Server Issue with Oracle and ASP Connection

We got a new server and are trying to set it up with Oracle Client to allow our web application to connect to the database server. We are getting connection errors, but on the old server, it works fine. We have Windows 2003 and IIS 6.0 on the new server and Win2K and IIS 5.0 on the old server and it's Oracle 8i. Here is the error...
Err.description=Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.
Err.number=-2147467259
... We have the client installed, so not sure what to do from this point on. Can it be some type of a sharing issue, or network firewall issue?

Have you granted the IIS user read & execute access to the %ORACLE_HOME% directory and subdirectories?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

DNS Server Issues with Comcast and Airport Extreme wifi routers

I am having significant challenges with 3 Airport Extreme (latest gen) wifi routers and my Comcast Xfinitity service. It once worked just fine, but now I continually get the blinking amber lights stating "No DNS servers" for each of the Airport Extreme (AE) routers. My configuration is:
Coax cable -> Comcast Xfinity cable modem -> ethernet to 16-port gigabit ethernet switch ->->-> ethernet to 3 Airport Extremes around the house direct connected with switch
I have many wifi devices throughout the house (iPads, MacBooks, home automation devices) as well as direct-connected devices via ethernet (one PC connected to AE router).
Each Airport Extreme router is set with these settings in the Airport Utility app:
Internet tab= Connect using: DHCP
Wireless tab= Network mode: Create a wireless network
Network tab= Router mode: Off (Bridge Mode)
I have attempted to put the Xfinity cable modem in bridge mode, and use the Airport Extreme to serve up the IP addresses, but still lost internet connectivity.
I have also attempted to set the Network tab=> Router Mode to "DHCP and NAT" but get "Double NAT" error issues as well.
I have tried using the Comcast DNS server addresses (75.75.75.75;75.75.76.76) setting on the Internet tab for the routers and do end up getting a green light, but NO internet connectivity.
Lastly, I have tried using the Google DNS servers (8.8.8.8;8.8.4.4) setting on the Internet tab the routers giving me the No DNS servers amber light error and again, no Internet connectivity for either wifi-connected or even ethernet connected (directly to Airport Extreme router) devices (like my PC) despite getting a green light on the router.
Any this point, it really seems that these AE routers are NOT compatible with the Xfinity cable modem or service… (and yes, I've tried power-cycling and restarting the modem, and then the AE routers, MANY times to little avail).
Should I move one of these Airport Extreme wifi routers to before the switch, and have the other 2 in Bridge mode after the switch? Do I need to setup a specific range of DHCP reservation addresses for each different AE router?
Appreciate any insight anyone can share with this aggravating DNS server issue between Comcast & multiple Airport Extreme wifi routers.

I do not see anything wrong with your basic setup.. the issue is indeed the WAN ports of the AE.. AC version are having problems with some network equipment.
You have listed a stack of things you have tried.. but I want you to move the ethernet patch cable you use on each AE to its LAN port instead of WAN.
Restart the airport when you do that.. and then see if it becomes stable.
In bridge mode the airport moves the WAN port to LAN.. but the WAN port setup itself seems more problematic than the LAN ports.
There are other methods we can try if this does not work.. but in the end.. I would be tempted to take the whole lot back to apple.. they need to start making equipment that works with standard modems and switches.
BTW what brand is the 16 port switch?? Does it happen to be managed (smart type)?

Is there an issue with IOS8 and bluetooth connectivity?

I have downloaded IOS8 on my iPhone 5S & 4S, and now am not able to use the bluetooth phone connection in my auto.
Anyone experiencing this same situation?
j.v.fromnc

Does Apple respond to the Support Forum posts?
Is there a pending solution, and what is the timeline? Should I be raising my issues with Acura or Plantronics? I have read that RESET of the phone is a temporary solution. I am not going to reset my phone on a daily basis. The whole reason for iCloud backups is so I don't have to start over with each new device.
I have a business trip this week, and I use my car bluetooth and bluetooth headset heavily. Today I convinced a Best Buy Geek Squad employee to perform a little experiment with my iPhone 6 and iOS8.0.2. We did not try the Plantronic Voyager Legend, because it is my current headset, and does not work. We tried the Bose Series 2 (clearly price does not help compatibility), which did not work. We also tried a Jawbone Era and a $29 something, all without success.
8.0.2 worked until my phone battery died on Saturday.
Even if there are a variety of industry standards for Bluetooth technology, it is unreasonable that Apple excludes such a large percentage of the users market. I know Apple likes a good secret, but could they share enough information with the accessory market?
Why doesn't Apple aim to provide the world most stable operating system, instead of the most changing? I am all for change and innovation. I will even continue to pre-order the latest and greatest Apple product. But change without function or at a loss of function is ridiculous. I had this same experience with the iOS 7 release. I am sure that most of my issues will be resolved by Thanksgiving. Why not rewrite operating systems on a two year cycle, so you can actually test it first? I would appreciate if Apple stopped testing their products on the customers that are the most supportive.
PS This is not the only issue I have found (horizontal keyboard, apps sticking, etc, etc) This is just the issue that is effecting me most directly today. Apple you reputation is suffering. I think I just heard Steve Jobs turn over.

Server issues with Indesign and Photoshop

Hi,
We have recently moved to a Mac OS server for our company, but ever since doing so have started to have problems with our files corrupting. We have since been advised by our IT contractor that Indesign and Photoshop files are now so sophisticated, with the way they access and use their database that it is best not to work on them from a server, as there are too many things that could cause problems with their database in a server situation.
When I heard this, I thought 'surely not' as I know most companies work from a server and I couldn't imagine Indesign and Photoshop wouldn't be robust enough to manage the complexities of a server situation.
Can anyone tell me of similar experiences, or is it more an issue we need to look at with the server itself?
Thank you so much for your help, it is greatly appreicated.
Lydia

People work directly from the server all the time, and sooner or later experience file corruption. It isn't so much that the file is stored remotely as the potential for curruption due to network traffic is very high, particularly if you are making a large number of edits which must constantly be written to the file.
The recommended workflow is to copy the files you need to the local workstation, edit, then copy back to the server.

A lot of problems with Oracle and ASP

Hi, i need to develop a system using ASP and Oracle. I should have started this about 3 weeks ago and I can't in any way connect these 2 technologies.
First, I tried through ODBC and it could not be done.
Next, I tried through OLEDB and when I thought that the problem was found...
set objSessao = Server.CreateObject("OracleInProcServer.XOraSession")
set objConexao = OraSession.DbOpenDatabase("mozart", "jacto_revendas/bolinha",cint(0))
These 2 lines seems to be correct, then I had the error "access to object denied", and I read in some forum that it was because some DLLs of %oracle_home%\bin were without permission. I scanned all of them, and gave full access. OK. Then, an error ASP 0177 (error accessing DLL library) appeared and I could not find solution over the Internet.
And the incredible part is that the error only happens as soon as I start the OS... the second time I try, the script stops and does not show any errors or results... the page keeps processing without an end.
Please, I can't find anyone that can help me... you are my last hope...
thanks
Mozart

I agree with your suggestion about needing more documentation for APS.NET & Oracle connections. And so the next question is who knows where to find such docs? I've scoured the Oracle & MSDN sites, and have found nothing addressing these permission problems -- at least nothing that fixes the problem. See my recent postings about "access denied exceptions". I've been trying for several weeks to get it fixed, w/o success although I think I'm getting closer & just about to give the ASPNET user total control over EVERYTHING in the oracle home directory tree.

Issues with iPhone and Android connecting to Lync 2010?

Our environment currently consists of a single Lync 2010 instance, which is currently performing all roles. The current challenge I'm running into is connectivity to iOS and Android devices not wanting to cooperate. Currently, Lync is using a certificate
issued by a local CA. The CA root certificate has been imported to the devices that are having trouble connecting, and I've done this via email import without success, as well as using the iPhone Configuration Utility. In all tested instances, an error that
"the certificate can't be verified" is displayed that prohibits a user from establishing a connection. All domain workstations and remote users that import the root CA have no issues connecting.
I can't seem to figure out what's going on here. Has anyone run into this? This is a quasi-test environment in my lab that I'm testing with a few other people, and as much as we've tried, can't seem to figure out the issue. Any ideas?

To confirm that the certificate has been installed successful do you have a corporate website that is available externally that uses a certificate issued by the CA in question? If the answer is yes I would browse to that site on the phone and see if you
get an error. The Lync mobile clients don't give you a heck of a lot of information for troubleshooting. This will rule out a certificate issue.
Next thing would be your reverse proxy. Are you using ISA server? Test the reverse proxy rule by browsing to the Lync mobile auto discover URL - https://lyncwebexternal.domain.com/Autodiscover/AutodiscoverService.svc/root
Assuming ISA also make sure the rule is configure correctly -
http://technet.microsoft.com/en-us/library/hh690011.aspx
http://blogs.technet.com/b/nexthop/archive/2012/11/19/configuring-reverse-proxy-for-lync-server-2010-mobility.aspx
Let me know what the results are of those tests.
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Check out my blog

Issue with Oracle 10g database connectivity

Hi,
Oracle 10g Express edition is been installed in my machine at the location C:\Oracle10g.
When i tried to connect the same from toad it is working fine.
Visual studio-2008 is been installed in machine at loc C:\Program files(x86)\
Problem I am facing is unable to connect Oracle 10g from vb.net application.I am connecting usig Oracle Provider for OLE DB but the program directly coming to exception block
with out connecting to database.
My OS is Windows7 and I am thinking oracle 10g Express will not support completely to this OS.Please suggest me to resolve this issue and comapatable Oracle DB for the same.
Edited by: 1909 on Apr 25, 2011 12:17 AM

Hi,
Try uninstalling and installing VS at the path which does not include brackets. Have a look at my thread.
Re: Database engine setup for 10.2.0.5
Thanks,
Jignesh

Performance issues with Oracle EE 9.2.0.4 and RedHat 2.1

Hello,
I am having some serious performance issues with Oracle Enterprise Edition 9.2.0.4 and RedHat Linux 2.1. The processor goes berserk at 100% for long (some 5 min.) periods of time, and all the ram memory gets used.
Some environment characteristics:
Machine: Intel Pentium IV 2.0GHz with 1GB of RAM.
OS: RedHat Linux 2.1 Enterprise.
Oracle: Oracle Enterprise Edition 9.2.0.4
Application: We have a small web-application with 10 users (for now) and very basic queries (all in stored procedures). Also we use the latest version of ODP.NET with default connection settings (some low pooling, etc).
Does anyone know what could be going on?
Is anybody else having this similar behavior?
We change from SQL-Server so we are not the world expert on the matter. But we want a reliable system nonetheless.
Please help us out, gives some tips, tricks, or guides
Thanks to all,
Frank

Thank you very much and sorry I couldnt write sooner. It seems that the administrator doesnt see the kswap going on so much, so I dont really know what is going on.
We are looking at some queries and some indexing but this is nuts, if I had some poor queries, which we dont really, the server would show pick right?
But he goes crazy and has two oracle processes taking all the resources. There seems to be little swapping going on.
Son now what? They are all ready talking about MS-SQL please help me out here, this is crazy!!!
We have, may be the most powerful combinations here. What is oracle doing?
We even kill the Working Process of the IIS and have no one do anything with the database and still dose two processes going on.
Can some one help me?
Thanks,
Frank

How to connect to SQL server 2000 with Oracle Form

Hi,
I'm looking for the document of how to connect "SQL Server 2000" with Oracle Form 6i. Anyone knows that?

Shay or other knowledgeable folks,
Is there a way to utilize the wizard for "Business Tier > ADF Business Components > Business Components from Tables" for SQL Server 2000, 2005 or 2008. I can successfully execute sql via java programmatically or import a table from SQL Server with "Business Tier > ADF Business Components > Entity Object" wizard, but the Business Components from Tables simply doesn't see any tables under any schema. Without the "Business Components from Tables", i don't get the referential constraints imported into the application and to code all those from scratch is just not as elegant. So far i have only utilized the sql server jdbc driver from Microsoft (versions, 1.1, 1.2 and 2.0). Is there an alternative client that i need to use to enable selecting tables from that "Business Components from Tables" wizard. Is this a limitation of SQL Server, the jdbc driver or the wizard itself? Did anybody else experience the same issues? I am using Jdeveloper 11.1.1.0.1 against SQL Server 2005 (currently)
Thanks,
Andy

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g dat

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g database. So, i have installed both databases on different pc's on windows platform. MS SQL Server 2005 on windows XP and Oracle 10g on windows 2003.
I have configure Golden Gate step by step by following oracle guideline:
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
When i run following command on target (oracle 10g):
replicat paramfile dirprm/inload.prm
I encounterd following error:
2012-05-21 20:27:06 ERROR OGG-00014 Unrecognized parameter: USERID. Paramete
r could be misspelled or unsupported.
2012-05-21 20:27:06 ERROR OGG-01668 PROCESS ABENDING.
My INLOAD FILE Content are:
SPECIALRUN
END RUNTIME
USERID gg_user, PASSWORD welcome1
EXTFILE D:\oracle\gg\dirdat\ex
SOURCEDEFS D:\oracle\gg\dirdef\emp.def
MAP hrschema.emp, TARGET gg_user.emp;
Can you plz suggest me that where i am wrong?
Thanks advance to all experts.

amardeep.sidhu wrote:
That should work, just in case try adding DBLOGIN before USERID
DBLOGIN USERID x..No needed in the param file i think.its not needed at all you are right, but what else could it be? Besides any special unseen character :P

I'm having issues with oracle ODBC and access 2007

Hello all,
     I'm having an issue with using an ODBC connection with a pass-through query in access 2007. I have Oracle 9i installed and am on Windows 7 32 bit. This only seems to be effecting Windows 7 users and not XP users.
The error in the SQL Log is this.
CLDemoFE        1694-162c EXIT SQLDriverConnectW with return code -1 (SQL_ERROR)
HDBC                0x00787430
HWND                0x000501FC
WCHAR *             0x6D3A8B34 [      -3] "******\ 0"
SWORD                       -3
WCHAR *             0x6D3A8B34
SWORD                       -3
SWORD *             0x00000000
UWORD                        0 <SQL_DRIVER_NOPROMPT>
DIAG [NA000] [Microsoft][ODBC driver for Oracle][Oracle]ORA-01019: unable to allocate memory in the user side (1019)
DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
I've been looking all over the internet and can't find an answer to the issue and decided to post it to see what other people thought.
Thank you in advance.

I've had exactly the same problem for weeks now.   When using Safari, it stalls, freezes, then starts working again. I checked the console and exactly when it freezes. I get the following:
2015-02-25 5:51:59.000 PM kernel[0]: process com.apple.WebKit[405] caught causing excessive wakeups. Observed wakeups rate (per sec): 216; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 849849
and:
2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.FC16A539-929A-43E5-91EB-34A5669B70FD[1265]) Could not terminate job: 3: No such process
2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.FC16A539-929A-43E5-91EB-34A5669B70FD[1265]) Using fallback option to terminate job...
2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.1004D4B5-112D-4D90-9779-B2BEFB570C7F[1262]) Could not terminate job: 3: No such process
2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.1004D4B5-112D-4D90-9779-B2BEFB570C7F[1262]) Using fallback option to terminate job...
2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.9F72A6A1-63F5-41B2-B02F-40D4CB0925A2[1261]) Could not terminate job: 3: No such process
2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.9F72A6A1-63F5-41B2-B02F-40D4CB0925A2[1261]) Using fallback option to terminate job...
2015-02-25 9:21:46.864 PM com.apple.launchd[1]: (com.apple.WebKit.Networking.8CDDD2D1-B6B6-4F09-B8DE-5C4A4E9F653E[1260]) Exited with code: 1
2015-02-25 9:21:46.998 PM com.apple.launchd[1]: (com.apple.WebKit.Plugin.64.39152B03-68E5-463E-A6C0-A9734AF733A2[1268]) Exited with code: 1

Facing Issue With Oracle SOA Suite 11.1.1.3.0

Hi All,
I am facing some issues with ORACLE SOA SUITE 11.1.1.3.0.
Hope you people can help us out.
Please find the issue details below along with all the relevant information’s
I have following SOA suite installation at my server:
Oracle 10g Express Edition Universal 10.2.0.1
RCU 11.1.1.3.3
Web Logic Server 10.3.3.0
SOA suite 11.1.1.3.0
JDeveloper 11.1.1.3.0
The first thing what I have done is created a web service and deployed it to server without any issue.
After that I created proxy client for that service and accessed it successfully from the client end.
Till here no issue occurs.
After that I applied few policies on top of web service and deployed it to server.
The policy I had chosen was “oracle/wss_username_token_service_policy” [coming under OWSM policies list]
While deploying there was no issue, all went well.
2nd step I had created client using “oracle/wss_username_token_client_policy” policy which is counter part of above policy and tried to access the web service but failed.
I have followed this blog:
[http://biemond.blogspot.com/2010/08/things-you-need-to-do-for-owsm-11g.html ]
Please have a look on service and client code:
Service Code:
package Demo_ScoreCard;
import javax.jws.WebService;
import weblogic.wsee.jws.jaxws.owsm.SecurityPolicy;
@WebService
@SecurityPolicy(uri = "oracle/wss_username_token_service_policy")
public class ScoreCardWithPolicy {
public double getPercentageWithPolicy(double markEng,double markMath,double markHindi,double markScience,double markSsc)
double result;
result= ((markEng+markHindi+markMath+markScience+markSsc)/500)*100;
return result;
Client Code:
package com.tec.proxy.client;
import java.util.Map;
import javax.xml.ws.BindingProvider;
import javax.xml.ws.WebServiceRef;
import weblogic.wsee.jws.jaxws.owsm.SecurityPolicyFeature;
public class ScoreCardWithPolicyPortClient {
@WebServiceRef
private static ScoreCardWithPolicyService scoreCardWithPolicyService;
public static void main(String[] args) {
scoreCardWithPolicyService = new ScoreCardWithPolicyService();
SecurityPolicyFeature[] securityFeatures =new SecurityPolicyFeature[] { new SecurityPolicyFeature("oracle/wss_http_token_client_policy") };
ScoreCardWithPolicy scoreCardWithPolicy =scoreCardWithPolicyService.getScoreCardWithPolicyPort(securityFeatures);
Map<String, Object> reqContext =((BindingProvider)scoreCardWithPolicy).getRequestContext();
reqContext.put(BindingProvider.USERNAME_PROPERTY, "testclient");
reqContext.put(BindingProvider.PASSWORD_PROPERTY, "test12345"); // I have added this to the myrealm from console under security realms
double arg1 = 77.2;
double arg2 = 79.2;
double arg3 = 77.2;
double arg4 = 76.2;
double arg5 = 67.2;
double clientResult =scoreCardWithPolicy.getPercentageWithPolicy(arg1, arg2, arg3, arg4,arg5);
System.out.println("clientResult with policy =====> " + clientResult);
Error Log:
SEVERE: WSM-07617 Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
SEVERE: WSMAgentHook: An Exception is thrown: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
Exception in thread "main" javax.xml.rpc.JAXRPCException: oracle.wsm.common.sdk.WSMException: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
at oracle.wsm.agent.handler.wls.WSMAgentHook.handleException(WSMAgentHook.java:395)
at oracle.wsm.agent.handler.wls.WSMAgentHook.init(WSMAgentHook.java:206)
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.newHandler(TubeFactory.java:105)
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.createClient(TubeFactory.java:68)
at weblogic.wsee.jaxws.WLSTubelineAssemblerFactory$TubelineAssemblerImpl.createClient(WLSTubelineAssemblerFactory.java:148)
at com.sun.xml.ws.client.WSServiceDelegate.createPipeline(WSServiceDelegate.java:467)
at com.sun.xml.ws.client.WSServiceDelegate.getStubHandler(WSServiceDelegate.java:689)
at com.sun.xml.ws.client.WSServiceDelegate.createEndpointIFBaseProxy(WSServiceDelegate.java:667)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:362)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.internalGetPort(WLSProvider.java:855)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate$PortClientInstanceFactory.createClientInstance(WLSProvider.java:967)
at weblogic.wsee.jaxws.spi.ClientInstancePool.takeSimpleClientInstance(ClientInstancePool.java:621)
at weblogic.wsee.jaxws.spi.ClientInstancePool.take(ClientInstancePool.java:486)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.getPort(WLSProvider.java:782)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:344)
at javax.xml.ws.Service.getPort(Service.java:133)
at com.tec.proxy.client.ScoreCardWithPolicyService.getScoreCardWithPolicyPort(ScoreCardWithPolicyService.java:86)
at com.tec.proxy.client.ScoreCardWithPolicyPortClient.main(ScoreCardWithPolicyPortClient.java:23)
Process exited with exit code 1.
Not getting any help from any blog. Just wondering why this error is coming. I would be glad if you can help us in this regard.
Apart from above issue I have few queries like:
1.What is difference between OWSM policies and WLS policies?
2.Are these the only policies we can apply on top of services?
3.If some one wants to configure his own custom policies than what need to be done
4.Could anyone please provide some useful links to implement ENCYPTION and SIGNATURE on top of web services?
5.And If I am not wrong, I guess Oracle Service BUS OSB 11.1.1.3 has been removed from the main download link and version 11.1.1.4 has been provided. Is it
compatible with SOA suite 11.1.1.3.0? If not where can I get OSB 11.1.1.3?
Looking forward to hear from you people.
Thanks
Arvind
Edited by: user8490871 on Apr 15, 2011 12:53 AM
Edited by: user8490871 on Apr 15, 2011 12:53 AM

Hi,
I don't know why u get an error. Here are answers for additional questions:
1. OWSM policies are for web services. WLS policies are based on Java EE security. They are used to protect resources e.g. URL, EJB
2. I don't know about other policies
3. See http://download.oracle.com/docs/cd/E14571_01/web.1111/e13713/owsm_appendix.htm#CHDCHFBH
4. See http://download.oracle.com/docs/cd/E14571_01/security.1111/e10037/toc.htm
5. I can see OSB 11.1.1.3 download link here
http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Regards,
Milan

Known compatibility issues with 2008 and 2008 R2

For some reason i am not able to make remote connections from VS 2013 to my current installation of SQL server 2008 so i thought to uninstall it and install another edition i got from MSDN but i the uninstall process keeps failing saying theres a known
compatibility issues with 2008 and 2008 R2. it also gave me the option to seek solution online but when i click on it it is unable to get a solution online and i am never able to uninstall it. please help me here. i need to get SQL server up and running. thanks

Hi FLORENCEOKOSUN,
According to your description, you encounter a compatibility issue when uninstalling SQL Server 2008. For further analysis, please help to post the full error message and
SQL Server summary log. By default, the log can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
There is also a KB article about known issues of installing SQL Server 2008 on Windows Server 2008 R2 for your reference.
https://support.microsoft.com/en-us/kb/955725
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Issues with Oracle in a new location.

Hello -
I recently had to change the computer name of a Windows 2003 SP2 test server. Among other software installed was Oracle 10g r2. There were issues with Oracle in its new location where it was trying to reference the old computer name.
I assumed that all I would have to do to correct the issue was to search all of Oracle’s .ORA files and replace the old server name with the new one. (Plus, of course, changing the Windows Host file entry).
But I’m finding that Oracle on Windows apparently has many other references to the original computer name. For example, there are subdirectories in the Oracle Home directory tree structure where the directories themselves contain the old computer name. (I’ve attached a screenshot of a file search off the Oracle directory tree for “BRI2KSRV” which is the test server’s old name. “Bri2ksrv.jax.fnfis.com” was the server’s old fully qualified name. ORCL is/was the default instance name).
For example, these directories were found:
..\oracle\product\10.2.0\db_1\bri2ksrv.jax.fnfis.com_orcl
..\oracle\product\10.2.0\db_1\log\bri2ksrv
..\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_bri2ksrv.jax.fnfis.com_orcl
What are the recommended steps when changing the Windows computer name (and thus the fully qualified network references) on a Windows 2003 Server which has a functioning Oracle 10g R2 instance?
Thanks!

These directory you mentioned are EM control directory. You need to reconfigure your EM with new server name.
If you are using server name instead of IP address in listener.ora and tnsnames.ora you need to change these as well.

Are there any compatibility issues with Sonos and Airport extreme??

are there any compatibility issues with Sonos and Airport extreme??

Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

Server Issue with Oracle and ASP Connection

Similar Messages

Maybe you are looking for