Server stops after sending successive email to groups.

Server stops after sending successive email to groups. Has happened several times, I have 15 groups, after sending to 13, I cannot send anymore, even the next day. Thanks for any help.

Are you running OS X Server here? (This question was originally posted in the OS X Server forum, but you're not referencing your OS X Server version or related details. Which leads me to suspect you might not be running OS X Server here.)
If you are not running OS X Server here and are using hosted email, you can use Connection Doctor within Mail.app to take a look at the connection processing that is occuring within Mail.app, but I'd suspect you are running into a mail server problem, or a mail server sending limit; possibly a mail-flood limit of some sort.
Please contact your hosting provider for assistance with this.
If you are running OS X Server and wish to troubleshoot this...
Bad DNS is a common cause of mail server errors.
Do not use a .local domain for your mail server DNS services, and do not use your ISP DNS.
To check this, launch terminal.app from Applications > Utilities and issue the following (harmless, diagnostic, no changes performed) command and see if there are DNS or network issues:
sudo changeip -checkhostname
You'll need to provide a privileged password, and you might get a one-time message about sudo use, and you'll then get an indication that no changes are required, or that there are DNS or network errors.
To check public DNS, issue the following commands, replacing example.com with your domain, and mail.example.net with whatever is returned by the first command, and 10.20.30.40 with whatever is returned by tge second command.
dig +short @8.8.8.8 MX example.com
dig +short @8.8.8.8 mail.example.net
dig +short @8.8.8.8 -x 10.20.30.40
The host name returned by the third command should match the host name used for the second command. (The 8.8.8.8 IP address is a Google DNS server, and the @ reference to that will bypass any local DNS setup you are using.)
To check the mail server itself, launch Console.app from Applications > Utilities and see what the mail server is chatting about — if anything — when the failures occur. Expurgate any private information and post a small representative sample of just the error — please don't dump a hundred lines of log output here.

Similar Messages

Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue

Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue

Marc-
The Safari message is probably telling the truth. Is the problem repeatable at several websites, or is it only with a particular one? If all websites, you may have trouble with your internet connection downloading large amounts of data. Mail messages are relatively small unless there are attachments or embedded images.
Fred

Scheduling of Concurrent Program stops after completed successful.

Hi
I need to create a check or procedure to create a alarm, which helps in checking the scheduling of all those concurrent programs whose scheduling has been stopped after completing successful. There has been lot of occurrences in our environment that led to programs not running for next run.
Aviral

If you have a trace, then just post the tkprof output here (put the tag before and after it).
Hopefully you've traced the session with WAIT EVENTS, so we can see where much time is being spent.
If not, I suggest you first trace the session again with WAIT EVENTS.

Oracle Names server stops after a few seconds

Hi all,
Working as a Server admin and DBA installed Oracle report server. They came to me saying the Oracle Names Server stops after a few seconds.
There are 2 windows 2003 R2 32 bit servers, active passive config. The first server runs the service fine, this second server has the issue. Both servers were build the same..very strange that one would work and the other now.
Hereis the Event viewer log for the service failure.
Event Type:     Error
Event Source:     Application Error
Event Category:     (100)
Event ID:     1000
Date:          6/22/2011
Time:          11:08:14 AM
User:          N/A
Computer:     USSCNBOSCRPT02
Description:
Faulting application NAMES.EXE, version 0.0.0.0, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x00031a02.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 4e 41 4d ure NAM
0018: 45 53 2e 45 58 45 20 30 ES.EXE 0
0020: 2e 30 2e 30 2e 30 20 69 .0.0.0 i
0028: 6e 20 6d 73 76 63 72 74 n msvcrt
0030: 2e 64 6c 6c 20 37 2e 30 .dll 7.0
0038: 2e 33 37 39 30 2e 33 39 .3790.39
0040: 35 39 20 61 74 20 6f 66 59 at of
0048: 66 73 65 74 20 30 30 30 fset 000
0050: 33 31 61 30 32 31a02
Googled the erro but nothing simular came up.
Any ideas?
Thanks,
Mike

HEre are the logs from the Names.log
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:03:06
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_5224.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1575))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00265: warning: cannot load data from checkpoint file
NL-00905: error opening D:\Oracle\ora92\network\names\ckptop.ora
SNL-00016: snlfohd: error opening file
32-bit Windows Error: 2: No such file or directory
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00265: warning: cannot load data from checkpoint file
NL-00905: error opening D:\Oracle\ora92\network\names\ckpdom.ora
SNL-00016: snlfohd: error opening file
32-bit Windows Error: 2: No such file or directory
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:07:16
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_2376.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:09:24
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_3500.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:10:37
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_1888.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:27:33
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_2564.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 21-JUN-2011 11:33:35
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_1564.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 21-JUN-2011 13:38:28
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_2552.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 22-JUN-2011 11:08:13
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_4800.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"

The server rejected the sender's email address.

The message could not be sent because the server rejected the sender's email address. The sender's email address was '[email protected]'.
Subject 'Fw: trade brochure'
Server Error: 530
Server Response: 530 authentication required - Your email could not be sent. To fix this you must make a simple change to your email client (known as SMTP authentication). For advice visit http://www.bt.com/smtp
Server: 'smtp.btinternet.com'
Windows Live Mail Error ID: 0x800CCC78
Protocol: SMTP
Port: 25
Secure(SSL): No
this message keeps appearing every time i try to send an email from my account, please could you help me x

Hi,
You need to
check the box next to "My outgoing server (SMTP) requires authentication"
on the Outgoing Server tab and select the radio button for "Use same settings as my incoming mail server."
Since I don’t know which version of Outlook you are using, the third-party link below may be helpful to you:
Setting up Business Mail in Microsoft Outlook 2010 and 2013
In addition, you can ask in the forum below for further assistance:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1386067216493
Best regards,
Susie

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

How do you send an email to group address with Maverick OSX?

Installed Maverick 10.9.2 and have problem sending emails to Group address's. I can add each reciepent one ata time but can not get the one click Group address to load like I could with OSX 10.7. Any ideas or help is greatly appreciated.
Thanks

Thanks for replying. I did a poor job of explaining my problem. With OSX 10.7, Sending mail from my Mac Pro I was able to add multiple groups to the send line. Using OSX 10.9 I can only add one group, it does not allow multiple's.
I tried the CC line as well as BCC to no avail.
As far as one click, I prefix all groups names with a key double character to keep them together. Now I can type that key characters on the Send To line and bring up the list of groups to select from ( my one click reference).. I use a double ZZ. After selecting the first group, keying ZZ quickly allows subsequent groups etc. to include in the same email. It worked with 10.7, not in 10.9?
Rather time consuming, having to send each group the same email one at a time.
Again appreciate your reply.

How to send an email to group

I am finding it time consuming sending an email to a group. I can't seem to find a way to click the group title and have to add each member individually. Can anyone advise me please

The best work around is to create a new contact with the group name you want to use.
Next, select "add email" then manually add all the email addresses for your group in the single email address field. Separate the email addresses by commas and do not leave any spaces.
For large lists the easiest way to do this is to use something like notepad to edit the text. Then copy and paste the text to the email address field. Do not try and add multiple email address fields for the contact as that will not work.
Example:
My Contact Group Name
[email protected], [email protected], [email protected]
I'm really disappointed that apple doesn't let users do really basic stuff like allowing email groups or printing to network printers. Air print is really lame and so is the native email and calendar apps.
I hope this helps others who are also frustrated with the many stupid little details left out by apple.

Address Book contact info changes after sending an email to contact

So this issue has plagued me for some time and I have finally just been annoyed enough by it to ask.
I have a contact for my mom which used to be her first name and last name which I later changed to just "Mom" in the first name box after getting an iPhone. At the same time I started syncing with MobileMe and have been having this problem for about 2 years.
Every time I send her an email it changes her name from just Mom to Mom and then adds her last name back into the last name field.
Has anyone else experienced this and figured out a fix?

It's very simple why this happens: you're using Address Book incorrectly by not using somebody's first and last name. Mail and Address Book communicate, so every time you send an email to someone, whatever their name is setup as in their email account is what gets overwritten into Address Book when you don't have the same thing.

Add bcc or cc after sending an email

Quite often I send out an email to a group of people and then wish I had bcc'ed another person in for information. What I usually do is resend it with just that person as an addressee, and stick a note at the top of it explaining what I am doing.
However, what would be really nice is to have a feature whereby one can send an email again so just that person gets it, but it has the original header just as if they had been copied in the first place.

Hello,
You can ask for a delivery receipt by this way:
In terminal app, enter:
defaults write com.apple.mail UserHeaders '{"Disposition-Notification-To" = "[email protected]"; }'
where [email protected] is the account mail adress.
This work fine except that it'll don't work if you send a mail to... Apple mail or some other apps that don't support receipt, but using this tip you'll sometime receive read notification
If terminal is a trouble, use notification4mail you can find at http://www.logimac.net/index.html .
Regards
Fred

Outlook 2013 crashes after sending 3 emails

Hi David, thanks for the quick reply. If my reply shows up twice, it's not my fault!
The new profile is just an Outlook profile, not a user profile.
So far as I know, they don't have any spare/unused PCs that I can swap out, but I'll check.
The only PST is for the mail address, there aren't any other accounts or mailboxes in the profile.
The event viewer shows nothing (that I can find, anyway). It seems as if Outlook just locks up before it can tell the system anything.
I am curious about what else "Safe mode" does not do, that normal mode does. All the add-ins remain inactive.
Thanks again for reply, I will test and report back as soon as possible.

Greetings, folks. One of our clients has a PC that will only allow the user to send 3 emails before it locks up. "Outlook.exe" is still running in task manager and cannot be killed. The PC has to be shut down hard (holding the power button in) as it hangs during a soft restart.The PC is a Lenovo E540 running Windows 7 Pro 64-bit. Office is Office 2013 Home and Business with Outlook attached to an Office 365 account. All software up to date.If we start Outlook in Safe mode (just Outlook, not Windows) then everything works fine. I can send dozens of test emails with no problems at all.
So here's what I've done.Disabled Hardware Acceleration, including adding an entry in the Registry (HKCU/Software/Microsoft/Office/15/Graphics/DisableHardwareAcceleration=1) Effect: no change.
Disabled all add-ins. Effect: no change.
Uninstalled the...
This topic first appeared in the Spiceworks Community

Single Mailbox receiving 432-4.3.2 STOREDRV; mailbox server is too busy error emailing distribution group

I have a user who is trying to email a distribution group with approximately 185 recipients, 183 internal, and 2 external.
The user is recieving message delayed/pending for some (but not all) of the recipients. Approximately 15 recipients have recieved the mail including the external recipients and did so shortly after the mail was sent, however, 168 recipients have not recieved
the email and when I search for the mail in Message Tracking on the server, the pending recipients have the following error:
Submitted
04/12/2013 11:56 BTSDCAEXCMDB02.one.local
The message was submitted to btsdcaexccas02.one.local.
Group Expanded
04/12/2013 11:56 btsdcaexccas02.one.local
The list of members of the group "All TCP Users" was expanded so that the message can be delivered to each recipient.
Pending
04/12/2013 11:56 btsdcaexccas02.one.local
The message has been queued on server 'btsdcaexccas02.one.local' since 04/12/2013 11:56:48 (UTC) Dublin, Edinburgh, Lisbon, London. The last attempt to send the message was at 05/12/2013 12:08:22 (UTC) Dublin, Edinburgh, Lisbon, London and generated the error
'432-4.3.2 STOREDRV; mailbox server is too busy 432 4.3.2 STOREDRV.Deliver.Exception:StorageTransientException.MapiExceptionNotEnoughMemory; Failed to process message due to a transient exception with message Cannot set search criteria in SearchFolder. Try
using fewer keywords at the same time, reducing the number of users in the From, To, Cc, and Bcc fields, and reducing the number of mailboxes that are searched at the same time. 16.55847:42000000, 17.43559:0000000090020000000000000000000000000000, 255.23226:2B0A0000,
255.27962:30000000, 255.17082:F0030000, 0.27745:80030400, 4.21921:F0030000, 255.27962:FA000000, 255.1494:00000000, 255.1238:31000000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000,
4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000,
4.7155:F0030000, 4.7155:F0030000, 4.7155:F0030000, 4.6131:F0030000, 4.7728:F0030000, 0.59311:F0030000, 4.8112:F0030000, 255.1750:00000000, 0.26849:00000000, 255.21817:F0030000, 0.30353:00000000, 4.19089:F0030000, 0.18065:0E000000, 4.26257:F0030000'.
05/12/2013 12:08 btsdcaexccas02.one.local
Message delivery is taking longer than expected. There may be system delays. For more information, contact your helpdesk.
Can anyone help as to what is going on here? This only seems to be affecting a single user, and it is intermittent as some recipients received the email, whilst others have not.

Hi Leo,
From your description, I recommend you refer to the following blog to set the values of MaxMailboxDeliveryPerMdbConnections and RecipientThreadLimit.
Store Driver Fault Isolation Improvements in Exchange 2010 SP1
http://blogs.technet.com/b/exchange/archive/2011/04/11/store-driver-fault-isolation-improvements-in-exchange-2010-sp1.aspx
What's more, here is a thread for your reference.
4.3.2 432 STOREDRV.Deliver; recipient thread limit exceeded
http://social.technet.microsoft.com/Forums/exchange/en-US/3b097117-6eb7-4368-b45a-62a4cddf871b/432-432-storedrvdeliver-recipient-thread-limit-exceeded?forum=exchange2010
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Wiki server - stopped after latest update

After updating the last update the wikiserver seemed to have stopped completely. After reading through several posts to move the /library/collaboration/ .db files and applicationsupport/apple/wikiserver files, we are still having a few issues.
Latest log is below:
2011-08-20 23:47:10-0400 [HTTPChannel,118,127.0.0.1] 127.0.0.1 - - [21/Aug/2011:03:47:09 +0000] "POST / HTTP/1.1" 200 129 "http://blueserver.private/groups/" "Mozilla/5.0 (iPad; U; CPU OS 4_3_5 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8L1 Safari/6533.18.5"
2011-08-21 17:25:33-0400 [-] Received SIGTERM, shutting down.
2011-08-21 17:25:38-0400 [-] Stopping
2011-08-21 17:25:39-0400 [-] userPrefsFlushLooper stopped looping, doing final flush
2011-08-21 17:25:41-0400 [-] mailingListFlushLooper stopped looping, doing final flush
2011-08-21 17:25:43-0400 [-] Main loop terminated.
2011-08-21 17:25:45-0400 [-] Server Shut Down.
2011-08-21 17:27:19-0400 [-] Log opened.
2011-08-21 17:27:19-0400 [-] twistd 8.2.0 (/usr/bin/python 2.6.1) starting up.
2011-08-21 17:27:19-0400 [-] reactor class: twisted.internet.selectreactor.SelectReactor.
2011-08-21 17:27:19-0400 [-] Current log level is warn
2011-08-21 17:27:19-0400 [-] twisted.web.server.Site starting on 8086
2011-08-21 17:27:19-0400 [-] twisted.web2.channel.http.HTTPFactory starting on 8087
2011-08-21 17:27:19-0400 [-] Starting
2011-08-21 17:27:20-0400 [-] in migration. repo version is: 23
2011-08-21 17:27:20-0400 [-] Running
2011-08-31 08:46:03-0400 [-] Received SIGTERM, shutting down.
2011-08-31 08:46:03-0400 [-] Stopping
2011-08-31 08:46:03-0400 [-] userPrefsFlushLooper stopped looping, doing final flush
2011-08-31 08:46:03-0400 [-] mailingListFlushLooper stopped looping, doing final flush
2011-08-31 08:46:03-0400 [-] Main loop terminated.
2011-08-31 08:46:03-0400 [-] Server Shut Down.
I thought it might be a firewall issue, but doesnt appear to be the case. I have deleted all the wiki's in hopes there may have been a corrupt file, we only had 3 or 4 running. Still doesnt appear to be helping.
Any help out there is creatly appreciated.
Thanks in advance.
MC

Hi Paul,
Hope you are doing good.
Can you please share the latest logs.
The best option would be to use the 7.20 kernel.
The below links will help you if there are any queries with the kernel update procedure:
SAP Note No. 1636252 - Installing a 7.20 kernel in SAP Web AS 7.00/7.01/7.10/7.11
SAP Note No. 1629598 - SAP Kernel 720 will replace older kernel versions
SAP Note No. 19466 - Downloading SAP kernel patches
Also check:
http://scn.sap.com/docs/DOC-1206
(for Manual Kernel Upgrade)
Thank you!
Kind Regards,
Hemanth
SAP AGS

NCS Server Backup message send via Email

Hi at all,
is it possible to send the message from the NCS Server Backup via Email?
Version 1.1
How can I configure this ?
Thanks in advance,
Mario

Hello,
Apparently it is possible to send email alert if Controller backup failed with this condition:
> Administration > System Settings > Severity Configuration
Category: Controller
Alarm Condition:
Configuration backup failed
But I don't find any alarm condition if Prime Infrastructure Server (or NCS Server) backup fails.
Is there a way to send alert if PI server backup fails ?
Thanks a lot,
Regards

CF8 server can't send an email through Exchange Server

I'm sending this as an Exchange Server Administrator... I'm working w/ our ColdFusion Admin, but he's stuck... so am I.
CFv8 is our version (if you need more I'll get it) We have Exchange Server 2003 Enterprise, on Windows 2003 Server Enterprise.
From what I understand... someone is filling out a form on our CF8 Server... this form is then "sent" to the "forum administrator" (through our Exchange 2003 server) ... This person is "outside" of our Exchange server... [email protected]
This has "Adobe Support" stumped...
I have the CF server "allowed" in the SMTP, Virtual Server, Relay Setting, (and allow all authenticated servers to relay.. also)
I have a copy of his "code" too... (site details removed) ...
<cfmail to="#recipEmail#"        from="#sendersEmail#"        subject="You've got an ePostcard from Our Company!"> #recipName#,     #sendersName# sent you an ePostcard from www.ourcompany.com! You can view your card at http://www.ourcompany.com/pub/ecards/yourEcard.cfm?cardNumber=#getIDNumber.CardID# Your card will be available for 30 days. Delivered by Our Company Send your OWN ePostcard now at http://www.ourcompany.com/pub/ecards/ </cfmail>
So if you have any ideas, please let me know.
Thank you!
JLH

Our Answers below them... I scrubbed out the "real servers and email addresses" from the answers..
I know most of this has been sent in an Adobe Ticket by the CF admin, but I see something isn't right!.
Some questions, based on that assumption:
1) Does the connection to the Exchange server verify in CFAdmin?
Yes
2) Have you switched all the mail logging options on, and set to DEBUG? Anything useful being logged?
"Error","scheduler-4","10/26/09","16:20:25",,"Invalid Addresses"
3) Is the email failing to send from CF, or is it failing to be forwarded by Exchange?
It’s being sent by Coldfusion but getting stuck in the undeliverable dir.
4) Can Exchange log failed / refused connections, and is it logging attempted connections from the CF server?
I trolled all the logs for Exchange, found only one line in months of logs:
A non-delivery report with a status code of 5.1.8 was generated for recipient rfc822;[email protected] (Message-ID <[email protected]>).
10/6/2009
8:39:45   PM
MSExchangeTransport
Error
NDR
3030
N/A
ourmailserver
A non-delivery report with a status   code of 5.1.8 was generated for recipient rfc822;[email protected]   (Message-ID <[email protected]>).
5) Are the messages getting stuck in the spool dir on the CF server, or being placed in the undeliverable dir, or vanishing (suggesting they're being sent)
They are getting stuck in the undeliverable dir.
6) What happens if you set up a simple, stand-alone, test rig with a hard-coded <cfmail> test mail to an email address within your own Exchange system? If that works, try changing it to an "outside world" one.
Tried this and works fine with and address with in our Exchange system and when it is switched to an outside world address it gets stuck in the undeliverable dir like always.
7) Anything in the CF or JRun logs?
This is what we are getting in the Log files as the problem (but anID @ gmail.com is a valid email):
"Error","scheduler-0","10/06/09","15:59:24",,"Invalid Addresses"
javax.mail.SendFailedException: Invalid Addresses;
   nested exception is:
     com.sun.mail.smtp.SMTPAddressFailedException: 550 No such domain at this location ( anID @ gmail.com)
     at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
     at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
     at coldfusion.mail.MailSpooler.deliver(MailSpooler.java:832)
     at coldfusion.mail.MailSpooler.sendMail(MailSpooler.java:731)
     at coldfusion.mail.MailSpooler.deliverStandard(MailSpooler.java:1021)
     at coldfusion.mail.MailSpooler.run(MailSpooler.java:986)
     at coldfusion.scheduling.ThreadPool.run(ThreadPool.java:201)
     at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:71)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 550 No such domain at this location anID @ gmail.com)
     at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
Thank you for your time in looking at this with us!
JLH

Server stops after sending successive email to groups.

Similar Messages

Maybe you are looking for