Serivice pack 1???

Hi all
I have crappy Windows Vista 32bit and just updated to Service Pack 1, (what a joke)
Anyway when I use to open up any image the default use to be my PSCS3, Now I have patched to the Service Pack 1 the default is Microsoft Picture manager.
So I right clicked on the image, chose open with>choose a default program and at the top Photoshop was not their just Paint, Picture Viewer etc.
So I clicked on browse c:\Programs>Adobe>Photoshop CS3>Photoshop (the Photoshop icon at the very bottom). Then highlight the icon, Photoshop appears in the file name, then pressed open but absolutey nothing happens.
I go back into the other programs and recommended programs but Photoshop is not their and my images still load in Microsoft Picture Mangaer.
However if I open up PSC3 normally it is perfect
Can any help
Thankyou josel

In Vista there is a program labeled Default Programs. I think you can use this to do what you want.

Similar Messages

  • BAPI_ALM_ORDER_MAINTAIN is suddenly creating Repair Order Reservations

    Hi,
    I am seeing a Material Reservation getting created for a Follow-Up Material on a Service Repair Order when using the function module BAPI_ALM_ORDER_MAINTAIN. We have a Custom application that uses this BAPI and it seemed to be working fine until last week when we applied a Serivice Pack. I think it has to do with the Parent Material is desiganted as a Discontinued Item in the Material Master and has the Material as a Follow-up Material value. I am just curious as to why this was working prior and if anyone knows that this might have been changed in the Service Pack and if maybe there is an OSS nOte that might apply or if this is just STD SAP logic?

    solved deleting some implemented by customizing
    and re-create there check by program

  • SAP GUI 7.20 vs Business Objects Enterprise SP3

    Hi all,
    Does anybody know if BOE XI 3.1 SP3 supports SAP GUI 7.20???? I read the doc and it doesnt says so...but i think it should support it....

    Supported means that this was tested when SP3 was released and that if you run into issues using SAP GUI 7.20 combined with BO then you should expect support from SAP.
    I believe that SAP GUI 7.20 was released later than BO XI 3.1 SP3 so I assume this is the reason why there is no support statement.
    I would recommend to open an OSS message by SAP support (http://service.sap.com/message) and ask if there is a plan to support SAP GUI 7.20. Personally  I count with a supportability statement for the next XI 3.1 serivice pack.
    SAP GUI 7.20 may work with the BO products but until SAP officially supports it you are working at your own risk with this configuration.
    Regards,
    Stratos

  • After Effects Rendering Problem and RAM Preview Problem

    I posted a question about this yesterday but I thought I would repost it with more detail!
    I have a restless issue here with rendering and RAM preview. I am simply trying to create a viral ad which uses the cloning effect I achieved with masking for my college coursework and I have completed the process of creation but I have ran into problems. The RAM preview will only play up to a certain point then it will just stop and this effects the final render because it gets to the point in the rendering where the RAM preview stops and then a message will pop up saying the rendering has failed or something? (Screenshots Below)
    I have tried RAM previewing just one of the three videos I am using and it still stops at the same point.
    I am using .avi files and have tried converting to .mov, .mp4, .wmv all of which didn't work.
    I am using After Effects CS4 ver 9.0.0.346
    My computer specs
    AMD SEMPRON processor 2.7Ghz (single core)
    2GB RAM (I know its not alot ;))
    ATI Radeon HD 5600 512mb
    Creative audigy 2 sound card
    Windows XP Serivice Pack 3
    It's quite urgent and I hope someone can help!
    Cheers!

    With just 2GB of RAM, I'm impressed that you can generate that much of a RAM preview.  RAM previews use RAM. When they run out, they stop.
    Have you tried rendering the clip using the Render Queue.  If so, does it also report an error at a similar point?  If it renders correctly from the queue, you're done.  If it doesn't, you probably have a corrupt source file.

  • HP touchsmart win vista system recovery

    I do not have internet connection. So my question is can I do a system recovery to factory state without being connected to the internet? Now my printer hung up while I was installing it, because I didn't have an internet connection. so I had to turn off my computer. the printer prints ok. but I bought netgear 300 wifi boost and it undid something . i cannot get the pc to check for wifi avaiables now. It just opens dialog box and won't click connect to internet. Netgear uploaded from thier gizmo alone. this did not come from the internet cause i don't have internet. Now I don't want internet! I just want Windows vista let me open my programs and uninstall my programs and work fine! Windows Vista keeps telling me I am not the administrator! this is my PC ! I want control of my  own PC not Microsoft or HP or anybody else. If I want to change the registry I should be allowed! or msconfig. This darn Vista won't let me change anything for the better. It won't capture video on the webcam either. I want to control my PC. and if I ever buy a new PC it will be a MAC. Jobs R.I.P. 

    Hello 123redlight:
             Welcome to HP's forum. Wow what a mess. Malware has done some damages. Yes unfortunately you will need Internet connection to do the full factory restore. For at least for several days while it updates. Your computer will need the serivice packs witch are downloaded with the updates. Ounce you have completed your recovery. Your computer will be much easier to set up including your Internet connection and Net Gear as well. Remember Netgear is tricky to set up because it will open up on website. When you set it follow your Net gear directions carefully. Technical support phone numbers are included with Netgear. They will help you install it.
          You can still use the Internet if you choose to. This tool bar will help you protect your computer from attacks. Long as you land on Green website pages. Don't worry it will tell you the safe websites. Bad websites with malware / virus will not open. It is free.http://www.mywot.com/
            Vista computers take a while for updates in order for the computer to run smoothly and faster. Microsoft just released another big batch of updates for Vista computers last week. So I can not say how long you will need to stay on line for up dates. Apple computers are great but they do have down fault side and that is you can only use Apple software on it and you are very limited to what you can do on it. They all so do not get attack as much by virus / malware like Windows computers do.
           When you all so restore your computer set both HP's and Windows Updates to download updates but let me choose witch ones to install. This way you are in control and you do not need to stop working on your computer getting surprise shut downs or messages.
           Do not allow this malware beat you down. With Wot tool bar and your Anti virus / Spyware software you should be in good to go hopefully it will be your last factory restore you will need to do.
          Yes you can remove this attack from your computer but it is very time consuming and can be a pain if it keeps reproducing and renaming its files untill you have located the mother file and deleted it. To do this is by opening up C drive and checking every single file and looking for strange files and dates that they were in stalled. It much faster to a factory restore when you have lost control of your computer as you have.  It's not the computer it's what attacks the computer witch causes this type of issue. Yes it happens to Apple computers as well no where as like Windows computers do.
           Now you know about malware and some times they can be as bad a virus if not worse. frrw.

  • Virtual XP upgrade problem

    Please let me know if I am posting this in the wrong group, I am a recent Mac convert trying to find my way in a new and exciting world.
    I run Leopard and VMware Fusion for a virtual XP machine which unfortunately I need for a couple of things. When trying to install XP Serivice Pack 2 I get: "Setup could not verify the integrity of the file Update.inf. Make sure the Cryptographic service is running on this computer. Anybody able to help, please?

    Welcome to Apple Discussions!
    You may also be able to get help with it in the Boot Camp forum:
    http://discussions.apple.com/category.jspa?categoryID=237
    Even though Boot Camp and VMWare are different engines, if someone has seen this as a software issue, they could be able to help you solve it. Otherwise, I would also check the VMWare usergroups:
    http://www.vmware.com/communities/content/vmug/index.html

  • Connection problems PC Suite - Nokia 6630

    Hi,
    I cannot get connected via Bluethooth to my Nokia 6630.
    My configuration is:
    Nokia 6630
    Widows XP Home Edition Version 5.1 (Build 2600.xpsp_sp2_gdr.050301-1519 : Serivice Pack 2)
    PC Suite 6.80.22
    Bluethooth USB Adaptor Belkin F87001 ver.2.11
    When I check on Nokia PC Suite Help 'about Nokia PC Suite' System info it says:
    Microsoft Windos 2000
    Build 2195
    No service pack installed
    and it also says:
    No supported Bluetooth stack found
    I have no problems using the Bluetooth USB adaptor for other applications.
    The problem with Nokia PC Suite is:
    After installing PC suite, I click on 'get connected' button and get the message:
    'there is no available connection type and therefore the connection to phone cannot be established. The wizard will exit.' If I then press OK I get the message: 'failed to detect available connection. Please reinstall Nokia PC Suite.'
    I have tried to reinstall PC Suite several times but always end up with the same messages.
    I have also run the PC Suite Cleaner 3.3 but still have the same messages.
    What should I do?
    Thanks,
    Andreas

    Hey,
    Dont worry, this is an issue alot of people have. I wrote a quick tutorial on how to do this.
    I understand that you have Service Pack 2 on your Windows XP am I Correct?
    If I am then procede with the tutorial:
    Connecting the Phone to a USB Bluetooth Dongle. Using PC Suite.
    Yesterday, I stayed up all night to figure this out. I called nokia support to see what they can do, and apparently the new drivers from Sitecom (the BT adaptor that I use) creates a "Cloak" over the Microsoft ones. (This is only if you have SP2!!)
    Required for these steps:
    ~PC Running Windows XP on Service Pack 2. (how do I know if I have Service pack 1/2? Go to Start > Controll Panel > Classic View (on the top left corner, or if you already are then ignore this) > System. In system it will say which serivce pack you are running.
    ~PC Suite version 6.80.22 or later.
    ~Bluetooth Adaptor + Drivers for it
    ~Nokia Phone supporting a bluetooth In/Out connection.
    ~Patience (this may take half an hour depending on your PC Spec) (Took me 15 minutes)
    So here is what I did:
    First of all close all programs that you dont need running.
    Start > Controll Panel > Add Remove Programs > Sitecom drivers
    Remove ALL Sitecom (or which ever company's you use).
    Reboot Computer.
    Next put the CD/Floopy in the PC or folder that you downloaded have ready on your desktop, containing the drivers required for your adaptor.
    If a autorun comes up cancel it.
    Plug in your bluetooth adaptor to a permanent usb port! The port you plug it into will be the only and only port that you can run bluetooth from, dont ask me why. So use a good safe place. (I put mine in the back of my PC, not the front.)
    Windows will now say that it has found new hardware. It will ask you if it can search the internet for drivers, click > Yes This Time Only.
    It will search and wont find anything.
    Now it will ask you if it can search for drivers on the PC, click : Yes, and tell it where the drivers are located, CD/Floppy, Folder. eg: E:\Sitecom/drivers/XP
    Let it install. It will finish, then suddenly re-open.
    Run the same step as above again. (dont ask me why..it just installes some more drivers.)
    Finally it will finish and say that your software is ready to be used.
    DONT TRY TO USE IT! THE SOFTWARE REQUIRED ISNT RUNNING YET. DONT RUN PC SUITE EITHER! DONT QUIT PC SUITE, AND DONT TRY TO USE THE CONNECTION MANAGER.
    REBOT the PC.
    Now when you go into PC Suite > Connection Manager, you should find a new connection. In my case:
    Bluetooth (Sitecom)
    and the old bluetooth connection looks like this:
    Bluetooth (Microsoft)
    The connection is very fast and stable. You can browse the phone as if it is cable connected which is awsome. Transfer speed depends on your adaptor, but it averages between 1 - 3 Megabites Per Second.
    Hopefully this works for you too!
    Good Luck,
    Tal
    I own a 5210, 5140 and now..the new 3250. Symbian 60 Series OS 3.0 ..just the best.

  • How can I move an e mail account from one family pack to another

    I have an e mail address (not main family pack e mail address) and I would like to move it to another family pack. Is this possible and if so how?
    Thanks

    Caroline12, Welcome to the discussion area!
    I believe that your question is about a Mobile Me family pack account. If that is true, I believe that the answer is no.
    But your probably should post your question in the Apple.com > Support > Discussions > MobileMe discussion area.

  • Using a copy of the install DVD Family Pack rather than the original?

    I'm going to buy a 5 pack for my brother and his family, however given his track record of losing install disks - can I keep the original and send him a copy? I know making a back-up in allowed under Apple's license but in this scenario I would be keeping the original and sending a copy to someone else. My intent is to safeguard the original, not distribute multiple copies, but would this be considered acceptable under the terms of Apple's license?

    Create the duplicate and send both to your brother. It's time for him to get responsible.

  • HT4436 How can I transfer my odl family pack email to new iCloud id? Or add a new email account (not an alias) to my main icloud id?

    I had a family pack but now I am not able to reach my son's email account. How can I find and transfer it? Or how can I open a new email account for my son through my icloud id. Actually it seems as if there is an oprating email account under his name but e-we cannot receive any emails or cannot reach the account settings...

    Each sub-account of a MobileMe Family Pack should have been individually migrated to iCloud before August 1st last. Assuming that you didn't do this, you should be able to reactivate the address (though not retrieve its previous contents) by signing in with it in System Preferences>iCloud and enabling Mail - your son should do this on his own Mac or his own user account if he is using your Mac. It's not clear whether he will be able to reactivate the @me.com version or only get an @icloud.com version. (It would be useful to know, when he tries it.)
    If he did migrate the account to iCloud then signing in in the same way should retrieve the contents and the @me.com address should work.
    Alternatively he can just create a new Apple ID (for which he will need a new non-Apple email address) if he doesn't already have one, and sign in with that, enabling Mail and choosing a new @icloud.com address.
    You should note that in none of these cases does his account have anything to do with yours (there is no need for a Family Pack equivalent in iCloud as it's free at basic level).
    You could add an email alias to your account, but it's not a good idea as it will mix his emails up with yours and he won't be able to detach it later.

  • Packing Status at Delivery Header

    We are in the process of creating a form that will include the details of the all delivery items packed on a handling unit. We want the output to be triggered automatically when the delivery has been completely packed.
    We created a requirement to look at the packing status at delivery header level.  There is a packing status field (VBUK-PKSTK) at delivery header level  and packing status (VBUP-PKSTA) at item level.
    We did not expect the delivery header level header to change to "C" until all item were "C".  However, the header level field changes to "C" when the first item on the delivery is packed.  I
    I looked through the SAP Notes to see if there was something there to address this, but could not find anything. 
    I then searched the forums and found a message from 2007 saying that you must configure item categories with "must be packed" in order for this to work. I know we do not want to configure our system that way.  We have many sites and most do not use handling units.
    However, before I have my developer add code to check all statuses at item level prior to triggering an output, I want to make sure this is what has to be done.  And I have not missed a note to correct this.
    Thanks in advance.

    HI,
           Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
    Regards,
    Ram Pedarla

  • Install win 8.1 pro pack

    In the process of Adding Features to Win 8.1 with the Microsoft Win8.1 Pro Pack, I was able to install the Microsoft license key - it accepted it, but the last step in the process fails with this error:  "Something went wrong.  Close this wizard and try again."
    I have attempted to reboot and retry, but I get the same error.  Has anyone come up with a fix for this?

    IWalters2001, welcome to the forum.
    This is a problem that will be better solved by Microsoft Customer Service.  They know the product best.  I don't believe that it is a computer component problem.  It could be a compatibility problem.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Window 8.1 Chinese character cannot display properly in a game even though I have downloaded and install all chinese language packs

    Hi,
    The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
    the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
    I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance. 

    Hi,
    The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
    the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
    I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance. 
    Hi,
    Please open Region, under administrative -> Language for non-Unicode programs: choose Chinese.
    Kate Li
    TechNet Community Support

  • Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Error in updating SAP Basis Pack

    Dear All,
    I have fresh Install SAP 4.7 with SQL 2000. When I am updating basis Support pack i.e SAPKB62021.
    It give messege
    Error in Phase :-XPRA_EXECUTION
    Reasion for error :TP_STEP_FAILURE
    Return Code : 0008
    Please help
    Thanks & Regards
    Issam CHIBOUNI

    Dear shok,
    Normally tms was configured i done it before applying patches? but i have some probleme in tms alert viewer:
    Function                              
    Message           
    TMS_WBO_READ_REQUEST                    READ_DOCU_FAILED  
    TMS_TP_SHOW_BUFFER                          TP_REPORTED_ERROR 
    TMS_TP_ADD2BUFFER                           TP_REPORTED_ERROR
    TMS_TP_SHOW_BUFFER                          TP_REPORTED_ERROR
    TMS_TP_SHOW_BUFFER                          TP_REPORTED_ERROR
    TMS_TP_ADD2BUFFER                           TP_REPORTED_ERROR
    TMS_TP_SHOW_BUFFER                          TP_REPORTED_ERROR
    TMS_PS_READ_PROFILE_FROM_DISK               READ_PROFILE_FAILED
    TMS_PS_READ_PROFILE_FROM_DISK               READ_PROFILE_FAILED
    TMS_PS_READ_PROFILE_FROM_DISK               READ_PROFILE_FAILED
    thanks for your help.

Maybe you are looking for