Server OutOfMemoryError on return

I am using the JBoss application server and I am receiving an OutOfMemoryError that is picked up by the client when I return an object from the server. The error looks like this:
java.rmi.ServerError: Error occurred in server thread; nested exception is:
java.lang.OutOfMemoryError
java.lang.OutOfMemoryError
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:245)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:220)
This happens right after the code that returns to the client from the server. Right before I send the object back, I check the free memory and I have over 8Gigs left (-Xms8G -Xmx10G) The object being sent is about 300 megs. I also have a try catch block for OutOfMemoryError's on the server side code, wrapped around the return, and I get no errors on the JBoss console. I am using JBoss3.0.0.
I am thinking that something is going on from the time the ojbect leaves the server to the time it reaches the client.
Any ideas??

Ok.
The out of memory problem can occur if you run out of "permanent heap space" which is only part of the regular heap space.
Or at least in previous versions it could.
So you might try adjusting that.
See http://java.sun.com/docs/hotspot/VMOptions.html and search for "permanent"

Similar Messages

Microsoft Exchange Server 2013 Cumulative Update 7 Setup - Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error - Set-SharedConfigDC

What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
 at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
 at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
 at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
 at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
 at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
 " was run: "System.Exception: Unable to set shared config DC.
 at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
 at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
 at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
 at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
 at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:

Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support

Server does not return metadata, check the query.

Hi,
I need your help in using report designer of Bex, The issue is when we try to open a query in the report designer we get a Error Server does not return metadata, check the query.
Thanks in Advance
Kind Regards
Phutane

Hi,
All the yellow and red lights will have an effect on query performance or execution. Read up on them as there are too many to explain via this forum.
There is a document on SDN on query performance. Some useful links:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a]
[http://help.sap.com/saphelp_nw70/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/frameset.htm]
[http://help.sap.com/saphelp_nw70/helpdata/en/d9/31363dc992752de10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/2e/caceae8dd08e48a63c2da60c8ffa5e/frameset.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0501cb9-d51c-2a10-239c-c141a22c45a6]
Cheers...

Server does not return query metadata check the query

hi,
i want know how to use bex query designer,
when i insert a data provider,the message is appear "server does not return query metadata check the query",
who can help me ?
thanks a lot !
addition: my current entironment is: gui710 with sp4,bi710 with sp2.

Hi,
All the yellow and red lights will have an effect on query performance or execution. Read up on them as there are too many to explain via this forum.
There is a document on SDN on query performance. Some useful links:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a]
[http://help.sap.com/saphelp_nw70/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/frameset.htm]
[http://help.sap.com/saphelp_nw70/helpdata/en/d9/31363dc992752de10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/2e/caceae8dd08e48a63c2da60c8ffa5e/frameset.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0501cb9-d51c-2a10-239c-c141a22c45a6]
Cheers...

DTR: Ping on server ... returned: 401 Unauthorized

Hi there,
has anyone experienced (and solved) the following:
when trying to connect to the DTR from NWDS, I get the following mesage in my Command Output:
DTR: Ping on server ... returned: 401 Unauthorized
Logging on via browser (http://<srv>:<port>/dtr or /devinf) works fine.
The DTR server only consists of the J2EE stack and all user roles / groups seem to be set up correctly.
Thanks in advance for your help !
Best regards
Jochen

Hi Jochen,
You are correct with your assumptions. When you login to the DTR, you are sure that you are using a username/pass that has the appropriate role? That's the only explanation I can think of. The other responses to your question probably won't help much, because if those were the root of your problem you would probably be getting a 404 instead of a 401. 401 really indicates that there is some security/user auth problem. Please double check this and let me know what your progress is.
Cheers,
Steve
If you find a post useful, please help keep the community going by setting a good example and rewarding the poster with points.

MII 14.0 SP5 - 500 Internal Server Error is returned for HTTP request - XMIIVirtual Illuminator

Hello All,
I appreciate your help with the issue.
We are connecting from MII 12.1 to MII 14.0 SP5 Patch 3 on our local MII server using virtual connectors. We appreciate your help on it.
This issue is happening for MII 14.0 SP5 Patch 3 on our local MII server
As per the logs, accessing http://server:port/XMIIVirtual/Illuminator gives 500 Internal Server Error
500 Internal Server Error is returned for HTTP request [http://server:port/XMIIVirtual/Illuminator]:
component [VirtualProxyConnector],
web module [XMIIVirtual],
application [sap.com/xapps~xmii~ear],
DC name [sap.com/xapps~xmii~ear],
CSN component[],
problem categorization [com.sap.ASJ.web.000137],
internal categorization [-944271956].
[EXCEPTION]
java.io.IOException: Stream closed.
at java.net.PlainSocketImpl.available(PlainSocketImpl.java:483)
at java.net.SocketInputStream.available(SocketInputStream.java:217)
at java.io.BufferedInputStream.read(BufferedInputStream.java:325)
at com.sap.engine.httpdsrclient.io.ServerInputStreamWrapper.read(ServerInputStreamWrapper.java:49)
at java.io.DataInputStream.read(DataInputStream.java:83)
at com.sap.servlet.VirtualProxyConnector.service(VirtualProxyConnector.java:110)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:202)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:103)
at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:126)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:441)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:278)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Thanks,
Kiran
Message was edited by: Kiran Sakhardande

Hello Julian
This is a known problem.
Cause
- A user may have been added to a group in another ldap tree with a name, that is already existing.
- When DTR retrieves the group from UME, we get 2 similar group names, but the groups may be different.
- DTR cannot handle this and throws "Internal Server error"
Resolution
If you change parameter "ume.ldap.unigue_grup_attribute" to 'uid', DTR doesn't use the groupname,
but the group-uid, therefore the group is unique.
1. open Visual Administrator
2. choose Services
3. choose UME Provider
4. Reset "ume.ldap.unigue_grup_attribute" with 'uid'
5. restart the system
Thanks
Kenny.

ERROR: FMS Server did not return correctly!

We have several adobe connect HOST meeting rooms. Lately, some users have sent us their complaints arguing:
"Unable to connect - FMS server did not return corrently"
I asked them to send me the test's details.
"App-Server returned: code:ok, servers=rtmp://fmwebserversec:1935/_rtmp://localhost:8506/,rtmpt://fmwebserversec:443/_rt mp://localhost:8506/"
I know, this threat has been post at this forum, but I don't find a solution for my users. The Adobe Connect Support is trying to give a solution, but at the moment, I haven't recieve any solution.
I' ve tried: disconnect firewall, anti-virus,... and they keep unable to connect. (using adobe connect hosted ver 7.5)
Thanks for your advice and help.
Rafael

Obviously this topic creates controversy

Error "java.lang.OutOfMemoryError" When Returning Large Number of Docs

In our SES implementation, we have a custom search interface that allows users to search for documents and then add them to a "shopping cart". Users add then to their shopping cart from search results, by adding docs one-by-one or an Add All option. Once they are done "shopping" they create a report.
Here is the scenario...
Users are saerching for documents and seeing that on page 1, there is 1 - 10 of about 300 results. They clicked Add All and want all 300 docs added to their cart.
What we do under the covers is we execute another search and set the docs requested to 200. We get the array of docs, iterate over them and add the keys to a list. We found 200 docs at a time to be a safe number. However, there are still 100 docs that were not added to their cart and users want all 300 added. In other words, when they click Add All, they want to add all docs, 300, 500, 5000, etc.
I set the "Maximum Number of Results" to 500 and found that I can safely add up to ~ 350 docs at one time. However, going past this point throws the following error:
[SOAPException: faultCode=SOAP-ENV:Server; msg= [java.lang.OutOfMemoryError]]
     at oracle.search.query.webservice.client.OracleSearchService.makeSOAPCallRPC(OracleSearchService.java:941)
     at oracle.search.query.webservice.client.OracleSearchService.doOracleSearch(OracleSearchService.java:469)
After this error is thrown, SES was unable to recover and searching would not work anymore, even return 10 docs at a time. We had to restart SES to resolve the issue.
1. What is throwing this error? Is it the amount of XML being returned?
2. What is the maximum number of results we can get back at any one time? Is it based on the amount of data being returned or the number of attributes?
We are running 10.1.8 with plans to upgrade soon.
Thanks in advance.

I know it may be hard to throw away all this code, but consider using the jakarta fileupload component.
I think it would simplify your code down to
// Create a factory for disk-based file items
FileItemFactory factory = new DiskFileItemFactory();
// Create a new file upload handler
ServletFileUpload upload = new ServletFileUpload(factory);
// Parse the request
List /* FileItem */ items = upload.parseRequest(request);
// Process the uploaded items
Iterator iter = items.iterator();
while (iter.hasNext()) {
    FileItem item = (FileItem) iter.next();
    if (item.isFormField()) {
        processFormField(item);
    } else {
        // item is a file. write it
        File saveFolder = application.getRealPath("/file");
        File uploadedFile = new File(saveFolder, item.getName());
        item.write(uploadedFile);
}Most of this code was hijacked from http://jakarta.apache.org/commons/fileupload/using.html
Check it out. It will solve your memory problem by writing the file to disk temporarily if necessary.
Cheers,
evnafets

SQL 2000 linked server to MSDAORA returns "provider did not ...

Hi, I have a linked server setup in SQL 2000 using "MS OLE DB Provider for Oracle" to connect to a Oracle 9.2 DB on another server.
This works fine apart from when the Oracle database is being backed-up, in which case any query against it returns: -
Step Error Source: Microsoft OLE DB Provider for SQL Server
Step Error DescriptionLE DB provider 'MSDAORA' reported an error. The provider did not give any information about the error. (Microsoft OLE DB Provider for SQL Server (80040e14): OLE DB error trace [OLE/DB Provider 'MSDAORA' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the error.].)
This is OK when the backup is running but we could be missing important messages if the Oracle errors are not able to be passed back correctly.
Any help would be much appreciated.
Regards,
Richard

did you find any answers? I have encountered the same problem

JNDI lookup() for sql server jdbc datasource returns null

Hi,
I am trying to use a jdbc datasource in tomcat 5 to access a sql server 2000 database. I had many common problems and did found an answer to them in the forums but I'm having one last (I hope) problem. My program is also using a mySQL datasource and it works fine.
The problem is that my lookup returns null. No exception, just null. It seems that many people had this problem but I didn't found any answer to it.
This is the lookup code:
 Context ctx = new InitialContext();
 Context envCtx = (Context)ctx.lookup("java:comp/env");
 axaptaDS = (DataSource) envCtx.lookup("jdbc/axapta"); //returns null :(This my context.xml config:
<ResourceParams name="jdbc/axapta">
 <parameter>
 <name>factory</name>
 <value>com.microsoft.jdbcx.sqlserver.SQLServerDataSourceFactory</value>
 </parameter>
 <parameter>
 <name>url</name>
 <value>jdbc:microsoft:sqlserver://hostname:1433</value>
 </parameter>
 <parameter>
 <name>password</name>
 <value>password</value>
 </parameter>
 <parameter>
 <name>maxActive</name>
 <value>4</value>
 </parameter>
 <parameter>
 <name>maxWait</name>
 <value>5000</value>
 </parameter>
 <parameter>
 <name>driverClassName</name>
 <value>com.microsoft.jdbcx.sqlserver.SQLServerDataSource</value>
 </parameter>
 <parameter>
 <name>username</name>
 <value>username</value>
 </parameter>
 <parameter>
 <name>maxIdle</name>
 <value>2</value>
 </parameter>
</ResourceParams>And I also put these lines in my web.xml file:
<resource-ref id="ResourceRef_1092254277306">
 <res-ref-name>jdbc/axapta</res-ref-name>
 <res-type>javax.sql.DataSource</res-type>
 <res-auth>Container</res-auth>
 <res-sharing-scope>Shareable</res-sharing-scope>
</resource-ref>Thanks for helping!

I finally found a remedy to this problem:
specify this driver instead and remove the entry about the factory in the context's .xml file:
com.microsoft.jdbc.sqlserver.SQLServerDriver

Using Web Services on the Crystal Report Server XI to return reports

Hi,I'm trying to setup for the first time a Crystal Reports Server XI R2 and put a couple of reports onto the server. This is so I can access the reports on the crystal reports server using using the crystal web services and finally display the reports in an ASP.NET web application.So far I have installed the server, created a couple of reports, put them on the server, and tested to see that I can access the reports using the Central Management Console. This all works fine and the reports are returned. Ok, now for the bit that's not working. I've got a C# ASP.NET web application, and I've followed a couple of <a href="http://support.businessobjects.com/documentation/product_guides/cr_net/vs_2005/html/crtsktutorialsotherdynamicpulldownwebservicehelpermethod.htm" target="_blank" title="Adding a Helper Method to Access Crystal Reports Web Services">tutorials</a> to give me an idea of what I should be doing to use the Web Services that are provided: <ul><li>ServerFileReportManager.asmx</li><li>ServerFileReportService.asmx </li></ul>However, it appears that when I list the child objects on the crystal server:<blockquote>serverFileReport = new ServerFileReport(); serverFileReport.ReportPath = ""; reportManagerRequest = new ReportManagerRequest(); reportManagerRequest.ExtraData = serverFileReport.GetExtraData(); reportManagerRequest.ParentUri = serverFileReport.ToUri(); ReportManagerResponse reportManagerResponse = new ReportManagerResponse(); reportManagerResponse = serverFileReportManagerProxy.ListChildObjects(reportManagerRequest);</blockquote>I always get a reportManagerResponse.ReportUris with a count of 0. Now the thing is I know that I have a couple of reports on the Crystal Server, but for some reason they're not been picked up. I must be missing something.Does anyone have any ideas??? Please!Many thanks in advance, ChrisCurrent Set-up:<ul><li>Crystal Reports Server XI R2 (11.5)</li><li>Virtual Directory of the web services: crystalreportviewers115 </li><ul><li>(Physical Path - C:\Program Files\Business Objects\common\3.5\crystalreportviewers115)</li></ul><li>Development Environment: Visual Studio 2005</li></ul>

I looks like your mixing technologies here. You are using Crystal Report Server and the Crystal Report Web Services that come with Visual Studio.I know that this might seem like they are the same product, and the naming does seem confusing but I'll try and make it easy for you to understand.Crystal Reports Server - This is a managed reporting solution which allows you to distribute your reports via the web. It has features like scheduling and built in security.It appears that you have a handle on what Crytal Report Server is from what you have been able to accomplish those far. You have created your report and published it to Crystal Report Server and viewed it via the Central Management Console. Crystal Reports Server has two methods for accessing the reports programatically.1. The Enterprise SDK2. The Web Services SDK<a href="/node/353">Check out this white paper that compares these two SDKs </a><a href="/node/256">This paper describes the Web Services SDK.</a>In the above paper there is a getting started section which points you to the Developer Library which shows you how to install the web services on your Crytal Reports Server machine.Crystal Reports Server does not have the Business Object web services installed by default so I would suggest following the directions in the <a href="http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/devsuite.htm">Developer Library.</a>The directions wont talk about Crystal Reports Server but these are the directions to get the Web Services installed. There is another web services technology which you are writing code for which is called Crystal Report Web Services. This technology comes with Visual Studio 2003. It provides un-managed reports via webservices. Un-managed means these reports are not published to Crystal Reports Server.So basically your problem is that your code is for Crystal Report Web Services but you are trying to view reports published to Crystal Reports Server. To take advantage of scheduling and security and web service access I would suggest using Crystal Reports Server and install the Business Objects Platform webservices to access the reports. I hope that's clear. Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

InDesign Server (via SOAP) -- Returning Binary Data: Possible or Not?

is it possible to return binary data to soap client?
given: myFile = File('MyFancyJpeg.jpg');
I want to return either a base64 encoded, or hex result back to the SOAP client. (filetype, above, is totally arbitrary, by the way)
Is InDesign server capable of something like this?

I think so. See ww-ids-soap.pdf in the SDK. You can return to the client any value you want; the value is typed in the SOAP response. An example from that pdf of a mixed-type array response:
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope
 xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xmlns:xsd="http://www.w3.org/2001/XMLSchema"
 xmlns:IDSP="http://ns.adobe.com/InDesign/soap/">
 <SOAP-ENV:Body>
 <IDSP:RunScriptResponse>
 <errorNumber>0</errorNumber>
 <scriptResult>
 <data xsi:type="IDSP:List">
 <item><data xsi:type="xsd:string">1</data></item>
 <item><data xsi:type="xsd:string">2</data></item>
 <item><data xsi:type="xsd:long">10</data></item>
 <item><data xsi:type="xsd:long">12</data></item>
 </data>
 </scriptResult>
 </IDSP:RunScriptResponse>
 </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Jeff

Server.MapPath(virtualPath) Returns root directory of controller, it is nor returns the physical path mentioned in the virtual directory in IIS

I have created a virtual directory "myVirtualFile" virtual path is "\myVirtualFile" and I have given physical path as "D:\Home\myProject\Files"
Below is my code
var virtualpath="/myVirtualFile\UserManual";
var resultPath=Server.MapPath(virtualpath);
out put is resultPath contains "D:\Home\myProject\Web\client\myVirtualFile\UserManual" Expected out put is "D:\Home\myProject\Files".
It returns the folder structure of my project. I didn't return the physical path which I mentioned in virtual directory.

Hi,
I am not expert on Asp.Net. But I will try my best.
The following sample is what are
Virtual paths and Physical paths
ASP.NET the "~" tilde indicates the root of a virtual path.
Virtual paths
~/App_Data/Sample.xml
~/
~/Map.txt
Physical paths
C:\Website\Files\Sample.xml
C:\Website\Default.aspx
C:\Website\Map.txt
Server.MapPath doesn't find automatically where a file is. It allows to get the physical path
corresponding to a virtual path (relative to the current request if you don't give an absolute path)
If above still cannot resolve your issue, please repost in Asp.Net forum, The link as above posted.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[Exchange-Online][EWS][EWS-XML] Exchange server version "V2_22" returned for Office 365 breaks pattern - consequences?

I just notice that talking to Office365 Exchange Web Services at https://outlook.office365.com/ews/exchange.asmx I get this in my SOAP response header:
<Envelope>
<Header>
 <ServerVersionInfo MajorVersion="15" MinorVersion="0" MajorBuildNumber="1049" MinorBuildNumber="23" Version="V2_22"/>
</Header>
This means that the Version 'schema version' property (http://msdn.microsoft.com/en-us/library/exchangewebservices.serverversioninfo.version%28v=exchg.150%29.aspx) now breaks the pattern of versions that we had earlier: Exchange2007, Exchange2007_SP1, Exchange2010,
Exchange2010_SP1, Exchange2010_SP2, Exchange2013
In the schema files I found through Google (searching for <xs:simpleType name="ExchangeVersionType">) I could not find anything later than <xs:enumeration value="Exchange2013"/> (e.g. at http://msdn.microsoft.com/en-us/library/ee237685%28v=exchg.80%29.aspx)
If I do a SOAP request with this "V2_22" string, I still get valid answers.
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:typ="http://schemas.microsoft.com/exchange/services/2006/types"
xmlns:mes="http://schemas.microsoft.com/exchange/services/2006/messages">
 <soapenv:Header>
 <typ:RequestServerVersion Version="V2_22"/>
 </soapenv:Header>
But it now looks as if the returned Version is no longer a reliable way to determine the Exchange server version. If V2_22 is not documented anywhere, who says it will not suddenly change to V2_23 tomorrow?
Question: Does this mean I will now have to change my version detection code to look at MajorVersion and then maintain a cross reference between MajorVersion and ExchangeVersionType **myself**? That is horrible: another dependency to maintain
is another potential code break.
As an aside: Note that the "Exchange Server Updates: build numbers and release dates" at http://technet.microsoft.com/en-us/library/hh135098%28v=exchg.150%29.aspx is no longer up to date, it does not mention the 15.0.1049.23 that my XML just returned

What really matters in EWS is the SchemaVersion as that will tell you what operations you can and can't use. From 2010 on you can use AutoDiscover to find what SchemaVersions are supported which is the best way to do version detection. eg
AutodiscoverService adAutoDiscoverService = new AutodiscoverService(ExchangeVersion.Exchange2010);
adAutoDiscoverService.Credentials = ncCred;
adAutoDiscoverService.EnableScpLookup = false;
adAutoDiscoverService.RedirectionUrlValidationCallback = adAutoDiscoCallBack;
adAutoDiscoverService.PreAuthenticate = true;
GetUserSettingsResponse adResponse = adAutoDiscoverService.GetUserSettings("[email protected]", (new UserSettingName[1] { UserSettingName.EwsSupportedSchemas }));
if (adResponse.Settings.Count >= 1)
String schemas = (String)adResponse.Settings[UserSettingName.EwsSupportedSchemas];
I would be careful using the Major build going forward if you have a look at the requests in OWA in Office365 you'll see they are using version 16 in cookies etc
Cheers
Glen

SDM Server Stopping with return Code 8 in WAS 6.4

Hi
I have got full version of JAVA for WAS 6.4. Im able to install the whole thing successfully. After successful installation SDM Server is stopping with (I mean the instance of Server 0 is in Yellow) return Code 8.
Can any one tell me how to fix the problem
thanks
raj

Run sdm in "mode=integrated". The problem is: you run SDM in standalone mode.
For more information about howto change mode look up in your directory:
sdm_directory\program\doc\SDMCommandLineDoc630_en_final.pdf

Server OutOfMemoryError on return

Similar Messages

Maybe you are looking for