Server path not recognized on ical

I have updated my Mac, iphone4 and ipad. I am using icloud. When i try to synch my ical with icloud, I get a message that my server path is not recognized. What's up? It was working yesterday with no problem and I haven't changed any settings.

FYI: POP will by default, delete messages from the server after downloading them (This applies to most pop clients, computer or mobile). POP is old tech and is not recommended if IMAP or Exchange are available. The default when setting up a g-mail type account is IMAP. Full synchronization with the server. You may also be able to set it up as an Exchange account, allowing for push e-mail and sync of calendars and contacts as well. See the Gmail help pages for instructions.

Similar Messages

Server path not drive CL_GUI_FRONTEND_SERVICES= FILE_OPEN_DIALOG

Hi folks
When using the CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG or WS_FILENAME_GET we some times have the server path returned.
And sometimes the drive letter returned.
See two examples:
1: \\blrx1\os390out\id1\test.txt
2: R:\os390out\id1\test.txt
What to do when we ALWAYS want the server path returned??
Best regards
Carsten

I have used this several times in my own coding and I always get the \\
in my end result
method import_the_file_locn.
data:
    lv_wintitle type string value 'Select Upload File',
    lv_deffile type string value 'asset_data',
    lv_dir type string value 'c\:',
    ls_file type line of filetable,
    lv_rc type i,
    lv_user_action type i.
free gv_sdir.
call method cl_gui_frontend_services=>file_open_dialog
    exporting
      window_title            = lv_wintitle
      default_filename        = lv_deffile
      initial_directory       = lv_dir
    changing
      file_table              = gt_file
      rc                      = lv_rc
      user_action             = lv_user_action
    exceptions
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      others                  = 4.
check lv_user_action is initial.
read table gt_file into ls_file index 1.
translate ls_file to lower case.
gv_sdir = ls_file.
endmethod.
I don't know whether it is perhaps a mapping issue / windows setting that results in the path returned with the mapped drive?
I just debugged one of methods above and I cant recreate the same issue when I pick up a file in a mapped directory, sorry.
I guess there is also the option for you to do some substring manipulation and path mapping in a look up table - but if you have hundreds of servers rather than a few maybe not the best workaround.

SMPT server does not recognized when send email use POP3

I can not send email from outlook on Mac Pro - I use the same server for incoming and out going, incoming email well receive but not outgoing and one can help ?
it notice show as bellow
Error - Through this server
Can not send email. The SMTP server does not recognize any of the authentication methods supported by outlook. Try change your SMTP.... I use the same server for incoming and out going, incoming email well receive but not outgoing and one can help ?

The problem is probably the wrong host name. If you have an MSN account the outgoing server may be different than it is for Hotmail. If you log in to your web mail account and go to the Support page you should be able to find instructions to set up POP3 mail. In those instructions should be the host name, port, and any other settings you need.
Usually you just enter the first part of your email address as the user name, but you should be able to confirm this in the POP3 setup instructions. If the user name alone doesn't work then try the full email address. Also, if you have a login name to MSN that is different from your email address you can try that also.
Regarding the "<hostname>:25" entry, many people have found that email sends faster if you specify the port number; if you don't, the iPhone tries all possible ports which can take several minutes. This isn't your problem, but it is good practice to specify the port number. In versions before 1.1.1 the only way to do this was to put the port number after the host name, separated by a colon. In 1.1.1 there is a separate field for in in the Advanced settings.
It would be helpful to know the error message you are getting when you try to send. That will determine whether the iPhone is not finding the server, or is finding it but the send is being rejected by the server.
Keep at it; there is a way to get it to work.

Now unable to connect to server - URL not recognized

HI All
My mac (power mac g5 on OS X 10.5.7) crashed last night and we had to repair hard drive and file permissions then all working fine again - thank goodness.
One draw back is that I cannot now connect to the server - we use smb://ip address
We do have internet and we can see the mac files from the pc's
The error message we get seems to be a common one "The text entered does not appear to be a recognized URL Format" then lists the acceptable ones (the smb being one of them)
I can connect to an ftp site that we also have stored in our list of connections.
I followed the help information - support.apple.com/kb/TS1736 - deleted the folder and restarted
No joy though - any help would be appreciated.
Many thanks
Lesley
Message was edited by: almondpublishing

I would suggest looking at what might be different between those clients and the others that work. Do they run the same antivirus version? Did they receive any recent updates (windows or AV)? Are they potentially on a different network
(sometimes a wireless network is configured to be different from the wired)? Are they getting any different group policies?
We've seen the antivirus web control block access before in my environment.

On my iphone4 i need to be able to use both TDS and Yahoo e-mail. TDS works only sporadically. For instance, today I was able to both send and receive, then an hour later could not send. got the message that the server was not recognized.

On my iphone4 I need to be able to receive and send both TDS and Yahoo e-mail accounts (I also need to access from my Macbook Pro and my HP desktop). I have NO problem with Yahoo, but with TDS, the e-mail seemed to work on my phone.... and then it didn't.) In adding the TDS account, I chose "other" ( TDS is somehow accessed on the back end through gmail). For the incoming server I used the Incoming Sever Name of pop.gmail.com and the Outgoing Mail Server as smtp.gmail.com. I have using SSL "on" and the server port is 995. Is this setup correct for TDS?

FYI: POP will by default, delete messages from the server after downloading them (This applies to most pop clients, computer or mobile). POP is old tech and is not recommended if IMAP or Exchange are available. The default when setting up a g-mail type account is IMAP. Full synchronization with the server. You may also be able to set it up as an Exchange account, allowing for push e-mail and sync of calendars and contacts as well. See the Gmail help pages for instructions.

Clipping paths not recognized (in InDesign)

Some of my coworkers brought me some files that don't allow the clipping path to be selected in InDesign. These images are saved as PSD format, have a good path drawn and saved. When placed in InDesign, the option to use the clipping path or not is not even available, and the image is not clipped by default. If I place a file showing the import options, I can turn on the path, and it places on the page properly. But invoking the Clipping options in InDesign still shows Photoshop Path as unselectable, but it is checked as it is turned on.
Saving the path as simply a regular path, or as defined as a clipping path, in an EPS file gives me the correct options to use the path in InDesign. Simply resaving the PSD file to another file on my desktop does not fix it.
Is there any way to see what is going on in the file? Though it manifests itself as an InDesigns option problem, the error is inside of the Photoshop file. There is no way to resave the same image document and have it work properly.
The only way for me to "fix" the file is to make a new doc the same size, copy the image, paste into new document, copy path, paste into new doc, and save as a new name. Then the "started from scratch" file works properly.
Anyone have any suggestions?

@WasDYP: It's only a couple of files so it's not something I'd think anyone could recreate really easily.
Here are the files that are having this problem:
ftp://ftp.clippermag.com/PhotoshopFiles/DAV44462.psd
ftp://ftp.clippermag.com/PhotoshopFiles/DAV44463.psd
ftp://ftp.clippermag.com/PhotoshopFiles/DAV44464.psd

Incorrect server. Not recognized when I try to receive emails

Unable to receive or get emails.
I accidentally put wrong server name
my settings on my Samsung tablet. Now my email doesn't recognize my server.

Edit the Incoming Settings and it should be fine.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How do I stop iCal from changing the server path of CalDAV accounts?

I'm using Davical as a calendar server for our family. Some may wonder why I use Davical and not iCloud. I do for one reason...there is no way to disable getting other users' alarms on the iPhone. I want to be able to view my wife's calendar but not get her alarms and have her be able to view my calendar and not get my alarms.
So, now onto the issue with server path setting changing in iCal. We each have our own calendar set up within our own accounts on our Davical server. We each have read access to the other's calendar. Within iCal account settings I have her account set up on my Mac with my username/password (jason/****) and, under server settings, the server path points to her calendar /caldav.php/juiper/). After a few days, sometimes just a few hours, suddenly I will have duplicate events throughout my calandar in iCal. Going to preferences I will see that the server path for her calendar will have been changed to the location of my calendar (/caldav.php/jason/). I'll correct the server path, restart iCal and then the calander will be correct for a while unitl the server path is automatically and incorrectly changed again and I must manually correct it again.
Thanks!

My coworkers and I use DavMail to share access to a shared Exchange calendar, authenticating with our own ADS credentials. We also see the behavior where iCal will reset the CalDav calendar path to the username (our own) that is authenticating to the CalDav service. In Lion this wasn't a deal breaker for us. While very annoying, the work around was simple. Update the path via preferences, and restart iCal. However in Mountain Lion, the issue has become a lot more difficult to fix. It's no longer a matter of updating the path via preferences and restarting.
In Mountain Lion the solution to change the CalDav path back to the original path requires you to edit the file ~/Library/Calendars/<somehash>.caldav/Info.plist
Contained within this file is a value "CalendarHomePath", simply update the string to your desired path, clear out the 'Calendar Cache' file for good measure, then restart iCal.

Server Path for iCal users

I hope this doesn't come off as a dumb question... and I'm not really sure how to ask it.
The server path for users in iCal are found at /principals/_uids_/really long string of random characters. Is this correct? Shouldn't they be found at /principals/_uids_/username
Is something miss-configured on the server? Or am I missing something?

If you're using a Snow Leopard client, you should not need to enter a path, only the credentials and server name (if you specify the calDAV service).
For 10.5 clients, I had to use:
http://server.domain.com:8008/prinicpals/users/usershortname
or for secure:
https://server.domain.com:8443/prinicpals/users/usershortname
If you have to use the <uid> to make it work, you're in a world of hurt. As I understand it, that directory tracks individual events for the calDAV service, not the complete calendar.
Good luck.
J

Archived files not recognized accurately on server

Some Archived files on our server are not recognized (Unix Executable). Was able to use them before "Lion" when we were connecting as afp:, now as smb: we cannot, why?

How are they connecting? What Service?
Any particular APPs that do this? Adobe perhaps?

The email server did not recognize your user name/password combination

email server did not recognized your username/password combination

I found that by turning of the SSL option at the bottom of the Accounts panel did the trick.

Dreamweaver 2004 MX is not recognizing my form elements

Has anyone run into a problem with an insert or update server
behavior not recognizing form elements? I created the page and now
when I try to make any changes I get an error.
"Column 'sccb_comments' is mapped to a form element that does
not exist. Please map the column to an existing form element or set
its value to 'None'."
The problem is that the insert dialog box recognizes the
form, but not any of the elements in it.
I know that I need to upgrade to CS4, tell my director to
cough up the funds.

There must be something else happening on your page. But I
have no idea
what that might be. This should work. Sorry.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Reidster" <[email protected]> wrote in
message
news:[email protected]...
> Murray,
>
> You replied,
> "It wouldn't matter. It's perfectly valid to have
<div> tags in side
> <form>
> tags. And it's not DW's preferences you need to worry
about - it's HTML's
> preferences, so to speak. I suspect that something else
entirely is
> causing the
> problem. Without seeing your code, though, we cannot
know what that might
> be."
>
> Sometimes what should work or one would think should
work doesn't. As in
> my
> case, the <div> tags inside my for was the issue.
Here is the original
> code
> that did not allow me to assign form objects to fields
in my database. The
> server behavior also displayed an '!' in the application
window until I
> moved
> the <div> tags outside of my form.
>
> <form name="frmEditRelease" id="frmEditRelease"
method="POST"
> action="<?php
> echo $editFormAction; ?>">
> <div id="new_prod_rel">
> <p><select name="sccb_status"
id="sccb_status">
> <option value="0" <?php if (!(strcmp(0,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
?>>Open</option>
> <option value="1" <?php if (!(strcmp(1,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
> ?>>Pending</option>
> <option value="2" <?php if (!(strcmp(2,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
> ?>>Approved</option>
> <option value="3" <?php if (!(strcmp(3,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
?>>Denied</option>
> <option value="4" <?php if (!(strcmp(4,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
> ?>>Deleted</option>
> <option value="5" <?php if (!(strcmp(5,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
> ?>>Deferred</option>
> </select>
> <label for="sccb_status">SCCB Status</label>
> </p>
> <p>
> <select name="sRelease">
> <?php do { ?>
> <option value="<?php echo
$row_rsProj['project_vchar']?>"
> <?php
> if (!(strcmp($row_rsProj['project_vchar'],
> $row_rsEditRelease['release'])))
> {echo "SELECTED";} ?>><?php echo
$row_rsProj['project_vchar']?></option>
> <?php } while ($row_rsProj =
mssql_fetch_assoc($rsProj));
> $rows = mssql_num_rows($rsProj);
> if($rows > 0) {
> mssql_data_seek($rsProj, 0);
> $row_rsProj = mssql_fetch_assoc($rsProj);
> }
> ?>
> </select><label for="sRelease">
Release</label>
> </p>
> <p>
> <select name="lifecycle">
> <option value="System Reqts." selected="selected"
<?php if
> (!(strcmp("System Reqts.",
$row_rsEditRelease['lifecycle']))) {echo
> "SELECTED";} ?>>System Reqts.
> <option value="Analysis" <?php if
(!(strcmp("Analysis",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Analysis
> <option value="Design" <?php if
(!(strcmp("Design",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Design
> <option value="Code" <?php if (!(strcmp("Code",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Code
> <option value="Testing Phase 1" <?php if
(!(strcmp("Testing Phase
> 1",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Testing Phase 1
> <option value="Testing Phase 2" <?php if
(!(strcmp("Testing Phase
> 2",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Testing Phase 2
> <option value="Alpha" <?php if (!(strcmp("Alpha",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Alpha
> <option value="Beta" <?php if (!(strcmp("Beta",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Beta
> <option value="Gen. Release" <?php if
(!(strcmp("Gen. Release",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Gen. Release
> </select><label for="lifecyle">
Lifecycle</label>
> <input name="sub_ticket_id" type="hidden"
id="sub_ticket_id"
> value="<?php echo
$row_rsEditRelease['sub_ticket_id']; ?>">
> </p>
> <p>
> <input <?php if
(!(strcmp($row_rsEditRelease['test_only'],1)))
> {echo
> "checked";} ?> name="test_only" type="checkbox"
id="test_only" value="1">
> <label for="test_only">
Test Only
> <input name="ticket" type="hidden" id="ticket"
value="<?php echo
> $row_rsEditRelease['Ticket']; ?>" />
> </label>
> </p>
> <p><label for="sccb_comments">SCCB
Comments</label><br /><textarea
> name="sccb_comments" cols="60" rows="5"><?php echo
> $row_rsEditRelease['sccb_comments'];
?></textarea>
> </p>
> <p>
> <input type="submit" name="Submit" value="Submit"
/>
> </p>
> </div>
> <input type="hidden" name="MM_update"
value="frmEditRelease">
> </form>
>
> It's not until if move the <div> tags outside of
the <form> tags does the
> '!'
> on the update server behavior go away.
>
> Any thoughts?
>

Oepe not recognizing WLS 12c server home

I have installed oepe from oepe-12.1.1.2-juno-distro-win32-x86_64.zip and WLS 12c from wls1212_dev.zip which is a generic installer downloaded from Oracle. When I tried to add WLS 12c runtime environment in oepe, its not recognizing the WLS home. Its throwing following error "The path "C:\Servers\wls12120\wlserver" does not contain a valid WebLogic Server install."
But I can start server using .cmd files and its running perfectly. Need help on this one. How to make oepe recognize my wls 12c home?

Hi,
You will just need to get a copy of OEPE that is v12.1.2 or higher in order to deploy to WebLogic Server 12.1.2. OEPE 12.1.2.2 is the current version and can be downloaded from the main download page - http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html
Thanks,
Greg

Hard drive not recognized during windows server 2008 setup

hard drive not recognized during windows server 2008 setup

Hi,
Whether the hard disk is recognized in BIOS?
Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
a suitable driver is installed.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I keep getting a popup error message in Ical "server does not recognize name/password

I keep getting a popup error message in Ical "server does not recognize name/password" This started after they did the change to Icloud and extended our subcriptions.
Tricia

I guess that the server name is incorrect, then.
Did it ever work?
Delete the account, reboot the phone, then add it back and be sure you choose Yahoo as the mail server type. Everthing should then fill in automatically except your user name and password.

Server path not recognized on ical

Similar Messages

Maybe you are looking for