Server 2012 lost permission and share folders

I restart the server and the folder keep with the problem, i have other folder shared in the same location and work good, you think the solution is move all files to a new folder?

Have you tried restarting the "Server" service after rebooting to see if the folder permissions and sharing status come back? If this helps, you can create a script to run at startup to restart that service as a temporary workaround.
Also, I would try creating and sharing another folder in the same parent folder as the problematic folder and see if it retains the permissions and sharing when the server is rebooted. If so and if possible, move contents of the problematic folder into the new folder.

Similar Messages

Server 2012 Standard license and VM license for windows instances

Hi,
A question about VM instances on standard server 2012 license exists here
I cannot link it here as my account is not verified. The topic is titled "Windows Server 2012 Standard License and VMs"
My question is tad different...
If I understand this correctly, 1 windows server standard license provides support for 1 Physical Operating System Environment (The VM Host / POSE) and permission to run 2 Virtual Operating System Environment(VOSE).
Does this imply that I can install 2 additional instances of Windows Server 2012 Standard Edition on the permitted 2 VM instances on the server? Or... should I purchase additional licenses for each VOSE that runs windows?
Does the standard license provide rights to run 2 Virtual instances AND offer install and activation rights for 2 MS windows (virtual) environments AND install and activation rights for the windows host?
If license is require for each instance of server 2012 running on the VM ... can I avoid purchasing additional licenses for operating systems, say, if I run 2 Centos operating system instances in 2 VOSE?
Please help!
Thanks.

Licensing questions should be asked of a trained Microsoft licensing specialist. I haven't seen one of those lurking in this forum. www.microsoft.com/licensing.
That said, licenses are assigned to the physical host, not to VMs. The License you assign to the host grants you the "right to run" addition virtual operating system environments running Windows Server. It does not grant you additional licenses.
Licensing for Microsoft Windows Server operating system is controlled by Microsoft. Licensing for any other operating system is not covered by the virtualization rights of the Windows Server operating system. Therefore, if the CentOS virtual machines
are properly licensed by whoever licenses them, you can run however many instances that license allows.
A single Standard Edition license can be installed on the physical host granting you the right to run up to two virtual instances of Standard Edition. However, if you run additional services, such as file services or Active Directory or IIS, etc.,
on the physical instance, that means you can only run one additional virtual instance of Windows Server.
Free advice is worth every cent.
.:|:.:|:. tim

Is Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.

All I want to know is if Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.
I have been planning and deploying my companies first Windows Server 2012/SQL Server 2012 Always On cluster and Always On Availability Groups Multi-Subnet cluster and instances for SharePoint 2013, and I will be brutally honest, the documentation on either
the MSDN and TechNet leave alot to be desired. Continually finding links in the documentation will take me from a Windows 2012 reference to a page talking about Windows Server 2008 or R2, The differences of which there are so many when it comes to configurations,
settings, roles, services when working with SQL Server 2012. I have been confused, frustrated, screaming mad, with all the misdirection in this documentation. The documentation takes me windows 2008 R2 which is different than 2012!
Tired and trying to pick myself up off the floor!
Greg
Gman

In general, DTC is not required for SQL 2012. But, since you are asking specifically about SharePoint, it would be better to ask in a SharePoint forum. They would be more likely to know those situations where FTC might be needed by SharePoint.
.:|:.:|:. tim

The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality

The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality - The Windows Server Essentials and Small Business Server Blog - Site Home - TechNet Blogs:
http://blogs.technet.com/b/sbs/archive/2015/03/13/the-ms15-10-security-update-for-windows-server-2012-r2-essentials-and-the-client-restore-functionality.aspx
FYI

Hi Susan. I hope there's a better 'fix' coming to replace this "uninstall the updates, restore, then reinstall the updates after the restore". This kind of workaround requires that all of us remember that there's a problem
with KB3023562 and KB3004375 from now until the end of WS2012E. Not sure I'll remember this 6 months from now when the problem crops up during a restore. -:(
Merv Porter
=========================

SQL SERVER 2012 Installed to SMB share Error 59 (An unexpected network error occurred)

I have installed SQL 2012 on a clustered file share. When I try to add space to extend the log file for a database I get the following error
Msg 5149, Level 16, State 3, Line 1
MODIFY FILE encountered operating system error 59(An unexpected network error occurred.) while attempting to expand the physical file '\\server\share\path to ldf file.ldf'
The SQL service is running under a local domain account that does not have administrator rights to the system. The service account does have full disk and share permissions and the service starts without any problems. I have applied all the cluster
hotfixes and all the current Windows Updates. If I log into the system as the SQL service domain user account I can access the share and have full rights to it.
Any help would be appreciated.
Thanks,

The LDF file is 16 GB
Free space on the drive is 62 GB
Expansion is set to 10 percent
I have several instances on this cluster, some are installed to drive letters and others to the clustered file share. The error only occurs on the SQL 2012 instances that are installed to the clustered file share.
I installed them to the clustered file share because I am running out of drive letters in the cluster.

Server 2012 R2 Essentials and Server 2012 Standard

This is for a small business with all of 2 employees. I setup up the domain on the Server 2012 R2 Essentials. We have since found out that one of the applications was over loading the server so he went and bought a different server. Well that server has 2012 Server Standard. I added it to the domain but when I tried to make it a domain controller, I was getting a conflict error with the domain levels. So the question is, what is the best solution to resolve this? My first thought it to just create the domain on the Server 2012 and just blow the old domain. But maybe there is a better way to do it? any ideas?
This topic first appeared in the Spiceworks Community

This is for a small business with all of 2 employees. I setup up the domain on the Server 2012 R2 Essentials. We have since found out that one of the applications was over loading the server so he went and bought a different server. Well that server has 2012 Server Standard. I added it to the domain but when I tried to make it a domain controller, I was getting a conflict error with the domain levels. So the question is, what is the best solution to resolve this? My first thought it to just create the domain on the Server 2012 and just blow the old domain. But maybe there is a better way to do it? any ideas?
This topic first appeared in the Spiceworks Community

SQL Server 2012 Installed KB2793634 and it completed successfully but display error in the event log

Hi
Running SQL Server 2012 with SP1 on Windows 7 x64 SP1
One of the machines that this is installed displayed that the Windows Installer was starting repeatedly, like every 30 secs
I installed KB2793634 and everything completed successfully. No errors in any of the Summary, Detail, etc and all check marks at the end. I went throught the event viewer and in the application log and saw the following
Product: SQL Server 2012 Database Engine Services - Update '{4023B523-7241-4B6D-83A4-92105B0A3DC8}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the
following link for instructions on turning on logging support:
Is this something with the KB. How do I find what the issue is and what do I do to fix it? Or is this a real error?
I brought up SQL Server and the issue that the KB resolves seems to been resolved. I can connect to the instance just fine, the version of the KB has been applied to the instance so now it is at 11.0.3128
Any information will be greatly appreciated.

Hi,
According to the description, I know the patch that was successfully installed after the msiinstaller error.
1. Per
KB304888 and mentioned the possibility that the hotfix was launched a second time after the initial successful update.
I suspect if you have installed any hotfixes or Cumulative updates after installing Service Pack 1 for SQL Server 2012.
Reference:
http://support.microsoft.com/kb/2793634
2. Check the application log. Is the error happening intermittently?
Thanks.
Tracy Cai
TechNet Community Support

Permission to share folders or not - A disscussion

Hi!
I'm about to update my installation to iMS5.2. In this version the "shared folder"-feature is implemented in the webmail client. Earlier I have this feature turned off becourse of the access to a adminserver-port isnt ok.
Now it is in another situation. And if I choose to use this feature, is it reliable? Which attributes set the permission to share a folder etc.?
Thanks in advice

x

Server 2012 R2 DC and File Server on the same server

alexthefourth wrote:
what i plan on doing is running esxi as the hypervisor and running a vm with server 2012 r2 and another server with windows 7 due to a fax application not being able to run on server editions.
You can still run two Windows 2012R2 Servers on Esxi, just like Gary said. For 10 users, it's really not that big of a deal either way.

KOOLER (StarWind) wrote:You're breaking up the whole thing! Virtualize both DC and FS and live your long & happy life!https://technet.microsoft.com/de-de/library/virtual_active_directory_domain_controller_virtualizatio...http://community.spiceworks.com/topic/448752-server-2012-r2-virtual-file-server-best-practiceGood luck :)--is it okay to run a domain controller with dhcp, ad, and dns on the same server? this is mostly due to budget concerns for purchasing a second server 2012 license.
1 License covers two V servers doesn't it? +1

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking and Hyper-V.

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking!
http://www.youtube.com/watch?v=8mOuoIWzmdE
Hi thanks for reading. Now I may well have my terminology incorrect here so I will try to explain as best I can and apologies from the start.
It’s a bit of both Hyper-v and Server 2012R2.
I am setting up a lab with Server 2012 R2. I have several physical network cards that I have teamed called “HostSwitchTeam” from those I have made several Virtual Network Adaptors such as below
examples.
New-VMSwitch "MgmtSwitch" -MinimumBandwidthMode weight -NetAdaptername "HostSwitchTeam" -AllowManagement $false
Add-VMNetworkAdapter -ManagementOS -Name "Vswitch" -SwitchName "MgmtSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "MgmtSwitch"
When I install Hyper-V and it comes to adding a virtual switch during installation it only shows the individual physical network cards and the
HostSwitchTeam for selection. When installed it shows the Microsoft Network Multiplexor Driver as the only option.
Is this correct or how does one use the Vswitch made above and incorporate into the Hyper-V so a weight can be put against it.
Still trying to get my head around Vswitches,VMNetworkadapters etc so somewhat confused as to the way forward at this time so I may have missed the plot altogether!
Any help would be much appreciated.
Paul
Paul Edwards

Hi P.J.E,
>>I have teams so a bit confused as to the adapter bindings and if the teams need to be added or just the vEthernet Nics?.
Nic 1,2
HostVMSwitchTeam
Nic 3,4,5
HostMgmtSwitchTeam
>>The adapter Binding settings are:
HostMgmtSwitchTeam
V-Curric
Nic 3
Nic 4
Nic 5
V-Livemigration
HostVMSwitch
Nic 1
Nic 2
V-iSCSI
V-HeartBeat
Based on my understanding of the description , "HostMgmtSwitchTeam and
HostVMSwitch " are teamed NIC .
You can think of them as two physical NICs (do not use NIC 1,2,3,4,5 any more , there are just two NICs "HostMgmtSwitchTeam and
HostVMSwitch").
V-Curric,
V-Livemigration , V-iSCSI ,
V-HeartBeat are just VNICs of host (you can change their name then check if the virtual switch name will be changed )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Server 2012 Standard License and VMs

Hi,
With one Window server 2012 Standard activated license, I will get 2 VMs. So is there a limit with Windows Server 2012 standard license I can stack and the the number of VMs I can create on one server or across servers (virtual environment). Consider that
all Windows server 2012 standard licenses are activated. If there is no limit on VM creation by add Standard license then why did Microsoft come with Data center licenses with unlimited VMs.
How does the standard license work on Vmware environment. Is there a limit on the number for VMs that we can create.
Please advise me.
Thanks.

If i had one server 2012 standard with its key, i could run it as a vm but not as a virtual host without having the license right?
a single WS2012STD license, allows you to run a server machine (hardware), if that hardware has no more than 2 processors. In this case, you can run 2 VMs, each VM is running WS2012STD. You can also run WS2012STD as the host hypervisor via Hyper-V.
So, that's really 3 OS installations, on the same 2proc machine. The limitation is that the host hypervisor OS is only permitted to do Hyper-V stuff, it's not permitted to use that OS for anything other than hypervisor functions.
If you implement in this way, you would only have purchased a single license for WS2012STD, so you would only have a single key, so you would use that key for the 3 OS installations.
If i bought the single server 2012 standard license, i'd be able to install it as a Host and activate with the key and it'd give me rights to run 2vms on it and for those vms i would have to have 2 keys to activate after installing server 2012 standart
software on them right?
see above.
if you buy via Volume Licensing, things change a little bit due to MAK/KMS keys (it gets a whole lot simpler :)
Sorry for being unclear on the clusters part, i meant HA/failover. we have 2 2008R2 enterprise servers in cluster with shared storage and i was trying to clarify how could i add more vms there.
assuming your failover solution involves traditional server hardware, each failover node is just another hardware machine, so, for each node you have to count up the procs and VMs, just as you would do for non-failover implementations.
if a server is installed and running/executing, it needs to be licensed.
with current configuration, each server is hosting 2vms and if anything happens single host can accommodate all four. I am assuming we have 2 enterprise licenses for them, but if i wanted to run 4vms on each host, we have to buy 2 more enterprise licenses
and install vm togerther with their keys?
There is no Enterprise for WS2012? (WS2012 has STD and DCE)
do you mean as in WS2008R2ENT ?
You can re-assign licenses from one machine to another machine (under the Volume Licensing terms. I'm not sure about Retail terms, you should check that). There are limitations on how often you can reassign licenses (no more than every 90days)
If hardware "fails", you are allowed to reassign the license in a shorter period than 90days.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Server 2012 R2 Essentials and Office 365 Directory Synchronization

I'm in the process of Migrating an on premise Exchange 2013 Environment to Office 365. The environment already has Server 2012 R2 Essentials configured and integrated with Office 365 for Lync. I'm trying to determine best way of setting up the Hybrid Exchange
environment and move to Office 365. From what I've read it appears I need to setup the Office 365 Dir Sync tool. But I'm wondering if I need to break the existing Server Essentials Integration or can I just add configure the Dir Sync tool and go forward with
setting up the Hybrid Environment.
Vincent Sprague

If you are going down this route I would stop using the Essentials Integration and use the full DirSync which does more than the Essentials Integration.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Upgraded from server 2008 r2 to server 2012 r2 standard and nothing is working

I'm actually working on putting together a server using Server 2012 r2 as well, but we tested everything on it prior to launch and are now in the migration phase with only one application not cooperating: Exchange 2010...If you have another functional server running to keep DirSynch going with, would definitely suggest either upgrading something or downgrading another to allow for compatibility issues.We're going to keep using Exchange 2010 on the server it's installed on until we can upgrade it to 2013, otherwise if we moved it while everything else is moving, we will lose email altogether and end up with a lot of angry users...Certainly a lot of compatibility issues regarding server OSes I'm finding in my 1.5 years working here so far... I'm quickly learning the importance of researching these kinds of issues, So hey, welcome to...

Hi Everyone
I am desperate, I have upgraded a server to 2012 and it appears to stop DirSync from running. I can't uninstall the program because it doesn't launch the uninstall program from the control panel. I get an error message
windows.immersivecontrolpanel server execution error
This topic first appeared in the Spiceworks Community

Server 2012 R2, EFI and vSphere 5.1 = Hang during OSD

I'm currently testing Server 2012 R2 deployment via SCCM 2012, on a VMware Virtual Machine.
I've run into an issue where if the VM firmware is set to EFI instead of Legacy BIOS the machine hangs during the Task Seqeunce - the OS image is downloaded and written to disk, the machine reboots to continue with the TS and then hangs at the blue
Windows logo, never to progress any further - screenshot here, same issue with Windows 8:
http://www.cb-net.co.uk/microsoft-articles/34-configmgr/2078-configmgr-windows-8-uefi-and-vmware-esxi-5
ESXi platform is version 5.1, Virtual Machine Hardware Version is 9 - tested with version 8 as well.
Has anyone got this working successfully?
Thanks, Chris
MCTS 70-640 | MCTS 70-642 | Prince2 Practitioner| ITIL Foundation v3 | http://www.cb-net.co.uk

Hi,
Have you checked the log file smsts.log ?
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

WSUS - Server 2012 R2 - Export and Import

Greetings,
I have a Server 2012 R2 system with the WSUS role installed. This server resides on a disconnected network so we must bring updates from an online WSUS server. I have experience performing successful exports and imports in the past with Server 2008
R2 and WSUS 3.0 SP2 (with KB2828185). However, I have yet to get a successful import on Server 2012 R2. The issue I am experiencing comes after what appears to be a successful import. All of the updates show up in the catalog, but none of
the approvals are there. I approve the relevant updates and the number of updates needing files on the status screen increase, but they never verify the content. The individual updates are stuck indefinitely waiting for content with no errors to
be found anywhere. Both servers have identical OS and WSUS configuration. Here is my procedure.
Source Server
- Approve/Decline relevant updates
- Wait for download to finish
- Run Server Cleanup Wizard
- Backup WSUSContent directory using 7-Zip to break into DVD size files
- wsusutil.exe export export.xml.gz export.log (I've tried export.cab and export.gz, neither produces a different result)
- Copy and extract all content to disconnected server.
- Import metadata with "wsusutil.exe import export.xml.gz import.log"
As I said, I get no related error messages in any event log, SoftwareDistribution.log, WindowsUpdate.log, Change.log.
When I've done this in the past with WSUS 3.2, the status dashboard would show all the approved updates that require content and that number would quickly decrease as the system would validate the files in the WSUSContent directory. This is occurring
on both my test server and my live server. I'm confident that I have missed something, but I need help. Anything that anyone can offer would be appreciated.

Hi Wayne,
Before we export and import updates, we should confirm that the settings for express installation files and update languages on the WSUS export server match the settings on the WSUS import server. If these settings do not match, updates will not
be correctly applied.
>> I approve the relevant updates and the number of updates needing files on the status screen increase, but they never verify the content.
Please try to run wsusutil reset.
If issue persists, please check if the WSUS content folder has the proper configuration.
Besides, could you please restart the export WSUS server and export/import again?
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Server 2012 lost permission and share folders

Similar Messages

Maybe you are looking for