Server Service refused to start: Access denied

Hello,
I am trying to start a service:
- Server Service
General: C:\WINDOWS\system32\svchost.exe -k netsvcs
Log On: Local System Account
This service has no dependency.
I am getting an access denied... I am a Local Administrator on this server.
Windows Server 2003 Standard Edition Service Pack 2
PAE Enabled.
Which other place should I verify?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

I would check that KB; http://support.microsoft.com/kb/932762
"Could not start the Server service on Local Computer.
Error 5: Access is denied. "
Description of the error from that KB: The problem is most likely to occur if some third-party server becomes the master browser. When a Windows-based server is the master browser, it does not let any host that is advertising its share to use a server
comment that is larger than 48 bytes. When a third-party server message block (SMB) server becomes the master browser, it lets a host use a server comment that is larger than 48 bytes. In this case, when a Windows Server receives and tries to process the browser
list, the Server service crashes. This behavior occurs because there is an overflow that eventually leads to a heap corruption.
MCP | MCTS 70-236: Exchange Server 2007, Configuring

Similar Messages

"server does not exist or access denied"

On a particular family-oriented website, I keep getting this message when I try to access the site:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
/Include/ADOHelper.asp, line 137
No idea why, been there before, and this isn't a site anyone would have a reason to restrict. Any ideas would be helpful.

First see if SQLServer is up and running
Go to start-> run in machine where sql is installed and type services.msc
In services list check if SQLServer service is present and is running. If not started, start it and make start mode as Automatic
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.

Hi, I've seen questions about this error posted elsewhere but I'm not sure if the same issues applied.
I'm trying to connect to SQL Server from a VBA macro in excel. I've managed to do this with the code below where my query is return to cells in my active worksheet but for another query I want to run the data to be return is too large for Excel to handle
and so I'd like to save it as a .csv file but using the second example of my code I get the message "[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied". Since I have access to this database from the first example
of the code, I assume my conn.ConnectionString line of code is letting me down.
Can anyone help me please?
'Code to return data to worksheet'
Sub macro2()
With ActiveSheet.ListObjects.Add(SourceType:=0, Source:=Array(Array( _
"ODBC;DSN=SQLRA - OPENBET;UID=user1;Trusted_Connection=Yes;APP=Microsoft Office 2013;WSID=pdfdf3001;DATABASE=open;Network=DBMSS" _
), Array("OCN;Address=SQLRA_DB,55455;ApplicationIntent=READONLY;")), _
Destination:=Range("$BG$1")).QueryTable
.CommandText = Array( _
"select A.ev_oc_id, B.ev_mkt_id, A.ev_id, D.start_Time, Upper(Replace(A.[desc],'|','')) , A.result, COALESCE(A.sp_num, A.lp_num) , ", _
"COALESCE(A.sp_Den, A.lp_Den) from open.reporting.tevoc A, open.reporting.tevmkt B, open.reporting.tevocgrp C, open.reporting.tev D ", _
"where A.ev_mkt_id = B.ev_mkt_id and B.ev_oc_grp_id = C.ev_oc_grp_id and D.ev_id = A.ev_id and Upper(Replace(D.[desc],'|','')) = 'home' and upper(B.name) = '|today|' and D.ev_type_id in (264, 289) and D.ev_class_id = 49
and D.start>= '" & Year & "-" & Month & "-" & Day & "'" _
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = True
.BackgroundQuery = True
.RefreshStyle = xlInsertDeleteCells
.SavePassword = False
.SaveData = True
.AdjustColumnWidth = True
.RefreshPeriod = 0
.PreserveColumnInfo = True
.ListObject.DisplayName = "Table_Query_from_SQLRA___OPEN_1"
.Refresh BackgroundQuery:=False
End With
End Sub
'Code that produces error'
Sub macro1()
Dim conn As ADODB.Connection
Set conn = New ADODB.Connection
Dim testSQL As String
Dim qd As DAO.QueryDef
Dim openbetdb As Database
conn.ConnectionString = "driver={SQL Server}; server= sqlra_db;uid=user1;APP=Microsoft Office 2013;WSID=pdfdf3001;database=openbet"
conn.Open
testSQL = "SELECT * FROM open.reporting.TevType where ev_class_id = 49 and ev_type_id in(289,330,518,13492);"
Set qd = Db.CreateQueryDef("tmpExport", testSQL)
DoCmd.TransferText acExportDelim, , "tmpExport", "C:\\export.csv"
End Sub

Hello,
Are you connect to remote SQL Server? If so,
please make sure the target SQL Server is running and is listening on appropriate protocols. Please take a look at the following article about general steps to troubleshoot
SQL connectivity issues:
http://blogs.msdn.com/b/sql_protocols/archive/2008/04/30/steps-to-troubleshoot-connectivity-issues.aspx
Regards,
Elvis Long
TechNet Community Support

[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.

I using SQL 2000 on Server 2012 in named instance. when i connect locally, it's ok, but when try to connect from network it generates error [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.

Hi Sayed Abdul Latif,
As other post, SQL Server 2000 was out of support since April,2013. You can try to install SQL Server 2005 or later version. In addition, since the issue regards SQL Server Data Access. I will help you post the question in the related forums. It is appropriate
and more experts will assist you.
According to your description, you can only connect to SQL Server locally, I recommend you check if the TCP/IP and Named Pipes are enabled in SQL Server Configuration Manager. And the SQL Server is set to allow remote connection. Then restart the SQL Service
and check if you can connect to SQL Server remotely.
Additionally, we also need to verify if the SQL Server named instance is in a cluster, and connect to it by using the "servername\instancename" syntax, then you receive the above error message. If yes, you have to hardcode the TCP port or the Named Pipe
of the SQL Server named instance. For more information, you can review the following article.http://support.microsoft.com/kb/888228/en-us
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi,
I have one client and one server. In both hosts I created an OS-user named User1.
The user have been given various role under the prefix SQLServer2005.
The default instance of SQL Server and instance (background-process) of
Analysis Service are also run under User1.
I connected via Management Studio to Analysis Service directly in the
server. I set the permission to access Analysis Service to Everyone.
This means everyone should be able to use Analysis Service. I have set
ODBC data source to the server. Testing was successful.
I created a project to create a cube. The tables are fairly small (total 300 MB, biggest one 290).
On project setting (created at client) I set the server host as
deployment target. I managed to deploy project when all I have are Data
Source and Data Source Views.
But on deployment I always failed. The errors remain the same, begins with
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
I have tried 4 combinations of Impersonation :
(A) Use a specific username and password
* in which I supply User1 and the password of User1
(B) Use the service account
(C) Use the credentials of the current user
(D) Default
Why is this? The server does certainly exist. I think the error message is wrong.
I have seen 3 posting that seems related. One of them say the solution is giving the right impersonation, but gave no detail. About the privilege, User1 are granted the role of
SQLServer2005MSOLAP. What is the solution?
Thank you,
Bernaridho

I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

EPMA server service is not starting

Hi All,
I'm unable to open dimension library,calc manager because EPMA server service is not starting.When trying to start the service EPMA Administration Server Service I'm getting the following error-"The Hyperion EPMA Server service on Local Computer started and then stopped.Some services stop automatically if they are not in use by other services or programs"
And while opening the Dimension library in EPMA I'm getting the following error-"No connection could be made because the target machine actively refused it 127.0.0.1:5251
Code:
com.hyperion.awb.web.common.DimensionServiceException
Description:An error occured processing the results from the server.
Actor:none
Kindly ley me know what could be the issue and how I can resolve it.
Thanks

Hi,
When you try to start the service, you will get this error.
So, please look into the Windows Event viewer for the Error meassage.
You can look into the DimensionServer.log and DimensionServer-err.log file for the error msg which vivek suggested you.
path for error logs: C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\epma
Regards,
mady

Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

SQL Server does not exist or access denied - periodic error

Hi There,
For the last week or so, I have been getting periodic errors on my sites powered by MSSQL databases. The error message is as follows:
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
Usually, a quick refresh, and everything works fine again.
My host doesn't know what has caused the issue, but has dug up this microsoft link: http://support.microsoft.com/kb/907264
Most of that tech speak is beyond me! I use Dreamweaver - does anybody know if the standard dreamweaver connections or cursors contravene the advice on that page, and if so how to fix it?
If not, does anybody know where to look to solve this issue?
Thanks,
Dan

I had this same problem and on a hunch I deleted the brackets
so that the connection string instead of being,
"Persist Security Info=False;Data
Source=[THESERVER\SQLEXPRESS];Initial Catalog=[AdventureWorks];User
ID=[ATEST];Password=[kjdkjdkjd]"
is now,
"Persist Security Info=False;Data
Source=THESERVER\SQLEXPRESS;Initial Catalog=AdventureWorks;User
ID=ATEST;Password=kjdkjdkjd"
This was in Dreamweaver 8.

SQL Server service not automatically starting (logon failure)

I just installed SQL Server 2012 on a machine. To run "SQL Server" as well as "SQL Server Agent" service I have created a domain account called SQLADMIN. This account is a service account and has no other rights like logon locally or
local administrator.
When the machine restarts, "SQL Server" service doesn't start automatically. When I click Start then it says "Logon Failure". Now if I simply enter the password again under tab "Log On" and then start service then it starts. Why
doesn't it start automatically?

Hello,
Please read the following article about permissions required by service accounts.
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110).aspx#Serv_Perm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
I do not see any special permission that is needed as per the article. For e.g. as per below:
SQL Server Service
Permissions granted by SQL Server Setup
SQL Server Database Engine:
(All rights are granted to the per-service SID. Default instance: NT SERVICE\MSSQLSERVER. Named instance: NT SERVICE\MSSQL$InstanceName.)
Log on as a service (SeServiceLogonRight)
Replace a process-level token(SeAssignPrimaryTokenPrivilege)
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process(SeIncreaseQuotaPrivilege)
Permission to start SQL Writer
Permission to read the Event Log service
Permission to read the Remote Procedure Call service
I am running Database Engine service as DOMAIN\SQLADMIN account which can Log On As A Service. Other 3 permissions mentioned in article are not given so let me assign it and then see how it goes.
Could this issue be due to some domain policy? Because there is another SQL Server machine which shows same behaviour.

CF8 Application Server Service Will NOT Start

I ran into this error:
java.lang.OutOfMemoryError: Java heap space
and after researching it it seemed that I should up the max heap size on the Java/JVM page, so I increased my max heap size to 1044MB from 512, via the CF Administrator, I also added maxPermSize= 256m. Then I restarted the server, but the Application Server service will not start.
I opened home/runtim/bin/jvm.config and set the heap size to 1024, restart, service still wont start.
Set the max heap size to 512 and removed maxPermSize, restarted server, service still won't start.
Set the entire java.args equal to: -server -Xmx256m -Dsun.io.useCanonCaches=false -xx:MaxPermsize=128m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
Restarted, still the services will not start.
Does anyone have any ideas?
The error I get when trying to start the services is:
Windows could not start the ColdFusion 8 Application Server on Local Computer. For more information, review the System Even Log. If this is a non-Microsoft service, contact the service vendor, and refore to service-specific error code 2.
Thanks!

Once you have ColdFusion running again this will bring you back to your initial problem:
java.lang.OutOfMemoryError: Java heap space
Suggest take a copy of your working JVM.CONFIG (so you have a backup) then add some debugging to the JVM Arguments eg:
# Arguments to VM
java.args=-server -Xmx512m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGC -verbose:gc -Xloggc:cfjvmGC.log -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
Once ColdFusion is restarted again a log file will be created called \ColdFusion8\runtime\bin\cfjvmgc.log. Open the log file and you will be able to see how the New, Tenure and Permanent memory spaces are working. Given you now know which buffer is filling (excluding New made up of Eden and a couple Survivor spaces - because those fill and empty all the time) you can make adjustments to JVM.CONFIG knowing which value you intend to alter. Likely you want to alter either Xmx or MaxPermSize. When you think the Java heap space is resolved turn logging off by removing the bolded details.
HTH, Carl.

SQL Server 2012 SP2 NTService Accounts Access Denied starting services

We have an SQL Server 2012 SP1 which was running perfectly until we applied the SQL Server 2012 SP2.
After SP2 was installed and the server rebooted all the associated SQL services that uses NTService\xxxxxxx accounts failed to start with Error 5: Access Denied.
We were able to change the services to Local System account but I just want to understand why this occurred and is this ok?
Has anyone had a similar issue or can anyone assist with an explanation?

Hi Giulio,
Based on your description, I tested the scenario as yours. After applying SQL Server 2012 SP2, I reboot the server , then restart all the associated SQL Server services that use NT SERVICE\<SERVICENAME> accounts successfully.
According to the error message, it might be caused by that NT SERVICE\<SERVICENAME> accounts don’t have sufficient permissions to access the SQL Server services installation folders. You can post detailed information in the SQL Server Errorlog file
for analysis.
In addition, Local System is a very high-privileged built-in account. It has extensive privileges on the local system and acts as the computer on the network. And it is not recommend to use local system account for running SQL Server services. For more details
about configuring SQL Server Service accounts, you can review the following links.
Configure Windows Service Accounts and Permissions:
http://msdn.microsoft.com/EN-US/library/ms143504.aspx#Windows
Best Practices For Using SQL Server Service Accounts:
http://blogs.technet.com/b/canitpro/archive/2012/02/08/the-sql-guy-post-15-best-practices-for-using-sql-server-service-accounts.aspx
Thanks,
Lydia Zhang

SQL Server Service won't start on SQL Server 2008

Hi everyone,
I'm having trouble starting SQL Server service after stopping and starting the service. Before this happened, I created a Stored Procedure for marking all tables at once along with a maintenance plan for differential backup on all my databases based on the
recommendation from this link, http://msdn.microsoft.com/en-us/library/ms253070.aspx.
When I realized that the differential backup failed with some databases displaying (Restoring...) post-fix to the database name, I decided to stop SQL Server service and start it up. That is when I won't be able to start the service again.
Is there a fix for starting the SQL Server service? Any help is very much appreciated.
Additional information:
- With administrator permission granted.
- Service Pack 1 for SQL Server 2008 installed.
- Using default database instance.
- Tried C:\Program Files\Microsoft SQL Server\MSSQL.....\Binn>net start MSSQLSERVER /T3608 ( return msg: System error 5 has occurred. Access is denied.
- When I start SQL Server service, I keep getting this dialog msg:
"Windowns could not start the SQL Server (MSSQLSERVER) on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 1814."
The event log does not explain or provide any hint on how to fix the problem.
- Log msg:
2010-07-22 10:30:25.09 Server      (c) 2005 Microsoft Corporation.
2010-07-22 10:30:25.09 Server      All rights reserved.
2010-07-22 10:30:25.09 Server      Server process ID is 6076.
2010-07-22 10:30:25.10 Server      Authentication mode is MIXED.
2010-07-22 10:30:25.10 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2010-07-22 10:30:25.11 Server      This instance of SQL Server last reported using a process ID of 5708 at 7/21/2010 3:27:01 PM (local) 7/21/2010 10:27:01 PM (UTC). This is an informational message only; no user action is required.
2010-07-22 10:30:25.11 Server      Registry startup parameters:
    -d C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
    -e C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG
    -l C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2010-07-22 10:30:25.14 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2010-07-22 10:30:25.14 Server      Detected 4 CPUs. This is an informational message; no user action is required.
2010-07-22 10:30:25.23 Server      Using locked pages for buffer pool.
2010-07-22 10:30:25.43 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2010-07-22 10:30:25.73 Server      Node configuration: node 0: CPU mask: 0x000000000000000f Active CPU mask: 0x000000000000000f. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2010-07-22 10:30:25.81 spid7s      Starting up database 'master'.
2010-07-22 10:30:26.14 spid7s      CHECKDB for database 'master' finished without errors on 2010-07-19 21:15:02.823 (local time). This is an informational message only; no user action is required.
2010-07-22 10:30:26.18 spid7s      Resource governor reconfiguration succeeded.
2010-07-22 10:30:26.18 spid7s      SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.18 spid7s      SQL Server Audit has started the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.19 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2010-07-22 10:30:26.28 spid7s      SQL Trace ID 1 was started by login "sa".
2010-07-22 10:30:26.29 spid7s      Starting up database 'mssqlsystemresource'.
2010-07-22 10:30:26.31 spid7s      The resource database build version is 10.00.2531. This is an informational message only. No user action is required.
2010-07-22 10:30:26.43 spid10s     Starting up database 'model'.
2010-07-22 10:30:26.43 spid7s      Server name is 'XXXXXXXXXXXXXX'. This is an informational message only. No user action is required.
2010-07-22 10:30:26.47 spid10s     The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2010-07-22 10:30:26.47 spid10s     Error: 927, Severity: 14, State: 2.
2010-07-22 10:30:26.47 spid10s     Database 'model' cannot be opened. It is in the middle of a restore.
2010-07-22 10:30:26.59 spid10s     Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2010-07-22 10:30:26.59 spid10s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Hello,
Could you please copy the model.mdf and modellog.ldf from
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn\Templates
To
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA
Rebuilding the system databases you will lose lose logins, jobs, SSIS packages. You may have to restore or attach user databases.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SQL Server Service can't start.

I was try start SQL Server Service in SQL Server Configuration Manager and it prompt out error 'The request failed or the service did not respond in a timely fashion.Consult the event log or other applicable error logs for details.'
I was try set HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control ServicePipeTimeout
value to decimal 180000.
I try also change the service account to local system but it prompt WMI error.
But still failed to start the service.
Could anyone help me? Thanks in advance.

I check from event viewer it showing 30++ error
I post some error here:
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Microsoft\Windows\Temporary
Internet Files\Sqm\iesqmdata0.sqm to location \\?\C:\Users\MSSQL$SQLEXPRESS.NT Service\AppData\Local\Microsoft\Windows\Temporary Internet Files\Sqm\iesqmdata0.sqm. This error may be caused by network problems or insufficient security rights.
Windows cannot find the local profile and is logging
you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Microsoft\Windows\Temporary
Internet Files\Sqm\iesqmdata0.sqm to location \\?\C:\Users\TEMP.NT Service.001\AppData\Local\Microsoft\Windows\Temporary Internet Files\Sqm\iesqmdata0.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Windows cannot log you on because your profile cannot
be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory
request was completed.
**I
was using administrator account.

Error in EPMA Server service and not starting.

Hello Gurus,
We are using Hyperion 11.1.2.1 and DB is SQL 2008;
Till yesterday all the services are running fine but suddenly we are facing below error; other services are starting but EPMA service is not starting and throwing error.
Service cannot be started. Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Cannot initialize the Session Manager. --->
Hyperion.CommonServices.Exceptions.DataAccessLayerException: To run the Dimension Server, both ALLOW_SNAPSHOT_ISOLATION and READ_COMMITTED_SNAPSHOT database settings must be set to 'ON'. Their values are currently 'OFF' and 'OFF' respectively.
Please consult the product documentation for details.
at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion, Boolean onlyLoadKnownTables)
at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion)
at
Thanks,
VA

Hello Mady,
We are using EPMA applications and Classic applications; unfortunately we haven't taken any backup's of these applications.
I heard from some one that by performing EPMA re-configuration there is a chance of loosing the applications. Only Classic applications can be restored.
Please let me know if my understanding is wrong and kindly suggest the next steps to restore the applications.
Currently we are able to login only to Shared Services only; we can login to Workspace/planning but unable to access the applications.
Thanks for your help in advance!
Thanks,
VA

2008 R2 printer server, cannot connect to printer, access denied, Windows 7 OS only

Deployed new Windows 2008 R2 domain controller, added print and document controll. Added several network printers on R2 server. We currently have mostly Vista biz clients but half a dozen W7Pro clients also. The Vista clients connect to these new network
printers, no problem but none of the W7 clients will connect. I select the printer from the drop down directory list and select to load the drivers, the system starts loading drivers and then right before it finishes it stops with error message, "Windows cannot
connect to the printer. Access denied. Again, this happens only with the W7 clients on our domain, Vista works fine.

By default, the security settings for Windows 7 and Server 2008 R2 allow users who are not members of the local
Administrators group to install only trustworthy printer drivers, such as those provided with Windows or in digitally signed printer-driver packages. You may want to install printer-driver packages on the print server
or in the clients. More details can be found this page: Cannot
connect to printer, Access denied -
http://www.chicagotech.net/server/print3.htm
Bob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

Server Service refused to start: Access denied

Similar Messages

Maybe you are looking for