Serious problem!!

I've been using the same apple ID for many years but I've stopped using the email address used for it so I decided to update it to my current email, I did this but now however when I try to sign in on my iPad it says 'this apple ID has not yet been used in the iTunes store please review your account" I followed the prompts but it just took me to a pop up that said I must enable cookies and click 'from visited' I've done that but every time I try to sign in it just tells me the same things. Please help!!

this is exactly the same issue I am havng. it is a shame there are no answers to it.

Similar Messages

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
== URL of affected sites ==
http://www.hotmail.com

We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

What do i do ? My i phone 4 has no option to reduce the motion picture. It is causing me a serious problem. Can anyone please help ?

After several attempts to get some help from Apple, it has become clear to me that my i phone 4 has no options within accessibility to reduce the motion picture.
I have a serious problem with the new software but unfortunatly i cannot go backwards with this update. Apple for obvious reasons will not advise any downgrading options. Can anyone please help me? Is there a third party option here. I do not want to pay for a new phone or replace the i phone as i run a mac,desktop and i pad... !! Thank you.

Giansh2006 wrote:
I don't quite understand why you have asked me about why I'm keeping my URL secret?
It's only that I'm not clear why you are reluctant to post it. If you have a podcast in the iTunes Store then it's there for the world to see - they might search on its subject or title, for example, even if they don't actually know about it from you. If you look at other posts in this forum you will see that usually people post their URLs and then I can examine the feed and hopefully find out from that what the problem is. Without this information no-one can give you anything more than wild guesses.
If you are still reluctant to post the details and want to have a bash at diagnosing the problem yourself you may find my web pages helpful:
How do I make a podcast?
how to diagnose a podcast feed
Why don't my podcast episodes show the podcast image?

Serious problems including battery overheating

My dad and I both bought Revolutions and have had the same issues with our phones (listed below). We truly believe that the LG Revolution is a defective phone - what are the odds that we would both get "lemons"? While at the Verizon store on 3/13, the store, corporate customer service, and LG claimed to not be able to do anything for us except send us refurbished phones or return our phones to LG and have them worked on (HA. Seriously? Go without a phone? We don't have a land line anymore - might as well dump us on a deserted island). We were notified today, 3/15 that the phones were in the store ready to pick up, but they didn't come with new batteries! SERIOUSLY?!?! THE MAJOR ISSUE WITH BOTH IS THE BATTERY OVERHEATING! These phones are bound to either burn us or kill us. We don't want someone else's "fixed" phone, because it will just do the same thing! Unless Verizon will help us, I'm afraid we are going to get iPhones from another provider, as well as go to the BBB to file a formal complaint. I really don't want to, but I can't believe how much we have spent for our little death machines. We really hope Verizon will cooperate and uphold the standards they set forth in their employee handbook. We would love to be contacted by someone who can help. Please, don't give us the run-around. As anyone can see, factory resets, changing settings, etc. don't work. We have put up with those suggestions for months with no improvement.
My Dad's Revolution:
Bought LG Revolution ~July 3, 2011 for $250 + taxes & fees, car charger, (and eventually extra chargers). Over $300 total put in.
Battery gets overheated to the point that the phone is too hot to touch. This drains the battery from any percentage of battery to 0% in a matter of minutes. FIRE HAZARD IN YOUR POCKET! My dad's chest was almost burned! If it is too hot to touch on the outside, what is it doing to the guts of the phone?!
Not receiving text messages and picture messages that are sent
Internet doesn’t work properly - only when it feels like it
Loses data connection between 3G/4G/Wireless
Not always getting voice mail notifications
Phone burned up 2 wall chargers
Freezing
Phone is ringing, but the “answer call” screen doesn’t come up, so there is no way to answer the call
Phone rings once and then shows a missed call. When calling the person back, they say it rang the normal number of times before going to voicemail.
Not keeping a charge
Called sister next door and Dad could hear them, but she couldn't hear him. He called back and he could hear her fine, but she said he was very "scratchy" - keep in mind this is NEXT DOOR.
My Revolution:
Bought LG Revolution ~July 9, 2011 for $250 + taxes & fees, (eventually, multiple) car charger(s), insurance plan, (eventually, additional wall chargers) $400+ for the total cost
Battery gets overheated to the point that the phone is too hot to touch. This drains the battery from any percentage of battery to 0% in a matter of minutes. FIRE HAZARD IN YOUR POCKET! My thigh has almost been burned! If it is too hot to touch on the outside, what is it doing to the guts of the phone?!
Paying for “Unlimited Data” and phone constantly says “Mobile Network State: Disconnected”
Not receiving text messages and picture messages that are sent
Not being able to send text messages or picture messages
Getting the same text 3-4 times
Sending a text once and recipient getting it 3-4 times
Internet/apps don’t work due to no data
Loses data connection between 3G/4G/Wireless
Not always getting voice mail notifications – getting voice mails 14+ days late. This creates a serious problem for time sensitive messages.
Phone burned up 4 wall chargers and 2 car chargers
Freezing
Phone is ringing, but the “answer call” screen doesn’t come up, so there is no way to answer the call
Not keeping a charge. On a daily basis between 7:30am-12:30pm, I go from 100% to 20%. In the store on 3/13, the Verizon rep witnessed my phone go from 81% to 68% in about an hour
Phone rings once and then shows a missed call. When calling the person back, they say it rang the normal number of times before going to voicemail.
In the beginning, I would get email notifications and after I would read them, it would appear that they were “marked as read”, however, after I back out of the program, it notifies me of the same emails that I just read, only they’re once again “unread”. Now, I’m not getting ANY notifications of email except in the top drop-down screen, which if I click on it, I can see the emails, but after I back out, they disappear because the program decides not to work.
GPS is unreliable. It often says that I'm 2+ miles away from where I actually am.
The phone does what it wants to do when it wants to do it – not when you tell it to! All of our previous phones have given us reliable, clear service. What is wrong with this picture? HELP!!!

Hi I recently had the same problem with the LG Revolution. In fact it had been one of multiple replacement models that I had received in just a few weeks. The first two devices I had problems with them recycling power, I would make calls and they would make the same call multiple times i.e I would get through to the person I was intending on calling and the phone would call them on like a three way call asking me to merge the conversation I was only having with one other person... The 2nd replacement only lasted a few days. I was playing Words with Friends it gave me a sim error out of nowhere shut down. I checked the card after removing the battery and powered it back up. I was fine for about 10 minutes shut down and I was never able to turn it on again. The next phone they sent I received a few day ltr was the frosting on the cake. As soon as I tried to set it up the problems began. The phone was recycling power so much that it wouldn't fully power up before shutting down. Tech support insisted it had to be the battery, that there was no way they sent me 3 bad phones within 2 1/2 weeks... The new battery was sent over night. So I charged it up and gave it a go. It seemed fine at first, but then started acting up again. I resorted to it wasn't the battery and figured when I got to a land line or another line I would call Tech support. I was driving the phone was in my right lower scrub pocket apparently because of whatever mechanical defect it had overheated and burned me. I have been kind of at a loss when it comes to the Customer Service Dept. I have reported the incident to them even called to find out who to send my co pay bills too, no response. However they did have the nerve to send me a text asking for the device back or they were going to charge me $500. Now I'm thinking may be if people started taking things like this to the media they would act on it...

HT6154 Having SERIOUS problems with iOS 7.1 on my iPhone 4S!!!!

I am having SERIOUS problems here. Let me give you a rundown:
I have to reboot my phone (or turn it off and on again) to see the correct battery percentage (but I'll address that in a second), and once I reboot it or bring it back up again, it has to restart itself (in the middle of use) about 3 or 4 times before it stays on consistantly; all the while reading the percentage of battery it remembers from the last reboot. Now, about the battery percentage: I restarted it before I charged it last night and it read 16% -mind you, after it had to shut itself down and restart 3 times. I put it on the charger all night, and it still read 16%...but I decided to run a battery cycle (charge it all the way up, and drain it all the way down) to see if that would help. Sad to say, it did not help; infact it made things worse. It now flip-flops in between the Apple boot-up symbol and a black screen when plugged up to a charger or a computer. The computer cannot read the phone being plugged in so I cannot do a manual restore from iTunes.
Best yet, I upgraded to 7.1, and had the SAME EXACT PROBLEMS I AM HAVING NOW. I did a complete restore of my phone, and even set it up as a brand new iPhone, not even a restore from the last iCloud backup, and just loaded all my content from my Mac...and the problems decided to follow -even after the fresh restore.
I'm toying with the idea that it may be a hardware problem, but I would love to know if anyone is experiencing the same issue.
I have no idea what to do... please help.
I use my phone for business constantly, and almost cannot do my job without it.

ok well seeing that your are having major issues with the battery and the loading screen it is a hardware issue. reseting it wont help that at all. what you need to do is take it to apple and let them look at it. They can tell you what is wrong with it and how much it would be to fix it ( if it is possible your situation is really bad) but if its not they might give you a discount if you give the iphone to them.

Lookout OPC Client – Asynchronous I/O and Update Rate serious problems (Sequence of data)

I am using the Lookout OPCClient driver to connect to AB PLCs (EtherNet/IP protocol) and power measurement equipment (Modbus TCP protocol). The OPC server is the NI OPC Servers. The data that are read out from PLCs and PMs are energy meter readings, energy counters, power, voltage, current, frequency, power factor and el. energy quality measurements (THD). That energy meter readings are being stored in SQL database.
I am experiencing a serious problem regarding the accuracy of the meter readings. Several times per day, randomly, meter readings are losing the time sequence. For example, sequence is: 167, after few seconds 165, 166. In other words, present value followed by two previous old values. That generates a serious problem in our application that is expecting a naturally rising sequence of counter values.
Analyzing further, I isolated the problem to the connection between Lookout OPCClient and OPC Server. I made a simple application in Lookout 6.7 (opcproc.lkp, attached) with OPCClient parameters: NIOPCServers, OPC2, Asynchronus I/O, Update rate: 10000, Deadband: 0.0, that is reading just one tag from NI OPC Servers demo application (simdemo.opf).
By using OPC diagnostic tool from NI OPC Servers I record the sequence of OPC requests and responses. I found out that OPCClient sends every 2.5 sec “IOPCAsyncIO2::Refresh2()” call that is request for refreshing of all items in one OPC group. Few milliseconds later OPC Sever responds with callback function “IOPCDataCallback:: OnDataChange()(Device Refresh)” that actually refresh the data.
This periodic sequence is intrinsic to the OPCClient and cannot be disabled or changed (by my knowledge). This sequence is periodically interrupted by “IOPCDataCallback:: OnDataChange()” caused by update rate parameter of OPCClient (client is subscribed to server for periodic update of changed items).
In the case of demo application on every 4 refresh callbacks caused by refresh requests (2.5 sec) there is one update subscription callback determined by Update rate (10 sec).
QUESTION 1:
What is the purpose of update sequence and update rate when we have every 2.5 sec fresh values?
PROBLEM
The problem arises when we have a large number of items in OPC group. In that case the OPC Server starts to queue refresh requests because they cannot be fulfilled in 2.5 sec time because of large number of I/O points that must be scanned. At the same time update subscription callbacks are running at the period determined by Update rate. I observed in my production system that regular update callbacks has higher priority than refresh callbacks from the queue. That causes the loosing of timed sequence of data. After the update callback with fresh data, sometimes follow one or two refresh callbacks from queue with old (invalid) data. By adjusting Update rate parameter (1 hour, 2hours …) I can postpone the collision of data refreshes but I cannot eliminate it. Furthermore, the 2.5 sec automatic refresh are large burden for systems with many I/O points.
QUESTION 2:
Is there a way to disable automatic refresh request every 2.5 sec and just use update requests determined by Update rate?
QUESTION 3:
Is there a way (or parameter) to change the period of automatic refresh (2.5 sec)?
This problem is discovered for Lookout 6.5, 6.6 and 6.7 so I could say it is intrinsic to OPCClient. If I use synchronous I/O requests there is not an automatic refresh, but that is not an option for large systems.
Thanks!
Alan Vrana
System engineer
SCADA Projekt d.o.o.
Picmanova 2
10000 ZAGREB
CROATIA
T +385 1 6622230
F +385 1 6683463
e-mail [email protected]
Alan Vrana
SCADA Projekt d.o.o.
ZAGREB, Croatia
Attachments:
opcproc.zip ‏4 KB

The physical connection from LV to the switch is (I believe) copper crossover to fiber converter into a switch. Then, fiber from the switch to the end device (relay). The relay has all of the typical modbus registries and has been verified by inducing signals in to the system and measured/polled in LabVIEW and observed Variable Monitor. I am working with LV 8.2 and 8.5.
An OPC server would only add an additional translation of addressing within the configuration. The only real draw back would be the network overhead required to do this processing and not being representative of the end design configuration.
I will reiterated my question in another way:
I must answer the question to management that relates to data collection, test results and analysis; how often are you polling the client in relation to the outcomes measured? At this time I can not point at any configuration in the set up and execution that directs the data framing rate. I only measure the traffic and work with results. This needs to be clearly identified based on the relay modbus/tcp design capability of supporting an fixed number of client requests per second.
For testing purposes, I would like to be able to stress the system to failure and have prove capabilities with measured data. The present problem is that I have no basis to establish varying polling rates that effect the measured data transmission.
This raises another question. What handles the Variable Monitor data requests and how is this rate determined?
Thanks for your interest in my efforts.
Steve

"Serious problem has occurred" when exporting

I'm using CS3 and when I export my movie as avi, or as flv, or wmv, or anything, it says "A serious problem has occurred that requires Adobe Premiere Pro to shut down."
I just finished putting this movie together and am trying to export it for the first time. I opened my other movies and tried re-exporting and they worked fine. Can someone help me?
My email is [email protected]

>uses the same video formats and audio formats
Well... what ARE they?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
How many hard drives, and how much free, defragmented space?
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Serious problem with my iPod Classic/iTunes

I have a 6th Generation iPod classic (80 GB), and recently, I have been having some serious problems with it.
When I connect it to iTunes, there is usually no problem, it shows up, plays and displays the music correctly, etc. However, if I try to ADD any music to it, iTunes will freeze, then close, and within 5 minutes, my entire computer will freeze completely, and be shut off. For whatever reason, happen when my iPod finally disconnects because my computer turned off, all of my music is missing from the library (This doesn't happen every time it freezes, because I try to disconnect my iPod manually before everything freezes). The music is still on the iPod, (it says that I have XX.X GB of "other" instead of music/videos), but it doesn't show up. When I plug in my iPod, iTunes says that there was a problem and I need to restore it. The first time this happened, I lost over 5,800 songs, but I forgave Apple, because these things do occasionally happen, plus I had no idea what exactly went on. The SECOND time happened within the same week, after I had put 800 songs back on the restored iPod. The first time happened when I was using iTunes 10 (which is seriously buggy on my computer, and freezes often), so I switched to iTunes 9 (still buggy, but doesn't freeze quite as much), and the same thing happened. So now I'm thinking it's my iPod's fault. My iPod does a whole host of minor problems over time such as making certain songs cut off at a certain specific point for no reason (Always the same song, always the same cut off point, and I can't fast forward past it, I also can't delete the songs because if I highlight them on iTunes, iTunes will freeze, and if I find them under the music folder in iPod control, my computer will freeze), freezing the entire iPod for seemingly no reason, and somehow messing up my album artwork (it will appear as "Colourful Static"), along with alot more.
I know this is a troublesome problem, but if anyone could somehow shine some light on this problem, it would be tremendously appreciated.
Thank you
-Eric Luna

Unfortunately, when a hard drive starts clicking that means it's going bad. The mechanism is having trouble reading the drive. Since the iPod is mostly just a harddrive and a battery I have a feeling that this is your problem.
watch this video. http://www.youtube.com/watch?v=wMm6c3fr-fU
about 25ss in is where the clicking starts. If it sounds like that, but softer and more muffled since it is a smaller drive that is being enclosed then I think you might be SOL. Maybe if you're iPod is still under warranty you can get a credit and go for a touch and avoid moving parts all together?

Serious problem with blackberry 9300 Curve handset and denial from BB to replace the same, under warranty.

Dear Blackberry Authorities,
It is really a horrible experience with the handset of blackberry for me. I have purchased blackberry Curve handset 9300 on 22nd April from a "Phone Store”, Shop No.78,79,community centre, New friends colony, New Delhi, The Invoice No. is 319,The details of the handset are as follows:
Handset: Blackberry Curve 9300 1256-India Qwerty-Pink
Name: Blackberry 9300: ETA-716/2010/WRLO
Model: RDA71UW
It has been more than just three months ,when i purchased this handset ,It worked fine for about only fifty days from the date of purchase and from the second month ,to my shock, serious problem started in the handset and some time it was getting hanged ,sometime some keys in the keypad did not work ,some time it was getting hanged the moment I receive incoming call., sometime sms sending problem, some time some other problem ..Every time I used to switch off the phone and start again, then it used to work but after some days again there were some other problem occurring in the handset.
The phone was not getting connected to PC from the starting, and i have tried so many times but i fail to get success.
Many a times when I used t send sms the entire alphabet typed on sms has gone separately as a single alphabet in a particular sms to the recipient, causing embarrassment for me in my organization. I would blame the black berry for this embarrassment as this has caused due to faulty phone they have sold me,
I am service class person and i get occupied with my work at office in the day hours and doesn’t have time to go to the service centre of blackberry every time the problem occurs, as there are only one service centre available in Delhi at Lajpat Nagar.The service centre is about 20 Kilometers away from the area my office is situated, I managed to keep the phone running by switching off and switching on after one or two minutes, every time the problem occurs but in the first week of last month ,when the problem started continuing after switching off and switching on also ,I was bound to go to service centre at noida since it is close to my place (about 14 Km) in comparison of Lajpat nagar at new delhi,the service engineer at blackberry service centre saw my phone and said there is some software problem which can be rectified by reinstalling the software, and there are some hardware problem also (some keys on the keypad is not et. all working) ,for which i have to surrender my phone to them and they will send it to the Blackberry Office (they did not give address) and it would take 15 days at least ,thus since I had no back up phone and my each and every contact no. was there in phone it was difficult for me to give them handset at that time ,so I requested them to rectify the software problem by re installing the same.
I asked the service manager to get the backup of all the data and contact no saved into the phone, but they refused to do so and they asked me to go to some other shop nearby to get the data backup, I went to that shop and they asked 250 Rupees for data backup of my phone. I was bound to say yes to them for the amount the charge for backup .I gave them my handset and after 20-30 minutes they came back to me by saying, we cannot store your data backup as it is not connecting to PC. It was a highly disappointing reply for me.
Then i again went to your service centre and written down some important contact no.(the number which was stored on phone book) on piece of paper and taken out my SD card ,and gave them handset for re installing the same.
They gave me my handset after one and half hour and said" now it would work fine except hardware problem.".I came back and to my utter shock again after two three days handset was into its old condition ,then also I tried to manage with handset and when i could spare sometime I went to your service centre again on 24th July at Noida,
they took the phone and said it would take 12-15 days to return the handset after rectifying the problem,when i requested them to change the handset with a new handset which is at least in good working condition , they clarified that if the hardware problem is not manageable or repairable ,i would get new handset had no option except to give them handset for rectifying the problem.
Now,It is the time for a biggest shock from blackberry people-Today on 3rd August ,i have received a call from noida blackberry service centre to inform me that my handset cannot get repaired under standard warranty conditions of blackberry as there are some moisture into the phone and there is no warranty if there is a moisture inside the phone.
Thus now i wish to inform all the concerned ,Blackberry/Research in Motion ,managers/authorities ,that i have explained above ,all the things ,happened to me in last three months of my purchase of handset, in detail ,so i would again request to Blackberry/Research in Motion ,managers/authorities, to rectify the problem of my handset or change the entire handset so that I can use the same peacefully and should not roam around the service center of blackberry.
Giving this lame excuse that "there is a moisture inside the handset and thus it can’t get repaired or changed under warranty " is a clear case of cheating and harassing the customer, I have bought the handset to use it for my communication purpose not to roam around the blackberry service center nor to put water or moisture inside the handset and play with the handset and fight with all of you.
If there were some moisture inside the handset then that should have been seen by the noida service centre people also during my First visit itself by them and they would have refused taking the handset for repair. They did not refuse but accepted handset and reinstalled software also, If there was some moisture that would have been seen by them that time only.
In my second visit also the took my phone and seen the inside condition also of handset in front of me ,they did not see any moisture, that time also ,and now after 10 odd days ,there are some moisture inside the phone??????.
I have no idea how blackberry keeps its handset ,which has come to them for repairing ,but if there is any trace of moisture into my handset ,that would have come into the handset ,during these 10 days only when phone was with blackberry authorized service engineers for repair purpose. What I know is that My Blackberry handset is under warranty and it is not working properly thus it should be replaced by Blackberry.
On the keypad if some key are not working that is a hardware problem which was there in the handset and it has no connection with the moisture.
If this is the way blackberry is treating its customer, i would say it is harassing its customer, and does not want to rectify the problem .in this case, I would have no option left except to go to the consumer court in Indian judiciary system. And moreover i would inform my and other friends, organizational employee also not to use services/or buy blackberry handset if this is the way BB is treating its customer.
I would request all the concerned persons/managers/authorities of Blackberry/Research in Motion, take action into my case urgently and rectify the core problem into my handset instead of giving lame excuses, and change the faulty handset of mine with a new properly working handset under warranty condition.
Best Regards
Asim
Edit: Personal information removed. At no time should you provide any personal information to any other community member. Please review the Community Terms & Conditions and Support Community Guidelines for additional information.

dubem747 wrote:
It looks like your phone has a some virus, use your computer to scan and remove it.
not possible for it to have a virus and a PC would not know how to scan the OS as its protected
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

My computer has some serious problems, my iphoto only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos has a large delta with a question mark. also I can't back up

my computer has some serious problems, my iphoto only shows only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos had a large delta with a question mark. also I can't back up the library file because its not there. I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place. I also lost my Idvd file, only have broken chain showing.

Details please
What version of iPhoto and of the OS?
i tried to rebuild my files from folders that had the pics in them.
Exactly what did you do and how did you do it? this ay be the cause of your issue but without details we can n=ony guess
my iphoto only shows only shows thumb size pics when I try to open them,
where do you see htis? In the iPhoto window? what does "try to pen them" exactly mean?
originally all the photos had a large delta with a question mark.
Ok - this usually has a simple solution - do you still have a copy of the library that has this problem?
also I can't back up the library file because its not there.
This makes no sense at all - all of your previous statements indicate that you do have an iPhoto library but have some problems with it
By default your iPHoto library is located in your Pictures folder and is named iPhtoo library - if tha tis not the case the you have moved or renamed it and only you know what you did until you tell us the details
I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place.
Again unless you actually share what and how you are doing thing but continue to simply state abstract problems it is no possible to assist you - details on using Time Machine are here -- http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US -- and -- http://pondini.org/TM/FAQ.html ---
I also lost my Idvd file, only have broken chain showing.
This would be better addressed in the iDVD forum - but again unlesss yu share detailed information no one can assist
LN

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Looking for some VPN advice on c7200 and possible serious problem

Hi all,
I am looking for some advice on how to figure out few things.
customer has a c7200 with VPN module and seen the following
15.2(4)M4, RELEASE SOFTWARE (fc2)
Vpn7# Show crypto isakmp sa
Exemple: x.x.x.x y.y.y.y QM_IDLE 14020 ACTIVE ( repeated around 700 times)
Vpn7# IKE-Session : 2517 active, 5120 max, 3169 failed
Hardware Encryption : ACTIVE
Number of hardware crypto engines = 1
CryptoEngine VAM2+:7 details: state = Active
Capability : IPPCP, DES, 3DES, AES, RSA, IPv6, FAILCLOSE, HA
IKE-Session : 2800 active, 5120 max, 3169 failed
DH : 55 active, 5120 max, 0 failed
IPSec-Session : 1628 active, 10230 max, 0 failedhe would like to know whether these messages allude to some kind of serious problem or show the normal operation of vpn routers. because they need to analyse their business related incidents and do prevent actions
therefore if someone could give give me some advice if there is any problem with the hardware i would greatly appreciate it
thanks in advance
Lance

I'd make sure to read the contract and any associated fine print really, really carefully before doing this. But back to your question - this is more of a marketing question and I'd suggest hiring a good marketer (or become one) to make the most of this opportunity.
And how do you find a good marketer?
I'd suggest using Seth Godin (http://sethgodin.typepad.com/) as your guide/model. If the person you want to hire knows and follows Seth's good marketing advice, you'll likely do very well. If they don't know who Seth Godin is and are obsessed with SEO rankings and email blasts, I'd be very worried (that's not to say SEO rankings and email blasts are "wrong" but that they shouldn't be the only options in your marketing approach).
Good luck!

A serious problem with AAR 5.0 in printing out a book

I have written a book in MS Word 2000 and I converted it in a PDF file with AR 5.0
Then I tried to print it out as a book.
I rotated the pages and included two A4 pages in one so that an A4 sheet to have 4 pages on both sides.
In order to do this trick, I rotated the horizontal text page
to vertical position on the left side for printing out the page 1 and on the right side for printing out the page 2. This must be done in order to have the 4 pages printed out in a sequence and in an A4 sheet.
The procedure is as follows:
First, I print out the page one (1) while having my PDF text page rotated vertically on the left side and the printing out is successful.
Then I rotate again the page vertically to face on the right side to print out the page two (2) in the same sheet.
Here is where the problem begins.
The page 1 is printed out well BUT its top/bottom margin is different than the page 2, which is printed in a lower position on the A4 sheet.
The margins all around the page look perfect but the two of them are printed out with one line lower that makes one page higher or lower than the other and not in a straight line as it is supposed to be.
I have tried to find out what causes this problem with no success so I am into contact with you requesting an immediate help. I know that it is a small but serious problem particularly for my case as an author and I believe that the solution can be given only by an expert of Adobe Acrobat 5.O
Please, inform me about any adjustment that must be done to solve this margin situation (problem) as I know that AAR 5.0 is an excellent software and can do this work for me.
Regards,
Emmanouel

This has nothing to do with Adobe's OpenType development tools, which is the purpose of this forum. I think you need to post this in the Acrobat Windows forum!
Regards,
T

Serious problem of jdbc-mysql connectivity using tomcat

hi everybody
i m in serious problem since last 15-20 days. i m trying hard to make the connection jdbc-mysql using tomcat with the help of a jsp test page but every time i am facing almost the similar probems listed below in detail:
to make sure that the jdrivers's .jar (mysql-connector-java-3.1.7-bin.jar) available for such connections working fine i have tried the above said connection without using tomcat....which is working fine...for this i have created a dummy database with a dummy table ..and written some queries in the .java file of my code which upon running inserts the specified values in the defined(dummy) database.
this is the confirmation that the classpath etc..are ok in regard to the mysql-connector-java-3.1.7-bin.jar
now i have placed a copy of this .jar file in to the commons/lib directory of the tomcat web server(which is suppossed to be the place for such external jars)
after doing so i have followed 2 methods :
method 1st:........
i have made aone more jar file from the following .java file....
import javax.naming.*;
import javax.sql.*;
import java.sql.*;
public class TestSQLLoad
String user = "Not Connected";
String pwd = "no pwd";
int id = -1;
public void init() {
try{
Context ctx = new InitialContext();
if(ctx == null ) {
throw new Exception("Boom - No Context");
DataSource ds = (DataSource)ctx.lookup("java:comp/env/jdbc/TestDB");
if (ds != null) {
Connection conn = ds.getConnection();
if(conn != null) {
user = "Got Connection "+conn.toString();
Statement stmt = conn.createStatement();
String q = "select name, password, id from user";
ResultSet rst = stmt.executeQuery(q);
if(rst.next()) {
user=rst.getString(1);
pwd=rst.getString(2);
id = rst.getInt(3);
conn.close();
}catch(Exception e) {
e.printStackTrace();
public String getUser() {
return user;
public String getPassword() {
return pwd;
public int getID()
return id;
after compiling it at the cmd prompt i made a .jar file from the .class of it and named it MySQLLoad.jar...then i placed it also in to the commons/lib directory where the mysql-connector-java-3.1.7-bin.jar was already placed.
then i have changed the server.xml and web.xml files from the conf directory of the tomcat as given here:
server.xml



<Server port="8005" shutdown="SHUTDOWN">

<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>


<Service name="Catalina">

<Connector
port="80" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />


<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />

<Engine name="Catalina" defaultHost="localhost">
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<Context path="/testdb" docBase="TOMCAT_HOME/webapps/tomcat-docs/testdb"
debug="5" reloadable="true" crossContext="true" >
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_DBTest_log." suffix=".txt"
timestamp="true"/>
<Resource name="jdbc/TestDB"
auth="Container"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/TestDB">
<parameter>
<name>factory</name>
<value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>10</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>5</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>10000</value>
</parameter>

<parameter>
<name>username</name>
<value>root</value>
</parameter>
<parameter>
<name>password</name>
<value>mysql</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>com.mysql.jdbc.Driver</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:mysql://localhost/testdb?autoReconnect=true</value>
</parameter>
</ResourceParams>
</Context>
</Host>
</Engine>
</Service>
</Server>
and the other xml file i.e
web.xml is here:
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
<servlet>
<servlet-name>default</servlet-name>
<resource-ref>
<description>DB Connection</description>
<res-ref-name>jdbc/TestDB</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
<servlet-class>org.apache.catalina.servlets.DefaultServlet</servlet-cl ***>
<init-param>
<param-name>debug</param-name>
<param-value>0</param-value>
</init-param>
<init-param>
<param-name>listings</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>invoker</servlet-name>
<servlet-class>
org.apache.catalina.servlets.InvokerServlet
</servlet-class>
<init-param>
<param-name>debug</param-name>
<param-value>0</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet>
<servlet-name>jsp</servlet-name>
<servlet-class>org.apache.jasper.servlet.JspServlet</servlet-class>
<init-param>
<param-name>fork</param-name>
<param-value>false</param-value>
</init-param>
<init-param>
<param-name>xpoweredBy</param-name>
<param-value>false</param-value>
</init-param>
<load-on-startup>3</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>invoker</servlet-name>
<url-pattern>/servlet/*</url-pattern>
</servlet-mapping>

<servlet-mapping>
<servlet-name>jsp</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>jsp</servlet-name>
<url-pattern>*.jspx</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>30</session-timeout>
</session-config>
<mime-mapping>
<extension>abs</extension>
<mime-type>audio/x-mpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>ai</extension>
<mime-type>application/postscript</mime-type>
</mime-mapping>
<mime-mapping>
<extension>aif</extension>
<mime-type>audio/x-aiff</mime-type>
</mime-mapping>
<mime-mapping>
<extension>aifc</extension>
<mime-type>audio/x-aiff</mime-type>
</mime-mapping>
<mime-mapping>
<extension>aiff</extension>
<mime-type>audio/x-aiff</mime-type>
</mime-mapping>
<mime-mapping>
<extension>aim</extension>
<mime-type>application/x-aim</mime-type>
</mime-mapping>
<mime-mapping>
<extension>art</extension>
<mime-type>image/x-jg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>asf</extension>
<mime-type>video/x-ms-asf</mime-type>
</mime-mapping>
<mime-mapping>
<extension>asx</extension>
<mime-type>video/x-ms-asf</mime-type>
</mime-mapping>
<mime-mapping>
<extension>au</extension>
<mime-type>audio/basic</mime-type>
</mime-mapping>
<mime-mapping>
<extension>avi</extension>
<mime-type>video/x-msvideo</mime-type>
</mime-mapping>
<mime-mapping>
<extension>avx</extension>
<mime-type>video/x-rad-screenplay</mime-type>
</mime-mapping>
<mime-mapping>
<extension>bcpio</extension>
<mime-type>application/x-bcpio</mime-type>
</mime-mapping>
<mime-mapping>
<extension>bin</extension>
<mime-type>application/octet-stream</mime-type>
</mime-mapping>
<mime-mapping>
<extension>bmp</extension>
<mime-type>image/bmp</mime-type>
</mime-mapping>
<mime-mapping>
<extension>body</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>cdf</extension>
<mime-type>application/x-cdf</mime-type>
</mime-mapping>
<mime-mapping>
<extension>cer</extension>
<mime-type>application/x-x509-ca-cert</mime-type>
</mime-mapping>
<mime-mapping>
<extension>class</extension>
<mime-type>application/java</mime-type>
</mime-mapping>
<mime-mapping>
<extension>cpio</extension>
<mime-type>application/x-cpio</mime-type>
</mime-mapping>
<mime-mapping>
<extension>csh</extension>
<mime-type>application/x-csh</mime-type>
</mime-mapping>
<mime-mapping>
<extension>css</extension>
<mime-type>text/css</mime-type>
</mime-mapping>
<mime-mapping>
<extension>dib</extension>
<mime-type>image/bmp</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
<mime-mapping>
<extension>dtd</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<mime-mapping>
<extension>dv</extension>
<mime-type>video/x-dv</mime-type>
</mime-mapping>
<mime-mapping>
<extension>dvi</extension>
<mime-type>application/x-dvi</mime-type>
</mime-mapping>
<mime-mapping>
<extension>eps</extension>
<mime-type>application/postscript</mime-type>
</mime-mapping>
<mime-mapping>
<extension>etx</extension>
<mime-type>text/x-setext</mime-type>
</mime-mapping>
<mime-mapping>
<extension>exe</extension>
<mime-type>application/octet-stream</mime-type>
</mime-mapping>
<mime-mapping>
<extension>gif</extension>
<mime-type>image/gif</mime-type>
</mime-mapping>
<mime-mapping>
<extension>gtar</extension>
<mime-type>application/x-gtar</mime-type>
</mime-mapping>
<mime-mapping>
<extension>gz</extension>
<mime-type>application/x-gzip</mime-type>
</mime-mapping>
<mime-mapping>
<extension>hdf</extension>
<mime-type>application/x-hdf</mime-type>
</mime-mapping>
<mime-mapping>
<extension>hqx</extension>
<mime-type>application/mac-binhex40</mime-type>
</mime-mapping>
<mime-mapping>
<extension>htc</extension>
<mime-type>text/x-component</mime-type>
</mime-mapping>
<mime-mapping>
<extension>htm</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>hqx</extension>
<mime-type>application/mac-binhex40</mime-type>
</mime-mapping>
<mime-mapping>
<extension>ief</extension>
<mime-type>image/ief</mime-type>
</mime-mapping>
<mime-mapping>
<extension>jad</extension>
<mime-type>text/vnd.sun.j2me.app-descriptor</mime-type>
</mime-mapping>
<mime-mapping>
<extension>jar</extension>
<mime-type>application/java-archive</mime-type>
</mime-mapping>
<mime-mapping>
<extension>java</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<mime-mapping>
<extension>jnlp</extension>
<mime-type>application/x-java-jnlp-file</mime-type>
</mime-mapping>
<mime-mapping>
<extension>jpe</extension>
<mime-type>image/jpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>jpeg</extension>
<mime-type>image/jpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>jpg</extension>
<mime-type>image/jpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>js</extension>
<mime-type>text/javascript</mime-type>
</mime-mapping>
<mime-mapping>
<extension>jsf</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<mime-mapping>
<extension>jspf</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<mime-mapping>
<extension>kar</extension>
<mime-type>audio/x-midi</mime-type>
</mime-mapping>
<mime-mapping>
<extension>latex</extension>
<mime-type>application/x-latex</mime-type>
</mime-mapping>
<mime-mapping>
<extension>m3u</extension>
<mime-type>audio/x-mpegurl</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mac</extension>
<mime-type>image/x-macpaint</mime-type>
</mime-mapping>
<mime-mapping>
<extension>man</extension>
<mime-type>application/x-troff-man</mime-type>
</mime-mapping>
<mime-mapping>
<extension>me</extension>
<mime-type>application/x-troff-me</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mid</extension>
<mime-type>audio/x-midi</mime-type>
</mime-mapping>
<mime-mapping>
<extension>midi</extension>
<mime-type>audio/x-midi</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mif</extension>
<mime-type>application/x-mif</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mov</extension>
<mime-type>video/quicktime</mime-type>
</mime-mapping>
<mime-mapping>
<extension>movie</extension>
<mime-type>video/x-sgi-movie</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mp1</extension>
<mime-type>audio/x-mpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mp2</extension>
<mime-type>audio/x-mpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mp3</extension>
<mime-type>audio/x-mpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mpa</extension>
<mime-type>audio/x-mpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mpe</extension>
<mime-type>video/mpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mpeg</extension>
<mime-type>video/mpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mpega</extension>
<mime-type>audio/x-mpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mpg</extension>
<mime-type>video/mpeg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>mpv2</extension>
<mime-type>video/mpeg2</mime-type>
</mime-mapping>
<mime-mapping>
<extension>ms</extension>
<mime-type>application/x-wais-source</mime-type>
</mime-mapping>
<mime-mapping>
<extension>nc</extension>
<mime-type>application/x-netcdf</mime-type>
</mime-mapping>
<mime-mapping>
<extension>oda</extension>
<mime-type>application/oda</mime-type>
</mime-mapping>
<mime-mapping>
<extension>pbm</extension>
<mime-type>image/x-portable-bitmap</mime-type>
</mime-mapping>
<mime-mapping>
<extension>pct</extension>
<mime-type>image/pict</mime-type>
</mime-mapping>
<mime-mapping>
<extension>pdf</extension>
<mime-type>application/pdf</mime-type>
</mime-mapping>
<mime-mapping>
<extension>pgm</extension>
<mime-type>image/x-portable-graymap</mime-type>
</mime-mapping>
<mime-mapping>
<extension>pic</extension>
<mime-type>image/pict</mime-type>
</mime-mapping>
<mime-mapping>
<extension>pict</extension>
<mime-type>image/pict</mime-type>
</mime-mapping>
<mime-mapping>
<extension>pls</extension>
<mime-type>audio/x-scpls</mime-type>
</mime-mapping>
<mime-mapping>
<extension>png</extension>
<mime-type>image/png</mime-type>
</mime-mapping>
<mime-mapping>
<extension>pnm</extension>
<mime-type>image/x-portable-anymap</mime-type>
</mime-mapping>
<mime-mapping>
<extension>pnt</extension>
<mime-type>image/x-macpaint</mime-type>
</mime-mapping>
<mime-mapping>
<extension>ppm</extension>
<mime-type>image/x-portable-pixmap</mime-type>
</mime-mapping>
<mime-mapping>
<extension>ppt</extension>
<mime-type>application/powerpoint</mime-type>
</mime-mapping>
<mime-mapping>
<extension>ps</extension>
<mime-type>application/postscript</mime-type>
</mime-mapping>
<mime-mapping>
<extension>psd</extension>
<mime-type>image/x-photoshop</mime-type>
</mime-mapping>
<mime-mapping>
<extension>qt</extension>
<mime-type>video/quicktime</mime-type>
</mime-mapping>
<mime-mapping>
<extension>qti</extension>
<mime-type>image/x-quicktime</mime-type>
</mime-mapping>
<mime-mapping>
<extension>qtif</extension>
<mime-type>image/x-quicktime</mime-type>
</mime-mapping>
<mime-mapping>
<extension>ras</extension>
<mime-type>image/x-cmu-raster</mime-type>
</mime-mapping>
<mime-mapping>
<extension>rgb</extension>
<mime-type>image/x-rgb</mime-type>
</mime-mapping>
<mime-mapping>
<extension>rm</extension>
<mime-type>application/vnd.rn-realmedia</mime-type>
</mime-mapping>
<mime-mapping>
<extension>roff</extension>
<mime-type>application/x-troff</mime-type>
</mime-mapping>
<mime-mapping>
<extension>rtf</extension>
<mime-type>application/rtf</mime-type>
</mime-mapping>
<mime-mapping>
<extension>rtx</extension>
<mime-type>text/richtext</mime-type>
</mime-mapping>
<mime-mapping>
<extension>sh</extension>
<mime-type>application/x-sh</mime-type>
</mime-mapping>
<mime-mapping>
<extension>shar</extension>
<mime-type>application/x-shar</mime-type>
</mime-mapping>
<mime-mapping>
<extension>smf</extension>
<mime-type>audio/x-midi</mime-type>
</mime-mapping>
<mime-mapping>
<extension>sit</extension>
<mime-type>application/x-stuffit</mime-type>
</mime-mapping>
<mime-mapping>
<extension>snd</extension>
<mime-type>audio/basic</mime-type>
</mime-mapping>
<mime-mapping>
<extension>src</extension>
<mime-type>application/x-wais-source</mime-type>
</mime-mapping>
<mime-mapping>
<extension>sv4cpio</extension>
<mime-type>application/x-sv4cpio</mime-type>
</mime-mapping>
<mime-mapping>
<extension>sv4crc</extension>
<mime-type>application/x-sv4crc</mime-type>
</mime-mapping>
<mime-mapping>
<extension>swf</extension>
<mime-type>application/x-shockwave-flash</mime-type>
</mime-mapping>
<mime-mapping>
<extension>t</extension>
<mime-type>application/x-troff</mime-type>
</mime-mapping>
<mime-mapping>
<extension>tar</extension>
<mime-type>application/x-tar</mime-type>
</mime-mapping>
<mime-mapping>
<extension>tcl</extension>
<mime-type>application/x-tcl</mime-type>
</mime-mapping>
<mime-mapping>
<extension>tex</extension>
<mime-type>application/x-tex</mime-type>
</mime-mapping>
<mime-mapping>
<extension>texi</extension>
<mime-type>application/x-texinfo</mime-type>
</mime-mapping>
<mime-mapping>
<extension>texinfo</extension>
<mime-type>application/x-texinfo</mime-type>
</mime-mapping>
<mime-mapping>
<extension>tif</extension>
<mime-type>image/tiff</mime-type>
</mime-mapping>
<mime-mapping>
<extension>tiff</extension>
<mime-type>image/tiff</mime-type>
</mime-mapping>
<mime-mapping>
<extension>tr</extension>
<mime-type>application/x-troff</mime-type>
</mime-mapping>
<mime-mapping>
<extension>tsv</extension>
<mime-type>text/tab-separated-values</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<mime-mapping>
<extension>ulw</extension>
<mime-type>audio/basic</mime-type>
</mime-mapping>
<mime-mapping>
<extension>ustar</extension>
<mime-type>application/x-ustar</mime-type>
</mime-mapping>
<mime-mapping>
<extension>xbm</extension>
<mime-type>image/x-xbitmap</mime-type>
</mime-mapping>
<mime-mapping>
<extension>xht</extension>
<mime-type>application/xhtml</mime-type>
</mime-mapping>
<mime-mapping>
<extension>xhtml</extension>
<mime-type>application/xhtml</mime-type>
</mime-mapping>
<mime-mapping>
<extension>xml</extension>
<mime-type>text/xml</mime-type>
</mime-mapping>
<mime-mapping>
<extension>xpm</extension>
<mime-type>image/x-xpixmap</mime-type>
</mime-mapping>
<mime-mapping>
<extension>xsl</extension>
<mime-type>text/xml</mime-type>
</mime-mapping>
<mime-mapping>
<extension>xwd</extension>
<mime-type>image/x-xwindowdump</mime-type>
</mime-mapping>
<mime-mapping>
<extension>wav</extension>
<mime-type>audio/x-wav</mime-type>
</mime-mapping>
<mime-mapping>
<extension>svg</extension>
<mime-type>image/svg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>svgz</extension>
<mime-type>image/svg</mime-type>
</mime-mapping>
<mime-mapping>
<extension>vsd</extension>
<mime-type>application/x-visio</mime-type>
</mime-mapping>
<mime-mapping>

<extension>wbmp</extension>
<mime-type>image/vnd.wap.wbmp</mime-type>
</mime-mapping>
<mime-mapping>

<extension>wml</extension>
<mime-type>text/vnd.wap.wml</mime-type>
</mime-mapping>
<mime-mapping>

<extension>wmlc</extension>
<mime-type>application/vnd.wap.wmlc</mime-type>
</mime-mapping>
<mime-mapping>

<extension>wmls</extension>
<mime-type>text/vnd.wap.wmlscript</mime-type>
</mime-mapping>
<mime-mapping>

<extension>wmlscriptc</extension>
<mime-type>application/vnd.wap.wmlscriptc</mime-type>
</mime-mapping>
<mime-mapping>
<extension>wrl</extension>
<mime-type>x-world/x-vrml</mime-type>
</mime-mapping>
<mime-mapping>
<extension>Z</extension>
<mime-type>application/x-compress</mime-type>
</mime-mapping>
<mime-mapping>
<extension>z</extension>
<mime-type>application/x-compress</mime-type>
</mime-mapping>
<mime-mapping>
<extension>zip</extension>
<mime-type>application/zip</mime-type>
</mime-mapping>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
</web-app>
after all this i have taken a jsp page whose code is here:
(the mysql database used is named as "testdb" and the table name is "user" which is having fields name,password and id)
<html>
<head>
<title>DB Test</title>
</head>
<body>
<%
TestSQLLoad tst = new TestSQLLoad ( );
tst.init();
%>
<h2>Results</h2>
User <%= tst.getUser() %>
Pwd <%= tst.getPassword() %>
Id <%= tst.getID() %>
</body>
</html>
and placed it in to the Tomcat 5.5\webapps\tomcat-docs\testdb directory and saved as test-db.jsp
when i run this page on the browser i get a lot may errors stating
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
Generated servlet error:
TestSQLLoad cannot be resolved or is not a type
An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
Generated servlet error:
TestSQLLoad cannot be resolved or is not a type
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.4 logs.
AND NOW WHEN just to get rid of such errords i try to include a statement
<%@ page import="pkg.TestSQLLoad" %> in the jsp page code (and also place the MySQLLoad.class file in a folder called pkg and place it in the same directory where the jsp page is )and make it look like
<html>
<head>
<%@ page import="pkg.TestSQLLoad" %>
<title>DB Test</title>
</head>
<body>
<%
TestSQLLoad tst = new TestSQLLoad ( );
tst.init();
%>
<h2>Results</h2>
User <%= tst.getUser() %>
Pwd <%= tst.getPassword() %>
Id <%= tst.getID() %>
</body>
</html>
now when i run it i get the following errors:
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
Generated servlet error:
Only a type can be imported. pkg.TestSQLLoad resolves to a package
An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
Generated servlet error:
TestSQLLoad cannot be resolved or is not a type
An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
Generated servlet error:
TestSQLLoad cannot be resolved or is not a type
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
in response to the above error i have even tried placing the MySQLLoad.class directly in the testdb folder along with the jsp page without keeping it in a package named pkg and then importing directly as <@page import="MySQLLoad" %>
that too gave me the following errors
org.apache.jasper.JasperException: Unable to compile class for JSP
Generated servlet error:
The import TestSQLLoad cannot be resolved
An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
Generated servlet error:
TestSQLLoad cannot be resolved or is not a type
An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
Generated servlet error:
TestSQLLoad cannot be resolved or is not a type
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
and if i do not use the statement <%@ page import="MySQLLoad"%> then also i get the errors like
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 11 in the jsp file: /testdb/test-db.jsp
Generated servlet error:
TestSQLLoad cannot be resolved or is not a type
An error occurred at line: 11 in the jsp file: /testdb/test-db.jsp
Generated servlet error:
TestSQLLoad cannot be resolved or is not a type
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
THE 2nd Method:
in my second method i did the same changes in the web.xml and server.xml
then i took a jsp page with the following code:
<%@ page import="javax.sql.*,java.sql.*,javax.naming.*,com.mysql.jdbc.*" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML>
<HEAD>
<TITLE> trial doc </TITLE>
</HEAD>
<BODY>
<h1>Trial Document</h1>
<% InitialContext context=new InitialContext( );
DataSource dataSource=(DataSource) context.lookup("java:comp/env/jdbc/testdb");
Connection conn=dataSource.getConnection();
Statement stmt=conn.createStatement();
ResultSet rset=stmt.executeQuery("select * from user");
if (rset.next()){
%>
<table width="100%" border="1">
<tr align="left">
<th>name</th> <th>password</th><th>id</th>
</tr>
<%
do {
%>
<tr><td> <%=rset.getString(1)%> </td>
<td><%=rset.getString(2) %></td>
<td><%=rset.getString(3) %></td></tr>
<%
} while (rset.next());
%>
</table>
<%
} else{
%>
No results from query
<%
rset.close();
stmt.close();
conn.close();
context.close();
%>
</BODY>
</HTML>
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 15 in the jsp file: /testdb/Big1.jsp
Generated servlet error:
The type Connection is ambiguous
An error occurred at line: 15 in the jsp file: /testdb/Big1.jsp
Generated servlet error:
The type Statement is ambiguous
An error occurred at line: 15 in the jsp file: /testdb/Big1.jsp
Generated servlet error:
The type ResultSet is ambiguous
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
org.apache.jasper.compiler.Compiler.compile(C

thanx for ur response
as u said that the problem is more of a jsp page not getting compiled....
me also pointed towards the similar situation providing all the surrounding situations
which i have met and gone through
i m still thinking that problem may b in the tomcat's server.xml and web.xml as well
so better if u plz guide me in that regard
regards,
kuldeep

HELP ME I have a serious problem on my macbook pro HELP ME

I have a serious problem on my macbook pro, after I made this tutorial this link:http://tonymacx86.blogspot.com/2010/01/tweaking-your-system-install-chameleon.ht ml, I could no longer install windows on mymacbook pro, already tried everything, according to my knowledge. already formatted, re-formatted, reset EFI, PRAMetc., nothing worked. Ever tried installing on different operating systems, versions of Windows 32 and 64 also, nothing worked.I'm sure that something strange aocnteceu after this tutorial I did,because before I was usually running windows on my mac. The error appears to me is: "Can not partition this drive because some files can not be removed." Sometimes I can go, but time to install windows and choose the partition BOOTCAMP, I get a message saying that the exclamation windows can not be installed on this partition, but maybe my BIOS is not supportedfor this installation. PLEASE HELP ME I'M DESPERATE AND NOT KNOW WHAT TO DO MORE. WAIT HELP
RICARDO

I did not know that the chameleon installation was just for Hackintosh, was lack of attention, my bad!!! I will try your method now. In a moment I'll tell you if it worked.
"My hd"> library> preferences> SystemConfiguration>com.apple.Boot.plist: This way is correct?????
Content of my "com.apple.Boot.plist:
<? xml version = "1.0" encoding = "UTF-8"?>
<! DOCTYPE plist PUBLIC "- / / Apple / / DTD PLIST 1.0 / / EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key> Kernel Flags </ key>
<string> </ string>
</ dict>
</ plist>
NOTE: When I did that tutorial I do not modify this file "com.apple.Boot.plist"
Wait reply.. Tks !!!

Apple Have Serious Problems With 10.7.5

Apple have very serious problems with their software and they do not have the courage to openly admit this to their customers. My company has been dedicated to Apple and all that is good. We have 2 Imacs, I macbook Pro, 1 mac Mini, 1 mac mini server, 1 ipad, 4 iphones and peripheries. I am on the verge of placing them all on a heap and putting a sledgehammer to them all because I am certain that 10.7.5 is such a corrupted release that even Apple technicians cannot help. My company has been on more and more get around fixes that are becoming more and more complicated by the minute. For the last 4 weeks I have been working 8 to 8 daily including some of the weekends to try and fix things. I have had the pleasure (genuinely) of working for two days following a knowledgeable Apple Technicians instructions to resolve a cloud issue and as of today I sit with one imac completely unusable with all sorts of errors and malfunctions - all software based. Other symptoms on other hardware include error messages saying the computer restarted due to a problem with the computer - even though we are carrying out clean shutdowns or restarts; inconsistent acceptance of passwords to i cloud on most equipment but in particular as highlighted above; nearly all applications opening on restart (I do know how to shut that off - in theory!!!!!!!); frequent and very lengthy beachballs; keychain is an absolute mess, slowdowns to the extent that I have to work on three machines to get the minimum of work done; and other random malfunctions or error messages. Apple's positive attitude to its customers used to be second to none. It seems to me that software (and hardware) releases are now too rushed and Apple do not care about software failures but rely on customers to troubleshoot the glitches for them and do so under warranty or more likely care plan support at further cost to the customer.
Just look at all the questions being asked by customers via web searches on the above issues and more. Lots of questions, no reliable fixes, and certainly no interest shown by apple to resolve the issues - in fact Apple have adopted the say and do nothing approach.
I love the products and have been a loyal ambassador to Apple but now my stress level, and the inability of my company to engage its business put me on the verge of taking every item my company owns with an Apple logo and at least gaining some satisfaction by placing them all in a heap and smashing the lots with a sledgehammer (deliberate repeat as this is now a realistic option)
It used to be a pleasure to use the products, and efficient. I am not looking for help on these matters as an Apple technician is working very hard with us but I feel he is as frustrated as us. We are nowhere nearer resolving our problems and almost daily there are other glitches emerging.
Apple are losing their way. They must listen to the directions given them by their customers frustrations.

What happens when you click the button?

Serious problem!!

Similar Messages

Maybe you are looking for