Server stalls after some redeployments

Hi,
I noticed that my development server (WL60sp2 on NT2k) stalls after some
redeployments of my web application. Neither the console nor the web
application work anymore, weblogic.Admin pings do not work too. Is there
anything unusual about the thread dump??
Thanks in advance!
Daniel
[java] "SSLListenThread" prio=5 tid=0xe5fec58 nid=0x500 runnable
[0xf2cf000..0xf2cfdbc]
[java] at java.net.PlainSocketImpl.socketAccept(Native Method)
[java] at
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
[java] at
java.net.ServerSocket.implAccept(ServerSocket.java:243)
[java] at java.net.ServerSocket.accept(ServerSocket.java:222)
[java] at
weblogic.security.SSL.SSLServerSocket.acceptNoHandshake(SSLServerSocket.
java:126)
[java] at
weblogic.security.SSL.SSLServerSocket.accept(SSLServerSocket.java:117)
[java] at
weblogic.t3.srvr.ListenThread.run(ListenThread.java:247)
[java]
[java] "ListenThread" prio=5 tid=0xe4f3ab0 nid=0x74 runnable
[0xf28f000..0xf28fdbc]
[java] at java.net.PlainSocketImpl.socketAccept(Native Method)
[java] at
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
[java] at
java.net.ServerSocket.implAccept(ServerSocket.java:243)
[java] at java.net.ServerSocket.accept(ServerSocket.java:222)
[java] at
weblogic.t3.srvr.ListenThread.run(ListenThread.java:247)
[java]
[java] "Application Manager Thread" prio=5 tid=0xe550830 nid=0x7ec
waiting on monitor [0xf24f000..0xf24fdbc]
[java] at java.lang.Thread.sleep(Native Method)
[java] at
weblogic.management.mbeans.custom.ApplicationManager$ApplicationPoller.r
un(ApplicationManager.java:644)
[java]
[java] "ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'"
daemon prio=5 tid=0xe43be00 nid=0x66c waiting on monitor [0xf20f000..0
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'"
daemon prio=5 tid=0xe454ba8 nid=0x7b4 waiting on monitor [0xf1cf000..0
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "TimeEventGenerator" daemon prio=5 tid=0xe043698 nid=0x7e0
waiting on monitor [0xecdf000..0xecdfdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
[java] at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
[java] at java.lang.Thread.run(Thread.java:484)
[java]
[java] "TimeEventGenerator" daemon prio=5 tid=0xe043eb0 nid=0x4c4
waiting on monitor [0xec9f000..0xec9fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
[java] at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
[java] at java.lang.Thread.run(Thread.java:484)
[java]
[java] "SpinnerRandomSource" daemon prio=5 tid=0xe041ee0 nid=0x678
waiting on monitor [0xec5f000..0xec5fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.security.SpinnerThread.stopSpinning(SpinnerRandomBitsSource.jav
a:92)
[java] at
weblogic.security.SpinnerThread.run(SpinnerRandomBitsSource.java:109)
[java]
[java] "ExecuteThread: '14' for queue: 'default'" daemon prio=5
tid=0x813e00 nid=0x694 waiting on monitor [0xec1f000..0xec1fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '13' for queue: 'default'" daemon prio=5
tid=0x80b228 nid=0x728 runnable [0xebdf000..0xebdfdbc]
[java] at weblogic.socket.NTSocketMuxer.getNextSocket(Native
Method)
[java] at
weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:501)
[java] at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
[java] at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
[java]
[java] "ExecuteThread: '12' for queue: 'default'" daemon prio=5
tid=0x80aad8 nid=0x81c runnable [0xeb9f000..0xeb9fdbc]
[java] at weblogic.socket.NTSocketMuxer.getNextSocket(Native
Method)
[java] at
weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:501)
[java] at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
[java] at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
[java]
[java] "ExecuteThread: '11' for queue: 'default'" daemon prio=5
tid=0x809f88 nid=0x684 waiting on monitor [0xeb5f000..0xeb5fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '10' for queue: 'default'" daemon prio=5
tid=0x809438 nid=0x69c waiting on monitor [0xeb1f000..0xeb1fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '9' for queue: 'default'" daemon prio=5
tid=0x808948 nid=0x5b0 waiting on monitor [0xeadf000..0xeadfdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '8' for queue: 'default'" daemon prio=5
tid=0x80ddc8 nid=0x5d0 waiting on monitor [0xea9f000..0xea9fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '7' for queue: 'default'" daemon prio=5
tid=0x80d2d8 nid=0x720 waiting on monitor [0xea5f000..0xea5fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '6' for queue: 'default'" daemon prio=5
tid=0xe042dd0 nid=0x27c waiting on monitor [0xea1f000..0xea1fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '5' for queue: 'default'" daemon prio=5
tid=0x807e58 nid=0x65c waiting on monitor [0xe9df000..0xe9dfdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '4' for queue: 'default'" daemon prio=5
tid=0x807bf0 nid=0x6c8 waiting on monitor [0xe99f000..0xe99fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '3' for queue: 'default'" daemon prio=5
tid=0xe418dc0 nid=0x7b8 waiting on monitor [0xe95f000..0xe95fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '2' for queue: 'default'" daemon prio=5
tid=0x80bcd8 nid=0x55c waiting on monitor [0xe91f000..0xe91fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '1' for queue: 'default'" daemon prio=5
tid=0x80bbb0 nid=0x6e0 waiting on monitor [0xe8df000..0xe8dfdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '0' for queue: 'default'" daemon prio=5
tid=0x80b688 nid=0x594 waiting on monitor [0xe89f000..0xe89fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "Thread-0" daemon prio=10 tid=0xe3e2ec0 nid=0x718 waiting on
monitor [0xe85f000..0xe85fdbc]
[java] at java.lang.Thread.sleep(Native Method)
[java] at
weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
nagerImpl.java:756)
[java] at java.lang.Thread.run(Thread.java:484)
[java]
[java] "Signal Dispatcher" daemon prio=10 tid=0x23f9e8 nid=0x1c8
waiting on monitor [0..0]
[java]
[java] "Finalizer" daemon prio=9 tid=0x23bc18 nid=0x654 waiting on
monitor [0xe2bf000..0xe2bfdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
[java] at
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
[java] at
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
[java]
[java] "Reference Handler" daemon prio=10 tid=0xe0006f0 nid=0x824
waiting on monitor [0xe27f000..0xe27fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
[java]
[java] "main" prio=5 tid=0x235d48 nid=0x514 waiting on monitor
[0x6f000..0x6fc34]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:501)
[java] at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
[java] at weblogic.Server.main(Server.java:35)
[java]
[java] "VM Thread" prio=5 tid=0x81a698 nid=0x798 runnable
[java]
[java] "VM Periodic Task Thread" prio=10 tid=0x23e748 nid=0x774
waiting on monitor
[java] "Suspend Checker Thread" prio=10 tid=0x23f060 nid=0x760
runnable

Raja,
the funny thing is that I did not put it below the applications
directory. Redeployment works fine most of the time, just had this
stalls sometimes. I'll probably pass this to support.
Thanks,
Daniel
-----Ursprüngliche Nachricht-----
Von: Raja Mukherjee [mailto:[email protected]]
Bereitgestellt: Mittwoch, 11. Juli 2001 22:13
Bereitgestellt in: performance
Unterhaltung: Server stalls after some redeployments
Betreff: Re: Server stalls after some redeployments
Daniel,
It seems to be a bug with WL 6.0. Please open a case with support.
Something I did notice...the undeploy / deploy feature of the
Admin Console
works well when the JAR/WAR/EAR is NOT in the application directory.
For example, let's say that your application directory is if
D:\bea\wlserver6.0\config\mydomain\applications and you put
an application
(JAR/WAR/EAR) in it funny things do happen when you use the
console to try
to deploy and undeploy it.
However if you have the application in another directory
(let's say d:\temp)
and then use the console, everything works fine.
Hope this helps...
.raja
"Daniel Hoppe" <[email protected]> wrote in message
news:[email protected]...
Hi,
I noticed that my development server (WL60sp2 on NT2k) stalls after some
redeployments of my web application. Neither the console nor the web
application work anymore, weblogic.Admin pings do not work too. Is there
anything unusual about the thread dump??
Thanks in advance!
Daniel
[java] "SSLListenThread" prio=5 tid=0xe5fec58 nid=0x500 runnable
[0xf2cf000..0xf2cfdbc]
[java] at java.net.PlainSocketImpl.socketAccept(Native Method)
[java] at
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
[java] at
java.net.ServerSocket.implAccept(ServerSocket.java:243)
[java] at java.net.ServerSocket.accept(ServerSocket.java:222)
[java] at
weblogic.security.SSL.SSLServerSocket.acceptNoHandshake(SSLSer
verSocket.
java:126)
[java] at
weblogic.security.SSL.SSLServerSocket.accept(SSLServerSocket.java:117)
[java] at
weblogic.t3.srvr.ListenThread.run(ListenThread.java:247)
[java]
[java] "ListenThread" prio=5 tid=0xe4f3ab0 nid=0x74 runnable
[0xf28f000..0xf28fdbc]
[java] at java.net.PlainSocketImpl.socketAccept(Native Method)
[java] at
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
[java] at
java.net.ServerSocket.implAccept(ServerSocket.java:243)
[java] at java.net.ServerSocket.accept(ServerSocket.java:222)
[java] at
weblogic.t3.srvr.ListenThread.run(ListenThread.java:247)
[java]
[java] "Application Manager Thread" prio=5 tid=0xe550830 nid=0x7ec
waiting on monitor [0xf24f000..0xf24fdbc]
[java] at java.lang.Thread.sleep(Native Method)
[java] at
weblogic.management.mbeans.custom.ApplicationManager$Applicati
onPoller.r
un(ApplicationManager.java:644)
[java]
[java] "ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'"
daemon prio=5 tid=0xe43be00 nid=0x66c waiting on monitor [0xf20f000..0
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'"
daemon prio=5 tid=0xe454ba8 nid=0x7b4 waiting on monitor [0xf1cf000..0
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "TimeEventGenerator" daemon prio=5 tid=0xe043698 nid=0x7e0
waiting on monitor [0xecdf000..0xecdfdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
[java] at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEvent
Generator.
java:138)
[java] at java.lang.Thread.run(Thread.java:484)
[java]
[java] "TimeEventGenerator" daemon prio=5 tid=0xe043eb0 nid=0x4c4
waiting on monitor [0xec9f000..0xec9fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
[java] at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEvent
Generator.
java:138)
[java] at java.lang.Thread.run(Thread.java:484)
[java]
[java] "SpinnerRandomSource" daemon prio=5 tid=0xe041ee0 nid=0x678
waiting on monitor [0xec5f000..0xec5fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.security.SpinnerThread.stopSpinning(SpinnerRandomBits
Source.jav
a:92)
[java] at
weblogic.security.SpinnerThread.run(SpinnerRandomBitsSource.java:109)
[java]
[java] "ExecuteThread: '14' for queue: 'default'" daemon prio=5
tid=0x813e00 nid=0x694 waiting on monitor [0xec1f000..0xec1fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '13' for queue: 'default'" daemon prio=5
tid=0x80b228 nid=0x728 runnable [0xebdf000..0xebdfdbc]
[java] at weblogic.socket.NTSocketMuxer.getNextSocket(Native
Method)
[java] at
weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:501)
[java] at
weblogic.socket.SocketReaderRequest.execute(SocketReaderReques
t.java:23)
[java] at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
[java]
[java] "ExecuteThread: '12' for queue: 'default'" daemon prio=5
tid=0x80aad8 nid=0x81c runnable [0xeb9f000..0xeb9fdbc]
[java] at weblogic.socket.NTSocketMuxer.getNextSocket(Native
Method)
[java] at
weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:501)
[java] at
weblogic.socket.SocketReaderRequest.execute(SocketReaderReques
t.java:23)
[java] at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
[java]
[java] "ExecuteThread: '11' for queue: 'default'" daemon prio=5
tid=0x809f88 nid=0x684 waiting on monitor [0xeb5f000..0xeb5fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '10' for queue: 'default'" daemon prio=5
tid=0x809438 nid=0x69c waiting on monitor [0xeb1f000..0xeb1fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '9' for queue: 'default'" daemon prio=5
tid=0x808948 nid=0x5b0 waiting on monitor [0xeadf000..0xeadfdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '8' for queue: 'default'" daemon prio=5
tid=0x80ddc8 nid=0x5d0 waiting on monitor [0xea9f000..0xea9fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '7' for queue: 'default'" daemon prio=5
tid=0x80d2d8 nid=0x720 waiting on monitor [0xea5f000..0xea5fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '6' for queue: 'default'" daemon prio=5
tid=0xe042dd0 nid=0x27c waiting on monitor [0xea1f000..0xea1fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '5' for queue: 'default'" daemon prio=5
tid=0x807e58 nid=0x65c waiting on monitor [0xe9df000..0xe9dfdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '4' for queue: 'default'" daemon prio=5
tid=0x807bf0 nid=0x6c8 waiting on monitor [0xe99f000..0xe99fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '3' for queue: 'default'" daemon prio=5
tid=0xe418dc0 nid=0x7b8 waiting on monitor [0xe95f000..0xe95fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '2' for queue: 'default'" daemon prio=5
tid=0x80bcd8 nid=0x55c waiting on monitor [0xe91f000..0xe91fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '1' for queue: 'default'" daemon prio=5
tid=0x80bbb0 nid=0x6e0 waiting on monitor [0xe8df000..0xe8dfdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "ExecuteThread: '0' for queue: 'default'" daemon prio=5
tid=0x80b688 nid=0x594 waiting on monitor [0xe89f000..0xe89fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
[java] at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
[java]
[java] "Thread-0" daemon prio=10 tid=0xe3e2ec0 nid=0x718 waiting on
monitor [0xe85f000..0xe85fdbc]
[java] at java.lang.Thread.sleep(Native Method)
[java] at
weblogic.transaction.internal.TransactionManagerImpl$1.run(Tra
nsactionMa
nagerImpl.java:756)
[java] at java.lang.Thread.run(Thread.java:484)
[java]
[java] "Signal Dispatcher" daemon prio=10 tid=0x23f9e8 nid=0x1c8
waiting on monitor [0..0]
[java]
[java] "Finalizer" daemon prio=9 tid=0x23bc18 nid=0x654 waiting on
monitor [0xe2bf000..0xe2bfdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
[java] at
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
[java] at
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
[java]
[java] "Reference Handler" daemon prio=10 tid=0xe0006f0 nid=0x824
waiting on monitor [0xe27f000..0xe27fdbc]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
[java]
[java] "main" prio=5 tid=0x235d48 nid=0x514 waiting on monitor
[0x6f000..0x6fc34]
[java] at java.lang.Object.wait(Native Method)
[java] at java.lang.Object.wait(Object.java:420)
[java] at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:501)
[java] at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
[java] at weblogic.Server.main(Server.java:35)
[java]
[java] "VM Thread" prio=5 tid=0x81a698 nid=0x798 runnable
[java]
[java] "VM Periodic Task Thread" prio=10 tid=0x23e748 nid=0x774
waiting on monitor
[java] "Suspend Checker Thread" prio=10 tid=0x23f060 nid=0x760
runnable

Similar Messages

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?

Sun One Web Server connection pool goes stale after some time

Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance.

Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance.

New iPod Touch 32gb stalls after starting sync, error 54, manual synce gets dumped

I just got this thing at Walmart last Sunday and its been driving me nuts all week! It's the brand new iPod Touch 32gb 4gen. When trying to sync it will start to load music then stall. Sometimes it gives error code 54, sometimes says it cant convert song, cant find song, or just stalls. If I wait anywhere from 15 minutes to an hour it will finally un-freeze and dump everything or say the connection has timed out. I've ran repair on iTunes from control panel, no help. Un-installed iTunes and re-installed it then tried synce, no help. I un-selected everything in the iPod summary so that it wont try to synce when I connect it and selected manual synce. Then I could sync a few songs at a time, but it still stalls after only loading a few songs on iPod. Tried dumping everything out of the ipod and start over, several times, no help. I've been 6 days, all day, every day, and half the nights getting a few songs at a time on this dam thing. I found when it stalls if I turn the iPod off to force it out of iTunes I can then restart iTunes, reconnect the iPod, manually select 15 to 20 songs and drag them to the iPod. A few times I got over a hundred to sync but usually 20 to 30 songs then it stalls. Then I have to do the whole thing over again. I had a little over 1200 songs out of the 1877 songs, 11.28gb, in my music library when the last time it stalled, it dumped everything. 4 or 5 days of manually syncing a few songs at a time, GONE. Just poof, all that work for nothing. The only thing left on it is 92 of the hundred something songs I've bought from iTunes. I'm ready to take a hammer to the dam thing and send it back to Walmart where I got it.
I'm using a Dell Studio 17 inch laptop that's about 4 yrs old running Windows 7 that I installed 2 years ago. I had a iPod nano 2gb that worked fine with this computer & iTunes untill it died last spring.
Why do you have it set up so that one little hickup and the dam thing dumps everything thats on it? I cant even stop it from starting to sync when I connect it because I need to see the settings in the summary for the iPod to change the settings, but I cant see that until I connect it, but as soon as I connect it, it try's to start the sync and stalls feezing everything.
Can anybody help me before this thing drives me completely over the edge!?
The ColoradoHermit

I have a older Dell Optiplex desktop computer running Windows XP. I copied the iTunes folder on my laptop to an external drive and plugged that into my desktop computer. Then connected the iPod Touch to the desktop. For some reason or other the computer thought the iPod was a camera and wanted to know which photo program to open with or for it. I never did get iTunes on my desktop computer to "see" the iPod and had to give up that idea.
When going into the My Computer or Windows Explorer - which is the one I like to use for working with my files- when I connect the iPod to my computer in Windows Explorer it will show the iPod. Open that and it shows Internal Storage, open that and a folder with DCIM shows below it, open that and a folder with 860OKMZO on it shows below that, open that and it has the 40 or 50 photos I saved from Facebook. That's it, there isn't anything else shown in its storage. The iTunes on my old Desktop doesn't see the iPod Touch either.
Even if the iTunes on my old desktop would work with this iPod Touch it wouldn't do me any good. I read in a post that once it is connected to a iTunes Library, if its connected to any other iTunes Library on a different computer it will dump everything that's on it. Which is totally stupid but I think they - iTunes - have it that way so that you cant share your music with somebody elses computer. But that also makes it so I cant manually sync one thing at a time with my own iTunes Library. I tried syncing my music first and after I got some of it on the iPod, in its summary I deselected the music sync and selected the movies or video's so I could manually synce a few to it to see if it would work. Bad move. As soon as I did that it dumped everything that was on it, then said that it could not sync the movies because the files could not be written. HUH? Why a video from YouTube could not be written beats me. But why did it dump all the music?
The last thing I did with it was put all the options in the summary in iTunes back to default, removed everything on the iPod that was left after its last dump, then disconnected it, closed iTunes, and rebooted my laptop and started over from scratch. Started iTunes, connected the iPod, after iTunes found it I opened the iPod summary, made sure everything except sync photo's was selected, then started the sync function. It immediately listed all the songs and the songs info in light gray under music on the iPod. It only got 2 songs copied, then stalled. I just left it alone to see what it would do. I opened the Windows Task Manager to see what it was doing. Even though the iTunes program appered to be stalled it was using 50% of the CPU. After about 15 minutes it showed a popup window saying the song could not be writen then another saying its connection to the iPod had timed out, then iTunes stalled and "not responding" showed in task manager and at the top of the iTunes window. After 30 minutes I had to force it to close with the Task Manager. By then it was after midnight and had been another 12 hours wasted messing with this thing.

How the files are decreasing from RBS storage after some time i delete docs from document library, where shld I check the settings for this?

HI
I created a web application and configured rbs storage ,
I uploaded documents (for ex: 18 number)
after uploaded documents , and observed the RBS storage folder, number of files are increasing (39 number) , its working fine
and also I run the querys to check the rows increasing or not , (when I upload new doc rows are increased its fine also)
select count(*) from alldocs
Select count(*) from AllDocstreams
but when I delete some docs from document library ,
1)the doc itself deleted from document library
2)when I check the rbs storage there is no number of files are decreased(its still 39 files ), its same as before doc deleted from doc library
after some time I found the number of files are decreasing from RBS storage folder in sql server,
here I want to know the how the files are decreasing from RBS storage after some time, where shld I check the settings for this? and how I control on it
here how I know the settings for cleaning up orphan BLBOS how these deleted BLOB
adil

1. WHen you delete the file from Sharepoint, it is still present in Recycle bin. This is a default setting in sharepoint for 30 days. Once files are deleted fro Recycle bin, it can also be delete from RBS
2. There is a RBS cleanup job which deletes files from RBS. for more info check
http://mehuljamod.blogspot.in/2012/09/remote-blob-storage-maintainer-rbs.html

IE is not showing on windows server 2008 after updates

Hi,
I have installed Window server 2008 R2.
After installing i found IE 8 on the server, but after 1day it automatically updated some softwares and now IE is not showing on my system.
i.e IE uninstalled after the updates to the windows server.
Please can some one help me to get the IE. I tried installing IE8, IE9 after downloading but it is showing "Internet Explorer 8 is not supported on this operating system"
Regards
Krishna

Hi,
Internet Explorer 8 runs on any of the following operating systems:
Windows Vista, 32-bit versions
Windows Vista, 64-bit versions
Windows Vista with Service Pack 1 (SP 1) or a later version
Windows XP, 32-bit versions with Service Pack 2 (SP2) or a later version
Windows XP Professional, 64-bit Edition
Windows Server 2003, 32-bit versions with Service Pack 2 (SP2) or a later version
Windows Server 2003, 64-bit versions with Service Pack 2 (SP2) or a later version
Windows Server 2008, 32-bit, or a later version
Windows Server 2008, 64-bit, or a later version
Please expand the below path to check whether IE is there:
C:\Program Files\Internet Explorer
Regards,
Yan Li
Regards, Yan Li

RMI UnmarshalException Occurs after some time

Hi,
I have a client server application that talks via rmi. My client saves data to a server or gets data by passing in parameters that include string, boolean and a Hashtable. The data is saved and retrieved many times. However, after some time, the RMI can't even find the method. That is, the client calls a method and I get a unmarshalling exception from the client, basically stating that it can't find the method.
Here is the method in my interface, the method in question is the override method, the getLast works fine all the time:
public interface Admin extends Remote
     Hashtable getLast(Hashtable setLashtHash) throws RemoteException;
//override method can query or set a new data in the form of a hashtable. It return a Hashtable or null
     Object override(boolean setNew, String ticker, boolean getOverrideHash,boolean getLast, boolean getPrevious,Hashtable newOverride) throws RemoteException;
Here's the implementation of override:
     synchronized public Object override(boolean setNew, String ticker, boolean getOverrideHash,boolean getLast, boolean getPrevious,Hashtable newOverride) throws RemoteException
          try{
          if(setNew)
               if(newOverride!=null)
               System.out.println("Saving override hash, entries=" + newOverride.size());
               overrideHash=newOverride;
          else if(getOverrideHash)
               if(overrideHash!=null)
               System.out.println("Getting override hash entries=" + overrideHash.size());
               return overrideHash;
          else
               if(getLast)
                    if(overrideHash==null)
                         System.out.println("override hash is null");
                         return null;
                    OverrideStruct os=(OverrideStruct)overrideHash.get(ticker);
                    if(os.last!=null)
                         System.out.println("Last price for ticker " + ticker + " is=" +os.last);
                         Float last=os.last;
                         return last;
                    return null;
               else if(getPrevious)
                    if(overrideHash==null)
                         return null;
                    OverrideStruct os=(OverrideStruct)overrideHash.get(ticker);
                    if(os.previous!=null)
                         Float previous=os.previous;
                         return previous;
                    return null;
     }catch(Exception e)
          System.out.println("Unknown Exception caught in override function");
          e.printStackTrace();
          return null;
Here is the exception, please help.
java.rmi.ServerException: RemoteException occurred in server thread; nested exce
ption is:
java.rmi.UnmarshalException: invalid method hash
java.rmi.UnmarshalException: invalid method hash
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknow
n Source)
at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
at sun.rmi.server.UnicastRef.invoke(Unknown Source)
at AdminImpl_Stub.override(Unknown Source)
at StocksTable$12.run(stockstable.java:481)
Please help,
Thanks Steve

By the way, this is how my server calls the client:
Hashtable otable=(Hashtable)a1.override(false,new String(""),true,false,false,new Hashtable());

RMI: UnmarshalException, can't find method after some time.

Hi,
I have a client server application that talks via rmi. My client saves data to a server or gets data by passing in parameters that include string, boolean and a Hashtable. The data is saved and retrieved many times. However, after some time, the RMI can't even find the method. That is, the client calls a method and I get a unmarshalling exception from the client, basically stating that it can't find the method.
Here is the method in my interface, the method in question is the override method, the getLast works fine all the time:
public interface Admin extends Remote
Hashtable getLast(Hashtable setLashtHash) throws RemoteException;
//override method can query or set a new data in the form of a hashtable. It return a Hashtable or null
Object override(boolean setNew, String ticker, boolean getOverrideHash,boolean getLast, boolean getPrevious,Hashtable newOverride) throws RemoteException;
Here's the implementation of override:
synchronized public Object override(boolean setNew, String ticker, boolean getOverrideHash,boolean getLast, boolean getPrevious,Hashtable newOverride) throws RemoteException
try{
if(setNew)
if(newOverride!=null)
System.out.println("Saving override hash, entries=" + newOverride.size());
overrideHash=newOverride;
else if(getOverrideHash)
if(overrideHash!=null)
System.out.println("Getting override hash entries=" + overrideHash.size());
return overrideHash;
else
if(getLast)
if(overrideHash==null)
System.out.println("override hash is null");
return null;
OverrideStruct os=(OverrideStruct)overrideHash.get(ticker);
if(os.last!=null)
System.out.println("Last price for ticker " + ticker + " is=" +os.last);
Float last=os.last;
return last;
return null;
else if(getPrevious)
if(overrideHash==null)
return null;
OverrideStruct os=(OverrideStruct)overrideHash.get(ticker);
if(os.previous!=null)
Float previous=os.previous;
return previous;
return null;
}catch(Exception e)
System.out.println("Unknown Exception caught in override function");
e.printStackTrace();
return null;
Here is the exception, please help. Does anyone know why the exception is "invalid method hash"? I don't understand why it's saying that, I am calling method override(....).
java.rmi.ServerException: RemoteException occurred in server thread; nested exce
ption is:
java.rmi.UnmarshalException: invalid method hash
java.rmi.UnmarshalException: invalid method hash
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknow
n Source)
at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
at sun.rmi.server.UnicastRef.invoke(Unknown Source)
at AdminImpl_Stub.override(Unknown Source)
at StocksTable$12.run(stockstable.java:481)
Please help,
Thanks Steve

By the way, this is how my server calls the client:
Hashtable otable=(Hashtable)a1.override(false,new String(""),true,false,false,new Hashtable());

File is visible in content server even after deletion

Hi
After a file has been deleted, it is still showing on the Search Results page. Although when I click on the Info button or the file Id, it shows the following error
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
How to ensure that the deleted file is also removed from the search results page?
Regards
Pradeep

When I do a collection rebuild, the following error occurs:
Indexing aborted at 8/4/13 10:50am. Aborting index build. Too many errors with finding and copying files to the appropriate place.
Due to failure of indexing, files are visible even after archiving. Please help.

Reset after some predefined time of no activity.

Hi, we are setting up Firefox as a Kiosk application.
CU is asking the session would be reset (=firefox restart) after a predefined time of no activity by the user, so whatever page the browser is left, after some amount of inactivity it returns to its home page.
One way to do that could be to add some extensions to Firefox (https://addons.mozilla.org/it/firefox/addon/616), but I am guessing if there is any timeout value I can set on Sun Ray Server and which is the recommended way to do that.
MTIA

Thanks for your answers.
I've been tracing the execution and I've found out that I don't get that exception (sorry, when I said I got it, it was due to a different matter). In fact I don't get any exception at all, but it doesn't work out.
I've been checking my code and don't close the socket myself at any point and the other end doesn't close it, either. I have no clue about what the reason of the problem is: it just stop answering.
I'm working on sending PING messages to the client so it isn't inactive so long. Perhaps this will solve the problem, but I still wonder what the cause is.
Can you give any advice?

Re: (forte-users) Unstable server ENV after upgrade to Forte30M2.

I see/suggest a few things:
1) In your #1, you mention ".... development and test environments which use the
same Forte 3M installs through links ...". This concerns me. On our UNIX box
each environment has it's own directory containing it's own install. If your
environments are some how sharing a node manager, log directory or processes (to
name a few things) that is a recipe for disaster. They may be competing for
resources and usually the first one started will win.
2) I haven't done a lot with compatibility levels, but if an application built
in dev is to run in test it may be important that node managers and services
(autocompile, codegen etc.) be at the same level (????).
3) Check the definition files, to make sure the two environments operate
independently. If they are both trying to write to the same log file the one
started up first will work while the second will not as the file will be "busy".
4) We usually use rpcreate (newer version) to create brand new repositories.
Than we export/import the source code that we need. Also it is important to
force compile ALL plans in a workspace at least once after doing the import.
This will ensure that all of the code is "speaking the same language". The other
compile, only compiles those pieces of code that changed from the last compile.
Hope this helps.
Kelsey PetrychynSaskTel Technical Analyst
ITM - Technology Solutions - Distributed Computing
Tel (306) 777 - 4906, Fax (306) 359 - 0857
Internet:kelsey.petrychynSasktel.sk.ca
Quality is not job 1. It is the only job!
"Braja Chattaraj" <forte_brajachotmail.com> on 09/13/2000 03:43:57 PM
Please respond to chattaraj_braja_NONLILLYlilly.com
To: forte-userslists.xpedior.com
cc: (bcc: Kelsey Petrychyn/SaskTel/CA)
Subject: (forte-users) Unstable server ENV after upgrade to Forte 30M2.
We are running Forte 3M2 clients and server in our test environment with
clients on NT and server on Solaris 2.6. Eversince the upgrade from 3L to 3M
we have been having an unstable environment that does not remain alive for >
10 mins. These are the details of the Forte installs and server setups :
1. The server hosts the development and test environments which use the same
Forte 3M installs through links (same ftcmd, ftexec, nodemgr, etc.). The
environments are at compatibility levels 0 and 1 respectively.
2. The two environments have the same definition files (defining the ENV
variables), though seperate copies and the two environments are hosted on
different ports on the same server.
3. While building the new 3M environmnets in DEV and TST, we exported the
old 3L repositories and imported them into the new 3M repositories and
deployed the applications.
While the DEV environment is stable the TST environment is not. This has
been observed while moving plans between the environments (export and
import) using fscript commands, deploying the apps after the move using
fscript, and testing the apps. Sometimes it has come down right after a
startup. There is no programatic reference to the environment agent in the
code. So, a programatic shutdown is ruled out.
Does anybody have a clue or a similar experience ?
Thanks.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BRAJA KISHORE CHATTARAJ
Consultant, Analysts International.
Work : Sphinx Pharmaceuticals (A division of Eli Lilly & Co.)
(919) 314-4134
Home : 1801, Williamsburg Rd., #41H, Durham, NC 27707.
(919) 463-7802
E-mail : forte_brajachotmail.com
Visit us www.analysts.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://profiles.msn.com.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

We found a solution to our issue.Their desktops were in a lockdown environment and the essbase.id file located in the windows directory was locked as well. This file is responsible for assigning ports etc and it couldn't be updated for the 6.5.4p2 upgrade. Once the file was deleted and the user reconnected to Essbase, the essbase.id was reset and they could connect.

Cannot start the SQL server service after you install Active Directory

Good Morning,
Im the system admin for a small company. We have a dedicated domain controller but it is the only one. To get a second domain controller up and running on our domain, I installed the AD role on our file and SQL server. After the reboot
we couldnt get SQL up and running. I found this article
http://support.microsoft.com/kb/929665
In the article it reads
To work around this issue, repair Windows Internal Database. To do this, run the following command line at a command prompt:
Msiexec /i SSEE_10.msi CALLERID=OCSetup.exe REINSTALL=ALL REINSTALLMODE=omus /qn REBOOT=ReallySupress /l*v <var><Log_File_Path></var>
My question is what is the Log_File_Path? Is that where I installed the AD log path?
My DBA is also looking into this as well.
Thanks in advance,
Brian
Brian Fink, MCSE

Hi Brain,
what's version of SQL Server that you have installed and what's your operationg system version info?
If you are running SQL Server 2008, which is not supported on the Windows Server 2008/2008 R2 domain controll (DC), even on Windows Server 2003 DC, there are limitations. Microsoft does not recommend to install SQL Server instances and DC on the same server,
for more information, see Install SQL Server on a Domain Controller (http://msdn.microsoft.com/en-us/library/ms143506.aspx#DC_Support).
There are some threads in the forum talked about installing SQL Server and DC on the same server, here are some for your references:
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/1a2963ff-90d7-4bba-97ce-fa15f70fb6a8/
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/981ef726-d04a-4063-8008-cc7bbad854ab/
Hope this helps. Please feel free to let me know if you have more questions.
Best Regards,
Chunsong Feng [MSFT]
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Precalculation Server error after 10 broadcasted workbooks

Hi gurus,
i have a question concerning broadcasting workbooks. We are using the newest precalculation server with patch 13. The first 10 workbooks are calculated and sent via email. The rest of workbooks calculated are sent as a job but the RSRD_Log transaction shows an error. It begins with "Unresolved exception occured in the precalculation server" then next message "System.Runtime.InteropServices.comException. The RPC server is unavailable (Exception from HRESULT:xxxxxx) "
Then some other messages are displayed. Then at the end it says cannot precalculate Workbook. In rsprecadmin the server is green and ready.
Is there any restrictionin sending via Email?
How can i get the server again to continue sending?
How can i clear the queue, to get the precalculation server ready to continue scheduled workbooks?
Thanks and kind regadrs,
Murat

Hi Edward,
we are testing the broadcast functionality and we want to go live first week in september. I hope you remember and suggested me the note which came out in CW33 with the precalculation server patch 13 . we are using it but still NVs but there is also the issue with the sizing. Last night we scheduled 16 times the same workbook.All 5 minutes one workbook should be sent out. 2 Precalculation server were set up to deal with them. In the SAP document "How to ...Troubleshoot Information Broadcasting (BEx Workbooks)" in chapter 2 it is mentioned that when ycurrently you can have 10 workbooks in the queue. Therefore we set up 2 precalculation server with 10 workbooks capacity. Then we set in the Broadcast setting the load balancing option without selecting any precalculation server. My intention would be the first 10 workbooks should be broadcasted with one of the precalculation server. After he has reached his capacity the next workbooks would be broadcasted with the second precalculation server. Am i wrong?
When i check the queue i see the 16 workbooks in "Queue Overview of Proccessed Error-Free Precalculations" but with a duration with 0 seconds. the log says in RSRD_LOG says as described before the first message is "Unresolved exception occurred on the precalculation server" then "System.Runtime.InteropServices.COMException (0x800 0706BA): The RPC server is unavailable. (Exception" and at the end "Cannot precalculate workbook ZBROADCAST_TEST". I can see that when load balancing the second server is not used.
But while seraching for precalculation server it says "Precalculation server PRECALC_2 has only 0 free instanzen => not selected" but why. it has never been used why 0 instances free?

WS not created in application server control after deployment

Hi,
I just tried to deploy fulfillmentESB project(SOADemo Projects) from Jdev to Oracle App server control. But there was no webservice created in Oracle application server control under webservices link....plz help me...
Actually the steps which i had followed to deploy that fulfillment project are:
* right-click fulfillmentESB
* select Register with ESB, Integration connection
after which the fulfillment webservice can be seen in ESB control as well as application server control. But i could not able to see webservice created in application server control.
Also i tried deploying the fulfillmentESB using EAR file - no use
So kindly give me some steps to solve this issue...
-Indhu

Here is an example of the two steps required to deploy a Web Service application, using the ant task for the 10.1.3.x release.
<project name="CalculatePrice" default="all" basedir="." xmlns:o="antlib:oracle">
<property file="build.properties"/>
<property name="deployeruri"        value="deployer:oc4j:${oc4j.host}:${oc4j.admin.port}"/>

<property name="bindweb.website" value="default-web-site"/>
<property name="app.name" value="sdots"/>
<target name="deploy">
    < o :deploy file="${basedir}/dist/${app.name}.ear"
              deploymentname="${app.name}" deployeruri="${deployeruri}"
              userid="${oc4j.admin.user}" password="${oc4j.admin.password}"/>
    < o :bindWebApp deploymentname="${app.name}" deployeruri="${deployeruri}"
                  userid="${oc4j.admin.user}" password="${oc4j.admin.password}"
                  webmodule="webservice-web" websitename="${bindweb.website}"
                  contextroot="/sdots"/>
</target>Not sure if this applies to your specific scenario.
ps. cross posting on the different OTN forums is generally not a good idea as you get threads out of sync. In this specific case, you are running into an issue with a specific ESB demo, and the ESB-SOA forum is definitly a better palce to get specific help.
WS not created in application server control after deployment
ps2. I guess you should got it by now, as I am not the first one to make this comment.
Webservice not created in oracle application server after deployment
ps3. We still don't have details about the versions you are using and the specific about THE SOADemo Projects - provide the information someone else would need in the forum that best correspond to your issue; the SOA one in this case ;-)

Server stalls after some redeployments

Similar Messages

Maybe you are looking for