffffff800a8876bc
0xffffff80f1eeb980 : 0xffffff800a87bbb2
0xffffff80f1eeb9e0 : 0xffffff800a8e3d12
0xffffff80f1eebc40 : 0xffffff800a8e2fb5
0xffffff80f1eebc70 : 0xffffff800aafb8dd
0xffffff80f1eebd80 : 0xffffff800a911d62
0xffffff80f1eebde0 : 0xffffff800a908139
0xffffff80f1eebe50 : 0xffffff800ab77089
0xffffff80f1eebf00 : 0xffffff800ab77284
0xffffff80f1eebf60 : 0xffffff800abe14e3
0xffffff80f1eebfb0 : 0xffffff800a8ce9dd
BSD process name corresponding to current thread: Setup
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide:     0x000000000a600000
Kernel text base: 0xffffff800a800000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 1124562078502
last loaded kext at 271743333103: com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1 (addr 0xffffff7f8c8be000, size 106496)
last unloaded kext at 406107949543: com.apple.filesystems.msdosfs          1.8 (addr 0xffffff7f8c857000, size 57344)
loaded kexts:
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleHDA          2.3.0f2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver          2.3.0f2
com.apple.driver.AppleBacklight          170.2.3
com.apple.GeForce          8.0.0
com.apple.nvenet          2.0.19
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.AirPort.Brcm4331          600.15.20
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleIRController          320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.0
com.apple.driver.AppleUSBHub          5.1.6
com.apple.driver.AppleFWOHCI          4.9.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleUSBOHCI          5.1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport          2.1.1
com.apple.iokit.IOFireWireSBP2          4.2.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSurface          86.0.2
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.NVSMU          2.2.9
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.driver.AppleUSBMergeNub          5.1.5
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

Buyer Beware - Verizon is a company that is only out to get your cash and leave you with trash.

Verizon is a company that is only out to get your cash and leave you with trash. Verizon has mastered deception. Do not get strung along like I did by calling in and letting them try to fix anything-they are there to make sure you get past your 14 day return period so you are locked into a new 2 year contract and can’t take back any of the accessories you bought for your product. If your product does not work out of the box, RETURN IT IMMEDIATELY, do not call in for tech support and take back any accessories you bought for the product as it also has the 14 day policy too. First off let me say that as far as the PHONE SERVICE, it has been great…however…here is what I have experienced with the 3G Droid Bionic and Verizon. I decided to get the Droid Bionic 4G since they are supposed to have 4G service in my area. It’s either their service or the product that is not 100% 4G like my 3G HTC Imagio is 100% 3G, the so called "4G" Bionic flips in and out. I can’t count how many hours I’ve been on the phone with techs at Verizon and Moto but each time, they all had something different to say, but nothing ever worked and if it did, it didn’t work for long before it went back to the same flip flop. There were several other issues as well but too many to list, but one is that when I was tethered and would get a notification it disconnected from the internet...NOT SUPPOSE TO HAPPEN. I had a specific need for the 4G and since it doesn’t work, I don’t NEED it. The biggest lie I bought into is that MOTO is/was supposed to release a software update that is supposed to fix the flip flop 3G to 4G. I talked to a tech tonight at Verizon that was honest enough to tell me that if there was one that was going to be released (within my 14 day period) that they would have been notified of that. Well guess what, he doesn’t have any notices. But every person I talked to at Verizon said there was going to be an update, is it another one of those…no one knows their butt from a hole in the grown or was he telling the truth. Well it makes sense now that when I was talking with the second level tech at MOTO he didn’t know what the heck I was talking about. There’s your proof that the people you call and talk to at Verizon are devious, deceptive jerks and are only out to make money off us and could really care less that you just spent a bundle of money on a piece of cow dung and that their only goal is to keep you tied into the 2 year contract. After talking with the last tech at Verizon that told me there was no notification of a software update coming from MOTO or at least not in the next two weeks, I decided to take back all my accessories to the Verizon store in my area and return the Bionic tomorrow. But guess what, unlike the rest of America where the return policies are 30 days, Verizon also changed the return policies on the accessories too. So I’m stuck with over $100 of “STUFF” that cannot be used on any other phone. My bad, I didn’t have my reading glasses, look 12 inches down the long small print page to see that it said 14 days, when I bought the “STUFF” and I didn’t know that Verizon’s changes applied to the accessories in there stores too. Why is this and issue because Verizon did have me buy another Bionic phone under a new 14 day policy but because I didn’t realize that same policy applied to the hardware at their local stores, I’m stuck with the “STUFF”. Guess what Verizon; you devious, deceptive jerks, what goes around comes around. You are going to get to know me real well in the coming days, weeks, months and years; I’m going to picket until the freakin cows come home and hopefully get on the local news channels too. I’m going to hopefully create a nationwide movement that will either ruin your company or force you to restore the 30 day policy and I don’t care if you try to sue me that will be even better as it will draw even more attention. Money is hard to come by these days and I’ll not let you screw me over like this and get away with it. Because you are treating your customers like cow dung, I WILL NEVER extend my contract again; when this contact ends I’m switching to another cell provider. I’ve been with you since 2004 but tomorrow I’m switching my family’s phones over as soon as possible since they are not under any contract; this I hope will catch on and others will do the same. We can support the other companies and help them grow so that they can also provide better cell service and then we the people will have a choice, NOT TO GET SCREWED. Verizon, you are going to be the reason that a lot of time is going to be wasted in your stores because of processing numerous returns and a lot of Fed Ex charges on you for people retuning your trash items…unless you want to get it right the first time and or BECOME AMERICAN again and restore the 30 day policy. Verizon’s 4G network and or MOTO products still have so many bugs in them that you might as well keep your 3G and wait for another year or so until they fix everything and stop their devious, deceptive tricks, restore the 30 day policy and start selling products that work out of the box. Verizon, you wouldn’t be the first large company that is going to fall if you keep doing this kind of business. See yea on the news. One comment for Moto: Do you really want to associate yourself with a company that treats their customers like this? I guess Birds of a feather flock together…and get shot together. Yours Truly, One very, very, VERY angry customer

Randy2009 wrote:
Verizon is a company that is only out to get your cash and leave you with trash. Verizon has mastered deception. Do not get strung along like I did by calling in and letting them try to fix anything-they are there to make sure you get past your 14 day return period so you are locked into a new 2 year contract and can’t take back any of the accessories you bought for your product. If your product does not work out of the box, RETURN IT IMMEDIATELY, do not call in for tech support and take back any accessories you bought for the product as it also has the 14 day policy too.
First off let me say that as far as the PHONE SERVICE, it has been great…however…here is what I have experienced with the 3G Droid Bionic and Verizon. I decided to get the Droid Bionic 4G since they are supposed to have 4G service in my area. It’s either their service or the product that is not 100% 4G like my 3G HTC Imagio is 100% 3G, the so called "4G" Bionic flips in and out. I can’t count how many hours I’ve been on the phone with techs at Verizon and Moto but each time, they all had something different to say, but nothing ever worked and if it did, it didn’t work for long before it went back to the same flip flop. There were several other issues as well but too many to list, but one is that when I was tethered and would get a notification it disconnected from the internet...NOT SUPPOSE TO HAPPEN. I had a specific need for the 4G and since it doesn’t work, I don’t NEED it.
The biggest lie I bought into is that MOTO is/was supposed to release a software update that is supposed to fix the flip flop 3G to 4G. I talked to a tech tonight at Verizon that was honest enough to tell me that if there was one that was going to be released (within my 14 day period) that they would have been notified of that. Well guess what, he doesn’t have any notices. But every person I talked to at Verizon said there was going to be an update, is it another one of those…no one knows their butt from a hole in the grown or was he telling the truth. Well it makes sense now that when I was talking with the second level tech at MOTO he didn’t know what the heck I was talking about. There’s your proof that the people you call and talk to at Verizon are devious, deceptive jerks and are only out to make money off us and could really care less that you just spent a bundle of money on a piece of cow dung and that their only goal is to keep you tied into the 2 year contract.
After talking with the last tech at Verizon that told me there was no notification of a software update coming from MOTO or at least not in the next two weeks, I decided to take back all my accessories to the Verizon store in my area and return the Bionic tomorrow. But guess what, unlike the rest of America where the return policies are 30 days, Verizon also changed the return policies on the accessories too. So I’m stuck with over $100 of “STUFF” that cannot be used on any other phone. My bad, I didn’t have my reading glasses, look 12 inches down the long small print page to see that it said 14 days, when I bought the “STUFF” and I didn’t know that Verizon’s changes applied to the accessories in there stores too. Why is this and issue because Verizon did have me buy another Bionic phone under a new 14 day policy but because I didn’t realize that same policy applied to the hardware at their local stores, I’m stuck with the “STUFF”.
Guess what Verizon; you devious, deceptive jerks, what goes around comes around. You are going to get to know me real well in the coming days, weeks, months and years; I’m going to picket until the freakin cows come home and hopefully get on the local news channels too. I’m going to hopefully create a nationwide movement that will either ruin your company or force you to restore the 30 day policy and I don’t care if you try to sue me that will be even better as it will draw even more attention. Money is hard to come by these days and I’ll not let you screw me over like this and get away with it.
Because you are treating your customers like cow dung, I WILL NEVER extend my contract again; when this contact ends I’m switching to another cell provider. I’ve been with you since 2004 but tomorrow I’m switching my family’s phones over as soon as possible since they are not under any contract; this I hope will catch on and others will do the same. We can support the other companies and help them grow so that they can also provide better cell service and then we the people will have a choice, NOT TO GET SCREWED.
Verizon, you are going to be the reason that a lot of time is going to be wasted in your stores because of processing numerous returns and a lot of Fed Ex charges on you for people retuning your trash items…unless you want to get it right the first time and or BECOME AMERICAN again and restore the 30 day policy.
Verizon’s 4G network and or MOTO products still have so many bugs in them that you might as well keep your 3G and wait for another year or so until they fix everything and stop their devious, deceptive tricks, restore the 30 day policy and start selling products that work out of the box. Verizon, you wouldn’t be the first large company that is going to fall if you keep doing this kind of business. See yea on the news.
One comment for Moto: Do you really want to associate yourself with a company that treats their customers like this? I guess Birds of a feather flock together…and get shot together.
Yours Truly,
One very, very, VERY angry customer
There, I helped you out so that a few people would at least read it. As it was, I doubt anyone would trudge through that WALL of text.

Hi, I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all

== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
Hi,
I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all temp files used by Firefox, and open the previously cached page, it displays it correctly, but upon refreshing/reloading it again shows the previous version of the page maintained in the cache.
== Troubleshooting information
==
HTML5: Application Caching
.style1 {
font-family: Consolas;
font-size: small;
text-align: left;
margin-left: 80px;
function onCacheChecking(e)
printOutput("CHECKINGContents of the manifest are being checked.", 0);
function onCacheCached(e) {
printOutput("CACHEDAll the resources mentioned in the manifest have been downloaded", 0);
function onCacheNoUpdate(e)
printOutput("NOUPDATEManifest file has not been changed. No updates took place.", 0);
function onCacheUpdateReady(e)
printOutput("UPDATEREADYChanges have been made to manifest file, and were downloaded.", 0);
function onCacheError(e) {
printOutput("ERRORAn error occured while trying to process manifest file.", 0);
function onCacheObselete(e)
printOutput("OBSOLETEEither the manifest file has been deleted or renamed at the source", 0);
function onCacheDownloading(e) {
printOutput("DOWNLOADINGDownloading resources into local cache.", 0);
function onCacheProgress(e) {
printOutput("PROGRESSDownload in process.", 0);
function printOutput(statusMessages, howToTell)
* Outputs information about an event with its description
* @param statusMessages The message string to be displayed that describes the event
* @param howToTell Specifies if the output is to be written onto document(0) or alert(1) or both(2)
try {
if (howToTell == 2) {
document.getElementById("stat").innerHTML += statusMessages;
window.alert(statusMessages);
else if (howToTell == 0) {
document.getElementById("stat").innerHTML += statusMessages;
else if (howToTell == 1) {
window.alert(statusMessages);
catch (IOExceptionOutput) {
window.alert(IOExceptionOutput);
function initiateCaching()
var ONLY_DOC = 0;
var ONLY_ALERT = 1;
var BOTH_DOC_ALERT = 2;
try
if (window.applicationCache)
var appcache = window.applicationCache;
printOutput("BROWSER COMPATIBILITYSUCCESS!! AppCache works on this browser.", 0);
appcache.addEventListener('checking', onCacheChecking, false);
appcache.addEventListener('cached', onCacheCached, false);
appcache.addEventListener('noupdate', onCacheNoUpdate, false);
appcache.addEventListener('downloading', onCacheDownloading, false);
appcache.addEventListener('progress', onCacheProgress, false);
appcache.addEventListener('updateready', onCacheUpdateReady, false);
appcache.addEventListener('error', onCacheError, false);
appcache.addEventListener('obsolete', onCacheObselete, false);
else
document.getElementById("stat").innerHTML = "Failure! I cant work.";
catch (UnknownError)
window.alert('Internet Explorer does not support Application Caching yet.\nPlease run me on Safari or Firefox browsers\n\n');
stat.innerHTML = "Failure! I cant work.";
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729; .NET4.0E)
== Plugins installed
==
*-Shockwave Flash 10.0 r45
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Google Update
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object
Thanks & Regards,
Kandarpa Chandrasekhar Omkar
Software Engineer
Wipro Technologies
Bangalore.
[email protected]
[email protected]

We have had this issue many, many times before including on the latest 3.6 rev. It appears that when the applicationCache has an update triggered by a new manifest file, the browser may still use only its local network cache to check for updates to the files in the manifest, instead of forcing an HTTP request and revalidating both the browser cache and the applicationCache versions of the cached file (seems there is more than one). I have to assume this is a browser bug, as one should not have to frig with server Cache-Control headers and such to get this to work as expected (and even then it still doesn't sometimes).
The only thing that seems to fix the problem is setting network.http.use-cache to false (default is true) in about:config . This helps my case because we only ever run offline (applicationCache driven) apps in the affected browser (our managed mobile apps platform), but it will otherwise slow down your browser experience considerably.

Some Serious Bugs in Multicam

Why has nobody fixed these major bugs? Makes the multicam feature Complete **** and unusable.
I have 3 cameras on a wedding shoot. Synced em all up using PLural Eyes, make a multicam sequence and dropped it in there. Enabled multicam. So not only does the audio not work only (only left channel), but the multicam is completely full of crap! My third camera wasn't on the whole time, it was short clips. So whenever my third camera would shut off, the fricken multicam desides to always switch to the default camera as soon as the third camera goes off. Who the heck would do that? Causes more problems. Not only this, but if my third camera goes off, the video display goes red and DISABLES my choice, I can't switch to a second camera! Why would I want to switch to my second camera? Well my third camera went off, which by defualt, the multicrap decides to go to defualt camera, which happens to be the third camera, so it goes to a blank screen! and the multicrap outlines a red box which disables my camera and I cant choose another camera until the third camera comes back on! What balony crap coding nonsense is this?

I am not having this issue. ever.
and i even don't always have continuous video in the default track, i've just edited a concert shot with 4 cameras, all of them turned off sometimes due to various reasons, but no trouble to sync them, so i had holes in all 4 video tracks,
i just went back to the project to try to reconstruct your "bug" and failed to get the multicam to stop.
maybe you might try it without plural eyes?
maybe you might try reading this?: http://help.adobe.com/en_US/premierepro/cs/using/WSC29F4BF4-C2EA-4ad5-879E-778C2740A768.ht ml
emin3m33 wrote:
are you serious? or are u a serious amatuer? I can list at least 25 reasons why. But I cant list one reason why adobe would lock my choice from choosing a camera.
and maybe you might think about being nice to people, you're expecting help from,
so you might also want to try reading this:
http://forums.adobe.com/thread/414764#
good luck with your wedding edit and make sure to try Jim&Jeffs suggestion.

Serious bugs in the SR400 gated photon counter LabVIEW drivers

Hi
I am developing an application with SR400 and came
across what I think is a bug in the LabVIEW driver. Essentially, none
of the VI's allow you to set the preset counters. For instance, if you
call Read VI and choose mode A, B for preset T, there is no way to
specify preset T, which means that the count period defaults to some
factory default, not a situation you want. This might also explain some
of the timeouts some people are getting to SRQs that come later.
Further,
if you look at the block diagram of Read VI, the line selector string
is set to "CM 0" for two distinct choices of the count mode. This is a
serious bug. I do not know who wrote this driver, but it does seem, at
least to me, that they did a rather shoddy job of it. How this driver even got certification to be posted at IDN is something I cannot explain.
Comments welcome from those that use LabVIEW with SR400 and have used this driver.

Hi. Dwell time of 2ms is good for me. It would be great if you can send me this file to circumvent the 2000points/measurement. Also, If i understand it right, if I set the Gate to CW, then my gate should always be open for the count period, they why do I have to set the gate parameters at all. I want to change the integration time, but for some reason I am not able to change it in your setup 2.VI at all. I made some changes in setup 2.vi. I removed the setting for channel B as I am not going to use it and I integrated the readchannel.vi into this file. I am not sure if I made a mistake in doing this. Now, I am able to write some data to a file, but I not as I want. If it helps, I am uploading my modified VI file and an example data file (Gate A width is 0.992s, Gate A delay and delay step are 0, Gate A mode is CW, Dwell time is 0.002s).
Attachments:
SR400-V.vi.vi ‏125 KB

Serious Bugs

Hi Tim/Klaus.
I'm posting this here in the hopes that it will get a bit more attention than is being paid in Metalink. I've run into several serious bugs that need addressing:
1) If there are xml-special characters in the data coming from the database (e.g. an '&') then, according to the people at Metalink, I'm supposed to escape them. That's an unacceptable answer. I expect the parser to do that for me. That's why I bought it.
2) When using CVS as an output type, if a null value comes back from the database nothing is emitted into the output stream. For example, if I have 3 columns A, B, and C, if column B is null the jar's emit:
A,C
instead of
A,,C
which means I have to wrap every column in nvl(...) calls.
3) In the documentation it specifically states that you can dynamically append a WHERE clause to a query using PL/SQL functions (BI Users Guide, Part# B40017-01, page 4-32). I cannot get it to work and so I submitted a report to Metalink. They're answer was "we don't think that this can be done". The WHY is it in the User Guide???
4) CSV output sends out files with an extension of .txt which means you have to take extra steps to get the data into Excel (ok, so that one isn't too serious :)
5) When I configure the SSO server to use WNA (which I have gotten to work) when I try to launch the Word plugin and login, the server throws a 500 misconfigured error. It works if I don't use the SSO server.
6) The $CURRENT_SERVER_URL problem
These are causing us real headaches. Can anyone answer some of these questions?
Dave

Dave please seperate your questions into different threads because they are unreleated issues. Also, be sure to search the forum for solutions vs posting. It will save everyone sometime.
Thanks,
Ike
1) Special characters should be removed, however, I don't know what your doing. By the way a parser doesn't remove anything, it parses.
3) Lexical paramters in where clauses in bi publisher enterprise 5.6.2 work like you would expect them to (like reports 6i), however bi publisher in the e-business suite they do not work as expected and lexicals are not treated by value. It's completly backwards since you would expect the functionality to work in 11i. With that being said, I don't know what your doing in your report. The functionality works.

Serious bugs in 10.6.4 with trash and permissions

Similar Messages

Maybe you are looking for