SMPT server does not recognized when send email use POP3

I can not send email from outlook on Mac Pro - I use the same server for incoming and out going, incoming email well receive but not outgoing and one can help ?
it notice show as bellow
Error - Through this server
Can not send email. The SMTP server does not recognize any of the authentication methods supported by outlook. Try change your SMTP.... I use the same server for incoming and out going, incoming email well receive but not outgoing and one can help ?

The problem is probably the wrong host name. If you have an MSN account the outgoing server may be different than it is for Hotmail. If you log in to your web mail account and go to the Support page you should be able to find instructions to set up POP3 mail. In those instructions should be the host name, port, and any other settings you need.
Usually you just enter the first part of your email address as the user name, but you should be able to confirm this in the POP3 setup instructions. If the user name alone doesn't work then try the full email address. Also, if you have a login name to MSN that is different from your email address you can try that also.
Regarding the "<hostname>:25" entry, many people have found that email sends faster if you specify the port number; if you don't, the iPhone tries all possible ports which can take several minutes. This isn't your problem, but it is good practice to specify the port number. In versions before 1.1.1 the only way to do this was to put the port number after the host name, separated by a colon. In 1.1.1 there is a separate field for in in the Advanced settings.
It would be helpful to know the error message you are getting when you try to send. That will determine whether the iPhone is not finding the server, or is finding it but the send is being rejected by the server.
Keep at it; there is a way to get it to work.

Similar Messages

Outgoing server does not work when I email

I have set up my iPhone tu work with Hotmail and it works with the ingoing server but I can't send mails. When I try to send mails it says: The connection to the outgoing server smtp.live.com failed.
Can anyone help.
I am a premium hotmail user.

The problem is probably the wrong host name. If you have an MSN account the outgoing server may be different than it is for Hotmail. If you log in to your web mail account and go to the Support page you should be able to find instructions to set up POP3 mail. In those instructions should be the host name, port, and any other settings you need.
Usually you just enter the first part of your email address as the user name, but you should be able to confirm this in the POP3 setup instructions. If the user name alone doesn't work then try the full email address. Also, if you have a login name to MSN that is different from your email address you can try that also.
Regarding the "<hostname>:25" entry, many people have found that email sends faster if you specify the port number; if you don't, the iPhone tries all possible ports which can take several minutes. This isn't your problem, but it is good practice to specify the port number. In versions before 1.1.1 the only way to do this was to put the port number after the host name, separated by a colon. In 1.1.1 there is a separate field for in in the Advanced settings.
It would be helpful to know the error message you are getting when you try to send. That will determine whether the iPhone is not finding the server, or is finding it but the send is being rejected by the server.
Keep at it; there is a way to get it to work.

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

I keep getting " server did not reply " when sending picture in email from iPhoto ?

MAC/ Yosemite / Iphoto : I keep getting " server did not reply " when trying to send picture using the email function in iPhoto ?

in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
OR
IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
LN

Reply-to function in Gmail does not work when sending from iPhone

I'm using Gmail for my iPhone and have the "reply-to" function set up so that recipient's of emails will reply to my business email address and not reply back to my gmail address. It works fine when sending emails directly from Gmail on the web interface. However, when I use the iPhone to send an email, the recipient gets my gmail address when replying to me. They do not the get "reply-to" email address. This seems to be an iPhone issue. I noticed another post about this issue involving Yahoo reply-to acting the same way with the iPhone and replied to that regarding my gmail experience. Are any other gmail users experiencing the same thing with the reply-to function? Any suggestions on how to fix?
Thanks

Setting the reply-to on the web interface does not change the reply-to on the iPhone. In order for you to specify a different reply-to on the iPhone, you need to configure your GMail account using the "Other" shortcut, not the GMail shortcut. The Other shortcut allows you to specify your work ID as the address, and your GMail ID as your login for incoming and outgoing servers.

I have recently bought a macbook and am using outlook 2011 as email. i am getting an error message 4.7.0 not allowed when sending emails how do I fix?

i have a macbook and am using outlook 2011 as email. receiving okay. sending okay sometimes. am now getting error message 4.7.0 not allowed when sending. what is the cause? how do I fix please?

I have discovered that the emails have in fact been sent but much later, maybe it's a network problem with the people i am sending it to. so i checked my sent items and they are there, but at the time the email doesn't go straight into the sent box or drafts so i'm assuming it's disappeared and type it again. i'll keep going with it, until someone can give me a possible solution or explanation as to what is happening.

TS3899 Why do I keep getting emails downloaded over and over again. It seems that iCloud does not recognize when the emails have already been downloaded to my iPad.

Why do I keep getting mails from iCloud over and over again? It seems that iCloud does not recognize that the emails were previously downloaded.

Does the iPhone NOT tell iTunes if you've played a track or not?
Yes, but the entire track must be listened to - until the track ends.
A song is not marked as played until the song has completed and the iPod starts playing the next song. The song must be played until the very end, and the same with a podcast.

Javascript error when send email using webmail

Dear Sun,
One of our user encounter javascript error when try sending email using webmail below is the error message:
" +https://webmail.ubd.edu.bn/uwc/webmail/comp_fs_lr.html&rev=3&security=false&lang=en&popupLevel=undefined&cal=1&charset=escaped_unicode, Line 1755+
+Permission denied+
"

Hi Shane,
below is the answer you need
What browser is the user using?
=> Firefox and IE
What browsers have you tested where it doesn't occur?
=>I tested all the browser (firefox,IE, chrome) it doesn't happen to me
When did this problem first start?
=>After the user finish compiled his message and click send
What is the exact version of UWC you are running (./showrev -p | grep uwc)
=>Patch: 122793-26 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
Patch: 122793-29 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
Patch: 122793-31 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
Does this error occur all the time? Does it occur for every user, or some users or just one user?
=> Not all the time, so far i just receive one complaint .

Youtube does not work when i am using wifi on iphone 4

the youtube does not work when i use wifi. it works perfectly when i use 3 g network ..

At home when i use my Wi-Fi it work normal, but as soon as i go out, for example on the bus or at work it keeps saying "Cannot connect to Youtube".

N97mini email app does not receive and send emails

I have installed Nokia email app (build 10.2.0.26 (main)) onto my N97mini. I have setup it up to fetch emails from my gmail and yahoo mail accounts. I also added gadgets to my screen so that I can view incoming emails. It worked before. But now, it stops fetching emails. When I go options->tools->connection info, it always shows offline mode.
I use several wifi network between home and school. Other app like opera works fine. I can use opera to access my gmail. When I do options->Send/receive, nothing happen. The icon on the top of the email screen is always a circule with a slash. So it means offline mode. I suppose when I click Send/receive it should go online to check emails. But it does not. Very few times, it goes online and checks email by itself. But I have no idea what triggers that.
The setting is:
what to sync [Inbox] = sync enabled
when to sync [days] = 7 days; [hours] = on all day; [disable sync when] = battery at 15%; [Send and receive] = soonest;
Please advice what do I miss here?

now my one account works perfectly without any additional changes, but my other one works not.
it shows that my password or username is wrong then i deleted it, created it new. after typing password and username 10 times right it worked. i got my emails and one minute later the same problem again...
i really do not understand the problem... i use the same preferences for the other account and it works, and everything worked untill yesterday. seems like it works if the iphone just wants to.
i am feeling like using windows
my provider is gmx. pop account information with my adress and name, server for incomming emails: hostname is pop.gmx.net username and password are correct.
thank you.

Lync presence coloured square not working when sending email in Outlook 2013

OK, I'm running Lync 2013 & Outlook 2013.
When I send an email from Outlook the small Lync presence icon that appears in the "To" field after you type the user your sending the email to does not appear. You get the user name but where the coloured square should be it's just white
(like the background colour).
If I hove the mouse pointer over the user name the pop-up contacts box shows the Lync presence correctly.
At the bottom of the new email window, the Lync presence is always shown correctly.
This happens for users with or without pictures set as their Lync icon.
I've completed a repair of the Office install without success. Also uninstalled Lync & Office and re-installed but still no joy. Also tried creating new Outlook profile but this didn't work.
If I create a brand new Windows 7 profile, and then create a new mail profile it works fine. So, it must be a user profile problem. Hopefully someone can point me to a registry key or something as I'd rather not go through the pain of migrating
to a new user profile.
Thanks.

Hi,
If we need to show the Online status for contacts, just go to FILE tab ->
Options -> People -> check Display online status next to name ->
OK.
Please also try the steps below:
Lync -> Options -> Personal -> Under
Personal information manager -> Select None ->
OK.
Go to Outlook, People, Right click on Lync Contacts and
Delete Folder.
Then go back to Lync to the same options, choose Microsoft Exchange or Microsoft Outlook, go back to Outlook let the Lync contacts sync again to check the result.
Regards,
Melon Chen
TechNet Community Support

Video does not display when sending from Final Cut Pro to Motion

Suddenly, when sending an audio & video sequence to Motion, a new Motion file is created, and all my layers come in properly, but the video does not display.
The audio plays fine, and Motion clearly know that there are video tracks there, but it does not display them.
Additionally, when rendering the Motion file back in FCP, it turns in to black video.
I have previous sequences within the same project that were sent just fine, and are editable properly, but any new ones I try to create just come out black.
Help, please?

Do you have Motion mistakenly set to render out with an Alpha channel?
Double click your Motion clip in the Timeline. Go to Modify > Composite Mode in the menu bar and set the Alpha to "None/Ignore".

Group addresses not added when sending email - only group name

Just helping a friend use Thunderbird on a new PC with Win 7 Prof. Previously he used Outlook Express under Win XP.
Downloaded latest version of Thunderbird. Imported old wab file as suggested using "morefunctionsfor..." . The old (complete) address book was imported correctly into a new address book in Thunderbird. It contained several groups. Each of these is correctly listed underneath the new address book and they also appear in the new address book. Clicking on any group correctly shows the list of addresses for that group.
However, if one selects a group and sends an email to that group ONLY the name of the group appears in the TO field and the email fails to send. Closer inspection of the contents of the address field show that only the group name and NOT the constituent addresses are being included.
Thanks

My problem is that groups are no longer recognised and cannot be used to send emails. Does Mozilla respond to this problem or do we have to wait for a clever user to find the solution? The problem for me is fundamental and will shortly affect whether I have to find an alternative program.

Mail and Bellsouth Not Working When Sending Emails

I've seen this mentioned a few times in regard to Leopard 10.5.2, but I haven't really seen an answer for my situation. I have Bellsouth DSL and Leopard 10.5.2. Ever since I upgraded from Tiger, I have no been able to send emails. I can receive them just fine, but cannot send them. I've read that Bellsouth (ATT) is blocking the port, but I've tried many subs and still cannot get it to work. Can someone give me step by step instructions on how to get this working again? By the way, I can go to the Bellsouth website and send and receive emails just fine, so I know it must be a failure to communicate somewhere between my Mail app and the Bellsouth server. Thanks for the help!

Hi! Have you followed THESE instructions/ Tom

My IPad Retnia does not charge when plugged in using the USB from my computer to car adapter, how can I fix this to be able to have flexibility in charging?

When I plug me IPad into the USB connector to my laptop or into my car charger, it show as not charging. How can I fix this so that I can charge my Pad in these settings?

Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
And this - Unplug the charger from the iPad and then replug. May resume charging.
Or - Recalibrate the battery. See link below.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

SMPT server does not recognized when send email use POP3

Similar Messages

Maybe you are looking for