Server Proxies List

Hi,
Is there a function module that can give me a list of all available server proxies?
Thanks in advance for your help !
-Zafar

Hello Zafar
If you mean ABAP object interfaces used as server proxies (see <a href="http://help.sap.com/saphelp_nw04/helpdata/en/c9/74246d8ad2447799063d39013e9a11/content.htm">Online Documentation</a>) then you have to call transaction SPROXY.
Regards
Uwe

Similar Messages

ABAP server Proxies

Hi
Can anybody list down the steps that need to be configured (in XI and R/3) system for executing ABAP server proxies?????
specifically, i am looking for steps that would connect XI with R/3 . There are a few issues we are facing during runtime in sxmb_moni.
it would also be helpful if someone can give a technical description of the ABAP server proxy runtime.
Note:I have seen the blogs that describe how to create ABAP server proxies
Thanks and regardsk
krishna

hi Jai
In XI , under sxmb_adm , the value for
Role of business System is : Integration server 
and the value for Corresponding Integration Server is the value that is defined in SLD for the XI business system.
In R/3, under sxmb_adm , the value for
Role of business System is : Application System
Here , we are not able to pull the value for Integration Server due to the following error
No access to system landscape present.
In R/3, the sldcheck fails with the error
"No business system maintained in SLD" but if i check in SLD, there exists a Business system.
Regards
krishna

How to add a certificate to IIS global "Server Certificates" list using PowerShell?

Hi, been surfing the web for an example on how to add a certificate to the "global" IIS "Server Certificates" list using PowerShell but to no luck. I already have code in place on how to tie / associate a specific website with a specific cert but not how
to add the new .cer file using the "Complete Certificate Request..." wizard using PowerShell.... I dont expect the final code to become published but if someone had an idea on howto integrate / get an entry point on where to interact between the "Server Certificate"
list in IIS and POSH I would be super happy! :|
I am runnign IIS on a Windows 2008R2 x64 Standard Edition if that helps..... of course, I would saddle for an CLI if there is no other way, but POSH is of course the way to go! :)
Thanks for the help in advance guys, take care!
br4tt3

Hi and thanks for the suggestions!
Although it comes close, the suggested code example points on howto import / incorporate .pfx files - I am getting fed by .cer files which I need to add into the IIS console using POSH.
I tried explore the IIS.CertObj object but was not able to work out if this one could be used for importing / adding .cer files into IIS! However, launching the following command from a POSH console with Import-Module Webadministration already
loaded into that shell;
$certMgr = New-Object -ComObject IIS.CertObj returns the following error message:
New-Object : Cannot load COM type IIS.CertObj
From an IIS perspective I have the following components installed;
[X] Web Server (IIS)                                    Web-Server
    [X] Web Server                                      Web-WebServer
        [ ] Common HTTP Features                        Web-Common-Http
            [ ] Static Content                          Web-Static-Content
            [ ] Default Document                        Web-Default-Doc
            [ ] Directory Browsing                      Web-Dir-Browsing
            [ ] HTTP Errors                             Web-Http-Errors
            [ ] HTTP Redirection                        Web-Http-Redirect
            [ ] WebDAV Publishing                       Web-DAV-Publishing
        [X] Application Development                     Web-App-Dev
            [ ] ASP.NET
Web-Asp-Net
            [X] .NET Extensibility                      Web-Net-Ext
            [ ] ASP
Web-ASP
            [ ] CGI
Web-CGI
            [ ] ISAPI Extensions                        Web-ISAPI-Ext
            [ ] ISAPI Filters                           Web-ISAPI-Filter
            [ ] Server Side Includes                    Web-Includes
        [ ] Health and Diagnostics                      Web-Health
            [ ] HTTP Logging                            Web-Http-Logging
            [ ] Logging Tools                           Web-Log-Libraries
            [ ] Request Monitor                         Web-Request-Monitor
            [ ] Tracing
Web-Http-Tracing
            [ ] Custom Logging                          Web-Custom-Logging
            [ ] ODBC Logging                            Web-ODBC-Logging
        [X] Security
Web-Security
            [ ] Basic Authentication                    Web-Basic-Auth
            [ ] Windows Authentication                  Web-Windows-Auth
            [ ] Digest Authentication                   Web-Digest-Auth
            [ ] Client Certificate Mapping Authentic... Web-Client-Auth
            [ ] IIS Client Certificate Mapping Authe... Web-Cert-Auth
            [ ] URL Authorization                       Web-Url-Auth
            [X] Request Filtering                       Web-Filtering
            [ ] IP and Domain Restrictions              Web-IP-Security
        [ ] Performance                                 Web-Performance
            [ ] Static Content Compression              Web-Stat-Compression
            [ ] Dynamic Content Compression             Web-Dyn-Compression
    [X] Management Tools                                Web-Mgmt-Tools
        [X] IIS Management Console                      Web-Mgmt-Console
        [X] IIS Management Scripts and Tools            Web-Scripting-Tools
        [ ] Management Service                          Web-Mgmt-Service
        [ ] IIS 6 Management Compatibility              Web-Mgmt-Compat
            [ ] IIS 6 Metabase Compatibility            Web-Metabase
            [ ] IIS 6 WMI Compatibility                 Web-WMI
            [ ] IIS 6 Scripting Tools                   Web-Lgcy-Scripting
            [ ] IIS 6 Management Console                Web-Lgcy-Mgmt-Console
    [X] FTP Server                                      Web-Ftp-Server
        [X] FTP Service                                 Web-Ftp-Service
        [X] FTP Extensibility                           Web-Ftp-Ext
    [ ] IIS Hostable Web Core                           Web-WHC
More or less the one thing that I am trying to get up and running is an automated FTPS solution - I just use the IIS console to be able to troubleshoot / compare how things scripted from POSH interacts in the MMC representation. The error I am getting
might be that I am lacking some IIS components to be in place to be able to automate some parts of the IIS - as suggested by the IIS.CertObj object listed in the example..... I will get back if I can track down which component needs to be added to be
able to reference the IIS.CertObj object.
Br4tt3 signing out...
br4tt3

Getting List of SQL server and on selection of server get List of Databases using SMO

Hi,
I need to have functionality where I need to populate List of available SQL servers from local network, and when i select SQL server from list, get the list of Databases from that Server.
For this i referenced SQL SMO Dll's and placed two drop down, one lists Server names, and one lists Database names.
Dlls refered are:
Microsoft.SqlServer.ConnectionInfo.dll
Microsoft.SqlServer.Management.Sdk.Sfc.dll
Microsoft.SqlServer.Smo.dll
Microsoft.SqlServer.SqlClrProvider.dll
Microsoft.SqlServer.SqlEnum.dll
Above DLL's i have copied from SQL server SQL server 2008 installed location
C:\Program Files\Microsoft SQL Server\110\SDK\Assemblies
DLL version : 11.0.3000.0
Code i have used is:
private void MainForm_Load(object sender,
EventArgs e)
   DataTable dataTable = SmoApplication.EnumAvailableSqlServers(false);
   cmbServers.ValueMember = "Name";
   cmbServers.DataSource = dataTable;
//Now, load Databases on selection of Server combo box.
private void cmbServers_SelectedIndexChanged(object sender,
EventArgs e)
   cmbDatabases.Items.Clear();
   if (cmbServers.SelectedIndex != -1)
      string serverName = cmbServers.SelectedValue.ToString();
      Server server = new Server(serverName);
      try
         foreach (Database database in server.Databases)
            cmbDatabases.Items.Add(database.Name);
      catch (Exception ex)
         string exception = ex.Message;
It works where SQL server is installed, but in systems where no SQL server is installed, it is not working, it is not returning list of SQL server and so database list.
Query is> can you please help me in this regard, what i am missing here, do i need to install any client component to use this?, or anything else what i need to do to make this functionality work.
Thanks,
Hemal

Thanks Michael for replying.
I have gone through the reply, and the link on how to get the SMO library installed.
"To install the Client Tooks SDK without installing SQL Server, install Shared Management Objects from the SQL Server feature pack.
If you want to ensure that SQL Server Management Objects is installed on a computer that will run your application, you can use the Shared Management Objects .msi in the SQL Server feature pack."
I have few questions on "Shared Management Objects .msi"
Where do i get "Shared Management Objects .msi".
only installing this msi will install SMO?.
Can i ship this msi with my application installer?
do i need to install x86 on x86 system and x64 version of msi in x64 system, or x86 can work fine with both, my application
is x86 only.
Thanks,
Hemal

Abap proxies ( Client and Server proxies)

Hi Team
Good day to you. I am now started doing some example scenarios on ABAP proxies(ie Client and Server proxies). After going through the blogs which are avialable, i am writing this question to you for clarification.
As per my understanding, the below are the required predefined settings which i need to do in my landscape to generate abap proxies(ie client and server proxies).
My landscape includes the below systems.
System A : SAP XI 3.0 system and
System B : SAP R/3 on WAS 620
SAP R/3 predefined Steps
1.Create HTTP connection in the business system.
2.Configuration Business system as local Integration Engine.
3. Connection between Business System and System Landscape Directory.
4. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
(Here in the step 4, i found the below needs to be done)
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
 Program ID: LCRSAPRFC
 Gateway Host: <Integration Server host>
 Gateway Service: <Integration Server gateway service>
 Number of process: 3
4. Under Repository specify the following:
5. Choose Set.
Application Server: <Integration Server host>
(i am not able to perform the steps which comes under point 4. so please Guide me how to goto J2EE engine and configure accordingly.
5. Maintain SLD access details in Transaction SLDAPICUST.
As per my understanding, i need to do the above predefined configuration steps in SAP R/3 system (ie bussiness System) for doing Abap Client or Server proxies.
And in the meantime, i would like to know whether i need to do any predefined configuration steps in XI 3.o system also. Please check and suggest me accordingly.
Once i get clarification on predefined configuration steps, i will proceed with the example scenarios on client and server proxies which are already in SDN.
Thanks in advance.
Regards
Raj

Hello Pavan
thanks for your response. you said that for the connection type 'H' we need to provide values for GATEWAY HOST and GATEWAY SERVICE but here i need to create the RFC destination of type 'T'. so please tell me whether i need to give the values for GATEWAY HOST and GATEWAY SERVICE for connection type 'T' also and the second thing is please tell me the difference between Application system and bussiness system accordingly to my landscape which i mentioned in my question.
I am in little confusion because as per the requirement for abap proxies in the blog they mentioned that all these setting should be done in the bussiness system (ie SAP R/3) but you are saying that Application system. so please clarify.
My landscape which i am going to use in Abap proxy generation
System A: XI 3.0
System B: R/3
Here which is bussiness system and which is application system. Pls calrify.
Thanks in advance.
Regards
Raj

Call transaction can be executed in SERVER proxies

Hi Experts,
Can any one pls let me know whether we can execute the call transaction in Server side proxies.
The scenario is File - Proxie - File .
Regards
Santosh.

Hi Sivan,
You are calling a report in server proxies and from report you can call transactions. So it is possible
Never tried though, you can try calling it.
Are you trying to call any BDC?
Regards
Suraj

HTTP Error with Status code 403 when using ABAP Server Proxies

Hi All,
I have been working on ABAP Client and Server proxies in my project. The weblogs by Ravikumar, Prateek Shah, Siva Maranani & VijayaKumari were very helpful and thank them all for just helpful and guiding postings.
Interfaces using Client proxies are working fine and have been tested successfully. But I'm facing bit problems with Server Proxies. The scenario is of File to SAP system via XI. Data is coming correct up to Technical routing in pipeline but at call adapter(for Server Proxy to SAP)in XI pipeline I receive Error:
HTTP response contains status code 403 with the description Business Server Page (BSP) Error Error when sending by HTTP (error code: 403, error text: Business Server Page (BSP) Error)
Previously I was receiving authentication and authorization related error of status code 401 and then in communication channel I replaced user profile with a user id having role SAP_XI_APPL_SERV_USER. The basis peron has created new user id with role SAP_XI_APPL_SERV_USER only and that I'm using. I've tried creating a HTTP destination with the created user id and in test connection too receive same error message.
Please help me out with your inputs and understanding on the topic.
Thanks and Best Regards
Prashant Rajani

Hi Prashant,
Please take a look at these threads..They deal with the same problem, and they have been resolved here.
BSP Authorization error
Service cannot be reached . error code 403 the reason forbiddn
403 Error when accessing the server
Hope your issue gets resolved.
cheers,
Prashanth
P.S Please mark helpful answers

ABAP Server Proxies-- any help docs..?

Hi,
Only after completing my ABAP Client proxies, i found that there was a weblog on it. Now i am trying Server Proxies, i want to maximize the use of SDN. So can somebody tell me where there any any blogs posted on server proxies...?
kindly provide me the good links for Server proxies.
Regards,
Christina.

Hi,
For server proxies,
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Also refer to:
http://help.sap.com/saphelp_nw04/helpdata/en/62/8a5f3c31727d59e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
Regards,
Sridhar
Message was edited by: Sridhar Rajan Natarajan

How to add "Weblogic Server Adapter" from "download additional server adapter" list.

"Weblogic Server Adapter" is not shown in "download additional server adapter" list in STS 3.6. How to add It.

George, What deployment do you have this associated with?
- D.J.

Client / server proxies

Hello Friends,
I have a confusion, thought to disucss with you guys
So the problem is as follows that, there is a WSDL I create the client proxies , though I dont know why to create the proxies, and what is the difference between client and server proxies. Any way now I want to call the web services via these proxies, ( can any one pls let me know how to do that ), and then I saw in docu that, one requires the PROSY ENVIRONMENT to run the proxies, and I have to set the virtual ports and etc... so my question is if there is web services somewhere on net, then every customer has to set this proxy environment / generate the proxies ? etc...
Hope I am clear enought, else pls ask / correct me...
Many thanks in advance..
Shah H.

check this weblog for clarification
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Regards
Raja

What is the imcoming and outgoing mail server for list.ru

what is the imcoming and outgoing mail server for list.ru

Contact your email service provider for that information. It's not a Firefox support issue.

Error Message when attempting to connect to server directory List View.

I just transferred my entire Mac (User, Hard Drive Files, Network, Time & Date) from one MacBook Pro 2.4 Ghz to another MacBook Pro 2.4 Ghz machine. Everything seemed fine but the following.
My computer connects to a Mac OS X Server (10.5.2) in our office. After I connect to the directories by going to (Finder > Go > Connect to Server) and mount the directory to my desktop, I drag the directory to my Dock for one click access. Due to the shear volume of files in the directory, it is preferred to display the directory in a list (view). Following me so far? When I click the directory in the dock, the files appear in list view above the directory (as expected). However, here's the issue. *When I click on a folder in the pop up list of folders, I receive the following alert.*
*The application cannot be launched.*
-35
I then hit OK.
Now, if I switch the view to Grid and click on a folder, no problem, the folder opens up in the Finder.
I am stuck on why this is happening and can't seem to find out what this -35 error represents.
Extra Note: I have already ejected the desktop mounted icon and trashed the alias from the dock and then reconnected all of them with no luck.
Thanks for any help you might be able to provide.
Regards,
Brent

Thanks for the comments and suggestions. I just spoke to an Apple Consultant and he claims he has seen the same error occur with his client's machines when he upgraded them to 10.5.3. He did offer a possible work around that I will try and let you know if it works.
He suggest I connect to the server/shared directory and mount it to my desktop. Then create an alias of that directory and hide it somewhere in my home folder (~/Documents/Server). Then drag that alias icon to my dock. Disconnect the directory still mounted on my desktop. With no directories connected, click on the alias in the dock and have it pull up the list view. He claims it works. Again, I will try it and report my findings.
- Brent

How To Populate Application Server Dropdown List In JCo Destination

Hi guys, I'm currently working on EP7 and just finished installing the ESS Business Package. The next step is to maintain the JCo Destinations in the Web Dynpro Console and here's where I got stuck. When I got to step 4.1 the field for the Application Server is a drop down list with no items in the list. How do you populate this list? Thanks in advance!

Figured it out! Maintain an Web AS ABAP Technical System in the SLD.

Added server not listed in Server pool (not even on the list of servers)

Hello VM Gurus,
I'm playing with Oracle VM and I've encountered problem I can not solve of find existing solution.
I'm playing with Oracle VM version 2.1.5.
I have 3 psychical machines (let say A,B,C). On every machine I have installed WMWare workstation. I've created all together 5 VMWare virtual machines.
On Physical machine A I have 1 VMWare virtual machine named A1. This is used as Virtual Machine Server.
On Physical machine B I have 2 VMWare virtual machine named B1 and B2. B1 is used as Oracle VM Manager. B2 is used as Virtual Machine Server (also Server Pool Master and Utility Server)
On Physical machine C I have 2 VMWare virtual machine named C1 and C2. Both are used as Virtual Machine Serves.
1. I've Created Pool of servers (HA set up) and first added server B2.
2. After that I've added to pool A1 without any problems
3. After that I've added to pool C1 without any problems.
3. After that I've tried to add to pool C2. Process (wizard "Add server") finishes without any problems. But server does not appear on the list of servers in pool. It does not exist On a list of servers neither. If I try to add server again I got error OVS-2005 saying that this server is part of another Pool.
If I stop agent on C2 , delete folder /etc/ovs-agent/db and start agent, I can again add server, but results are same (it does not appear on list of servers. Another try to add server results in OVS-2005 error).
If done also this process:
1. I've stopped agent on C2, deleted folder /etc/ovs-agent/db and starte agent
2. I've removed C1 from pool
3. I've added C2 to pool without any problems
4. I've tried to add c1 to Pool. Same problems as in the past with C2 (not appearing on the list of servers).
I went though agent logs, VM manager logs. I ca not spot any problems. I've connected to database with SQL plus and there was no evidence of failed server there (so data is really not written to repository).
I run out of ideas. What could be wrong? where to look whyt is problem. How to diagnose problem. I believe that Oracle VM somehow treat this two VMWare servers as one, but I can not prove this.
Somebody else had this problem? Any hint what to diagnose further? I understand my configuration is a bit stupid, but I'm trying to get familiar with Oracle VM.
Any hint will be appreciated.
Regards
Darko

user465397 wrote:
I have 3 psychical machines (let say A,B,C). On every machine I have installed WMWare workstation. I've created all together 5 VMWare virtual machines.This is a really bad idea, btw -- if you have three physical machines, you should install Oracle VM directly on each machine. Or use one machine as the NFS server and Oracle VM Manager and the other two as Oracle VM Servers. Trying to run a Type 1 Hypervisor inside a Type 2 hypervisor is fraught with peril. I'm surprised you actually got this far, to be honest. :)

Regenerating Proxies - list view hangs client

Just wondering if anyone else has come up against this one?
If in the Asset window in the list view, and I attempt to regenerate proxies on a clip, the client freezes. I have to force-quit the client.
Upon restarting the client and inspecting the Search All Jobs I find that the regeneration of proxies did not occur (no surprise) and there is no record of it being actioned.
If in the Asset window in thumbnail view, and I attempt to regenerate proxies on a clip - no issue.

I, too, am suffering this same bug. I didn't realize it was only in list view until this thread. Thank you.
-Cory

Server Proxies List

Similar Messages

Maybe you are looking for