Server URL in PJC - web deployed

Anyone know how to get the Server URL in a java bean - The applet classes are not normally available?
Mick

Hi,
I am slightly confused. The 501 error is coming from the Glassfish server so I would post into that alias. However I did notice 1 thing. The POST body contents
is "url=%2Findex.html&userName=TECNIC&password=pass"
The content-length is given as 46 but that is 47 chars, That might be caused by the encoding of the "/" as %2F. it looks like "=pass" is being sent as the method.
I would do a separate snoop on the conversation on what is incoming to the Web server as the one above looks confused. We see a POST, which is given a 302 then
a GET. Can you split out both sides so we can see what comes in. Also check for unprinted chars.
regards.

Similar Messages

Web Deploy Package : Create WebDeploy package without installing the web deploy tool on remote server.

Hi,
I didn't get any valid category for this item. Hence creating it under C#.
I have two machines source machine, where the web deploy tool is installed and the target machine where the websites are hosted.
I want to run the web deploy command in the source machine and it has to create the Web Deploy package for the website hosted on the Target server.
Basically the Web deploy tool will NOT be installed on the destination server, but still i want to create packages from it. How this can be achieved?
Regards,
Pradeep R

Hello,
you can move your thread to the asp.net forum, in the installation ans setup section:
http://forums.asp.net/17.aspx/1?Installation+and+Setup

Is there an ITS Mobile Test Server URL available on the Internet anywhere?

All,
I am pretty new to SAP, and have the requirement to prove a connection of my Windows CE5.0 terminal, using Naurtech CETerm 5.5.1. As such I was wondering if anyone out there knows of a test server URL that I could point my device to, to ensure it displays the screens correctly on the QVGA screen?
I am just looking for a test server URL on the web that I can test to. No transactions needed, even something as simple as a lnding page with some graphics would suffice.
Any help is appreciated at this point.
Many thanks in advance.
Nick

Hi Nick,
if you can't find a test-URL on the Internet here you find instructions how to activate a test service on your SAP system
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/6d3cab2dc56a58e10000000a11466f/frameset.htm
regards,
stefan.

Copy file from client PC to server in a web deployed application

I have developed one application using Oracle forms 6i, which is deployed on the web server.
I run this application from a client PC in Internet Explorer using internet.
I want to copy one file from the client PC to the web server.
I have done following things
- Created a shared folder on the server and given full rights to every one on this folder
- I use 'net use' command in my program to connect to this shared folder
- I use copy command to copy file from local client pc to server. This copy command I am executing using host command of my programming (PL/SQL: eg. host('copy abc.txt \\server\share\') )
But this does not work.
When I do the same thing in command window, it works.
(ie. Start-Run cmd to open command window and then type the above copy command)
Can you please tell me, how to copy a file from client PC to the sever in Web deployed application?
Thanks

I downloaded D2KWUtil from the link suggested by you. It has very nice example demo form. But the documentation provided says following
Using D2KWUTIL in Web Deployed Applications
The use of this library is not supported with Web deployed applications.
In a web deployment scenario not all functions within D2KWUTIL will work. Any function that interacts with the User Interface (such as those in the WIN_API_DIALOG package) will fail.
Any interaction with the O/S by other functions will all be executed on the NT server and will act within, or return information pertinant to, the environment on that machine. For instance GET_COMPUTER_NAME will return the Server’s name, not the name of the computer that the Client browser is running on. Likewise COPY_FILE will copy files in the Forms Server not on the Client.
Functions such as those in WIN_API_BITOP will continue to work without change.
so this will not work in web deployed application.
Any other suggestion?
Thanks

RPAS Web Deployment - Error 500--Internal Server Error

Trying to install the RPAS Client 13.2 via the Web Deployment using Weblogic WITHOUT Single SignOn (SSO).
The RPAS.war file was un-jarred, propfile modified and re-jarred. The RPAS.war file was deployed into Weblogic (10.3.2) and is active. When I try to run the RPAS Web Config from Iexplorer, I received the following error message:
Error 500--Internal Server Error
java.lang.NullPointerException
     at com.retek.mdap.server.servlet.ServletManager.init(Unknown Source)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:531)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:235)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Here's the modified propfile:
# The following locations must be configured by administrators based on their
# installation
# /nfs/path/to/data/RPASWebData
# /app/weblogic/rpas132
dbPath=/app/weblogic/rpas132/RPASWebData/db
clientSourceDir=/app/weblogic/rpas132/RPASWebData/client
tunnelLogFile=/app/weblogic/rpas132/RPASWebData/logs/tunnel.NDCVRPASP02.PRODUCTION.FR-PROD.XX.COM.log
webLogFile=/app/weblogic/rpas132/RPASWebData/logs/rpasPortal.NDCVRPASP02.PRODUCTION.FR-PROD.XX.COM.log
isOSSO=false
debug=false
classicMode=false
launchPreinstalledOnly=false
supportMultipleVersions=false
defaultInstallDir=C:\\RPASClient
Edited by: user1438559 on Oct 20, 2010 7:20 AM
Edited by: user1438559 on Oct 20, 2010 7:22 AM
Edited by: user1438559 on Oct 20, 2010 7:22 AM

Addition to my original issue...
Since I could not get the RPAS Web Deployment to work on WebLogic Server (without SSO Support), I thought I would try the install on Apache Tomcat.
This worked out of the box without any issues, so it seems my issue is on the WebLogic Server. Does anyone have any feedback on why it doesn't work on WebLogic?

Force the web server url to hit the particular jboss instance(slot)

Is there a way we can force the web server url to hit the particular jboss instance(slot)? I remember we can do in DAS by passing the drp port in the webserver url.
Edited by: 865729 on 20-Jun-2011 01:30

This isn't the best forum for this question (you might get better results posting this to the JBoss coummunity: [http://community.jboss.org|http://community.jboss.org] ) but I think you can accomplish this by putting a dummy jsessionid in the URL (on the first request so that no jsessionid exists) and appending the jvmroute of the instance you want to hit. The jvmroute is what determines which instance mod_jk routes the request to so theoretically this should work.
- George

Portal with a URL using a Web browser in java stack

Dear all,
I can access the portal with our URL using a Web browser from your client machines .
i got the following option :
SAP Library
SAP Library contains the complete documentation for SAP Web Application Server.
Web Services Navigator
Web Services Navigator is a tool that gives you a short overview of a specific Web service based on its WSDL, and enables you to test your Web service by creating and sending a client request to the real end point.
System Information
System information provides administrators with an overview of the system configuration and its state. It shows all of the system's instances and processes, their current state and important parameters (such as ports) that may be required for support cases, as well as the versions of the components installed.
UDDI Client
The UDDI client provides query and publishing functions for different Web service entities (tModels, business services) to any UDDI compliant registry.
User Management
The user management administration console provides administrators with the functions they need to manage users, groups, roles, and user-related data in the User Management Engine (UME). Users without administrator permissions can use it to change their user profile.
Web Dynpro
Web Dynpro is a User Interface technology available within the SAP NetWeaver Developer Studio.
Various Web Dynpro tools provide administrators and application developers with performance measurement and application administration capabilities. The Web Dynpro runtime is already deployed.
SAP NetWeaver Administrator
A tool for administration and monitoring, offering a central entry point to the whole SAP NetWeaver system landscape. The SAP NetWeaver Administrator can be used in a central scenario where it is capable of operating an entire system landscape containing ABAP and Java systems as the application platform of SAP NetWeaver.
J2EE Engine Examples
This section contains several J2EE application examples that run on the J2EE Engine. The examples show some of the functions of both Java and the J2EE Engine. They can be easily deployed and tested by simply clicking on a button. The full source code of the examples is also available.
when i click System Information:
it ask user name () J2EE_ADMINand password (Installtion master password) ,after entered , i got below error .
You are not authorized to view the requested resource.
Details: No details available
Kindly suggest .

Hello
It means what it sais, your J2EE_ADMIN user doesn't have enough authorization.
Chech if the appropriate authorization is assigned in your abap stack which belongs to the java stack you logon to:
Role SAP_J2EE_ADMIN should be assigned to user J2EE_ADMIN.
Kind regards
Tom
Edited by: Tom Cenens on Dec 17, 2010 2:55 PM

Report Server URL field no longer visible in Dashboard Designer after applying SP1 and the October 2011 CU

Environment: 1 WFE on W2K8Ent x64 SP2 | 1 App Server on W2K8 Standard x64 SP2 | 1 Dedicated SQL Server 2008 R2
SharePoint 2010 Enterprise Edition
I recently applied SP1 and the October 2011 CU (Server updates, not foundation) on both the WFE and the App server and now I'm experiencing an issue with PerformancePoint Dashboard Designer in that when I want to deploy a new SSRS report, I no longer have
the ability to indicate the report server url under the report settings section because it's missing. I also do not have the ability to preview the report nor can I modify any of the settings like Zoom or Format as they're greyed out.
I've been researching for several days now and cannot find anything to remedy my issue. I have reviewed the upgrade logs on both the WFE and App server ... I ran the product config wizard after applying the SP and the update ... Sharepoint is configured
to use Windows Integrated Mode for the reporting services configuration via Central Admin.
I noticed that the web config for my app was updated and compared that against a backup of the old web config and I mainly see diffs in version references for reporting services, etc. (Ex. version 10 in the old, 11 in the new/updated config file).
Anyone else out there have this same issue? Any suggestions would be greatly appreciated!
Thanks,
Chad

Ultimately, I ended up installing SharePoint 2010 RTM on a separate system and then copied the folder with the PerformancePoint Dashboard Designer and put that on my PC at work. If you open a PerformancePoint report inside SharePoint, it
will default to the version of the update so be sure to open up the designer from wherever you store it on your PC. You'll know if it's the right one anyways if the URL is missing.
Also, once you've opened the RTM version, this will be the one that opens from the SharePoint shortcut via the Windows Start->All Programs->SharePoint Folder.
Chad Barrett

Web Deploy error - "This method is not supported by this class"

I have an MVC project which I am trying to deploy to one of our internally-hosted web front end servers via a TFS build process. Our server hosts the MS Deploy service, and other solutions deploy without problems to the same box. The parameters for the build
process are as follows:
/p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:MSDeployPublishMethod=WMSVC /p:MsDeployServiceUrl=https://<server>:8172/msdeploy.axd /p:DeployIISAppPath="<internal.site.com>" /p:username=<username> /p:password=<password>
/p:IncludeIisSettingsOnPublish=false /p:AllowUntrustedCertificate=True /p:OutputPath=bin\ /p:SkipExtraFilesOnServer=True /p:VisualStudioVersion=11.0
The error message I receive at the point the build reaches the deployment activity is:
Web deployment task failed. (Could not complete the request to remote agent URL 'https://<server>:8172/msdeploy.axd?site=<internal.site.com>'.)
Could not complete the request to remote agent URL 'https://<server>:8172/msdeploy.axd?site=<internal.site.com>'.
The request was aborted: The request was canceled.
This method is not supported by this class.
We've found
this StackOverflow post which describes the same error we're experiencing, however the suggested solution is something we already do in our server configuration, so this doesn't resolve the issue for us.
Has anyone seen this error before, or is able to make any suggestions why it is happening?

Hi Matt,
You have to have a look in the build log then copy the command that is under Run MSBuild node and executed it on the build agent.
You should find something like below:
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\MSBuild.exe /nologo /noconsolelogger "C:\Builds\....sln" /nr:False /fl /flp:"logfile=C:\Builds\...log;encoding=Unicode;verbosity=normal" /p:SkipInvalidConfigurations=true /p:CreatePackageOnPublish=true /p:DeployOnBuild=true /p:SkipExtraFilesOnServer=True /m /p:OutDir="C:\Builds\...\bin\\" /p:Configuration="DEV" /p:Platform="Any CPU" /p:VCBuildOverride="C:\Builds\....sln.Any CPU.DEV.vsprops" /dl:WorkflowCentralLogger,"C:\Program Files\Microsoft Team Foundation Server 12.0\Tools\Microsoft.TeamFoundation.Build.Server.Logger.dll";"Verbosity=Normal;BuildUri=vstfs:///Build/Build/31630;IgnoreDuplicateProjects=False;InformationNodeId=14;TargetsNotLogged=GetNativeManifest,GetCopyToOutputDirectoryItems,GetTargetPath;LogProjectNodes=True;LogWarnings=True;TFSUrl=http://...-tfs:8080/tfs/...;"*WorkflowForwardingLogger,"C:\Program Files\Microsoft Team Foundation Server 12.0\Tools\Microsoft.TeamFoundation.Build.Server.Logger.dll";"Verbosity=Normal;" /p:BuildId="aa2d3857-27e9-4854-b44f-4ca625ccd786,vstfs:///Build/Build/31630" /p:BuildLabel="..._2015.02.27.2" /p:BuildTimestamp="Fri, 27 Feb 2015 11:16:41 GMT" /p:BuildDefinition="..."
Daniel

Launching Browser Window from Web Deployed Forms App.

Has anyone launched a new browser instance on the client within a web deployed forms application? We have browser based help within our application. In the client/server version, we used the built-in HOST command to launch the browser when the help button is clicked. However, this does not work in a web deployed situation. First, because we are deploying the application on a Solaris box, and it does not recognize the host command, and second even if we could it would launch the browser on the server. Can I do something with java or javascript?

Why don't you use the web.show_document(url, '_blank') built-in?

Url-template-config Error Deploying app in WLS9.1

I am trying to deploy my application in WLS9.1 and using jdk1.5.0_08. I am getting url-template-config error. There is this file "url-template-config.xml"at
\weblogic91\server\lib\consoleapp\webapp\WEB-INF which is where this error arises and inside that file the schema definition is:
<url-template-config
xmlns="http://www.bea.com/servers/weblogic/url-template-config/8.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/servers/weblogic/url-template-config/8.0 url-template-config.xsd">
Why is weblogic 9.1 using a 8.0 defined template and is this the main problem? Please do help me out.
-Thanks

Hi
Did you get solution for url-template-config issue with weblogic 9.1 . Iam also getting the same error
15:23:22,531 [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR URLTemplateDescriptor:152
- Exception while loading URL templates, /WEB-INF/url-template-config.xml
Throwable: javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismat
ch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
Stack Trace:
javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected
"" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:131)
at org.apache.beehive.netui.core.urltemplates.URLTemplateDescriptor.load(URLTemplateDescriptor.java:133)
at org.apache.beehive.netui.pageflow.PageFlowContextListener.performInitializations(PageFlowContextListener.java:102)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.init(PageFlowActionServlet.java:120)
at com.bea.console.internal.ConsoleActionServlet.init(ConsoleActionServlet.java:185)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:94)
at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Please let me knwo
Thanks
Binu

Help with JSR-168 Remote Server URL Setting

Installation file just says:
Note: Before placing the portlets on a page, edit the JSR-168 Remote Server object
and change the Remote Server URL to the correct address of the host computer.
What should it be? This is not enough information for me.
Thanks,
user450158

Never mind... I figured it out. It should be set to whatever makes the URL for the web services correct; i.e. wherever the JSR168 sample portlets WAR file is deployed. In my case: http://qlv-ows-i-1.ql.local:7071/

7.5 SP3 New Server - Runtime Error on Web Page

Hi experts
I have added a new web server to an existing BPC installation.
The environment is load-balanced, 7.5 SP3, built on windows server 2003 SP2, with SQL 2008 SP1
I used the prerequisites:
Xceed v6.5
Antixscript v3
However, when I try to open the /osoft page directly on the new server, I see the error shown at the bottom of this page.
I checked the DLLs against those on the 2 working servers, and they are the same.
I have copied the antixscript dll from system32 to websvr\bin, as I have seen similar problems before and this has resolved it.
Unfortunately, it hasn't worked this time.
I have also checked that I can log my PC (windows 7, IE8) into either of the existing web servers, and they work fine
I have also opened the web site directly on the new server and that works fine (although it offers nothing but Web and Admin, as Excel is not installed)
I really need to get this server up for user testing first thing in the morning (UK time)
Does anyone have any suggestions?
Thanks
ERROR DETAILS:
Server Error in '/OSoft' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

Quick update:
I'm removing BPC and reinstalling, as the issue definitely lies within BPC and/or its associated Web Site.
I know this as I am able to successfully connect from a client PC to to Reporting Services website.
If anyone has any suggestions, now would be a great time to make them known.
Thanks again

TEXT_IO.FOPEN not working on web deployed app FORMS 6i

Hi all
I have coded parsing file by using TEXT_IO.GET_LINE but it seems that my file even can't be opened.
declare
file1 text_io.file_type;
filename1 varchar(256);
linebuf varchar2(100);
begin
file1 := TEXT_IO.FOPEN(:CSV.CSV_PATH, 'r');
Text_IO.Get_Line(file1, linebuf);
if linebuf!='blablablablabla' then msg('line is OK!');
else msg('Line is wrong!');
end if;
TEXT_IO.FCLOSE(file1);
end;
On local machine when i enter into :CSV.CSV_PATH "C:\details.txt" the file gets loaded because it gets processing, I can see messages.
When I upload form onto remote web-deployed app server, I enter into path "D:\details.txt" (I cannot write on C:, the files are the same) nothing happens. Does it mean text_io won't work on Fomrs6i web-deployed? How can I investigate this issue.
Thanks in advance
Tome

With Forms Server deployments. TEXT_IO writes the file on the Forms server not the local PC as it did in client-server mode.
Here are some workarounds
1) Download the WEBUTIL add-on from Oracle and use its TEXT_IO package to write to the local file.
WebUtil is an essential add-on loaded with goodies such as a file browse dialog for local files. Its easy to use and is designed to be compatible with other oracle routines like TEXT_IO.
Kudos to Duncan Mills at Oracle for this top add-on - dont leave home without it.
www.oracle.com/technology/products/forms/htdocs/webutil/webutil.htm2) Use the original TEXT_IO (as you are now) to write to a file on the Forms Sever , then display it in a browser window using WEB.SHOW_DOCUMENT
3) I remember seeing some some old Java scripts on OTN to write to local PC.
MY APOLOGIES for #3. Most forum posts can be solved with that little gem of an answer. "My sink is blocked" ... "yeah I saw some java code to fix that"

"ERROR_DESTINATION_INVALID: Web deployment task failed" when trying to deploy site

I'm working on our CI process for auto-publishing WebJobs along with a host WebSite for said jobs. This isn't working, but that's not the point at the moment.
The site in question is called devpandajobhost.azurewebsites.net and I have created (and deleted
and recreated) and published to this site successfully many times, from both msbuild and VS.
However, earlier today, my publish commands have started failing with
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\Web\Microsoft.Web.Publishing.targets(4253, 5): error ERROR_DESTINATION_INVALID: Web deployment task failed. ( Could not connect to the remote computer ("devpandajobhost.scm.azurewebsites.net"). Make sure that the remote computer name is correct and that you are able to connect to that computer. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_DESTINATION_INVALID.)
or (from vs)
Error 4
Web deployment task failed. ( Could not connect to the remote computer ("devpandajobhost.scm.azurewebsites.net"). Make sure that the remote computer name is correct and that you are able to connect to that computer. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_DESTINATION_INVALID.)
0 0
JobHost
It looks like the scm site for my site doesn't exist. I have tried deleting and recreating my site several times, through various different mechanisms (VS new project, portal, powershell). The site can be created but when I publish to it I get the error
above.
What is going on?
PS my theory is that I deleted and recreated it and the Azure internal DNS server has got in a pickle

it is not only internal Azure DNS but your DNS provider as well. Since DNS records are propagated and cached (and negative cached as well) you need to wait for some time for negative cache to expire.
I see no good reason to go through the cycle of creating new site every time unless this is your scenario. If so you can delete the old one and create always sites with new name.
Galin Iliev [MCSD.NET, MCPD], http://www.galcho.com

Server URL in PJC - web deployed

Similar Messages

Maybe you are looking for