Servername and virtual host name is the same - how to handle this
Hi,
I set up a server with the hostname yxzwiki.org
In the Server app under Websites this domain points to /Sites
In this /Sites directory is all my content (several Wikis) and also the phpmyadmin.
What is the issue now?
I want this xyzwiki.org not only as the hostname but as a virtual host as well.
So I have the following entry in the corresponding conf file.
<VirtualHost *:80>
ServerName xyzwiki.org
ServerAdmin [email protected]
DocumentRoot "/Sites/xyzwiki/xyzenwiki"
DirectoryIndex index.html index.php
How can I handle this?
xyzwiki.org shows the content of /Sites/xyzwiki/xyzenwiki but I cannot e.g. get access to http://xyzwiki.org/phpmyadmin
Any ideas?
Thanks
Tristan
I guess I have talk more about this issue that people got the chance to help
xyz.org is the host name of our server.
The intention of this server is to run a wiki via mediawiki.
When we first set up the server we planned to have three language versions and the corresponding wikis were found on the server under
en.xyz.org for the English version
de.xyz.org for the German and
es.xyz.org for the Spanish version
But then we decided ONLY to concentrate on the English version and so prefix en became deprecated and we only want the domain xyz.org that shows the English Wiki.
The English wiki is on our server under /Sites/xyz-wiki/xyz-enwiki
In the Server.app I defined /Sites as the server website and I have a virtual host for xyz.org AS WELL that defines /Sites/tangowiki/tangoenwiki.
This seems to overrule the entry in the server.app as xyz.org shows the content of /Sites/xyz-wiki/xyz-enwiki
As I have other "services" as well under /Sites, e.g. phpmyadmin it is not possible for me with xyz.org/phpmyadmin to get to this service.
So what I am looking for is a trick that I can keep the /Sites directory as the main directory for xyz.org. I was thinking of a symlink for the index.php from /Sites/xyz-wiki/xyz-enwiki and to remove the virtual host entry but this does not work. Any other ideas.
Cheers
Tristan
Similar Messages
-
How to mute and lock screen rotation at the same time? Loved this feature in iOS 5.
How to mute and lock screen rotation at the same time? Loved this feature in iOS 5.
You cannot do two different simultaneous VISA writes over a serial bus. There is a single rx line on the pc's com port and a single rx line on the instrument. You only hope is if the instrument allows you to chain commands and the reception of the carriage return triggers the instrument to implement both at the same time. Maybe you can send CTS01 and CTS02 separated by a space or comma. The manual should tell you if that's possible or maybe you need to ask the manufacturer.
-
How to get a virtual host name from application in Tomcat?
Hi,
Is it possible to obtain the context path and virtual host name at the application (.war file) initialization stage?
I need to set up these info into my application config table.
ThanksI think it is impossible. It seems the application has no access to the host configuration which it is running in.
-
What's the difference between the notion of virtual hostname and of host name
Hi everybody,
Sorry for this stupid question, but I don't see the real difference between the
notion of virtual host managed by WLS and the notion of host names managed by
a DNS. With the admin console of WLS, I can create a virtual host, e.g. www.toto.com
, and associate it with a WLS cluster for example. But with the DNS, I must also
bind 'www.toto.com' to the list of WLS servers contained in the cluster above
in order to be sure that WLS can make load-balancing. (See WLS clusters documentation).
Can somebody show me an example of the use of virtual hosts and hostnames, which
can help me to understand the differnece between?
Thanks for your help
Vincent
HI
Basically Name Based Virtual Hosts are helpful to give multiple names to be tied
to a single IP Address rather than IP Based Virtual Hosting. In your case if your
virtual host name www.toto.com which basically served by the weblogic cluster
instances need to be configured by DNS server so that using this technique many
different hosts can share the same IP address. We need to configure DNS server
to map each host name to the correct IP address.
regards
Sasikanth
"Vincent Ducret" <[email protected]> wrote:
>
>Hi everybody,
>
>Sorry for this stupid question, but I don't see the real difference between
>the
>notion of virtual host managed by WLS and the notion of host names managed
>by
>a DNS. With the admin console of WLS, I can create a virtual host, e.g.
>www.toto.com
>, and associate it with a WLS cluster for example. But with the DNS,
>I must also
>bind 'www.toto.com' to the list of WLS servers contained in the cluster
>above
>in order to be sure that WLS can make load-balancing. (See WLS clusters
>documentation).
>
>Can somebody show me an example of the use of virtual hosts and hostnames,
>which
>can help me to understand the differnece between?
>
>Thanks for your help
>Vincent
-
Hi,
I have removed a successfully installed Grid Infrastructure Software. Now I was again installing it but the Installer is complaining about "[INS-40912] Virtual host name assigned to another system on the network", which it was not complaining about in the first installation process. :/
EDIT: I have checked and the two cluster-nodes are interpingable through their virtual IP's.
I see that the previous installation has created an own interface for that virtual IP:
eth0:2
Link encap:Ethernet HWaddr 00:50:56:B9:0E:AA
inet addr:10.200.11.159 Bcast:10.200.11.255 Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:19 Base address:0x2000OK Solved: I just did:
ifconfig eth0:2 down -
How do I "scan" my LAN and find the host name of the server computer?
I need to scan my LAN to find out the IP and host name of the computer in which is waiting for client acceptance because the server side of my program is not always on the same computer. Therefore, the IP and host name of my server is not final and can be placed on any computer on my network with over 50 connected computers. How might I check to see which computer is waiting for a client?
EDIT: I need the host name only, disregard IP
Thanks!watwatacrazy wrote:
jwenting wrote:
Peter__Lawrey wrote:
If you know the port you can try to connect to each of the machines in turn.the people getting firewall warnings about intrusion attempts would just love that, as would the network admins whose network you're clogging with traffic (imagine several hundred clients doing that all day long, let alone tens of thousands).
If they are all one the same subnet you can use the IP addresses.Which you don't necessarilly all know. Or do you propose just sweeping through all possible IP addresses in the subnet's range? That would be a sure trigger for your network admins to immediately kick you out.
This should take a few seconds at most.Until the automatic safeguards kick in and you're thrown off the net :)In that case, what would you suggest?Not to bother. The server address should be part of the application configuration, not guessed at runtime. -
When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer keyboard, and since my password consists of letters, numbers and symbols, the ipad keeps displaying "incorrect password". Is there any way around this please anybody?
katykittenoid wrote:
the virtual keyboard is not the same as my computer keyboard
Are you using the virtual keyboard to input your password and you cannot see/find the characters you need on that keyboard?
Or are you trying to use a bluetooth keyboard and pressing the printed key does not produce the right character? -
Bean property and public field found with the same name: getid
Hi all,
I have a ejb jar file contains some local entity beans and one session bean
, the session bean has some functions suck as findXXXByQuery() , InsertXXX()
, and I have created some model class for the entity bean , and use it as
the parameter or return type of the session bean , then I want to transfer
the session bean as a webservice , using ant automaticly . All this function
successfully in weblogic 6.1 , but when I want to run ant command in
weblogic 7.0 , an error occured :
[servicegen] weblogic.xml.schema.binding.BindingException: Error: bean
property
and public field found with the same name: getid
Yes , I have a getid field in table , a getid in entity bean , and a getid
property in model class , but what different does it make ? Would you mind
to test my jar file ? I send all files as attachments .
Any advice will be appreciate .
lcl
[build.xml]
[work.jar]In article <[email protected]>, lcl <[email protected]> wrote:
-=-=-=-=-=-
Hi all,
I have a ejb jar file contains some local entity beans and one session bean
, the session bean has some functions suck as findXXXByQuery() , InsertXXX()
, and I have created some model class for the entity bean , and use it as
the parameter or return type of the session bean , then I want to transfer
the session bean as a webservice , using ant automaticly . All this function
successfully in weblogic 6.1 , but when I want to run ant command in
weblogic 7.0 , an error occured :
[servicegen] weblogic.xml.schema.binding.BindingException: Error: bean
property
and public field found with the same name: getid
Yes , I have a getid field in table , a getid in entity bean , and a getid
property in model class , but what different does it make ? Would you mind
to test my jar file ? I send all files as attachments .
Any advice will be appreciate .
lcl
-=-=-=-=-=-For better or worse the JAX-RPC spec requires this behavior. From
section 5.4.1:
"There is no standard mapping for the case when a JavaBean property
has the same name as a public field. A Java to XML mapping
implementation is required to flag this case as an error."
Since you are not the first person to run into this restriction I'm
beginning to think we need an option to bypass it.
--Scott -
Change IP and Host name of the server
Hi,
Db :11.2.0.3
Os:Aix6
OS team are going change IP address and host name of the server which has ASM and DB.
What are the things we need to follow for this?
Thanks & Regards,
VNOS team are going change IP address and host name of the server which has ASM and DB.
What are the things we need to follow for this?1. TNSNAMES.ORA files everywhere
2. LISTENER.ORA on server
If there are thin JDBC clients, change IP/hostname in their connection URLs. -
I have an email account through yahoo. I am having trouble setting it upon my iPhone and can't receive or send emails!!!! I contacted Rogers and they said I need to find out the host name of the incoming server, in other words yahoos host name. Help!!
Yahoo's servers are notoriously unreliable. Use the "Yahoo" account type when setting it up. If it doesn't work, and you are positive the credentials are correct, wait a while and try again.
While you're waiting, set up a free gmail or iCloud email account. -
Dng and tif file with the same name, in the same Lightroom folder
If I have both a dng and tif file with the same name, in the same Lightroom folder, I can only see and access one of them. Is there a setting I can change in order to see both of them?
If you can only see one of them, which one can you see?
Was the DNG and the TIF imported at the same time?
How are you trying to "access" the files?
The more details you can provide, the more likely it is that someone will be able to help you. -
I'm trying to figure out how to obtain the virtual host's name that a particular piece of code is running under. I am using Oracle 9i OAS.
I was looking at the ServletContext object, thinking I could get the virtual host name. However, that looks like a dead end.
Can someone help me with this?
ThanksWayne,
TUX 8.0 Patchlevel 135 (I think) Solaris 2.8. The PMID thing works for us, tho.
The HA software is Veritas VCS.
Thanx...
"Wayne W. Scott" <[email protected]> wrote:
Alex:
It would help to know which version of Tuxedo you are using and on what
platform?
I have seen numerous cases with Tuxedo running on HP MC Service Guard
with PMIDs.
I worked a case in which the customer was doing the same on a UNISYS
system. The
configuration details are different for each. That's why it pays to
be specific.
Thanks,
Wayne Scott
Alex Wolfson wrote:
We use veritas/vcs software to enable failovers. THis scheme uses avrtual host
name so that none of the failed over configurations need to be chngedat fail
over time. While this works just dandy for ORACLE, MQ and other 3rdparty packaged
we use, TUX seems to be very unhappy with such an idea.
tmloadcf complained when I put the vrtual host name as the PMID inthe machines
section that tmloadcf had to run on the master node. I trussed thetmloadcf and
discovered that tmloadcf uses uname to verify what UNIX host name isto be used.
Clever fellow that I am, I wrote a program that uses tpadmcall to changethe PMID
after the tmloadcf is done. the change pmid program worked just fine,I was able
to verify this by using tmunloadcf.
Trouble is that tmboot ALSO uses uname to verify that it is runningon the MASTER
machine. Other than changing how we do failovers, which aint likelyto happen,
anybody know of a workaround here?
TIA...
Alex -
HOW TO DEFINE VIRTUAL HOST NAME IN HPIA64 + SAP R/3 ENTERPRISES 4.7
Hi all,
I am trying to install sap r/3 enterprises 4.7 with OS as HP-UX and Database as Oracle in a cluster environment.
In cluster environment sap installation should be done on virtual hostname ( package id ). I'm using the env variable SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
My cluster is running and I'm able to ping it from network, but at the time of SAP Installation my sapinst starts with the physical host name not with the virtual host name.
What can be the solution ..?
Thanks,
Chandresh Pranami.Hi Chandresh,
Try executing sapinst with virtual hostname.
eg. ./sapinst SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
This should work.
-Pinkle -
I’m trying to send email using exchange send connector STARTTLS setting to the SMTP server. I have read multiple documents on configuring TLS for send connector, but they talks about outbound connections to internet facing servers. My Exchange 2013 and SMTP
server is in the same domain (let’s say A.com) and I’m creating dummy domains on my SMTP server (e.g.
[email protected],
[email protected] ) and their respective send connectors on the exchange server end. In the smart host section added the IP address of the SMTP server and in the scoping section added the SMTP domain address (e.g. dummy1.local ). In the FQDN field, added
the FQDN of the exchange server 2013 which certificate is enabled with SMTP service.
Could you tell me a step by step procedure, where I’m going wrong or any extra settings needs to added?
Presently, it is giving me an error that 530 5.5.1 TLS encrypted connection is required.
Note: I’ve created the Microsoft CA certificates for the SMTP and exchange servers and imported them in the personal certificate container. In which, the exchange certificate is created with FQDN name of the server and enabled for the SMTP service.
I’m using OPENSSL certificate for making the SMTP server TLS enabled. (let me know, if I need to import the OPENSSL certificate anywhere on the exchange end)?
Thanks!-IgnoreSTARTTLS is set to false on the send connector properties.
I'm trying to established a HTTP over TLS connection. I'm not using mutual TLS between these two server.
The send connector protocol logging is attached as below,
2014-09-22T20:09:45.468Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,2,10.219.3.74:24939,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:45.546Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,3,10.219.3.74:24939,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,4,10.219.3.74:24939,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,5,10.219.3.74:24939,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,6,10.219.3.74:24939,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,7,10.219.3.74:24939,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,8,10.219.3.74:24939,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,9,10.219.3.74:24939,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,10,10.219.3.74:24939,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,11,10.219.3.74:24939,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,12,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,13,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,14,10.219.3.74:24939,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,15,10.219.3.74:24939,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,16,10.219.3.74:24939,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:45.640Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,17,10.219.3.74:24939,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:45.655Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,18,10.219.3.74:24939,10.219.3.73:25,>,STARTTLS,
2014-09-22T20:09:45.671Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,19,10.219.3.74:24939,10.219.3.73:25,<,220 2.7.0 Ready to start TLS,
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,20,10.219.3.74:24939,10.219.3.73:25,*,,Sending certificate
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,21,10.219.3.74:24939,10.219.3.73:25,*,CN=Exchange.A.local,Certificate subject
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,22,10.219.3.74:24939,10.219.3.73:25,*,"CN=DC-CA, DC=A, DC=local",Certificate issuer name
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,23,10.219.3.74:24939,10.219.3.73:25,*,63E7E70100000000000B,Certificate serial number
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,24,10.219.3.74:24939,10.219.3.73:25,*,CAEB1200CDF49715E5F2E4B8315EFDDC01F8F945,Certificate thumbprint
2014-09-22T20:09:45.780Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,25,10.219.3.74:24939,10.219.3.73:25,*,Exchange.A.local,Certificate alternate names
2014-09-22T20:09:46.654Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,26,10.219.3.74:24939,10.219.3.73:25,-,,Local
2014-09-22T20:09:46.669Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,0,,10.219.3.73:25,*,,attempting to connect
2014-09-22T20:09:46.685Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,1,10.219.3.74:24940,10.219.3.73:25,+,,
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,2,10.219.3.74:24940,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,3,10.219.3.74:24940,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,4,10.219.3.74:24940,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,5,10.219.3.74:24940,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,6,10.219.3.74:24940,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,7,10.219.3.74:24940,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,8,10.219.3.74:24940,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,9,10.219.3.74:24940,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,10,10.219.3.74:24940,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,11,10.219.3.74:24940,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,12,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,13,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,14,10.219.3.74:24940,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,15,10.219.3.74:24940,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,16,10.219.3.74:24940,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,17,10.219.3.74:24940,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,18,10.219.3.74:24940,10.219.3.73:25,*,,sending message with RecordId 52652004081667 and InternetMessageId <[email protected]>
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,19,10.219.3.74:24940,10.219.3.73:25,>,MAIL FROM:<> SIZE=7653 BODY=BINARYMIME,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,20,10.219.3.74:24940,10.219.3.73:25,>,RCPT TO:<[email protected]>,
2014-09-22T20:09:46.825Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,21,10.219.3.74:24940,10.219.3.73:25,<,530 5.5.1 A TLS-encrypted connection is required,
2014-09-22T20:09:46.950Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,22,10.219.3.74:24940,10.219.3.73:25,<,503 5.5.1 unexpected RCPT command,
2014-09-22T20:09:46.981Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,23,10.219.3.74:24940,10.219.3.73:25,>,RSET, -
Getting the host name in the email subject line
I am running SCOM 2012. Is there a way to have the host name of the server in the Subject line of an email?
As alerts dont always have a servername included. ie Alerts usually have the name of the server or source included in Source or Path you might want to include both in the subject.
Here is what we use but you can add the lines found in the body to the subject:
Source: $Data[Default='Not Present']/Context/DataItem/ManagedEntityDisplayName$
Path: $Data[Default='Not Present']/Context/DataItem/ManagedEntityPath$
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Maybe you are looking for
-
In iTunes, is there a way to find previous back-ups that are older than my current back-up or sync? I am looking for lost appt. info.
-
How do aperture and iphoto interact
I am purchasing a new imac this week and am trying to get an idea on what software I want. I've been using adobe photoshop elements for the past few years when I needed to fix any photos and iphoto to sort and 'hold' my collection. I've been readin
-
Duplicate method at internal Class
Hi All: I was working in my Web Dynpro when I got these errors in the build: The method wdCreateUITreeForTransparentContainer() is undefined for the type InternalCreatePolitics InternalCreatePolitics.java NWD_agiletrk_Dpmg_hr_politicswebdynpr
-
hi all, in service order(cs), i have two costs. while billing it, i want to use two different materials - one for activity cost, another for material cost (in debit memo, i have two items for each of them. but the material numbers are the same. i wan
-
Authorisation group and document type
Dear Experts I want our users who are using transaction F.14 to be able to process document type ZF only. I have created a role and in the authorisation object F_BKPF_BLA i can see field authorisation group and activity. What value i should put in th